Update Vista stuck on 4 installation 7 updates for 5 hours

Similar Questions

• Node simple database pre-installation checks running for 2 hours.

  Not having my first install Oracle EBS on a concert of 16 16 VM drivers, due to the lack of sufficient space on file system, I added a new 900 GB virtual drive and rose to /d01 with lots of reading permanent writing on a BONE 7 OEL.

  Failed to install previous pre-installation check relatively quickly (10 minutes or more), but this control of pre-installation worked for 2 hours now, with no updates.

  ---------------------------

  .........

  Mid-range host ping was successful

  command: / bin/ping - c 1 host - 1.skytap.example.

  PING host - 1.skytap.example (127.0.0.1) 56 (84) bytes of data.

  64 bytes of the host - 1.skytap.example (127.0.0.1): icmp_seq = 1 ttl = 64 time = 0.062 ms

  -Home - 1.skytap.example - ping statistics--

  1 packets transmitted, received 1, 0% packet loss, time 0ms s

  RTT min/avg/max/leg = 0.062/0.062/0.062/0.000 ms

  Mid-range host domain Ping was successful

  Check complete.

  Checks of preinstallation of database

  These controls may take a few minutes...

  --------------------------------------

  The computer is allocate mem and CPU for the gnome, java and the Xorg process, but I expect to see an update now.

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  Is there a log somewhere that will tell me if he actively done something or if it is stuck?

  Is there a protocol suitable for wiping system before you try a new installation of a new rest area?

  What is a 12.2 installation? If so, you should find the details on doing RapidWiz in $TMP //in the .log file - Rapid troubleshooting install for E-Business Suite version 12.2 (Doc ID 1378579.1)

  Thank you

  Hussein

• Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to the installation of Windows updates?

  3. do you have security software installed on your system?

  Method:

  Follow the indicated link and perform the steps and check if it helps fix the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  Let us know if it helps.

• Update Vista stuck on installing update 4 of 7 for 2 hours

  During a normal shutdown, I got the message updates were insalled (Vista Home Premimum).  For two hours, I was stuck on the installation of updagte 4 of 7.  How should I proceed.  Power off, to let him stay or what?  If I turn it off, which option to choose on a reboot?

  klh1955,
  If you are still having this problem, then normally choose the boot option and see if it will fill or load normally.  If you enter Windows and not all updates have been installed, you can install the updates one at a time and see if one of them is having a problem.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stuck at 99% installation of updates. Win 7 Ultimate for Windows 10

  Need help please, I am stcuk for like 3 hours or so, tried twice... stuck at 99% installation updated ready... Try to update my Windows 7 Ultimate for Windows 10... Thank you...

  Give it a little more hours and see if it progresses. If it does not, click Close, and then restart your computer.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Computer laptop Pavilion G6 with 8.1 window is stuck on the installation of updates

  Hi my old laptop Pavillion G6 of 12 months (which was the worst computer I've ever owned!) is stuck on an update. The screen shows the message "Keep your PC up to... this installation to update 1 of 2" for 12 hours (overnight).

  A little over 2 weeks ago he had a problem with the WiFi connection - which also seems to be associated with the Windows updates - I got this one and it has been fine since then. Started an automatic update last night and now he's stuck. Any ideas?

  Hi Jamame,

  Thanks for your post, I will do my best to help you!

  I see that your computer did an update for more than 12 hours and has not completed or seems to have improved.

  First of all you could cancel the update, restart the computer.  Then you would go The HP Support Assistant to search for updates or problems. Here is a document to help performance. Improve the performance of the system without adding memory (Windows 7). I would also like to launch the File Checker.  Using the File Checker system to restore the system files. Now repeat your update with her power.

  If you want more help, please can you give us the exact model of the G6 you and the operating system you are using. How can I find my model number or product number?

• How can I disable the automatic installation of updates for Vista?

  HP Pavilion dv2 laptop... Vista

  I use my phone sparingly & almost exclusively in public presentations.  I have recently (in response to a popup) changed the setting so that Windows updates are installed automatically.  Since then I have had 2 thoughts, because I don't want that Windows updates (reboots, etc.) could interfere with some presentation planned (or current).

  Where can I change this setting?

  Thank you

  Hello:

  The info on the link below should be of help to you.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Paul

• Installation of updates for Windows Vista error 80070490 message code

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Hey grown-sexy

  see if the below microsoft information arranges

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  If he did not correct it repost in the correct windows update forum below

  It comes to the installation of vista operating system instance

  Use the link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Windows Vista stuck on 'if please do not turn off or unplug your machine. Installing Update 1 of the 17... »

  My another Windows Vista machine has been slain on "if it please do not turn off or unplug your machine. Installation of update 1 of 17 "for 4 hours. I need to close because it's my phone and I travel NOW.

  How can I stop the update and close?

  http://support.Microsoft.com/kb/555375>

  It helps those answering questions if you provide:

  What version of windows (32-bit or 64-bit) and service pack level.
  you use what browser (exact version).
  What application or antivirus security suite is installed and your current subscription?
  What third-party firewall
  What anti-malware software can be installed.

  · What are the updates that you try to install on the system?

  If the update has failed then try these steps and check if that helps. I suggest you to let us know the number of KB updates.

  Step 1

  Uninstall the updates failed program and features, follow these steps

  a. open Control Panel from the start menu

  b. Select programs and features

  c. click View installed upgrading

  d. uninstall the update failed

  Step 2:

  Reset the component of windows update and then try to install updates, check if the problem is resolved.

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058>

  Step 3:

  Install the stand-alone package containing the updates. You can download the stand-alone version of the below link with number:http://www.microsoft.com/downloads/en/default.aspx> and check if the problem is resolved.

  For more information click on the link below.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• computer blocked the installation of updates for Vista Edition home premium

  I restart my computer (11 December 2009), and before it did, he said it was installing updates. He has been blocked for at least 12 hours of update 2 of 9. Is this normal? Is it possible to stop him with damage them the computer? I use Windows Vista Edition home premium and my computer is a Toshiba M305-S4019. I have just purchsed my computer in April 2009.

  Thanks in advance for your help.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• I get a repeated error on install Platform Update For Windows Vista (KB971644). Fails with the error code 80073AA2. Installation comes from Windows Update.

  Windows Update loops round and round constantly to not set up correctly, then restores the changes

  Do I need to install the System Update Readiness Tool KB 947821?

  Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.

  Given that this problem is after a fairly recent install of SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this=""> ).

  In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

  NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need assistance with the installation of 3 failures of updates for windows vista with error code 646

  I tried all day install the following updates:

  1 security Update for Microsoft Office Excel 2007 (973593 KB)
  2. security Update for Microsoft Office System 2007 (973704 KB)
  3. Update for Microsoft Office Word 2007 (974561 KB)

  Updates have been through to 4 am cst, but when I turned on my pc today, Windows Update showed that I needed to install updates 3 mentioned above. I tried all day to make install, but each attempt failed. I clicked the button 'Try Again' and always updates does not pass.

  I deleted the files that I no longer use of haven't used in a year or two. I also deleted some files that I have no use for out the files in the folder my documents. I even emptied my recycling bin to help clear up some disk deespace, still nothing.

  I tried the suggestions that are currently on the forum, but do not always help.

  When I went to manually download updates an error pops up saying "Package of Installation failed."

  Help, please. I need of new suggestions or something.

  I had to disable the "User Account Control" (UAC), which allows you to run as administrator in Vista.  After that I turned it off, all 4 of these updates installed and it doesn't require manual installation.   Follow these steps:

  In the case of Vista view:

  1.) go to start; Control Panel; "User accounts and family safety"; User accounts.
  2.) click on 'Enable user account control or disable' (last point on the page)
  3.) clear the checkbox "Use User Account Control (UAC) to help protect your computer" and click "OK."
  4.) restart the computer, and then run the installation of the system and they work.

  If you are in Classic view:

  1.) go to start; Control Panel; Security Center
  2 screen.) in the "Windows Security Center", go to the last item "User Account Control" and click the button to turn off.

  You can also see the security shield in your Start menu.  You can also access the UAC via this.

  After that the installation of the system have been updated, make sure that you go back and turn the UAC "" and then restart your computer so that unauthorized updates do not occur.   Always try this turn off if install doesn't work.

• How long does take to install updates for Windows Vista after a new installation?

  Hello

  I'm trying to fix an old computer that I had lying around the House. She has Windows Vista installed.

  Today, I performed a clean installation of Windows using the recovery partition to try to make things a little more zippy.

  I know that Windows Vista is released some time ago, so I know there will be lots of updates for me to install. My question is how long approximately would it take to install all updates and get the operating system? It's a very slow computer at first.

  Thank you

  Daniel9435

  Daniel

  There is no way of knowing.  It is dependent on the speed of your connection, your CPU speed, etc.  They can even not available altogether at the end of standard support for Vista time.

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)