Update the network adapter card dual band in the HP ENVY 15 t touchsmart Editon of Quad.

Similar Questions

• Network of abandonment (intermittent and consistent) - Dell Inspiron 7347, Win 8.1, Linksys BEFW11S4, adapter Intel dual band wireless AC 7265

  History: I just bought a laptop / Tablet Dell Inspiron 7347 (exchanged for another unit, see below).   Problems to maintain a strong connection and when connected, it is very slow.   When it is connected to the wireless router, it maintains a (slow) connection for 3-5 minutes and then craps out (restrict the connection with the yellow "!" on the WiFi in the taskbar).  He then returned to the top of 1 3 minutes later.  It's a coherent continuous cycle.  I tried to reset the default router with no luck.

  All the other devices on this router (office, phone, IPad) all hold the connection without problem at the same time, this device is not.

  Notable: Before I bought this tablet/laptop I bought an Acer Aspire tablet / laptop which had exactly the same problem on my network.  I returned the unit for other reasons (quality of construction etc.), but he had the same OS (Win 8.1).  I don't know if she had the same network adapter.

  What I tried: cycling the router - cycling the modem - router the default factory reset of small animals - U-APSD deactivation on the network card - slapping me hard - offering to the gods...

  What I tried to try: tried to update the drivers for the Intel card using the Intel drivers update (adapter drivers for Win 8.1 and Intel PROset wireless), but he kept time during download because... THE NETWORK IS NOT STABLE! (ugh!)

  The installation program:

  Dell Inspiron 7347
  OS 8.1 win that perform all updates

  Network adapter: Intel dual band wireless AC 7265

  Router: Linksys BEFW11S4 Wireless-B to wide band
  Parameters:

  Host name:	(Required by some ISPs)
  Domain name:	(Required by some ISPs)
  Firmware version:	1.45.7, October 8, 2003
  LAN IP address:	(Address: 00-0C-41-C6-49-B1)
  	.  .  .  (IP address)
  	255.255.255.0 255.255.255.128 255.255.255.192 255.255.255.224 255.255.255.240 255.255.255.248 255.255.255.252 (subnet mask)
  Wireless:	(Address: 00-0C-41-C6-49-B1)
  	EnableDisable
  	SSID:
  	SSID broadcast: EnableDisable
  	Channel: 1 2 3 4 5 6 7 8 9 10 11 (field: us.)
  	WEP: MandatoryDisable
  Type of Internet connection:	(Address: 00-0C-41-C6-49-B2)
  	Obtain an IP automatically Static IP PPPoE (for users of SingTel) RAS PPTP Heart Beat Signal select the type of Internet connection that you want to use

  Router password:	(Enter the new password)
  	(Re-entry to confirm)
  UPnP services:	EnableDisable
  Restoration

  
  Default settings:YESNO

  Host name:
  Firmware version:	1.45.7, October 8, 2003
  Login:	Disable
  LAN:	(Address: 00-0C-41-C6-49-B1)
  	IP address: 192.168.1.1 Subnet mask: 255.255.255.0 DHCP server: Activated
  Internet:	(Address: 00-0C-41-C6-49-B2)
  	IP address: 67.249.54.246 Subnet mask: 255.255.224.0 Default gateway: 67.249.32.1 DNS: 209.18.47.61 209.18.47.62 0.0.0.0 Time remaining of the DHCP: 22:33:53

  DHCP server:	Turn off
  From the IP address:	192.168.1.
  Number of DHCP users:
  Client lease time:	minutes (0 means a day)
  DNS 1:

  
  .  .  . 2: .  .  . 3: .  .  . VICTORIES: .  .  .

  I'm puzzled.   Makes me CRAZY!

  FIXED!   Check it out guys.   I'm bothering with deactivation of all the resources of the card network, add-ins etc in the hope of this narrowing... including Bluetooth.   I have a Microsoft Bluetooth mouse for the comfort sculpt ([View:www.microsoft.com/.../sculpt-comfort-mouse:550:0])

  I turned off and BOOM... everything was fine.   Also, I noticed when it was powered up, the speedtest would plunge drastically when I actually moved the mouse during the test.   See below for the result of the test with the mouse.   I can't post a with the mouse on because the test wouldn't even with it on.

  

  Hmmmm... so it turns out that it could be a problem with a product from Ms... go figure.

• What happened to 5 GHz networks - Linksys WMP600N dual band PCI Wireless

  I have one Linksys WMP600N dual band PCI Wireless internet.

  Before my upgrade to Windows 8, it worked perfectly under Windows 7. Now, after the installation of Windows 8, 5 GHz network is no longer visible.

  There was a Windows Update for drivers after installing Windows 8, but that does not solve the problem. There is also no later published driver on the Web of the Linksys or Ralink Tech sites.

  I also tried to connect the SSID as if it were hidden, but that no longer works.

  I ran through all the normal troubleshooting steps (reboots, slowdown, etc.) and I tried to adjust the various parameters of the router as well (channel and mode).

  And I'm not the only one who has the problem, and it seems that it cannot just be this adapter wireless but also many other manufacturers.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_cp-networking/cant-find-5GHz-on-Linksys-WMP600N/97b2ad73-d22d-420B-9973-f283c19360c8

  I started down this path, but he told me that my drivers are up to date.

  However, I was able to restore the slightly modified functionality with these instructions:

  Step 1: Go to the adapter settings and work your way to the tab that says update driver

  Step 2: Choose the Option browse my computer for the location of the driver

  Step 3: Select "have disk Option.

  Step 4: Select "Let me pick from a list of drivers for devices on my computer."

  Step 5: Choose "Linksys WMP600N-Wireless-N PCI Adapter with Dual-Band (Microsoft).

  Step 6: Click Next

  The problem seems to be with the Ralink Tech driver. I installed via Windows Update after loading Windows 8, and that seems to be the problem.

• HP ENVY Phoenix Desktop - 810 -: replace wlan card 2 .4GHz with wlan card dual band or 5.0 ghz

  Hi everyone I would replace wlan card with wlan card dual band or 5.0 ghz 2 .4GHz, this computer came with this outdated map

  Wireless - HARRIER BGN 1 x 1 BT4 CB 752597-001

  I want to be able to watch online and buy wlan with double band or 5.0 ghz card which will run in my computer

  Thank you all very much for your time

  eppsberg wrote:

  Hi everyone I would replace wlan card with wlan card dual band or 5.0 ghz 2 .4GHz, this computer came with this outdated map

  Wireless - HARRIER BGN 1 x 1 BT4 CB 752597-001

  I want to be able to watch online and buy wlan with double band or 5.0 ghz card which will run in my computer

  Thank you all very much for your time

  Hello

  I think so. Because it is a desktop computer should not be restrictions on wireless cards. Get a map of 5 GHz, and move forward.

• Belkin adapter wireless dual-band 600n

  So, I recently bought a belkin dual-band adapter and I am trying to connect to the internet and it says unidentified network, no internet connection.

  I plugged my old 300n and it works perfectly fine even I tried to plug into together to see if it works fix the other and it just does not connect. You is someone who knows how to solve this problem.

  Hello Slayer,

  Thank you for reaching out to us to the Microsoft Community Forum.

  Normally, any wireless router must have a parameter for which you must go to the configuration menu by going to the web page (for example http://192.168.0.1) via a web browser.  Here, there should be settings for various things, including wireless.  Ensure that the wireless is turned on.

  Who is standing on IT, disable any kind of security as a first step, to make sure that you can at least get wireless to work.  If so, you can connect with your laptop Windows 7, then you should be well set up the wireless with a kind of security (i.e. WEP/WPA) so that when you connect again with the Windows 7 laptop, you need to put a password (only once).

  I also recommend that you download and install the latest drivers for the USB of N600 DB Wireless Dual-Band adapter.

  For more information about how to download and install the latest drivers from the manufacturer's Web site, please see the articles below.

  http://www.Belkin.com/us/support-article?articleNum=4924

  http://www.Belkin.com/us/support-product?PID=01t80000002vzcJAAQ

  Hope the helps of information provided. Let us know in case you need more help.

• HP Pavilion a6330f desktop PC: is it possible to update my Network Interface Card?

  Is it possible to replace and modernize the Network Interface Card that I have (10/100 Base-T Network Interface)?  If Yes, do you have a recommendation indicating what replacement card should I buy?  The network interface that I have now I cannot take advantage of very high speed that my internet provider (150mmps).  Thanks for your help with this... Mike

  You are welcome.  Thank you for the additional information.

  Here is a card that should work for you:

  http://www.Amazon.com/TP-link-TG-3468-1000Mbps-Gigabit-express/DP/B003CFATNI/ref=sr_1_1?ie=UTF8 & qid = 1420761130 & SR = 8-1 & Keywords = PCIe-x 1 + Network + Card

  Read the reviews to see what users say about it.  You should disable the network adapter before you install it.  There is a PCI slot and the PCI Express x 1 slot is faster.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• PCI card dual band for Satellite C660

  Can Hello, please someone suggest any card PCI dual-band for Satellite C660

  Thank you

  Is something wrong with WLAN card internal laptop satellite?

• When I change my nic to 1000 Mb, Full Duplex in the vSwitch/network settings on the NETWORK adapter card breaks down.

  I should be able to do so if the server has Gigabit NIC right?  Or am I just confused?  It seems to stay on 100 full, but it seems that things have been a bit slow on my virtual server, so I tried everything I can think of.

  Hello and welcome to the forums.

  I should be able to do so if the server has Gigabit NIC right?

  Yes.  What is the physical switch on?

  Good luck!

• Deleted Windows Vista Update wireless network adapter

  I had restore the computer to the old version after update.  Once the update has been made the computer could not see the wireless network card.  Any ideas?

  Go to the website of the manufacturer of your computer/network/computer adapter laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Pavilion dm4-1006tu: 5 GHz in Broadcom 802.11n network adapter support

  Hello

  Broadcom 802.11n network adapter has dual band support? (2.4 GHz and 5 GHz)

  Command prompt provides these details:

  C:\ >netsh wlan show drivers

  Name of the interface: Wi - Fi

  Driver: Broadcom 802.11n Network adapt
  Version: 6.30.223.256
  INF file: C:\Windows\INF\netbc64.inf
  
  C:\Windows\system32\DRIVERS\BCMWL63a.sys
  C:\Windows\system32\DRIVERS\vwifibus.sys
  Type: Wi - Fi Native Driver
  Radio types supported: 802.11n 802. 11 a 802.11 g, 802. 11 b

  Thank you

  @Annshul,

  Hello and thanks for the display on the HP support forums.  Here is a link to your laptops manuals.  All specifications can be found on this page.

  HP Pavilion dm4-1006tu Entertainment Notebook PC - manual

  You will find all the answers to your specifications of systems.

  Thanks again for posting and have a great day.

• TouchSmart 520-1070UK: if I can replace the 802.11n wireless card in my 1070UK 520 for a dual band

  I've been updated by my cable company to a router to speed broadband to 200 'up to '. My old iPad connects to new 5G

  band but the HP Touchsmart is the single band 802.11n equipped Ralink card.

  Can I physically replace or add anything to connect to 5G?

  Hi there @tiggerchris

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you are looking for help on how to replace your existing wireless network adapter or add something to support the 5 GHz band. I'm happy to help you with this.

  Service and maintenance guides available and put at level of guides for this system offer no wireless adapters. The simplest solution I can suggest would be an adapter USB dual band WLAN.  There are many benefits to this choice. It is easier to install, it's easy to transfer to another device if necessary, and they can be very economical.

  I'd say a bit of research online for this type of device, to see what is available.

  I hope this helps.

• Satellite P850 - 12 X - update Intel Dual Band Wireless-AC 7260

  Hello

  I'm writing this information for those who want to upgrade their wirelss adapter inside the Intel 7260AC card dual band.

  This card functions perfectly on my Satellite P850-12 X, but you will need to cover the pin 20 with a piece of tape so that it works correctly. I installed this card in my laptop, installed the drivers etc, everything went well past shown in dev Manager without problems, but them was always a red x across wireless networks connections and nothing would show. After spending several days trying to figure out what the problem was, I came across this information I share now. I will not go, why you need to cover the pin20 which would take a whole new thread.

  The intel 7260 dual band wireless card works with incredibly fast speeds and has a capacity of Widi and bluetooth and is well recommended but iff after the installation of the card that you have similar problems, as I had then you now have the soloution I saved days of reasearch. All donations most wecome :)

  http://www.InsanelyMac.com/forum/topic/279398-solved-where-is-pin-20-on-a-WiFi-card/

  Hi Sam

  Thanks for sharing your experience.
  I just want to add that these updates is not supported by Toshiba and these updates probably will void warranty valid. This should know any owner of the laptop and do these updates on his own risk.
  With other words each of us must know this and make own decision how to handle this situation.

  In any case, I m happy to know that everything went well with your upgrade. :)

  Good luck.

• M6-n010DX: Dual Band Wireless card for AMD based m6-n010DX

  Recently bought a router ASUS RT-N56U dual band.  Works very well and offers 2 powered by USB port for network implementation 'server' hard drives.  Problem is that my laptop has only a single band wireless card.  Checked the "Maintenance and Service Guide" for the m6-n010DX and the ' Intel Dual Band Wireless-AC 7260 802.11 2 × 2 WiFi + BT 4.0 ac adapter Combo "is listed (page 4).   Thought it strange that an Intel card scored for a portable base processor AMD, but I decided to give it a try.   IT DID NOT WORK!   Does anyone know a card dual band wireless that works?

  Thanks for your help,

  Here's what he said.

  Integrated wireless options integrated wireless LAN (WLAN) through two WLAN module wireless antennas to appear together Support for the following WLAN modules:

  ● Qualcomm Atheros AR9565 802.11b/g/n 1 × 1 WiFi + Bluetooth™ 4.0 Combo Adapter - 733476-001
  ● RT3290LE Ralink 802.11b/g/n WiFi and Bluetooth 4.0 Combo Adapter 1 × 1 - may be iNtel CPU but no P/N?

  Doesn't look like there is a dual-band for her Bard?

• HP envy 17-j130eb: is my HP envy 17-j130eb compatible with a intel dual band 7260 adapter?

  I'm about to buy a new wifi adapter to take advantage of the benefits of my router dual-band.

  I have bin looking online and I could not find known retailers in my area, which offered a card dual band N 7260 of intel, but many who offer the AC adapter version.

  So my question would be is compatible with the adapter, I would like to buy in my laptop?

  Because some Web sites have noted that their adapters do not work on lenovo, hp and other systems.

  Thank you!

  Hello

  Yes. Please use the part number on page 41 of the following book:

  http://h10032.www1.HP.com/CTG/manual/c04091762.PDF

  The manual also shows you how to replace.

  Kind regards.

• Need a dual band card WiFi AC for Probook 4530 s

  We have several laptops ProBook 4530 s (less then 2 years) in our society (product # A7K05UT #ABA) provided with stock simple strip cards and will not recognize the 5 ghz band.  I have a 5 yr old DV5 which has an Atheros card that recognizes them both and a DV7 new desire that I just put an Intel card in which works perfectly.

  When we put the Intel card in the Probooks - at startup, BIOS flashes instantly that it will not recognize the card with a 702 error.

  I can't believe that HP would be intentionally block the ability to update their products.  The ProBooks run the latest BIOS Upgrade and have no driver card dual band listed.

  Does anyone know a double card strip 2 x 2 with BlueTooth that works?  Or y at - it an easy way to unlock this paralyzed from the BIOS?

  If this upgrade problem cannot be resolved - looks like we get a different provider of portable computers.

  All THE news will be welcome.

  Thanks in advance.

  Hello:

  Yes, unfortunately, there is a BIOS "whitelist" on this model that locks the unsupported cards.

  HP seems to have put an end to this practice recently (maybe in the last year or so), as consumers have indicated being able to install any model wireless card they please.

  This helps any questions with the 4530 s.

  According to the maintenance manual, Chapter 3, the card only dual band with BT that works is the Intel Centrino® Advanced-N 6230 - HP 636672-001 part number.  This isn't an AC card.

  Due to the restrictive nature of the BIOS, you should also get this card with HP number thereon, or it won't work.

  I checked the HP part store for availability, and HP has more article for sale, so my recommendation would be to look on sites like eBay and query by part number and buy a card used, but tested and functional.

  Specifications on the Intel 6230...

  http://www.Intel.com/content/www/us/en/processors/Centrino/Centrino-advanced-n-6230-brief.html

  I have no idea how to hack BIOS to get any wireless card to work.