Update Satellite Pro 420 CDT to Windows 98

Similar Questions

• Drivers for Toshiba Satellite Pro 420

  Hello! I need drivers for Toshiba Satellite Pro 420 for Windows 98. My e-mail address: [email protected]. Thank you! (I'm sorry, I don't speak English)

  Post edited by: rft2

  I checked the Toshiba download page, and unfortunately this old book is not listed there.
  Single Satellite Pro 4220.

• Search for USB driver for Satellite Pro 460 CDT

  I own an old Satellite Pro 460 CDT including enhanced Port Replicator III (P1, 166 MHz), installed is Windows 2000 SP 4.

  Manager device shows me there is a problem with the USB controllers, there is an "unsupported NEC USB-to-PCI-Openhost-Controller", the driver has not been installed by Windows. Uninstall and new material research will not change anything.

  USB is necessary for the intended use.

  Then, is less for a driver job?

  Hi, Ralf

  Problem is that this device is not supported for Win 2000 and load on the Toshiba download page, you will not find anything. I know, this unit is about 10 years old and I think you expect a little too much of this good old classic.

  If you want to use with a maximum and preinstalled well performance install support OS Win 95. For Win 95, you will find all the drivers and tools on Toshiba download page.

• Satellite Pro 430 CDT - boot disk problems

  I have a toshiba satellite pro 430 cdt which I am trying to re - install windows 95 (I have win 95 on cd) on with no luck at the moment.

  I downloaded the two files from bootdisk from www.bootdisk.com, win95a and win95b, but have neither the right cd rom driver, so then I got put www.driverguide.com driver this driver on startup disk and change the config file to use the correct driver and I always get the message that no driver for cd rom drive was found.

  I don't know if the cd rom drive no longer works, even if the green light on the side flashes when you eject the disc that told me that things seem ok (maybe wrong here however). I have the cd rom plugged into the Bay on the right side of the machine (internal) and drive in the caddy it is connected on the left side of the machine (external) and even if I swap them on the cd rom drive does not work but the floppy drive works in two ways. If the connector edge on the cd rom drive doesn't work properly or the drive itself is shot.

  If I remember correctly when the boot disk works correctly it should give you 3 or 4 options (don't remember that it was a long time ago I finally did, and I did not work boot disc, DOH!), which one should be something like, "install windows with the cd rom support" or something like that.

  Once I get this I am ok I have win 95 on cd, and it is quite simple installation there from there that I built a few pc and installed different versions of windows with no true front hassels.

  Did he have the same machine as me (uk version) and able to compress all the files on a boot floppy from win 95 work and e-mail it to me?

  Or just files autoexec.bat and config.sys are all I really need (as long as they work those). Anyone know anywhere I can get my hands on one set of diskettes originally supplied with the machine that I seem to have lost mine, I think there were two or three players but no windows cd, I bought my copy (legit) from a computer fair years.

  Will provide you with my e-mail address later if necessary.

  Thanx

  Steve Jones

  Hi Steve

  I found the information that the device was shipped with 10 x player XM - 1502-B.

  Check this box:
  http://www.cdrom-drivers.com/companies/1066.htm

  There you can find a lot of drivers for different units. But maybe it's something wrong with the occupation of s PIN. In addition, you can ask the service partner for advice.

  Good bye

• Performance on a Satellite Pro A120-185 with Windows Vista problems

  Can someone help me with this.
  My laptop is a new Satellite Pro A120-185 with Windows Vista.

  I had my last configuration less portable, but you know what? He was faster!

  I'm supposed to have cetrino duo 2, 2 GHz and cach of 4 MB, FSB 667 MHz, RAM 1 GB, even though they are at 533 MHz, 100 GB 5400 RPM HARD drive / MIN.

  It is slow, not only starting, programs opening, plays something, the browser and even to copy from the CD to the hard drive sometimes give me time 4 days left!

  Clicking on something takes forever. What's wrong?
  Need less to say that with vista no and I mean none, of my devices are busy. Dongle Bluetooth, USB disk, printer, NAS, and and...

  Hey dude,

  Please don t forget that Vista has been installed on your laptop and the additional tools of Toshiba and the utilities that control many additional features!
  There is a huge difference between Vista and early Microsoft operating systems.

  The Vista eat computer resources and many devices old don t work or cannot be installed because the 3rd device manufacturers don t provide Vista drivers!

  In my opinion an upgrade to 2 GB ram would increases the performance of laptop.
  All programs and utilities could be loaded more quickly

• How to activate the USB Port on Satellite Pro 440 cdt?

  Hello
  I have the old satellite pro 440 cdt and my problem is the USB Port.

  How can I activate the USB Port?

  Thank you

  Hello

  Without any explanation and comments?

• Satellite Pro 440 CDT - message "the disk you selected is not ready."

  I have an old Satellite Pro 440 CDT with a CD drive (no floppy more) who plays the music well, but when I type and want to save to a cd, he comes up with the message "the disk you selected is not ready. Can anyone help, because really, I'm not an irritable type and need help.

  I know it as an irrelivent bits to your problem, but I suggest that you invest in a USB key. They are pretty well the replacement disks are much more portable than a CD.

• Satellite Pro M200 - cannot start Windows

  I have a Satellite Pro M200 PSMC4A, did an update Windows, requsted to restart, then the black screen as follows:
  Windows could not start. A recent hardware or software change might be the cause. Equip the installtion disk and restart. Problem 1: having no disk - lost I think. Lost file is \Boot\BCD.

  Tried different legal remedies without success. Disk Windows XP used to reinstall but now says cannot see all hard drives!
  All of the suggestions.

  Hello

  You can access the advanced boot menu? If so, you should try to start in charge more than the last known good configuration.
  If this is not the only option is to reinstall Windows I think. Therefore, you can take a Microsoft or Toshiba drive. If you don t have the Toshiba disk recovery, contact the service provider authorized in your country.

  I think that the recognized HARD wasn t disc because you need SATA drivers. Did you check that?

• Satellite Pro NB10t-A-108 - Windows 8 PRO is equal to 8.1 Windows

  http://www.Toshiba.de/discontinued-p...o-nb10t-a-108/

  Satellite Pro NB10t-A-108. PU143E-00200FGR.
  In German:
  Windows 8 64-bit (one) auf Empfohlenes update Windows 8 Pro. Intel® Celeron®.

  What means "Windows 8 Pro" on the Internetside Thoshiba?
  Is equivalent to "Windows 8 Pro" "Windows 8.1"?

  Where can I find the update download 'Windows 8 Pro' or ' Windows 8.1 "?

  What means "Windows 8 Pro" on the Internetside Thoshiba?
  Is equivalent to "Windows 8 Pro" "Windows 8.1"?

  This laptop has been pre-installed with Windows 8
  You should know that Microsoft has released two versions of Windows 8: common Windows 8 and Windows 8 Pro.

  But this is not very important... The fact is that Win 8 was replaced by Win 8.1... so forget the thing Win 8 Pro...
  The update can be captured using the Microsoft App Store. Sound for free.

  In addition, Toshiba press information how to perform this update:
  http://www.Toshiba.EU/innovation/Gen...ws8_1-message/

• Satellite Pro C870 - 19(d): Windows 10 - BT seems to have problems

  Hello

  our laptop Satellite Pro C870 - 19(d) works very well under Windows 8.1. Now the tool Advisor Windows 10 registration and upgrade has been installed automatically by Windows Update and it says that the two internal Bluetooth components of this laptop is not compatible with Windows 10.
  Currently, no driver updates Bluetooth is available via Windows update driver online or via Toshiba Service Station.

  Is there a update driver in the near future that ensures compatibility with Windows 10?

  Best regards, Hans-Georg

  Hi guys, the Windows 10 is not officially released by MS, and currently Windows 10 drivers are not available for all Toshiba laptops.
  I think you need to wait that Toshiba would start the support to win 10. I guess that this will happen after the official release of win 10.

• Re: Satellite Pro C50 - cannot install Windows 8

  Hello.

  I have a Toshiba Satellite Pro with Windows 7 preinstalled c50.

  It comes with 2 DVDs containing Windows 8.
  I tried to upgrade to Windows 8 (following the instructions included in the Manual: BIOS change, etc.), but I can´t install it.

  After booting from the DVD, it doesn´t appear the installer of Windows 8, Windows 7 recovery options.

  Could you please help me?

  Thanks in advance,

  Sergio

  Hello

  I assume that you have followed the solution step by step, as described in these documents:

  [Guide to upgrade Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2A03EJ0001R01.htm]

  [Update Installation of Windows 8 | http://aps2.toshiba-tro.de/kb0/TSB2A03ER0000R01.htm]

  [Windows upgrade 8 - Notes and Restrictions: http://aps2.toshiba-tro.de/kb0/TSB2A03EL0000R02.htm]

• Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

  Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
  Close for any help.

  It's a scream! :_| : O

  This looks like a damage ROM module!
  How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

  I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

  I think the best way is to ask the Toshiba service partner in your country.
  I think they'll give you more details on the handling of the Fryer

• Satellite Pro 4320 - upgrade to Windows XP Home edition

  I have a 'standard' of Satellite Pro 4320 and plans the upgrade from Windows 2000 to XP - either domestic or professional. Y at - it advice on the problems or things to watch I'm likely to encounter?

  Hi Graham,

  Only problem you may have is that the Toshiba utilities were all designed for Windows 2000 and may not work properly with XP. Downloads available for your laptop have only an update of the BIOS for XP.

  Obviously XP contains device and utility drivers much more generic, so you may find that your system will work very well with the latter. Similarly, you can see that install the original Toshiba utility will work also. I have no definitive evidence either way.

  You can also find you would benefit to increase the RAM since XP uses rather than previous operating systems.

  HTH

• Satellite Pro A10 - no valid Windows XP installed

  Legitemately bought a Toshiba Satellite Pro A10 laptop, but there is not a valid Windows XP Professional installed. I have the original product key.

  Can I download this, free preference?

  Hello

  How have you noticed that an invalid Windows XP installed?

  Usually if you reinstall your laptop with Toshiba recovery disk it s a copy valid XP is already activated and there is nothing to do.

  In addition, the product key on the lower side of your laptop belongs to the preinstalled version of Windows XP and t can be used with the other XP discs.

• Satellite Pro P300-19 q - Windows 7 driver for x 86 ACPI system device

  I am trying to upgrade to Windows 7 Vista professional - he told me that to install Toshiba x 86 acpi - compliant value device for general and logical use - help!
  Where can I get it from? I searched for the last 3 hours - my laptop is the satellite Pro P300-19 q - I am a novice to this - thanks a lot in anticipation

  Hello

  You have already installed the drivers? All what you need you can download on the Toshiba site.

  In addition, you must install Toshiba Value added Package. It contains all the necessary tools Toshiba you need.