update the windows definitions

Similar Questions

• Is it possible to reset the date of the last virus and update the spyware definitions in XP?

  I have xpsp3.  I was looking at my calendar to find out what day of the week, an event that happens in November, and unfortunately I forgot to go back to the date of the day before I have updated the definitions of viruses and spyware on MSE.  Now, MSE think my latest definitions of viruses and spyware are obsolete, because they were supposed to be updated three months from now.  So my question is: is it possible to reset the date of the last virus and update the spyware definitions in XP?

  Correct the date on your computer. Remove the antivirus/malware product and reinstall.

  -OR-

  To restore before the update, use the system restore. Make sure the date is correct. Update.

  Tom Ferguson

• Update the window asking me to install visual c++ 2005 and 2008 sp1. Do I need to install on my machine?

  Update the window asking me to install visual c++ 2005 and 2008 sp1. Do I need to install on my machine? I'm under win xp edition family pro on a Dell 3000 with 1.25 GB of ram.

  Some programs on your computer may be using visual c ++. If you are offered the updates, then you must install the.

• I'm not having implemented the cd with me. How can I update the window components. by mistake I uninstalled the

  I'm not having implemented the cd with me. How can I update the window components. by mistake I uninstalled the

  Reinstall windows components, you've accidentally deleted when you have the game CD with you.

• update the window "WindowsUpdate_00000643" error code

  I'm trying to update the window on a computer hp laptop vista Home Edition I get this error windows cannot install "WindowsUpdate_00000643".

  Can you please help

  Here are the steps on how to solve the problem.
  Step 1: Download Microsoft Windows Installer CleanUp utility
  ====================================
  1 visit:
    http://download.Microsoft.com/downlo...BD/msicuu2.exe
  2. save the file on your computer.
  3. right click "msicuu2.exe", click "Run as Administrator" and follow the
  Wizard to install this tool on your computer.
   
  Step 2: Remove the .NET Framework
  ========================
  1. click on start - all programs - Windows Installer Clean Up, click on allow.
  2 see if you can find .net Software Framework. If so, remove them.
   
  After that, restart the computer and perform the following steps
  suggestions to reinstall .NET framework 1.1 and updates for it.
   
  Step 3: Install .NET Framework 1.1 Redistributable Package and updates
  ==================================================
  1. Please download the Microsoft .NET Framework Version 1.1 Redistributable
  Package from the following link and save it to drive C (C:\)
   
  (1) Microsoft .NET Framework Version 1.1 Redistributable Package
   
    http://download.Microsoft.com/downlo...6/Dotnetfx.exe
   
  (2) Microsoft .NET Framework 1.1 Service Pack 1
   
    http://download.Microsoft.com/downlo...867460-x86.exe
   
  (3) security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1
  (KB928366)
   
    http://www.download.windowsupdate.co...d81a178b15.exe
   
  (4) .NET framework 1.1 Service Pack 1 SYSTEM. WEB. DLL and MSCOREE. DLL Security
  Update for Windows Vista (KB929729)
   
    http://download.Microsoft.com/downlo...929729-x86.exe

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• What should I do to update the Windows Photo Gallery?

  I try to send pictures of the Windows Photo Gallery, but he said: I'm not supported or I need to update the Windows Photo Gallery. How do I do that? I don't know where to go.

  RE: How to upgrade Windows Photo Gallery

  Open Windows Photo Gallery > file > Options > under automatic updates, run a make check "tell me when". "> click on" Check for updates "> click OK > OK again. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Could not update the window?

  Recently, my window are omitted to update the window service pack, I would like to know about how evil it is.
  Once, it downloads all service packs required, but fails to install.
  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932):
  https://www.Microsoft.com/en-GB/download/details.aspx?ID=5842

• I can't update the Windows Defender definitions and get this message: the program can't check for definition updates. Error: Code 0xc8000408.

  Impossible to find info on what this means or what to do so I can again update in Windows Defender. This error message has begun to appear recently, or at least I think. I thought it was set to automatic update, but when I tried to do it manually because it says it's expired. Tried several times but get the same message every time.

  You are welcome. Your computer must NOT be connected to the internet or networks without a fully functional antivirus, completely update installed application. But first, let's take care of any Norton "leftovers"...

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  Now, you will need to download/install an antivirus application. While I do not recommend professionally AVG, you might find that AVG Free 9.0 more compatible if you choose a CUSTOM this time installation above and don't install NOT of Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
     http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Otherwise, I can recommend Microsoft Security Essentials*, Avira AntiVirand Avast (all free) and NOD32 and Kaspersky (not the suites 'internet security'). After you have installed your AV application selected, manually & repeatedly updated until you get one invites 'no more updates'.

  [Avoid Norton & McAfee IMHO applications.]

  =============================
  * Microsoft Security Essentials (MSE) includes components of antivirus and antispyware protection. The latter will replace (and must turn off automatically) Windows Defender in Vista.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update the window hangs on reboot (stuck at 15%).

  So, I recently participated a construction of a new Windows 7 machine. The installation went well, everything works fine. That is until it came time to install the latest updates. When I try to install the updates, he does his thing and prompts to restart the computer. When I restart, it begins to apply updates and gets stuck at 15%. I let it sit for hours and just 15%. The only way I can get out is to kill the power and restart the computer. When it restarts, the same problem exists.

  Here's the update in question:

  http://img.Photobucket.com/albums/V251/wildernessman33/update.PNG

  Please let me know if you can help. Thank you.

  Hello
   
  
  1 did you encounter any error messages during the installation of the updates?
  
  You tried to install several updates in a single attempt that might have caused the conflict.
  Our first goal is to start the computer successfully. We can try a few methods.
  First check to see if there are external devices attached to the computer, if so remove and check.
   
  Method 1.
  Let us run repair system at this stage, it might solve the problem.
  See the following articles for additional help and steps on startup repair.
  Startup Repair
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
   
  Method 2.
  I recommend you to restore system using a Windows 7 DVD.
  Here's how:
  To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
  To use this method, you need to restart (boot) your computer using the disk.
  a. Insert the disc.
  b. restart your computer using the power button on the computer.
  c. If prompted, press any key to start Windows from the installation disc.
  o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
  d. choose your language settings, and then click Next.
  e. If you are using the Windows installation disc, click on repair your computer.
  f. Select the Windows installation you want to repair, and then click Next.
  g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
   
  If we are able to boot to the desktop now I asked to install the updates one by one and check which application is at the origin of the conflict.
  Method 3.
  If the bows persists please verify if you are able to boot safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Updates the window appear when shutting down, but do not set up the next time you start

  The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

  Hi BonnieDoon,

  1. did you of recent changes on the computer?

  2. you receive error message during the update by installing the process?

  Method 1

  See the Microsoft article below as well as try the steps mentioned and check if it works.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Method 2

  Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updates the window: KB974417, KB979909, KB982168 do not settle

  Since a few days my computer tried to download and install these updates 3.
  As far as the updater is concerned, they download and install fine showing successful, however seconds after Windows Updater is complete "Install these updates" he asks again if I want to download and install the same updates.

  Although KB974417 gives me an NDR 0x66A

  Hi, the bad news is that .NET Framework is damaged and you will need to reinstall it.

  Use it as a guide (I got the same error 0x66a code):

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  Regarding the cleaning tool, download it here, use the 2nd link on the download page:http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  namely: http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip

  When I have had problems with the .NET Framework and had to reinstall, use the cleanup tool to remove all frames on my computer.

  With the help of WU (automatic), I then installed .NET Framework 3.5 and then returned to 1.1, 1.1 SP. Leave it to THE day those and if all those optional went for them.

  After all, I even threw in .NET Framework 4.

  It was annoying and time consuming but now .NET Framework is up to date and works well.

  As to why it became corrupt, who knows.

  TaurArian [MVP] 2005-2010 - Update Services

• Error code 80070424 during the application update the window and installing the Apple Application Support

  Hi guys,.

  I am running Windows Vista Premium Home 64 bit. This all started when update me my iTune recently and since then it has been a headache after another. Basically, when I try to install iTune, it says that I need to install Apple Application Support first, and when I do that, I get the following message appears:

  "An error occurred during the installation of assembly"Microsoft.VC80, CRT, Version... ". "and it lights up.

  In addition, I also tried to install Vista SP 2 recently but my window update also gives me a pain. I can't get the update because when I try, it says 80070242 error code - Windows Update encountered an unknown error.

  Here are the pictures of the 2 filters:

  • The problem of Apple Application Support
  • The Windows Update error screen

  Any help at all would be greatly appreciated.

  Thanks for the suggestion of Augustine, but the problem is still present. The order went through, but I always feel error 80070424 and is possibly due to a malfunction of Windows Installer Module.

  Thanks for the attempt. Appreciate it.

  Suggest you check to see if the Windows Modules Installer service is present, has not been disabled and can be started.
  Right click the computer on the desktop or the Start Menu and choose Manage
  The UAC prompt to enter a password if one is used, then click on continue or Yes.
  If no password is used, click on continue.
  Click the arrow next to Services and Applications
  Click Services in the left frame
  Scroll down the list of Services in the context of e right until you come of Windows Modules Installer .
  If it is present, check under Startup Type to see if it has been disabled.
  The default setting is manual.
  At the top left will be a link to start the service
  Click on it and see if the service can be started.

  If the installer of Modules of Windows is disabled, right click on it and choose Properties .
  Set the startup type to Manual , click on apply, OK.
  Close the computer management console.

  If the Windows Modules Installer is not present and of Flavius are too difficult for you to follow, then replace
  Contact MS Support free of charge.
  Start here
  Make a mark next to "I use it for my own personal use.
  Now click on the button continue.
  Click on the I accept"" button.
  Support options will be displayed. The only option I see here is for email support.
  Click on the button continue to access the support request form.
  Fill in the fields and then click on the button continue.

  MowGreen Services consumer safety update

• Vista does not refresh please help to update the Windows Update

  Vista will not install updates (V4BizSP2) Please help Hello! Please help if you can. We have a bit of Lenovo (ex - IBM) laptop under Vista Business SP2. While it has allowed a small number of updates, especially when run us Windows Update through the effort for a while and then said: we need to update Windows Update (himself). We click so to do. Then after some time it returns to the initial screen (when you click to perform a Windows update). Thus, we believe that everything is fine and that Windows Update is udated (himself), and ready to go (do its work). SO we click on it and... voila... the cycle repeats..... She tells us eventually need update Windows Update (alone, once again). To check (with history of installation), which has been updated, usually nothing. The latest updates that automatically enrolled as successful were then more: last week and since then were not successful however. Told us to download and install the update to windows directly from the microsoft Web site. We did the download, he said that he filled very well. He asked if we wanted to install. We clicked on Yes. He worked on it for a while and then says installation failed. ?????????????????????? We have Vista Business Service Pack 2, and Norton 360, and it's a 32-bit machine. Any help is very appreciated, especially if it is super easy for computer-illiterate. Thank you very much!

  Hello

  Could you please answer these money questions?

  one) when are you facing this problem?
  (b) do you get errors when updates fail?
   
  You can open the site Microsoft.com/downloads link and download the updates manually and then install it. If the installation fails, then try the following methods.
   
  Method 1
   
  Reset windows update components and then try to install the updates and see if the installation is complete. Open the link below and click on the cue, he touches.

  http://support.Microsoft.com/kb/971058
   
  If this is not enough, you try the next method.
   
  Method 2
  Try to download and install the updates manually. Visit the link and enter the KB number
  for updates and download the same.

  http://www.Microsoft.com/downloads/en/default.aspx

  All the steps suggested to try the link below.

  http://support.Microsoft.com/kb/822798
   
  Try these steps and let us know the answer.

  Thank you, and in what concerns:
  Suresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Updates the window - the page cannot be displayed

  original title: the window updates

  When I try to do the update of window I met site problem can not display the page

  What should I do?

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Properly installed service pack 1 status has not updated the Windows edition information.

  Original title: windows vista 32-bit sp1

  just installed the new hard drive on laptop. re-installed windows vista Home premium 32-bit. Traverse and filling all windows updates. service pack 1 is now next in line. 1.9 MB file downloads and "installed". do not reboot several times or take an hour or longer. complete in a few minutes. Windows update said installation was successful, but when I go into the system settings to make sure that the windows edition has changed, it is not sp1 as it should. I just have to wait a little while and try again, or is there some other im in question has not detected? something would be useful. system works great otherwise :-) Thank you.

  Hello

   
  Using Windows Vista 32 or 64-bit?
   
  How to determine whether a computer is running a 32-bit version or the 64 bit version of the Windows operating system.
  http://support.Microsoft.com/kb/827218#Method1
   
  I would say you can download service pack 1 manually, install on your computer and check the status of the issue.
   
  If you are using Windows Vista 32-bit, you can download service pack 1 from the following link.
  Windows Vista Service Pack 1 five language standalone (KB936330).
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30
   
  If you are using Windows Vista 64-bit, you can download service pack 1 from the following link.
  Windows Vista Service Pack 1 five language standalone for x 64 (Kb936330).
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21299