Update Windows 7 screen, 'Check updates' blocked.

Similar Questions

• Windows Update is stuck on the screen check updates for more than an hour.

  Original title: Windows Update problems

  I just got a new update for Windows 7 and got all my drivers installed. However, Windows Update is stuck on the screen check updates for more than an hour. Everything works except that, and I don't know how to fix it. It has updated two things: the Windows Update Agent 7.6.7600.320 and update for Windows (KB958488). He continues to seek constantly and never find anything.

  Please leave for 5 or 6 hours and if he doesn't find anything:

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide details of any problem it reports as not fixed.

• Window could not check the update

  I bought a new laptop Toshiba Satellite A500/02J and install Windows 7, 64 bit.
  The problem is that when it's time set to automatic update of Windows 7, the message "window could not check the updated" comes top-code 8024402F - "window meeting unkown error."

  How can I fix?
  Thank you

  Jin

  This question is discussed:

  http://www.Vistax64.com/Vista-General/115708-Windows-Update-error-8024402f.html

  This is for Vista but can be also useful for Windows 7

• Windows can't check for updates 80244019 error code.

  I have a problem, the system is vista home basic. Windows can't check for updates 80244019 error code. I have read many of the forms and ran from bugs that I found from microsoft. Further investigation indicates the RPC and DCOM service Launcher are grayed out and cannot be started or stoped.   Registry settings look good for the RPC service.  The DCOM service depends on RPC service.  In the GUI at the same time say they are started but from the comand prompt, I run the command net start and neither one is registered as running.  Any help would be appreciated.

  Thank you

  Hello

  (1) did you make any changes before the show?

  See the link below:

  Method 1: The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2: Windows Update error 80070422, 80244019, or 8DDD0018

  http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

  Method 3: You can start the online virus scan and check.

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-remove-a-computer-virus

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if that helps.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• Windows update error: Windows cannot currently check the updates because the service is not running

  Original title: Windows Update No. Longer - Vista business functions

  Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".

  I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.

  Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.

  Thanks in advance,

  Hello

  1. you remember to make changes to the computer before this problem?

  2. what anti-virus software is installed on your computer?

  Follow these methods.

  Method 1: Anti-virus software may conflict with Windows Update.  You can temporary disable them and check the issue.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2: How to reset the Windows Update components?
   http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Method 3:  If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

  c. delete the log file, and then restart the computer and check the issue.

  Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:

  Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.

  I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).

  At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.

  Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program.  In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.

  At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!

  However, the update message that a new version would be dl before I could go any further. So I did it.

  When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.

  Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.

  Thank you!

• My automatic updates Windows Vista do not work? Error: Windows can't check for updates

  original title: My automatic Windows Vista updates do not work?

  My automatic updates Windows Vista do not work? There is no error code, it just says "Windows can't check for updates.

  I tried to use the fix from microsoft, it would join in the other responses, but it did not work.

  And have you tried resolution: method 2 in http://support.microsoft.com/kb/946414?

• Windows Vista cannot check the updates:

  Hello

  IM using vista and windows can't check for updates: i do not get the error codes then, how can I solve this problem
  Thank you
  Janet

  start by:

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Windows updates stuck on the Windows start screen.

  Windows Home screen is stuck it just keep going along in a loop, with message configuring updates 3 of 3, this started after attempting to upgrade Windows 7 to Windows 10 I can't

  out of it, had driven myself crazy trying fixit please if anyone has a solution to this problem

  Please share, he just may save my sanity.

  Windows Update Fixit utility:
  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Try the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  (The steps # 1 a, 1 b, 1 c, 1 d and 1e)

  Disable third-party firewalls.

  Also: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/win-7-updates-keep-repeating/12ecb219-c374-e011-8dfc-68b599b31bf5

  J W Stuart: http://www.pagestart.com

• Firefox opens with a window that says "Check to ensure the compatibility of Add-ons" then he opens always 2 tabs... one with my homepage and another that said congratulations, Firefox is updated. How can I prevent the it starts like that?

  Firefox opens with a window that says "Checking for compatibility for modules" then he opens always 2 tabs... one with my homepage and another that said congratulations, Firefox is in place

  Rename the files work perfect! Thank you

• I blocked an e-mail in Windows Live and checked bounce it back to the sender, it landed in my junk e-mail folder. He actually returned to the sender

  Blocked an email to WL and it landed in the junk e-mail folder

  I blocked an e-mail in Windows Live and checked bounce it back to the sender, it landed in my junk e-mail folder. Has he actually returned to the sender, it was VERY important that she do? Thank you

  Windows Live questions belong in the Forum http://windowslivehelp.com/

  You are the same person as "SouthernAurora"?  This ID posted the exact same question.

• How to write insert and update blocks about with an if

  Hai All
  
  How to write an insert and update block education about with in an if
  
  I had a condition Ie
  
  If the time is between 0630 and 1030
  
  
  then
  
  Insert into Daily_attend
  ----
  
  
  Update Daily_attend set
  
  -----
  
  Concerning
  
  Srikkanth.M

  There is nothing preventing you to do this:

  BEGIN
    INSERT INTO x (mycolumn) VALUES ('A');
  
    UPDATE x
    SET mycolumn = 'B'
    WHERE mycolumn = 'A';
  
    COMMIT;
  END;
  /
  

  other than the fact that he seems a bit inefficient. Yet once you try to do, and why, is not clear.

  Can you put an IF statement in there to choose one way or the other under certain conditions? Yes. But I wonder if what you
  are actually trying to do is to reinvent the MERGE statement.
  http://www.morganslibrary.org/reference/merge.html

• Completed critical Windows blue screen process or you quit

  Blue screen ' critical process you leave or repealed. ".

  Hello, for some reason, another a computer was awake from sleep, he went to a blue screen. There was a technical information at the bottom of the page read, STOP: 0x000000F4 (0 X 0000000000000003, 0XFFFFFA8003EDE060, 0XFFFFFA003EDE240, XFFFFF 8000C39EDB0). The number may be a bit off, after writing messy, but it must be identical. The screen will not disappear, even after 30 minutes. Is the BIOS or Windows 7 must be reinstalled or restored?

  Hello

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available from the OneDrive or other
  file -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  Adding files to your OneDrive
  http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

  A disk - sharing files and folders and change the permissions
  http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

  ZIP or download the content of the C:\Windows\minidump

  Use OneDrive to upload collected files

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) in fact
  delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
  memory and possibly check the connection/contacts on the hard drive. Memory could
  be the problem, so if you have more than 1 stick swap them in and out to see if the
  problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
  have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.

  Also check the wiring on the hard drive.

  =========================================================

  Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

  CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  CRITICAL_OBJECT_TERMINATION parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The Terminal object type: 0 x 3 : Process of 0 x 6 : Thread
  2	The endpoint object
  3	The name of the process image file
  4	Pointer to a string ASCII containing an explanatory message

  Cause

  Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant
  (also, Windows 7 and Windows 8).
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows blue screen of death (ASF) when I play Garrysmod

  Windows blue screen of death (ASF) when I play Garrysmod

  Hey,.

  When I started to play Garrysmod (GMod) as blue screen arrives (happened 2 twice now)...

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 2057

  More information about the problem:
  BCCode: 101
  BCP1: 0000000000000061
  BCP2: 0000000000000000
  BCP3: FFFFF880009E7180
  BCP4: 0000000000000001
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Operating system: Windows 7

  Graphics card: Nvidia Geforce 9800 Gt

  If you want something else, ask here.

  Help, please!

  Thank you

  Christopher Kelly

  CEO Christopher Kelly - ChrisJets432 - ChrisJets Corporation - Check http://cjcw.sm4.biz/ for updates, etc.

  Right, I found the problem, the card (s) has an addon called HDR source and what is the cause of the crash.
  For example on gm_construct that I never go on the plan, due to the fact it triggers it

• Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to open any PDF... y at - it a patch?

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  "numetro" wrote in message News: * e-mail address is removed from the privacy * .com...

  Adobe Acrobat is NOT COMPATIBLE with Windows Vista... it blocks any browser or operating system when I try to download or open any file PDF... y at - it a patch?

  When I try to open a PDF file in IE 7 or Firefox 3.6, or just on the desktop, I get a sign that says:

  "Program Compatibility Wizard".
  

  "This program has known compatibility issues - check online if the solutions are available on the Microsoft Web site. If we find solutions, Windows automatically displays a Web site that lists the steps, you can take. »

  "Program: . Acrobat Reader 7. Editor: "Adobe,location: C:\Program Files\Adobe\Acrobat 7.0\Reader\AcroRd32.exe.

  "Acrobat Reader 7 has a compatibility issue with this version of Windows. For an update compatible with this version of windows, contact Adobe. »

  "Search for solutions online - Run program - Cancel . "

  If I click on one of the 3 buttons listed above, the browser, it blocks or breaks down the entire operating system.

  Does anyone know of a patch for this... Adobe, what I find, has updated for Acrobat Reader, but they don't say if this is a patch for this problem of Vista incompatibility.

  I searched on the basis of knowledge of Microsoft and this forum and I can't find anything definitive on this question.

  I can not even download a PDF file, and still less open and looking at its content.

  Known fixes?

  Thank you

  NuMetro

  FAQ Adobe "Acrobat 7.0 and earlier versions do not support Windows Vista. Adobe does not plan to release updates to Acrobat 7.0 and earlier for Windows Vista compatibility. «You'll need to level of Acrobat 9 (or later) to ensure full compatibility with Vista and Win 7.»