Unable to connect to the VMware Research Service - the SSL certificate verification failed

Similar Questions

• "Unable to connect to the printer. Operation failed with error 0 x 00000866", setting up a network printer

  Title of the Moose: error 0 x 00000866

  I have a laptop with windows 7 Professional.

  When I try to install a network printer I always get the message "cannot connect to the printer. Operation failed with error 0 x 00000866.

  What can I do to fix this

  Hi ETPM.

  You can try the following steps and check if it helps.

  Method 1:

  You can try to start troubleshooting printer and check.

  Check out the link:

  Open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Note: You can read this article and try to proceed as for Windows 7 also.

  Important: Serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow the steps in the link mentioned above carefully. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/windows7Back-up-the-registry

  Method 3:

  If the fix above is unable to get the printer working on your client machine to vista, so I suggest to follow the steps mentioned by Afzal Taher as of Friday, December 18, 2009 02:00.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/954c4b9d-2F4C-4b1b-8fb6-49204ed96dfc

  Also check out the link:

  Install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to the server with ttisqlcs, failed to retrieve IP address of the system

  Please help me, I have installed timesten server and client on different machines in the LAN, but with the same user and group - ttadmin:ttgroup

  When I tried to connect to the server with ttisqlcs - connStr "DSN = sampleCS"

  The result gave me errors like below

  Connect "DSN is sampleCS ';.

  S1000: Unable to retrieve the IP address of the system. System error:-2

  The command failed.

  Fact.

  The related part in sys.ttconnect.ini is defined as below

  [192.168.0.206]

  Description = TimesTen Server

  Adresse_reseau = 192.168.0.206

  PORT_TCP = 53397

  And the sys.odbc.ini

  [ODBC data sources]

  sampleCS = TimesTen 11.2.2 Client Driver

  [sampleCS]

  TTC_SERVER = 192.168.0.206

  TTC_SERVER_DSN = nredb_ds

  That wants it mean by 'recovering intellectual '?

  He is trying to resolve IP by hostname even when I already gave him the ip address?

  Either way, I can ping 192.168.0.206 and telnet to port 53397 without problem.

  Please help me, thanks ~

  It does not matter that they are VMs (I use between virtual machines all the time), but "Networking" of VM, of course, must be set up correctly. But if you can ping and telnet between VMS so that shouldn't be a problem.

  On the client computer, you have an entry in/etc/hosts for the client machines and the server? Even on the server? Please check that and add entries if they are not there and see if it helps. If not then we need to find the client using 'strace' to see which system call fails. Please try and after the release (or at least the last part that leads to failure).

  Thank you

  Chris

• Unable to connect to the new user profile failed error user account

  I just created a new user account, but I can't open the new user accout I get an error indicating the failure of user profile, please help

  Hi lol123-179,

  ·         What is the exact error message?

  I suggest you follow these methods.

  Method 1: Follow the steps in the article.

  http://support.Microsoft.com/kb/947215

  Method 2: Follow the steps in the article on how to fix a corrupted user account.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• HOL-SDC-1303 - VMware NSX - unable to connect to the Service research

  Hello

  I can not connect to the HOL-SDC-1303 - VMware NSX. It reports: unable to connect to the Service research.

  Anyone else having this problem?

  Gabrié

  Gabrié

  This could be a case of the vPOD not 'hot' or fully loaded, is there a chance you can try to run the lab, once the console is in place, may have to wait a few minutes (coffee break) and try again...

  I'll go ahead and run the lab to see if I feel the same way...

  Concerning

  Pablo

• Unable to connect to the VMware web service: invalid key file

  Hello

  We have a CPO 2.3.1 who refuses to connect to vCenter (see newspaper excerpt at the end of the post).

  Recently, we changed our server vCenter (part of a 5.1 update).

  We tried the following workarounds:

  • Remove and add all the elements of the platform from the portal using services SE
  • Re import automation packs (4 of the Starter Edition v2.3.1.38)
  • Re on the keystore password

  No change at all...

  Do you have an idea on how to fix this?

  Thank you.

  Kind regards

  Stone

  || 235. 02/10/2012 15:46:21.667 | 6072. WCF: http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord ' gravity 'Error' = >http://msdn.microsoft.com/en-US/library/System.ServiceModel.Diagnostics.TraceHandledException.aspxhandling of an exception. . Tidal.Automation.Server.exe Tidal.Scheduler.Common.Communications.CommunicationException, Tidal.Scheduler.Common, Version = 2.3.0.0, Culture = neutral, PublicKeyToken = fba593b23cf207cdthe connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: Invalid keystore. to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)Tidal.Scheduler.Common.Communications.CommunicationException: the connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. & lt; & gt; c__DisplayClass1c. & lt; PerformServerAssistedOperation & gt; b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object instance, entered to Object [], Object [] & amp; outputs)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & amp; CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  || 236. 02/10/2012 15:46:21.667 | 6072. An exception that is not of type rhapsodyexception has been captured while a webmethod call was made.  This exception has been intercepted and generic.

  || 231: 02/10/2012 15:46:21.667 | 6072. EXCEPTION (Tidal.Scheduler.Common.Communications.CommunicationException): The connection attempt (VMware vCenter Server (603) @VMware vCenter Server (603)) failed due to the following error: unable to connect to the VMware web service: invalid key file.

  Stack trace: at Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (ServerAssistedOperation operation, target TargetConfiguration, RuntimeUserConfiguration runtimeUser)

  to Tidal.Automation.Server.JavaAdapterBase.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter. <> c__DisplayClass1c. b__1b(IAdapter adapter)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, haltingAction Boolean, Int32 remainingRetries)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction, Boolean haltingAction)

  at Tidal.Automation.Engine.Core.AdapterLifecycleManager.PerformAdapterAction (Guid IDCarte, action AdapterAction)

  to Tidal.Automation.Engine.Core.Adapter.SuspendableAdapter.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Engine.Core.AdapterSystem.PerformServerAssistedOperation (operation ServerAssistedOperation)

  to Tidal.Automation.Server.WebService.AdapterService.PerformServerAssistedOperation (operation ServerAssistedOperation)

  at SyncInvokePerformServerAssistedOperation (Object, Object [], Object [])

  at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke (object, Object [], Object [] entries & exits instance)

  at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31 (MessageRpc & CPP)

  at System.ServiceModel.Dispatcher.MessageRpc.Process (Boolean isOperationContextSet)

  You have an invalid key file because the HTTPS certification has changed. You must remove the old keystore file and restart the OPC Server and then reconnect / run something against vCenter.

  It is also possible to host Adatper framework/java problems I've seen often.

  If you need more information, you will need to prosecute TAC with your service contract please. Normally, we try to solve no newspapers on the forums.

  -Shaun Roberts

  CIAC/CPO support team leader

  [email protected] / * /.

• Error created another Console service, unable to connect to the host by vSphere vCenter

  After creating an another Service Console unable to connect to the host by vSphere vCenter. How can I remove the now Service Console or make the old one further work well?

  Thank you.

  George

  This KB will show you the steps to re-create the Service Console, but you'll need to console or ILO access to the ESX host.

  http://KB.VMware.com/kb/1000266

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• After a virus, I am unable to connect to the internet. Event log messages: the NetBios over TCP/IP service failed to start due to the following error...

  original title: NETBios TCPIP of missing in Device Manager

  I recently had to run two antivirus programs on an infected computer and am now unable to connect to the internet. When I went to the event viewer, I noticed the following error messages:

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7000

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The NetBios over TCP/IP service failed to start due to the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 12:31:17

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The DHCP Client service depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 16/01/2012

  Time: 13:32:01

  User:                       N/A

  Computer: JARRIOUSSTUDIO

  Description:

  The helpdesk TCP/IP NetBIOS depends on the NetBios over TCP/IP service which failed to start because of the following error:

  A device attached to the system does not work.

  When I look in the Drivers folder, I see netbt, but devices & Non Plug and Play Devices, of TCPIP NETBios is not listed in Manager.

  Hi Diddy Dell,

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Unable to connect to the web proxy/services

  Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router.  I tried wireless and ethernet.  Connectivity seems good.

  Resolved.  Port forwarding blocked by another application of verizonwebcamera problem.

• My weather Gadget says "unable to connect to the service. I use this gadget for years and it does not work.

  I use Windows 7 Enterprise and since the beginning of February this year (2015) my weather Gadgets stop working, they first show the forecast and now they are showing a message "unable to connect to the service. Is there a problem with the gadget?

  Everyone!

  I recommend this link with more instructions and information on how to solve this problem of wwcc1 and his post on 2015-Feb 5: here

• MY WEATHER GADGET IS NOT WORKING.IT SHOWS "UNABLE TO CONNECT TO THE SERVICE.

  Original title: WEATHER GADGET

  MY WEATHER GADGET IS NOT WORKING.IT SHOWS "UNABLE TO CONNECT TO THE SERVICE. I TRIED TO CHANGE THE LOCATION, BUT IT IS OF NO USE. PLEASE HELP ME SOMEONE.

  When you click Download and install, click on save, not run and save it to the desktop. It will be a Zip file which you right click | Extract all.

• BB Simulator, get: "unable to connect to the selected Mobile Data Service, please try again later."

  I run MDS firstly, it seems well, window is open. But when I run the Simulator, in my case 8300. I get error when you try to access any web resource: unable to connect to the selected Mobile Data Service, please try again later.

  I've initially tried to do this on win7 and moved to xp, which solved my problem of MDS, but I still can't get networking funciton on the Simulator. All that I'm missing? Need to make

  Had, it works with the help of Michael on StackOverflow.

  On Win7.

  (1) uninstalled java and things bb.

  (2) fresh installed JDK 6 with the SDK

  (3) path added to jdk/bin to the path environment variable

  (4) downloaded Simulator runing 4.2 os No 4.5

  (5) installed MDS and Simulator in folder BlackBarry under C: /, runing administrator installation

  (6) powershell started as an administrator

  (7) sailed to MDS folder via powershell run.bat and executed

  8) sailed to BB Simulator via powershell folder and run 8300.bat (downloaded 8300 simulator)

• Unable to connect to the selected mobile data Simulator service

  First of all, let me say that I am a newbie with BlackBerry and simulators.

  I just downloaded 9630_Verizon and 9630_Sprint simulators as well as the MDS Simulator package. I start the MDS Simulator and the DOS window opens and seems to work very well. I start be 9630 simulators and while it seems to work, when I click on the button of the browser and try to go to any web page, I get:

  Unable to connect to the selected Mobile Data Service, please try again later.

  The version of the 9630 Simulator is 2.12.0.47

  The MDS Simulator version is ' SCM 4.1.4.19 19 2007/07/10»

  I can connect to the MDS Simulator using my browser of desktop connection to localhost: 8080. Statistics show all values of zero, so it seems that the 9630 is not yet connect to the Simulator. Is there a configuration file somewhere that I have to change to make it work?

  After that I posted this, I continued to search the forums of possible solutions. One recommendation, I found was to delete the files ".dmp" and restart the device Simulator. That did the trick, things work now.