UPDATE the procedure

Similar Questions

• what I am doing wrong? update the procedure

  cannot understand it. get errors trying to compile. Perhaps an error of syntax with the single quotes / double for NEWSTATUS and 12345?

  create or replace

  PROCEDURE TEST_UPDATE

  as

  BEGIN

  SQLU: = "UPDATE TABLE1@DBLINK SET STATUS = 'NEWSTATUS' where the project of '12345' = '; "

  run immedate sqlu;

  commit;

  end;

  I get:

  PLS-00103

  ORA-00904

  ORA-00933

  PLS-00103

  708631 wrote:

  No, it did not work. Even if I do not run always immediate problems and may not compile.

  It should work, but it doesn't.

  create or replace PROCEDURE TEST_UPDATE

  is

  BEGIN

  UPDATE TABLE1@DBLINK SET STATUS = 'NEWSTATUS' where of the PROJECT = "12345";

  commit;

  end;

  That's because you wrap your values with 2 quotes try only with single quotes.

  for example

  Update table1@dblink set status is 'NEWSTATUS' where of the project = '12345'.;

• Update the BIOS has no - no display on my Satellite A200

  Hello

  When I tried to do an update of the windows BIOS, windows stuck and need to restart, but when I restart I no the any all screen.
  I guess that my BIOS is damaged.

  I would try an update of the traditional BIOS, but there is no traditional update of Satellite A200.

  Any ideas?

  Thank you

  Orhan

  Hello

  Unfortunately, it seems that the windows version of the BIOS is available for this model of laptop.

  In any case, I wonder why you have updated the BIOS of your laptop. Many users of the forum mentioned that the update of the BIOS is risky!
  The bad BIOS or bad BIOS update procedure can damage the motherboard specifications ROM!

  Did you follow the directions of update of the BIOS that is available on the Toshiba page?
  Generally everyone should plant after that law updated the procedure

  You said stuck and need to restart windows
  Well I think that something was wrong during the update process and so the phone doesn't display anything!

  This doesn't sound good! In my opinion, you must contact the ASP in your country because after the wrong BIOS only laptop technician could save the unit!

  Good luck

• I moved a file to one internal drive to another on a MacPro mid 2012. Whenever I open a moved file, I have to update the links manually. Is there a procedure to do it automatically?

  I moved a file to one internal drive to another on a MacPro mid 2012. Whenever I open a moved file, I have to update the links manually. Is there a procedure to do it automatically?

  How to create the links?

  Are we talking ln links?  Use flexible links.  the default value is difficult.

  R

• Can someone tell me the exact procedure updated the BIOS on an Aspire V5 - 122P.

  Can someone tell me the exact procedure updated the BIOS on an Aspire V5 - 122P. I upgraded from Windows 8.1 for Windows 10. I read somewhere that the upgrade of BIOS ver 2.10 and 2.12 will improve the speed at which it runs. It seems that here are slow running problems with this machine.

  I also know enough to know that an executed incorrecly BIOS update can cause a wipe on then, please, if you have done this correctly, please share your experience.

  I downloaded the file and the readme says: Windows flash: Please click on "SOBI0210.exe" for updating the bios.

  I didn't get this in case it defines something moving that I don't understand.

  [subject line changed to reflect the new topic]

  Hello

  There is nothing special for the update of the BIOS.

  Just download the BIOS, make sure that your laptop is plugged in (and also that he above 60% battery in any case), and run the file that you downloaded.

  BIOS

  Acer

  BIOS

  2.12

  3.2 MB

  24/07/2014

  Download

• Upgrades - during the procedure, my PC says it is install updates - but after doing what he wonyt restart and I need to go to restart from the last successful to get windows to restart - ideas?

  Upgrades - during the procedure, my PC says it is install updates - but after having done this, she does not restart and I need to go to restart from the last successful to get windows to restart - ideas?

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with update of a column by using the procedure of database and refreshing or put in value programmatically

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  I have a page that consists of two taskflows.

  First workflow has a fragment which is to have a table based on view object salespersons (not editable)

  Second task flow contains a form of ADF from the same view object Salespersons.

  As the user selecting a line in the table of the same record is displayed as no problem.

  Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.

  I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:

  Now, here's the code of the Java bean for activation:

  Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized

  and Activate and Deactivate buttons are not disabled and active properly.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  Links BindingContainer = getBindings();

  OperationBinding operationBinding;

  operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);

  operationBinding.getParamsMap () .put ("pId", vId.getValue ());

  operationBinding.getParamsMap () .put ("pStatus", "A");

  Object result = operationBinding.execute ();

  dcStatus.setValue ("A");

  } else {}

  return;

  }

  }

  Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  -no doubt this two lines are not needed here

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  dcStatus.setValue ("A");

  BindingContainer links = getBindings();

  OperationBinding operationBinding;

  the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);

  Object result = operationBinding.execute ();

  } else {}

  return;

  }

  }

  Here's the code from the Fragment of shape for used buttons.

  "< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"

  < af:showPopupBehavior popupId = "pActivate" / >

  < / af:button >

  "< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"

  < af:showPopupBehavior popupId = "pDeactivate" / >

  < / af:button >

  Here's matching Popups for each of the buttons Activate and Deactivate.

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >

  < af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >

  < / af:dialog >

  < / af:popup >

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >

  < af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >

  < / af:dialog >

  < / af:popup >

  Thanks in advance.

  Best regards

  Arif Khadas

  If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.

  To change the value of the GET value of the component of the link layer and change it.

  In this way the changes are captured by the framework and you should see them.

  Timo

• Update the State of the work using APEX_PLSQL_JOB. UPDATE_JOB_STATUS in the procedure

  Hello
  
  I have trouble getting my head around the status of the work in APEX_PLSQL_JOB.
  
  I have a button on a page that presents a work using:
  

            l_sql := 'BEGIN validation_pkg.run_validations_job(NULL,:P7_APP_ID); END;';  
            l_job := APEX_PLSQL_JOB.SUBMIT_PROCESS(p_sql => l_sql,p_status => 'Validation Submitted');

  This creates a job runs my packaged procedure and returns the JOB_ID argument which I store in a table, so I can query its status thereafter.
  
  The job runs then but I want to update the status of the job as it progresses through the stages of the treatment, it runs. So, I want to call APEX_PLSQL_JOB. UPDATE_JOB_STATUS. This call requires two parameters, the JOB_ID argument and the new STATUS. The manual contains the code example:
  

  APEX_PLSQL_JOB.UPDATE_JOB_STATUS( P_JOB => :APP_JOB, P_STATUS => 'New Status');

  and says: APP_JOB is a "reserved" component that will automatically "replaced for you at runtime with the number of actual jobs.
  
  However, when I want to talk: APP_JOB in my code 'create a package body... '. ', as

  apex_plsql_job.update_job_status (P_JOB =>:APP_JOB, P_STATUS => 'Stage 1 Complete'); 

  It returns a "bad bind variable. compilation error 'APP_JOB'
  
  How can I make to APP_JOB in my procedure packed?
  
  Thank you very much
  Martin

  Hello

  You must add the p_app_job parameter for example to your validation_pkg.run_validations_job procedure.
  Then present you the work as

  l_sql := 'BEGIN validation_pkg.run_validations_job(NULL, :P7_APP_ID, :APP_JOB); END;';
  l_job := APEX_PLSQL_JOB.SUBMIT_PROCESS(p_sql => l_sql, p_status => 'Validation Submitted');
  

  In the procedure, then use you value of parameter in APEX_PLSQL_JOB. UPDATE_JOB_STATUS call

  APEX_PLSQL_JOB.UPDATE_JOB_STATUS( P_JOB => p_app_job, P_STATUS => 'New Status');
  

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Change in the merger of insert and create a procedure for updating the records after

  Hello
  
  I have a table that contains about 50 M lines of partition, and every day I have an application that performs a merge to insert records statement about 100 k per day and it's 300 M updates a day.
  
  Because I both update and insert the application performs a merge.
  I need to make at least 500 M, updated day by day, and for this reason this solution doesn't have enough performance for what I'm asking.
  
  I think another solution that I will try to implement now, and I just posted this in an attempt to get help on the option that I may have to do.
  
  I want to start putting in place:
  -Locations is updated 'last_record_date' using 'KEY1' and 'Key2' "KEY3";
  -Change the application to only inserts into a temporary table.
  -Have two procedures, one that takes the new records from the temporary table and inserts it into the final table, and another that selects records which is updated and perform an update.
  -This two procedures will choose the records and delete them from the temporary table (or mark them as updated\inserted).
  
  The volume is very large, so performance is a challenge! That's why I'm writing this, because a solution with enough performance for the intermediate stage will be difficult.
  My final table is partitioned by date and the date is the area that I need to update (instead of create daily partitions in order to reduce the frequency of the movement of the line, I create monthly partitions)!
  It is currently my table definition:

  CREATE TABLE MY_TEST_TABLE
      (KEY1                           VARCHAR2(50 BYTE) ,
      KEY2                         VARCHAR2(50 BYTE) NOT NULL,
      KEY3                           VARCHAR2(50 BYTE) ,
      last_record_date                    VARCHAR2(50 BYTE) NOT NULL)
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
     STORAGE   (
      BUFFER_POOL DEFAULT
    )
    NOCACHE
    MONITORING
    ENABLE ROW MOVEMENT
    PARTITION BY RANGE (last_record_date)
    (
    PARTITION MY_TEST_TABLE_201112 VALUES LESS THAN ('20120101')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION MY_TEST_TABLE_201201 VALUES LESS THAN ('20120201')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION MY_TEST_TABLE_201202 VALUES LESS THAN ('20120301')
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING,
    PARTITION def VALUES LESS THAN (MAXVALUE)
    PCTFREE     10
    INITRANS    1
    MAXTRANS    255
    NOLOGGING
    )
    NOPARALLEL
  /
  
  
  
  -- Constraints for MY_TEST_TABLE
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY1" IS NOT NULL)
  /
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY2" IS NOT NULL)
  /
  
  ALTER TABLE MY_TEST_TABLE
  ADD CHECK ("KEY3" IS NOT NULL)
  /
  ALTER TABLE MY_TEST_TABLE
  ADD CONSTRAINT pk_MY_TEST_TABLE PRIMARY KEY (KEY1, KEY2, KEY3)
  USING INDEX
    PCTFREE     10
    INITRANS    2
    MAXTRANS    255
  /

  Thank you
  Ricardo Tomas

  naoseionome wrote:
  Hello

  My version is:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  It's the DOF I used to create the database.

  The merger is common during every day for about 10 M records.

  There are several methods to do the update, but they do sequencially to avoid deadlocks (because I can't control the source and each process can update the same keys.

  The update uses "KEY1, KEY2, KEY3" to update the value 'LAST_RECORD_DATE' have impact by being date or varchar2?

  I'm still waiting to receive permissions in order to follow up the matter, but in the meantime, in that I am trying to implement this work around in order to accelerate a development in the case where it would be necessary! Comments only I have at the moment, it is that he is not able to process the total amount of records timely (order book is generated).

  Thank you
  Ricardo

  Well, the first thing we do is to change the type of data type varchar to a date. The main impact is that a date is not a string, it's a date. If you are adding data processes in different date formats (which is possible when you use a character to store information) you're going to be very sad (good luck converting back an effective date).

  An example of how this can happen easily.

  ME_TUBBZ?select to_char(sysdate) from dual;
  
  TO_CHAR(SYSDATE)
  -----------------------------
  12-jan-2012 10 55:33
  
  1 row selected.
  
  Elapsed: 00:00:00.01
  ME_TUBBZ?alter session set nls_date_format = 'yyyy-mon-dd';
  
  Session altered.
  
  Elapsed: 00:00:00.01
  ME_TUBBZ?select to_char(sysdate) from dual;
  
  TO_CHAR(SYSDATE)
  --------------------
  2012-jan-12
  
  1 row selected.
  
  Elapsed: 00:00:00.00
  

  Assuming that the client passes the column as an Oracle DATE will make an (implicit) conversion to store the data as a string, which will be based on the current settings of the NLS for the session. This allows also for someone to completely non-jour the information in the column (super bad). It's just really bad form to use strings to store dates, numbers, anything that is not naturally a string.

  Based on the description of your problem, I can't imagine how your partitioning scheme performs one action in another that require more work in order to process the updates (which are most of your needs). Partitioning does not equate to increase performance. It is a tool that, like every tool has its place, but I do not think that this is justified for what you do (certainly not how you currently use it anyway).

  I say no partitioning can not be useful for you, but I don't think that on the column that you are currently using is 'good '.

  Something I would like to personally study (must be able to compare this approach to your course, if you need parameters for comparison) if I were you would be using a Table Index organized for it. It will take more time to perform the operations insertion, but that is a small part of all the work that you do for this process. For updates, it should eliminate a lot of IO, assuming that you are doing an INDEX seek followed by a table access by ROWID to perform updates. This recommendation assumes that everything you said is true. You have 4 columns in your table, of which 3 are components of the primary key and the 4th is a date (note I did not string :)) and that you refresh mainly, not fit.) Also that you have no 'secondary' on this entity index (and none are needed).

  I would investigate this approach before the solution of temporary table that you are currently studying.

  See you soon,.

• updates in the procedure

  Hi all
  
  My question is I have some questions as 7.8 some are updated and some are delete, it takes b run everyday.
  can I put in a procedure and then schedule the procedure.
  
  If Yes please tell how can I use run immediately or what, because some r updates with void queries as well
  
  waiting for answer
  Yahya

  Yahya says:
  Hi all

  My question is I have some questions as 7.8 some are updated and some are delete, it takes b run everyday.
  can I put in a procedure and then schedule the procedure.

  If Yes please tell how can I use run immediately or what, because some r updates with void queries as well

  waiting for answer
  Yahya

  some queries as 7.8 do you mean?

  You do not have to use run immediately in a procedure, unless you want to use the DDL command. Just put all the DMl in a procedure n schedule it. Planning to use the DBMS Scheduler. You can program directly a plsql so block

  Published by: LoganDBA on October 10, 2011 12:33

• Problems with the procedure at the level of the stcok update

  Hi, I am new to Oracle and I have problems with this procedure.
  I had two tables, orders and inventories, and I want to update inventory quantities, when I received the order. For some reason, NULL keeps popping out. Someone help me pls with this!
  The tables are
  
  create table orders
  (order_no number (4) orders_nn_11 the NOT NULL constraint,)
  item_no number 4 orders_nn_3 of the NOT NULL constraint,
  order_qta number constraint orders_nn_4 NOT NULL,
  ORDER_DATE date NOT NULL constraint orders_nn_2,
  (date of receipt);
  and
  create the table stock
  item_no (4).
  Number of CQI,
  constraint stock_pk foreign key (item_no) references products (item_no);
  
  the procedure is here, but as I said I am new to this, so I really don't know.
  
  
  create or replace
  procedure recues1 (aorder_no in number, aitem_no in numbers, date received)
  is
  quantity number;
  number of quantity2;
  cursor a1 is select qta in stock where item_no = aitem_no;
  cursor a2 is order_qta selection of orders where order_no = aorder_no and item_no = aitem_no;
  Start
  Open a1;
  extract the a1 in quantity2;
  Open a2;
  Fetch a2 in quantity;
  stock update
  Define qta = quantity2 + quantity
  where item_no = aitem_no;
  Update orders
  received game = sysdate
  where order_no = aorder_no;
  near a1;
  Close a2;
  end;
  /
  
  Thanks in advance

  Hello
  Perhaps because ther eis no COMMIT.
  Or have I missed?

  Something like that

  .....
  
  close a1;
  close a2;
  commit;
  end;
  /
  

  Kind regards
  Bobin

• call sub procedure for updating the table - need help

  Hi all
  
  I have a scneario wherein I get three values 0,2.5 and 57.
  For each value, I'll call another procedure that updates a table "sample_dest".
  The "sample_dest" table has a column "dest_nbr."
  
  Now, for each three values I get,
  I want to update only one record in the table 'sample_dest '.
  
  for example, I want to update the column "dest_nbr" with a value of 59.5 (0 + 2.5 + 57).
  
  I am unable to do this, because every time the procedure is called,
  the previous values are not stored. 57 is the last value I get,
  I am able to store only 57. But I want 59.5 to be updated in the table.
  
  How can I achieve this.
  Help, please.
  
  Concerning
  Rambeau.

  This should be done in a single sql statement, not in a loop of cursor (which is what it looks like you're doing). If sample_desc already contains records for samples, so it should look like:

  UPDATE sample_desc sdesc
  SET desc = (SELECT AVG(code) FROM sample_dest sdest
              WHERE sdesc.sample = sdest.sample)
  WHERE EXISTS (SELECT 1 FROM sample_dest sdest
                WHERE sdesc.sample = sdest.sample)
  

  If sample_desc does not already contain records (unknown from your description), then it would be an insert as:

  INSERT INTO sample_desc
  SELECT sample, AVG(code)
  FROM sample_dest sdest
  GROUP BY sample
  

  John

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Can't get the procedure to update - PLS - 00306:Wrong number or types of arguments

  I'm in a situation where I think that despite the correct number of parameters by the way my local procedure (which has been "forward declarations" in addition to logical writing for her; I use all this in a package) fails to compile in SQL * faster due to the error PLS - 00306:Wrong number or types of arguments in the call to P_SENDMAIL.

  
  

  I'm passing 5 parameters in the area of forward declarations and also in the logic/header inside in addition to calling the procedure in the package. Can one of you help mewith this and tell me where exactly the error might be. Here is the code:

  
  

  [code]

  -Local variable

  CRLF VARCHAR2 (2) CONSTANT: = CHR (13) | CHR (10);

  -- --------------------------------------------------------------------------------

  -FORWARD DECLARATIONS

  -- -----------------------------------------------------------------------------

  PROCEDURE p_sendmail (p_sender_email IN VARCHAR2,

  P_FROM IN VARCHAR2,

  p_to IN VARCHAR2,

  msg_subject IN VARCHAR2 DEFAULT NULL,

  p_msg_body IN LONG DEFAULT NULL);

  [/ code]

  
  

  The procedure itself:

  
  

  [code]

  
  

  PROCEDURE p_sendmail (p_sender_email IN VARCHAR2,

  P_FROM IN VARCHAR2,

  p_to IN VARCHAR2,

  msg_subject IN VARCHAR2 DEFAULT NULL,

  p_msg_body IN LONG DEFAULT NULL) is

  LONG v_to_list;

  LONG v_cc_list;

  LONG v_bcc_list;

  T_DATE VARCHAR2 (255) DEFAULT TO_CHAR(SYSDATE, 'DD MON YYYY HH24:MI:SS PM');

  g_mail_conn UTL_SMTP. CONNECTION;

  SMTP_HOST CONSTANT VARCHAR2 (256): ='smtp - abc.defg.ca';

  SMTP_PORT CONSTANT PLS_INTEGER: = 25;

  BEGIN

  g_mail_conn: = UTL_SMTP. OPEN_CONNECTION (SMTP_HOST, SMTP_PORT);

  UTL_SMTP. HELO (g_mail_conn, SMTP_HOST);

  UTL_SMTP.mail (g_mail_conn, p_sender_email);

  UTL_SMTP. RCPT (g_mail_conn, p_to);

  UTL_SMTP.open_data (g_mail_conn);

  UTL_SMTP.write_data (g_mail_conn, "|) CRLF);

  UTL_SMTP.write_data (g_mail_conn, p_msg_body);

  UTL_SMTP.close_data (g_mail_conn);

  UTL_SMTP. Quit (g_mail_conn);

  EXCEPTION

  WHEN utl_smtp.transient_error THEN

  Dbms_output.put_line ('TransientError: invalid operation in the service may not be available.) ") ;

  WHEN utl_smtp.permanent_error THEN

  Dbms_output.put_line (' permanent error: the entered email is invalid or recepients mailbox is full.) ») ;

  WHILE others THEN

  Dbms_output.put_line ('Unable to send an email' |') '|| SQLERRM);

  END p_sendmail;

  [/ code]

  Now by calling the procedure to send an email:

  [code]

  p_sendmail (p_sender_email = > ' [email protected]'-, send an E-mail to the donor )

  p_from = > ' ADS < [email protected] > ',

  p_to = > v_store_email_address,

  p_msg_subject = > 'anonymous user ',.

  p_msg_body = > 'thank you ' |

  CRLF.

  "Email confirms that we have received your promise |

  CRLF.

  CRLF.

  ' Name: '. v_full_name |

  CRLF.

  ' Temporary ID: ' | v_azbwccp_id |

  CRLF.

  "Reference number: ' |" MTID |

  CRLF.

  "Amount: ' | '. TO_NUMBER (campaign_desg_amt1) |

  CRLF.

  "Campaign: ' | '. campaign |

  CRLF.

  ' Description: ' | '. adbdesg_rec.adbdesg_name |

  CRLF.

  ' Type: ' | atvpldg_rec.atvpldg_desc |

  CRLF.

  ' Duration: ' | '. atvpdur_rec.atvpdur_desc |

  CRLF.

  "Frequency: ' | '. atvfreq_rec.atvfreq_desc |

  CRLF.

  "Start date: ' | '. bill_date2 |

  CRLF.

  CRLF.

  'Your commitment is processed.' |

  CRLF.

  "At the same time, if you want to change this transaction, please contact us.

  CRLF.

  CRLF.

  "Thank you for your support." |

  CRLF.

  CRLF.

  CRLF.

  CRLF.

  ' * This is an automated message system. Please, do not respond to this email. *** ') ;

  [/ code]

  
  

  I've also attached a screenshot of the error message below:

  

  Please help me if you can. I just can't understand the question.

  
  

  Thanks in advance

  Sandeep
  

  In the header of the procedure, I spent my parameter as msg_subject and during the call, he was p_msg_subject. The minute that I corrected the error, I was able to correctly compile the whole package body.

  The question can be now closed.

• Why is able to save and update the passwords for sites other than those of Blackboard FF?

  I am able to save and update passwords on other sites, but not on the Blackboard learn for my University. They force us to change our pw is from time to time, and I think I noticed it after that Blackboard did some updates to their site. It will always load autofill with my old account and password, but not update it. I deleted the password stored and tried to get FF to remember once again on my laptop, but it has not yet asked to save him. I'm guessing that there is a new code or a script for the journal in the procedure? Is there a manual way to enter and update the credentials stored?

  Hello, sites can specify that passwords should not be stored (however I do know that if this is the case on the page you are having problems with, since you did not specify which University it affects). as a way to get around this, you can use an addon like this: https://addons.mozilla.org/firefox/addon/remember-passwords