Update v5 - 571p to windows 8.1

Similar Questions

• U940 FN keys - 11K of satellite does not work after update to 8.1 Windows

  Hello

  I just updated my Toshiba Satellite Windows 8.1 and the FN keys don't work anymore. the volume and shine those who are still working.

  I can't even turn the backlight on the keyboard.

  Can someone help me with this, please?
  Thank you.

  Update you the drivers Toshiba and the tools that are available on the page of the Toshiba UE driver?

  I guess you read that information, details, and step by step instructions on 8.1 Win Upgrade on this Toshiba update to 8.1 Windows website

  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

• Desktop HP HPE h9-1150 Phoenix: can you do a update the BIOS of Windows 8 while on a Windows 10 operating system?

  As indicated in the title, you can do a BIOS in Windows 8 update while on a Windows 10 operating system?

  I have a Phoenix desktop h9-1150 and am trying to install a new GPU GTX970. There is no updated BIOS for Windows 10 at this time, but there is an update of my current BIOS 7.07 for Windows 8 OS. Can I do that Windows 8 updated safely?

  Normally the flasher will check to verify the operating system, but I can't on this one.  It does not separate out ROM file, even if it does not check if the operating system you can always extract the file BIOS and flash BACK.  I would try it first in windows.  It will tell you if there is a control in place.

• Laptop HP Pavilion 2320DX g4: computer hp laptop pavilion g4 does not start successfully after update and return to windows 8.1

  Hi, I have recently updated my laptop to Windows 10. He had so many problems and I didn't like it at all, so I just returned my laptop to Windows 8.1.  Since then, my laptop does not correctly every time, and the fan immediately starts to work as well. I can start my pc and connect to my home screen each time.  If the tile is moving or light up when I move my cursor, then I know that I can use my laptop for a little while. It can freeze after getting out a good program. Other times when I start my laptop, everything is dead except for logging on my screen. My Windows key on the keyboard does not work most of the time.  If the screen does not respond the first time I turn, as described above, I can't absolutely nothing on my pc. I can't access the search bar by moving the cursor to top right, I can't open the tiles, I can't spend in desktop mode, etc.  Front I upgraded to Windows 10 and downgraded to 8.1 all worked perfectly, because I've updated from 8.0 to 8.1 Windows almost 2 years.  I have a defective battery. in fact I can only use my laptop if it is plugged. My fan is constantly going, but I don't know if it's my loss of battery or what's wrong with my pc now.  I have described my problem in the Microsoft community forum but have had little response that was not helpful. I was told to go to the command prompt and put in DISM: scan now (which also contained letters more than that, but I do not remember all). I followed the instructions and for 2 days, my pc seems to do better. Then he returned to this problem again. I hope you can help me.  If you have additional questions, post here or please email me at [removed personal information]. Thank you!

  DEB

  @DWESTDEWITT,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Satellite A110 - update the BIOS for Windows 7?

  Hello. I found two drivers support page to your versions of BIOS for my Toshiba Satellite A110:
  01/21/09
  Update the BIOS
  Toshiba Windows Vista 32 bit 5, 40 - WIN World Wide
  01/21/09
  Update the BIOS
  Toshiba OS independent 2, 00 - WIN World Wide

  In 'other info' page on first bios there is a warning that this version is only for windows vista, and on the second page 'other info' he warns, that this version is not compatible for notebook computers equipped with Windows Vista.
  My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?

  My second and more important question is what version of bios should I install if I now use WINDOWS 7 32 bit?

  Hello

  > My first question is what this means? If I have OS Toshiba idependent 2.0 BIOS will not install Vista?
  You should be able to install Vista using BISO 2.0 but maybe your laptop will generate some questions
  So you need to update the BIOS to 5, 40 - WIN version if you want to use Vista OS.

  If you want to use Win 7 on your laptop then you must first install the Win 7 OS and then you should check out how Windows 7 is running

  Welcome them

• Satellite A210-16f - after the BIOS update pops up a window with password

  Hello

  I tried to update the BIOS on my Toshiba Satellite A210. I downloaded an update from the official site of Toshiba, and then I did everything according to the instructions.
  I've updated the BIOS under Windows.
  Update at the end, a massage "updated successfully" appeared and I just need turn on the computer again.
  So I did, and there was a problem.

  When I turn on my computer now, it shows me a blue window with a password. I don't know password.
  Maybe you know how to disable the password or you know some passwords for Toshiba which corresponding?

  Toshiba doesn t have a sort of universal password, and unfortunately, no one here can help you with this problem.
  I just hope that you have downloaded the good BIOS upgrade for your laptop model.

  The password can be removed by the Toshiba service provider. They can do it in 15 minutes.
  Sorry, but buddy I'm afraid there is nothing you can do about it.

• HP-101 webcam does not; After I updated its os to windows 7 (64 bit) to windows 8 (64-bit).

  I urgently need my webcam this week for a place of encounter of the celebrity, and I'm upset.
  I tried several measures then 15 and already spent a day on same; Please if anyone can help me through teamviewer; I'll give him some good buys online and owe him a big hug.

  Here is my pc name and number-
  HP Pavilion Notebook PC g6
  LP235EA #ACB

  All the drivers are updated

  the cam is nt shown under imaging devices; He has appeared in other devices Port_ #0005.Hub_ #0004

  Please msg me; If anyone can help me through teamviewer; Please

  hard reset, running on cmd, uninstalling the driver, analysis of material changes in the imaging devices, then reinstall etc etc; I've tried everything

  Here I found the solution at last
  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-101-webcam-not-working-after-i-updated-OS-it-from-Windows/m-p/2732469#M21848

• update graphics card for Windows 7

  I just updated my computer from Windows XP to Windows 7. My graphics are blurred, and I can't set the resolution properly. I think I need an update for my graphics card. Help?

  Post here instead, please: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware

• I don't like the update Spider Solitaire in Windows 7. Is it possible to install the version that I had in XP?

  original title: Spider Solitaire
  I don't like the update Spider Solitaire in Windows 7.  Is it possible to install the version that I had in XP?

  I found a way to do it myself.  I knew someone who was still using Windows XP, and with his permission, I found all the files of spiders by searching, put them on my backup stick and put the files on my computer at home.  I just put it on the desktop so it is easy to find and it works very well.  Only, I transferred the .exe file.

• There was an error Code Ox800710D9 when you try to update and install the Windows SP2

  I can't update Windows XP SP2 due to an Ox800710D9 error code.

  Hi frankhunt,

  Try these steps and check the result.
  Step 1: Stop the Cryptographic Service
  a. Click Start, click Run, type services.msc in the Open box and then click OK.
  b. in the Services dialog box, click Cryptographic Services, and then click Properties.
  c. in the cryptographic services properties dialog box, click the general tab and then click on stop.
  Option Service status changes to Stopped.

  Step 2: Remove the Windows Update.log files
  a. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
  b. click the Folders box, click the Windows folder and then click the System32 folder.
  Note If you receive the following message appears, click Show the contents of this folder:
  "These files are hidden.
  This folder contains files that keeps your system works correctly.
  You should not change its content. »
  c. click on / open the CatRoot2 folder.
  d. remove the Edbxxxxx.log file.
  Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.
  e. Click Start, click my computer and then double-click the hard disk where Windows XP is installed. For example, double-click the C drive.
  f. click the Folders box, click the Windows folder and then click the Security folder.
  Delete the file Edbxxxxx.log.
  Note: In this step, xxxxx is a placeholder that can represent any combination of letters and numbers, numbers or letters.

  Step 3: Start the Cryptographic Service
  a. Click Start, click Run, type services.msc in the Open box and then click OK.
  b. in the Services dialog box, click Cryptographic Services, and then click Properties.
  c. in the cryptographic services properties dialog box, click the general tab and then click Start.
  The service status option changes Started.

  Step 4: Install the service pack
  a. visit the Windows Update Web site to update the computer to Windows XP SP2: http://windowsupdate.microsoft.com
  b. install the update and check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Encountered the error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198)

  I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).

  I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.

  Ran the update without any firewall or AV program running and still received the same error.

  AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.

  Hi a93svtf,

  This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.

  Step 1: Run the fixit available in the article below

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

  Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Now, try to install the update

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Code800F900 'unknown error in windows update' trying to download windows vista service pack 2

  try to download windows vista service pack 2. Last update was on May 21, 2010. For a few weeks or months, the computer can be terribly slow. Often a hard drive rattle sound. For this, I tried anti-spyware, last week I installed and ran AdAware from lavasoft. It found nothing except two small cookies. A few weeks earlier, I had done the same thing using windows Defender. Also nothing. Along with a check disk hard I did not find much either. What end of the lifecycle for this computer, now about 3 years? He was one of the first available vista computers. Thank you for your help, Peter

  * Original title * Code800F900 'unknown error in windows update', try to download windows vista service pack 2__I have an oem version purchased with HP model s7720.nl

  Why did you delete your post where you said that Norton application has been installed at some point in the past?

  There is nothing wrong with the guarantee of these forums, but I'd be willing to bet that there is something VERY wrong with the security of your computer!

  Let's cut to the Chase. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I updated my computer to windows 7 and now I'm having problems with my dns, I can't always on; the line. tells me having a problem with my dns server

  updated my computer to windows 7 and now can not conect with the dns can not get online always

  Upgrade to Win7 has nothing to do with Windows Update.

  See http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet or post in this forum for assistance: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• UPDATE ROLLUP 1 FOR WINDOWS 2000 (KB891861

  When I download and install an update (Update Rollup 1 for Windows 2000 Service Pack 4 (KB891861), my computer won't reboot (reboot), it keeps restart and windows will not start.) Help?

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.General

  Above is the link to the General Windows 2000 discussion group.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.windows_update&cat=en_us_59ae21ed-54d8-490d-8BF3-8741cee780a4&lang=en&CR=us

  And the group discussion Windows 2000 update.

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Problem, reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005

  I have problems with MCE 2005.  My hard drive crashed and the technician that restored my repressive said that he could not work in MCE 2005.  It's a shame because he was working before the hard drive crashes.  I work with windows XP.
  When I go to install the internet and begin to test the connection it gives me "Critical error of process - Code 2"
  When I go to the TV configuration, it tells me "Tuner not found".  Even if I know it works because I also Win TV7 in Hauppauge. My TV tuner is HVR-1600.
  With these problems, I thought that the solution might be to reinstall rollup 2 according to the Microsoft.
  http://support.Microsoft.com/kb/910905
  However, when I go to reinstall the Update Rollup 2, it seems to be to establish a restore point and then it stops when it hits hotfix (KB891593).
  I took a copy of the mcelog and have attached a copy of the log below.

  Assistance or management, you can provide me to solve this problem would be highly appreciated.

  At this point, I'm a newbie to this and I don't have a clue as to the cause of my problems and any ideas you may have for me would be much appreciated.

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package

  A generic Package: 10/28/10. 21:32:48
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB891593 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1046.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package

  Process creation: WindowsXP-KB895961 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1047.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899337-v2 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB899510 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB888795 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Process creation: WindowsXP-KB902841 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1043.

  A generic Package: 10/28/10. 21:33:02
  Looking for an existing installation of the generic package
  Creation process: KB900325.exe/quiet /norestart
  0x00000bc2 returned by process

  Function (ExecCmdInThread) Message of Post for the Package id: 1048.

  "Creative process: c:\0f7019deb34a2ccd3d5c2a4d9e4f3e57\bin\wmfdist95.exe/q: a/r: n /C:"wmsetsdk.exe/WMFDIST/q/r: n /DisallowSystemRestore.
  Process returned 0 x 00000000

  Function (ExecCmdInThread) Message of Post for the Package id: 1044.

  A generic Package: 05/12/11. 21:26:14
  Looking for an existing installation of the generic package

  A generic Package: 05/12/11. 21:26:53
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 06/03/12. 21:27:50
  Looking for an existing installation of the generic package

  A generic Package: 06/03/12. 21:28:23
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 09:44:39
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 09:45:16
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  A generic Package: 12/02/13. 10:11:58
  Looking for an existing installation of the generic package

  A generic Package: 12/02/13. 10:12:30
  Looking for an existing installation of the generic package
  Process creation: WindowsMedia10-KB895572 - x 86 .exe/quiet /norestart
  Process returned 0 x 00000643

  Function (ExecCmdInThread) Message of Post for the Package id: 1045.

  Hi kwanray,

  Welcome to the Microsoft community. According to the description of the problem, you can not reinstall the Update Rollup 2 for Windows XP Media Center Edition 2005.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Update Rollup 2 for Windows XP Media Center Edition 2005

  Reference: Support for Windows XP Media Center Edition 2005

  Let us know if you need help with Windows related issues. We will be happy to help you.