Update the SSL certificate on a security server?

Similar Questions

• How to install the ssl certificate in windows server 2008?

  Hello

  Can someone give me the steps to install the SSL certificate on my application hosted on windows server 2008 R2?

  Hello

  Although technet.microsoft.com should be the best forum for the problems of server below is a guide on how to install an SSL certificate.

  It will be useful.

  To install your newly acquired in IIS 7 SSL certificate, first copy the file somewhere on the server and then follow these instructions:

  1. Click on the start menu, go to administrativetools and click on Manager of Services Internet (IIS).
  2. Click the server name in the links on the left column. Double-click server certificates.

     

  3. In the Actions column to the right, click Complète Certificate Request...

     

  4. Click on the button with the three points, and then select the server certificate that you received from the certificate authority. If the certificate does not have a .cer file extension, select this option to display all types. Enter a friendly name that you can keep track of certificate on this server. Click OK.

     

  5. If successful, you will see your newly installed in the list certificate. If you receive an error indicating that the request or the private key is not found, make sure that you use the correct certificate and you install it on the same server that you generated the CSR on. If you are sure these two things, you just create a new certificate and reissue or replace the certificate. If you have problems with this, contact your certification authority.

     

  Bind the certificate to a Web site

  1. In the column of links on the left, expand the sites folder, and click the Web site that you want to bind the certificate to click links... in the right column.

     

  2. Click the Add... button.

     

  3. Change the Type to https , and then select the SSL certificate that you just installed. Click OK.

     

  4. You will now see the listed link for port 443. Click close.

     

  Install all the intermediate certificates

  Most of the SSL providers issue certificates of server out of an intermediate certificate so you will need to install the intermediate certificate on the server as well or your visitors will receive a certificate error not approved. You can install each intermediate certificate (sometimes there are more than one) by following these instructions:

  1. Download the intermediate certificate in a folder on the server.
  2. Double-click the certificate to open the certificate information.
  3. At the bottom of the general tab, click the install Certificate button to start the Certificate Import Wizard. Click Next.

     

  4. Select place all certificates in the following store , and then click Browse.

     

  5. Select the Show physical stores checkbox, then expand the Intermediate certificate authorities folder, select the below folder on the Local computer . Click OK. Click Next, and then click Finish to complete the installation of the intermediate certificate.

     

  You may need to restart IIS so that it starts the new certificate to give. You can verify that the certificate is installed correctly by visiting the site in your web browser using https rather than http.

  Links

  • Move or copy an SSL certificate on a Windows Server to another Windows Server
  • How to disable SSL 2.0 in IIS 7
  • How to configure the SSL in IIS 7.0
  • Video tutorials to install an SSL certificate in IIS 7 to NetoMeter

  Kind regards

  Joel

• Replacement of the SSL certificate in vCenter Server Heartbeat with a new certificate

  Realized the SSL certificates on my vsphere vCenter Server 5.5 environment change, but now I'm looking to deploy vmware vCenter Server HeartBeat service, but I have the following doubts.

  1. it is necessary to perform the exchange of currently used SSL certificate in my environment. ()http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2013041( )

  KB article talking about amendment of the certificate of a vCenter Server Heartbeat deployed... If the vCSHB are not deployed and yet, you don't need to worry... just go ahead with the installation and the new vCenter server certificate will be recognized by vCSHB.

• Setting the SSL certificate for the web user interface

  How can I configure the SSL certificate for the management of a SG300 interface? I don't seem to find the configuration option in the web gui?

  Hello Dirk,.

  For import / create / modify h99350 ssl please go to ' ' security > SSL server > SSL server authentication settings.

  HTTPS is enabled by default.

  Thank you and best regards,

  Siva

• How can I set up email when the field on the SSL certificate does not match?

  I am a customer of Dreamhost and don't know if our situation is unique or not, but both smtp and imap are "mail.example.com" even if the SSL certificate belongs to ' *. DreamHost.com'.

  I was not able to set up the email on my flame app because I get the following error:

  > Could not establish a connection with "mail.example.com". There may be a problem with your network or server.

  I think the problem is the lag of domain name, but I can't find a way to accept the certificate.

  Hello!

  According to the official DreamHost wiki site , you can try this (cut-and-pasted from the page). If it doesn't work, there are still other options available on the page.

  To connect to the mail server using the name of the server dreamhost.com instead of messagerie.votre_domaine.fr.

  Use the following steps to determine the name of the server to use:

     In the DreamHost Control Panel
     Click "Account Status" in the upper right hand corner
     Look for the "Your Email Culster:" at the bottom of the list.
     Find your cluster in the table below.
     Use the server name for the incoming server in your mail program.
  

  Name of Server Cluster e-mail
  homiemail-sub3 sub3.mail.dreamhost.com
  homiemail-sub4 sub4.mail.dreamhost.com
  homiemail-sub5 sub5.mail.dreamhost.com
  homiemail-master homie.mail.dreamhost.com

• Cannot save vSphere Web Client after the replacement of the SSL certificate

  Hi all

  I have followed the Articles of Derek Seaman on the replacement of all the certificates in vSphere 5.1 and have since turned to the VMware KB Articles. I replaced the certificates for the SSO, the inventory Service and vCenter Server with no problems (other than having to use OpenSSL-Win64 for vCenter certificate that I could not get the x 86 version certificate of work, makes no sense, but I'll take the small victory).

  If you follow the guide of vmware to replace the web service certificate, http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2035010, I get to step 12, enter the VMware vSphere Client Web back to vCenter Single Sign On and the following error:

  ##########################

  D:\Program Files\VMware\Infrastructure\vSphereWebClient\SsoRegTool > regTool.cmd registerService - cert "C:\ProgramData\VMware\vSphere Web Client\ssl" - ls - url ( https://(Server URL): 7444/lookupservice/sdk - username admin@system-domain - password (password) - dir 'D:\Program Files\VMware\Infrastructure\vSphereWebClient\SsoRegTool\sso_conf' - ip "*." ' * ' - serviceId-file 'D:\Program Files\VMware\Infrastructure\vSphereWebClient\serviceId'

  No file properties not found
  Initialization of provider of record...
  SSL certificates for https://vsphere.au.ray.com:7444/lookupservice/sdk
  SSL certificates for https://vsphere.au.ray.com:7444 / sso-adminserver/sdk
  Unhandled exception trying to escape: null
  Return code is: OperationFailed
  100

  ##########################

  VMware technical support suggested I uninstall all components, delete all databases and try again. I have done this and have exactly the same result.

  Has anyone seen elsewhere or managed to solve?

  Chris

  So, I managed to solve this problem. Not sure that this applies to everyone, but my problem was caused by registering using among other names of the subject in the SSL certificate for the SSO rather than the common name of the certificate.

  For example, the server name is server1.company.com. It is the common name of the certificate. But one of SAN of the certificate has been "vSphere.company.com".  If I used this other name in one of the component records that they would fail. I found that I have to use the common name. Even if the alternative names of job access to via your browser web, there is no certificate warning, if the registration of components using these names, it would fail.

  It seems crazy that you can use any of the San... then why allow us to make?

  Initially, I tried to replace the authentication certificate ONLY when the town was called vsphere.company.com, rather than the hostname of the server, and which is installed. However, try to install the Web Client would fail. When you come to the step where you have to accept the certificate of SSO, the installation fails because the common name of the certificate does not have the host name of the SSO server. It seems insane to me... why the host name of the server running the SSO should still come in when all calls are over HTTPS is simply absurd!

  I confirmed this with VMware Technical Support and they checked my conclusions.

• Unable to connect to the VMware Research Service - the SSL certificate verification failed

  Hello world

  to implement the new vCSA 5.1 but I get an error when you try to connect via browser Web Client.

  "Impossible to connect to the VMware Research Service . https://xxx.xxx.xxx.xxx:7444/lookupservice/sdk - The SSL certificate check failed. »

  I've found this KB

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & externalId = 2033338 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 423540040 & StateID = 1% 200% 20423538503

  The manual/work around seems to be a lot of work for me and perhaps this will cause other problems in the service due to problems of certification :/

  I also think that this cannot be the solution for a whole new vCSAppliance...-_-

  I am also able to go to https://xxx.xxx.xxx.xxx:9443 / admin-app

  is it correct for the device?

  You need to regenerate the certificate for Server Appliance after change of IP/hostname.

  Visit this link: http://www.virtual-blog.com/2012/09/failed-to-connect-to-vmware-lookup-service/

  Also, the admin/management interface is https://: 5480

  Lack of credentials [root/vmware]

  HTH

• For the SSL certificate expiration date

  Hello

  We use Adobe LiveCycle Installation of JBoss, and the SSL certificate that we use to enable rights management has expired.

  We have created a new which now works fine, but we would like to know if there is a way to control or extend the expiration date of the certificate, such as 3 months is a very short time.

  Kind regards

  Marwa

  The server SSL certificate is used for active between Acrobat and LiveCycle Rights Management Server to encrypt HTTP traffic.  It 'does NOT' management of rights in itself.  In other words, even if at the end of the ceriticate SSL, Adobe LiveCycle Rights Management will continue to work.

  You do not control the expiration date of the certificate.  The -validity argument allows you to control, in terms of days.  3650 will set the expiry of 10 years from the date of creation.

  More details here:

  http://blogs.Adobe.com/LiveCycle/2007/10/configuring_jboss_403_sp1_for_1.html

• The SSO authentication: the SSL certificate is unknown

  Hello

  I'm trying to configure orchestrator solution to use SSO for authentication. Although the vCenter certificate is installed and displayed in the trust to SSL Manager, I get the following error:

  The SSL certificate is unknown. You can fix this in the SSL Certificate tab.

  Tried to reinstall the certificate, restart the device - without success. Username and password are correct.

  I use Version of the device: 5.5.0.0 build 1282845, vCenter 5.5.0, 1476327.

  How can I solve this problem?

  By "vCenter certificate is installed," do you mean Certificate SSL VC (imported from https://[vc-ip]:443)?

  For SSO authentication, you must also import the UNIQUE https://[sso-ip]:7444 authentication certificate

• Help generate the SSL certificate for the Security Server

  Hi people,

  We have server (ss - 01.mydomain.local) security and connection server (cs - 01.mydomain.local). Now intend to install a certificate on the Security server. What should be the common name.

  our Web site is something like access.mydomain.local.

  Also, we plan to install SSL only on security for internet access server, this will affect the internal users, access to the connection to the server.

  Thanks and greetings

  J P Raj

  Take a look at the link below

  https://pubs.VMware.com/horizon-view-60/topic/com.VMware.ICbase/PDF/horizon-view-60-scenarios-SSL-certificates.PDF

  Internal users will not be affected when you install the Security server certificates

  Simply create a CSr file > get certificates and import them to the Security server in the MMC guide explains practically everything. If you already have certificates wildcard certificates, then you can follow the sub process

  (a) export the server certificates

  (1) to connect to the server that has certificates

  (2) for this server to export it to a PFX format certificate.

  (3) open the Microsoft MMC Certificates snap-in for the computer account.

  4) navigate to certificates (Local computer) > personal > certificates.

  (5) right-click on the signed certificate that is to be exported.

  6) click all tasks > export.

  (7) on the Welcome screen, click Next.

  8) click Yes, export the private key.

  (9) if it is an option, click on include all certificates in the certification path.

  (10) enter a password for the private key. This is required for the import certificates.

  (11) to enter a file name and location. For example, C:\certificates\certificate.pfx.

  12) click Next.

  13) click Finish.

  b) import it to the use of broker or planned connection securityr.

  Certificates of thye 1) import (preferable Pfx format) for the server broker or planned connection security.

  (2) open the Microsoft MMC Certificates snap-in for the computer account.

  3) navigate to certificates (Local computer) > personal > certificates.

  (4) right-click the certificates.

  5) click on Import.

  (6) through the pfx and click Next.

  (7) enter the certificate password.

  (8) select Mark keys as being exportable.

  9) click Next.

  10) click Finish.

  (c) restart Consulting Services

  To restart the services:

  Log in as an administrator on the server that is running the Server VMware View connection server VMware View connection or VMware View Server Security.

  Click Start > run, type services.msc and press ENTER.

  In the list of services, right-click on the VMware View connection Server or VMware View Server Security service.

  Click on restart and wait for service to stop and start.

• Replace the SSL certificate in VMware appliance identity

  Hello

  I followed the steps to replace the device of identity, a certificate signed by a CA (latest version 2.2.1.0)

  Everything went well and I have included the private key and the certificate chain complete with the device of the expected identity.

  However when I close all browsers and access the identity unit his shows always the default signed certificate (despite the tab SSL showing otherwise!)

  I rebooted the device and replaced with a new certificate, but this made no difference. Am I missing something?

  See here the response of GrantOrchardVMware vRA: certificate does not appear to extend to the port 5480.

  Essentially of 5480 runs using a different web server certificate is not installed in when you update it. There is a way to update the certificate for the site of 5480 which can be found here vCloud Automation Center Documentation Center

• Error update vcenter SSL certificate?

  Hello people,

  I've recently upgraded to vcenter 5.1 U1a successfully.

  I'm following VMware articles and a popular blog to prepare and run the certificate VMware 1.0 automation tool.

  http://www.derekseaman.com/2012/09/VMware-vCenter-51-installation-part-2.html

  http://www.derekseaman.com/2013/04/using-VMware-vCenter-certificate.html

  Everything was pretty smooth up until I have to replace the the vcenter Server SSL certificate.  Option 2 vcenter update ssl.  See the attached photo.

  After the error, my vcenter service will not start.

  I tried to reset the password of database using vpxd.exe - p, but vcenter still does not start.

  I also checked that the correct service ID is matched between vpxd.cfg and LS_ServiceID.prop.

  Stuck at this point.  I have since went instant return, but try to see if anyone has any suggestions?

  Could this be type a bad password?

  Thank you!

  
  

  You mentioned the KB as well?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2048202

  Concerning

  Girish

• How to update the model of RDS for Windows Server 2012 collection?

  Hi team,

  I want to know how to update the collection of RDS model (model master sysprep) which is used to create the collection?

  I tried the below way but did not get the update of the collection of virtual machines.

  -Start the image of mater of sysprep

  -install the required components

  -resysprep the image and stop it

  -East went to the RDS Collection and added new virtual machines in collection (removed the old his)

  Once created, I opened a session in the machines, but I don't see the updates (I installed some software in the sysprep image however and no is not there in the virtual machines in the pool)

  Can someone let me know if I need to create a whole collection again or the way I do it is a proper way? If it's a good way what could be the reason why I get the new installed software model sysprep image in virtual machines created in the pool, based on the model?

  How do we actually updated for security and other regular patches updated in virtual machines? In my view, we use the same approach?

  Any suggestions will be appreciated.

  Kind regards

  original title: Windows Server 2012 RDS - model Sysprep update process and collection of creation

  Hi MS Expert 2010,

   

   

  I wish that you post your question in the TechNet Forums as it is addressed to an audience of it professionals.

   

  Check out the link-

   

   

  TechNet Forums

   

  Hope this helps!

   

• replace the SSL certificate in Dell OMSA 7.2

  My University is compels me to replace the Dell's SSL certificate in OMSA with a certificate from a certification authority.  We use InCommon.

  I generated a certificate using Microsoft IIS request.  InCommon generated the certificate and got sent back links to a variety of formats.

   as PKCS#7 Base64 encoded:
      Other available formats:
         as PKCS#7 Bin encoded:
         as X509, Base64 encoded:
         as X509 Certificate only, Base64 encoded:
         as X509 Intermediates/root only, Base64 encoded:
         as X509 Intermediates/root only Reverse, Base64 encoded
  
  Does anyone know what kind of certificate I need, and exactly how to install it in the apache server that runs Dell OMSA.
  

  Ok.  I have an answer.

  As far as I know, the interface Dell OMSA itself does not have to import the intermediate certificates (returns an error) and cannot be used to create a useful CSR (signature request) because you can't specify your own institutional settings. Our CA would not authenticate the CSR request generated by the Dell OMSA interface, even if it would incorporate new certificates (which she seems to fail at the).

  The simplest approach is to generate a CSR in Windows IIS, the authenticated certificate back from your CA, and then to export to a .pfx file (private, final, intermediate entity certificate and certificates root key, extended attributes).

  Use IBM tool called keyman (download www.ibm.com/developerworks).  Use the version of Windows.

  It can convert a .pfx file in a keystore apache in 3 easy steps.  1. create a new key file

  2 import the .pfx file 3. Save the key file.

  Tips on the internet suggest keeping all the passwords the same - pfx export, keystore, key, etc.

  Edit the server.xml file in the apache server to use your new password.

  Only downside is that your password will be readable text in the server.xml file.  In the original file server.xml file Dell used system tools or java to hide passwords.

• SSO hosts SSL certificate is unknown. You can fix this since the SSL Certificate tab

  I'm trying to reregiter my vro with sso authentication but I keep running into this error. The certificate has already been imported.

  any idea? Basically, I removed the vro unit and deployed a new and now problems with registration of SSO. I need to remove the plug-in vcenter first vro?

  

  Looks like you have imported the ssohost:7444SSO certificate. You must also import the ssohost:443 host SSL certificate