Update Vista caused constant restarting PC

Similar Questions

• Update Vista causing an error code 10 on my dvd player

  After one of my systems reformatting, I get an error code 10 on my dvd player. Everything works fine until the updates for Vista (Vista Home Basic) are installed, then the drive is dead. I replaced the drive, but got the same thing. I tried to uninstall the device and update the driver in Device Manager and I get an error telling me that the unit was not installed correctly.

  Any suggestions...?

  Thank you

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• After clean install updates vista cause blue screen of death__

  After that a clean install of vista cds coming from the laptop of dell computer purchase fine until I install 80 updates of windows. I get blue screen when restarting updates but passes so fast, I can't pause to read. Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Update Vista caused internet connection problems

  I have tried repairing computer of my sister, who says simply ceased to connect to the internet all of a sudden.  She said that began February 1... After looking through the system restore, I noticed there was an update installed on 31 January, so I restored the computer to the day prior to that, and now the internet works again.  Since then, I have disabled the automatic updates.  My question is: How can I solve this problem?  I can't leave just for always updates disabled...

  Hello
   
  Please can you us on the update that is causing this issue?
   
  This problem occurs especially if there is a conflict between the update and the application program on your computer, mainly the antivirus program.
   
  That's why I suggest to disable and re-enable the antivirus program or the security on your computer and try to update the verification of updates if the problem is resolved.
  Ensure that you re - activate the security on your computer program after a repair.
   
  Try here to reset windows update components and then try to install the updates.
   
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Also, I recommend you to uninstall and reinstall the network drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and
  Maintenance and then click Device Manager. If you are prompted for an administrator
  password or confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the device, and then double-click the device name.
  3. click Driver tab, then click on uninstall the driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also try to troubleshoot using the network troubleshooter in Windows 7 and make sure that the error message to follow the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Every single extension I have is broken. Uninstalling and reinstalling didn't work either. They say they will updated when Firefox is restarted, but I can't even open the preferences for each plugin.

  Does not work an extension of solitaire. Many of them say they'll be updated to Firefox is restarted. Apparently, some of them seem to work, but by clicking on the 'Préférences' button does not cause any response. I have Firefox 3.6.13. I tried to uninstall and then reinstall the extensions (Stumbleupon) but nothing is. I have to be re - install Firefox here?

  This can happen if one of the files which stores information about the extensions you installed is corrupted. The difficulty that see the section on extension files corrupt in the article Impossible to install add-ons (extensions and themes) .

• Realtek 8185 Driver Windows Update installation causes system crash

  Install the Realtek 8185 Extensible 802. 11b / g wireless listed device driver as optional in windows update in windows 7 ultimate 64 bit results BSOD and system becomes unable to boot (System Restore will fix it).

  I am writing this to see if it is a special situation with my system or if it's a widespread problem, the following driver Details.

  Camera works great with the default driver, so if someone is going to tell me do not install this driver and look for another who is not the issue. Problem is that this driver in Windows update will cause the crash (BSOD) and system does not start until the restoration of the system is used.

  System Specs:
  OS: Windows 7 RTM x 64 Ultimate (new installation)
  P: AMD X 3 720
  M: 4 GB DDR3
  VC: GTX 260
  MB: Gygabyte MA790XT-UD4P
  (Related to the problem) wireless adapter: Realtek 8185 Extensible 802. 11b / g Wireless Device

  Driver details:
  Realtek Semiconductor Corp. - network - Realtek 8185 Extensible 802. 11b / g Wireless Device

  Download size: 409 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Optional

  Software update of Realtek Semiconductor Corp. network released in September 2009

  More information:
  http://winqual.Microsoft.com/support/?DriverID=20298246

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  Hello

  You must go to Realtek and get the current driver, it works fine on my system. Do not do it just
  means that you're stuck in the loop, you're in and the pilot trying to update Windows Installer is a
  an old man just certified for Windows (MS is far behind the pilot certification and accreditation is not
  means that they work properly).

  Good luck.
  Rob - bicycle - Mark Twain said it is good.

• Error message "Windows Updates" Vista

  I want to use automatic updates with my Windows Vista operating system.  When I click on updates of Windows in an attempt to allow that I get the message "the page failed to load" suggestions?

  Try the following: -.

  Open search Vista Start Menu Bar and type: RUN

  Click OK

  Type the following lines, and after each one, click OK: -.

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  No guarantee

  You may need to run the commands as an administrator.

  Restart Vista loves to restart.

  TaurArian [MVP] 2005-2010 - Update Services

• Big problem with update Vista

  I write from my alternative system running the good old XP.  My system Vista Ultimate (a Pentium D 840 3.2 GHz with 4 GB of RAM) was download and try to install the latest updates.  After the installation, he said he would restart.  With the discontinuation of the screen came the message that it was installing 2 of 3 updates... more than 24 hours later, he always says he was installing updates so I stopped it.  Once I did I couldn't access is more Vista at all.  He is just cycled through the boot upward.  So I took out my Vista CD and decided to try to do a repair.  That didn't work so I did a clean load of Vista.  It loaded correctly, putting my old copy in a folder named Windows.old.  While I started to find all programs and drivers that I need to load Vista has been automatically download and installation of updates.  When he said it was installing the updates he wanted to restart.  BIG MISTAKE.  Now I'm at square one.  Vista does not load.  It passes right through the boot sequence.  What the hell is happening?

  Hello

  Sorry, it took this measure. Don't forget Council to disable the driver updates, as it worked well
  for me. Windows updates will tell me it is available and I then HIDE and fetch manually and
  usually, I do have the latest drivers so the certified one free was actually older. This
  procedure to keep the Windows updates on and not have to worry about an older driver
  loading.

  I always recommend this:

  Leave the Windows updates on and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Rob - bicycle - Mark Twain said it is good.

• How can I fix "diagcab" file Ext. my register 0 Error 80070002 x? I can't update Vista.

  How can I fix "diagcab" file Ext. my register 0 Error 80070002 x?  I can't update Vista.  It seems I have to redo a diagnostic firm or something.

  Thanks, Greg

  Run a full scan of CHKDSK and SFC...

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  CHKDSK C: /R

  and press the Enter key.

  We'll tell you that the disc is locked,

  and the CHKDSK runs the next time he started - press Y and restart.

  The CHKDSK command will take a few hours depending on the size of the disk, so be patient!

  Once executed, the command CHKDSK Windows should start normally (possibly after a second auto).

  Then, run the SFC.

  SFC - SFC System - Instructions

  Click Start > all programs > Accessories

  Right-click on the entry of the command line

  Select run as administrator and accept the UAC - elevated command prompt window prompt should appear.

  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key

  Wait for that analysis at the end - make a note of any error messages - and then restart.

  Copy the CBS.log file created on your desktop (you can not manipulate directly) can compress the copy and transfer it to your SkyDrive (http://skydrive.live.com ) and post a link to it so that I can take a look.

  Post a new MGADiag report with details of any error messages encountered.

• After July 2014 update Vista, correcting spelling does not work on Windows Mail from 2006.

  Original title: Vista update of July 2014

  After July 2014 Vista Update orthographic corrector does not work on Windows Mail from 2006. Click on the "Edit" button to correct a GIS spelled the word, the screen goes gray and stop Mail.  Uninstall Vista Security Updates (5 discount) on July 8 and the Explorer 9 Cumulative security update solves the problem. (Prove with this reinstallation and uninstallation twice)  Have not yet had time to verify that updates 6 is the cause of the problem.

  Updated Vista regularly since it was first released.  First time I met this specific problem.

  Would be grateful for any comments or advice.

  I have this to happen on occasion and fix it tool.
   
   
  Try to compact and repair the database with this tool.
  
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx
   
   
   
   

• Cannot download updates vista, #8024A 000 error pop up and unable to continue.

  tnt1inc

  Cannot download updates vista, #8024A 000 error pop up and unable to continue.

  Hello

  Looks like the files in the folder "Software Distribution" are damaged, try to rename the folder.

  step 1: open the 'Services '.
  > Click Start > type "Services.msc" > hit ENTER > search for "Windows Update" service > right-click on it and click on 'Stop' (if it is not already stopped).

  Step 2: rename the Catroot2 folder.
  > Open computer > folder "C:\windows" goto > search for "Software Distribution" folder > right click on it and click "Rename" (add ".old" to the end)

  Step 3: restart the "Windows Update" Service.

  Step 4: restart the computer.

  Step 5: check the Windows updates.

  Let me know if it worked. :-)

• Satellite A300-1IK - impossible to update Vista

  Hello

  I recently reset my Satellite A300 to its default values by using the utility HDDRecovery. Now, the OS is Vista Home Premium SP1, but I'm not able to update vista drivers or get the upgrade to SP2, so I was struck with my SP1 default.

  I tried installing updates with automatic update, or manually checking the updates under "Windows Update" options. I have achieved anything with the first method (planned updates begin at all), while with the second method when I click on the button "Search for updates", it tells me "impossible to verify new updates; CODE ERROR 80072EFE»
  So I tried to download the executable update packages microsoft official to their download area, but all fail to install.
  What am I supposed to do?

  Thanks in advance, Alessandro

  Hi caiusteblack,

  > So I tried to download the executable update packages microsoft official to their download area, but all fail to install.
  Pack update that you downloaded?

  Of way General if SP1 is already installed you can begin with the installation of SP2 for Vista but SP1 must be installed in the first place. SP2 is available for download on the official site of Microsoft (no Windows Update). Download SP2 and run the install and check what is happening.

• Satellite Pro A200: update Vista messup my wirleless adapter

  Help
  I updated vista Professional on a Satellite A200 the latest patch and everything worked well until that point.

  Now my driver Intel (r) PRO/Wireless 3945ABG Network does not work. It has the "!" in the Device Manager.
  I downloaded and install the latest driver from intel, deleted and reistalled the drivers and each time said vista the correct driver installed, but still the «!»

  Thank you for your suggestions fix the wireless adapter

  Hi Hannah

  Problem persists if restore you the system to an earlier time, before all these updates?

• Update Vista, run time

  Update Vista worked for three hours - still on 1 of 5!  How long is this process supposed to take?  Can I interrupt the process safely?

  Hello

  ·        What type of internet connection do you have?

  ·        You try to make the automatic updates or manual updates?

  Method 1:

  If it is still stuck on the installation of update page, thenrestart the computer and choose boot normally and check what is happening. If you enter Windows and not all updates have been installed, you can install the updates one at a time and see if one of them is having a problem. See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 2:

  So, everything has not updated, then try todownload and install the stand-alone package with updates from the Microsoft Download Center.

  (a) download updates from the Microsoft download Center:http://www.microsoft.com/downloads/en/default.aspx

  (b) enter the item in the field number search and download the same.

  Note: Before you install the updates, configure your computer in aclean boot State. Once you have finished installing the updates, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update Vista SP1 to SP2 stuck on 0% download

  I'm updating Vista SP1 to SP2. The update says "download updates 0%" complete & back no change. I tried to disable the security software. It did not work. I used the tool to update reset. This doesn't work anymore

  Free unlimited installation and compatibility support is available for the Windows Vista SP2 problems. [This free assistance was scheduled to end on August 30, 2010, but I suspect that the offer was extended for a few months.] Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft