Update Windows 8 suspended at 12 or 13%? Try this!

Update 2756872 Windows hangs at 13% (Windows 8)

 

 

Step 1: Start PC in Safe Mode

I hope this helps!

Tags: Notebooks

Similar Questions

  • After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

    After updating Windows 10 on my PC, when I try to update Adobe Muse, I get an error DF024. Help, please!

    Hello

    Please see the help document for troubleshooting with the installation logs: https://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

    Let us know if this helps!

  • Printer does not work. Update Windows drivers seem to be the cause of this.

    It is a recurring problem.  The printer stops working.  In the past, I tried to update the Windows driver, but it did not help.  I have uninstall the printer.  I reinstall the printer with my original disk, and everything works great... until this last time, I get the error BLUE SCREEN indicating the USB port that my printer is plugged (: f /) is a malfunction and stop for my protection.  The BLUE SCREEN telling me to check the updates, which there are 2 drivers for my printer, and I download them. Virus scanner, which entered its own; Defrag, which I did, and then run CHKDSK F, who said there is a problem running that.  Honestly, when the computer was working, I don't check what port he used.  Now it doesn't work, I checked the port and it is said USB001.  My computer was back in 2006 and the printer may around the same time.  I went through all the troubleshooting steps, until the uninstallation of a port.  I me am stopped there because 'port' was not clearly defined and I already have enough trouble with this computer, I didn't mess up (again) at all times.   Dell wants much more money to help and I can't understand without asking them to repeat the question several times and using a ton of minutes on my cell phone, and the updates come from Windows anyway.   Does anyone have advice?  I can't afford a new computer right now.  The BLUE SCREEN me freaks really out.  I would try to avoid those.

    In short (too late) when I download the printer driver updated from Windows, my printer stops working.  This last time, I got the BLUE SCREEN error that really me freaked out.  Any suggestions?

    Get in touch with the manufacturer of the printer...

  • WRT 310N worm. 2. cannot update Windows Vista and Norton 360 since I installed this router

    Hello world

    As the topic title says, since the installation of the router WRT 310N worm. 2 on my laptop, Windows Vista, and Norton 360 can not be changed - I continue to receive operation failed errors whenever I try to download the latest version of the software updates or antivirus. Generated error doesn't also have a HelpFile associated with it.

    I went to the admin settings, but since I'm pretty new to routers and wireless technology in general, I'm a little busy with what we have to try so I thought I'd come here and ask the experts.

    Would be very happy for any help!

    Thank you very much
    John

    Thank you, great_white. I will try that first thing when I get home!

    I'll keep you and all readers display updated on what I find.

    Kind regards

    John

  • canoe to update windows vistA, C8000408, need help error code on this

    Cannot update error code windows vista get C8000408, what can I do?

    Hello

    ·        You did changes to the computer before the show?

    ·        What is the complete error message you get?

    Method 1: Run the SFC scan and check if system files are intact:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 2: I suggest that you put the computer to boot and check if you can install the updates:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

    You can also check out the link:

    What are the error codes and how can I use them?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-error-codes-and-how-can-I-use-them

    Reference: The problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  • Error code 0 x 80040609 when you try to update Windows

    Original title: Error Code 0 x 80040609, what to do now?

    It's the 2nd or 3rd time I went through it, each of the error codes w / different when you try to update.  What should I do now?

    Hi lulubell69,

    1 Windows operating system you are using?

    2. the Windows updates you trying to install?

    3. have you tried to install the updates manually?

    4. where exactly you try this errors?

    Method 1:

    You can read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 2:

    a. you can try to download and install the stand-alone package of the update from the Microsoft Download center.

    http://www.Microsoft.com/downloads/en/default.aspx

    b. Enter the KB number for the update and press ENTER.

    c. double-click on the downloaded file.

    d. you can either click Run to start the installation or you can click on save and save it on the desktop and run the installation once the update is completely downloaded.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error 80070103 updates Windows installing drivers for laptop HP keeps repeating

    I have a HP dv7 laptop with Win7 SP1 (64-bit), 6 GB of RAM and all updates.

    Recently, I received another set of 3 that are specific to the hardware of my HP laptop.  I checked, and 2 other Microsoft and proceeds to their installation.  2 Microsoft installed OK, but the 3 which are for hardware of the laptop, failed.  (Update the Intel driver for another liaison WiFi, Intel - hardware and Realtek network card) The screenshot is (the center of the 3 lines):

    I right click each of the 3 defective items and screenshots are:

    I then right click on the line with the text: [Code 80070103 "Get help with this error"]

    and got this message for all 3 screens.  I enclose you one of them, because they are the same:

    A few hours later same updates Windows 3 reappears and I installed them again, this time stopping at the antivirus and anti-malware programs.  There was no difference - I had the same failed installation attempts.

    I would very appreciate advice, suggestions or recommendations on how to make these updates of Windows installed properly and successfully.

    Thanking you in advance.

    R.Tan

    You should be happy that they're fail because generally, it is never a good idea to accept installation hardware (audio, video, network), drivers offered by Windows Update.

    If you look on this error page:

    https://support.Microsoft.com/en-us/help/10164/i-got-an-error-code-from-Windows-Update

    It is said:

    If you receive Windows Update error 0 x 80070103 while installing updates, you might be trying to install a driver is already installed on your computer or a driver that might be less compatible that you have already installed.

    Microsoft does not know what are the best drivers for your system and you should only get updated hardware driver of your WWW site of system manufacturers and only when you know that the update may solve a particular problem.

    There are many topics where people blindly install all the updates that are available from MS, then the find something on their system which suddenly ceased to behave (audio, video, network).

    If you see these hardware driver update offered by Windows Update, that is better right click and hide them so never see again you them.

    You can read this topic where I described how to keep MS you offer hardware driver updates in the first place:

    Prevent the driver from Windows Update updates

  • Installation of updates Windows comes to approximately 96% complete, then said: "failed to update Windows, restore configuration changes.

    I just bought an Acer Aspire 5600U all-in-one computer. When attempting to install Windows updates, sometimes about 96% complete, then said: "failed to update Windows, restore configuration changes. How to solve this problem?

    Original title: Windows updates

    Hello

    Please, try to reset components Windows Update as mentioned here and see if this helps:
    Hope this helps, good luck :)

  • Service Acquisition of Image Windows (WIA) suspended at startup. Responding server {81ED811 A1F4E726-8CF1 - 11 d 1-BF92-00600} is not registered with DCOM within the required time.

    Since early April 2010, my computer started to shut down immediately after starting, or at a time later. A lot of system errors and other events have been reported in the error log, which much of this: "the MMTP service failed to start due to the error - the following system could not find the specified file - after 31/2 months, I abandoned this fixation and F11 to restart or reload the system to the original system; Have updated and 135 items updated, installed IE8, WinXP Pro + SP3 and finally my HP Laser Jet printer 5 p. Try to strt the computer a few hours later, but it stops immediately after, within 2-3 seconds; Repeat this several times. Unplugged the printer, the computer began; The error showd 2 journal items, repeated several times. i.e.

    (1) the service Acquisition of Image Windows (WIA) suspended at startup.                                                  (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM ala required timeout.  Can someone help please? I have to go into msconfig and other? I'm tired & patience thereby and the help that I received from the MS Tech Support.

    Help, please! Thank you! HeinrichDS

    Thanks "nass 1" for your support, I will follow Palouk recommendations to update the drivers for the HP product and hope it will be OK.

    I appreciate your help, HeinrichDS

    HeinrichDS

  • Firefox runs very slowly after updating Windows 10

    Saturday, December 12, 10 Windows spent an age of update itself, with several reboots. Since then, the navigation is horribly slow with Firefox, although my internet connection is always very well (fast my Smartphone using Microsoft Edge). I have two PCs, and both seem to have been affected in the same way. Using the Task Manager, I see that Firefox uses a lot of CPU most of the time - often more than 50%. Even typing and scrolling are very slow, not just downloading.
    I disabled all my add-ins and plug-ins, run in safe mode, rebooted and reinstalled Firefox without result. So far, I'd say that Firefox is the fastest browser. I think that Firefox updated itself 42.0 version a few days, so I have a suspect that this slowdown has occurred just after a Windows Update.

    Update: Windows update itself again today and, like magic, Firefox is again well. So problem solved.

  • iCloud cannot sync contacts after 10 updated windows kb3176495 - how to fix?

    iCloud cannot sync after 10 updated windows kb3176495 - how to fix?

    Stop synchronization. Wait a few minutes, then recheck the timing.

    Have you tried the signature to iCloud and then reconnect?

  • I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on the sites with lots of images like Facebook, etc.

    Hello, I am writing because I have a few problems with my favorite browser after update to 8.1 Windows. Here are some details. I've updated Windows 8.0 Windows 8.1, since Firefox run a bit oddly. In particular, when on sites with lots of images like Facebook. It's as if there is some sort of effect of Flikr between the office and the images, as well as between the images and the browser (a bit like old flikering of 16-bit video games). It's not too bad, but it's a question. I tried to reset firefox and restart the computer. I have not tried a repair, and I haven't done an uninstall.

    Hello, disable hardware acceleration in firefox should a restart of the application is taken into account. have you tried that too?

    Please also see if there is an available update your graphics drivers ...

  • After the 24 Firefox update, Windows 7 64-bit breaks on reboot. The network in the taskbar icon is not ready (blue circle stopped).

    After 24 of Firefox update, Windows 7 breaks after the reboot. The network in the taskbar icon is not ready (blue circle on the wireless network icon). But I can't do much. I can't open the network and sharing Center (never opened). Even the Task Manager hangs when I click to show processes from all users. I have to do a system restore for a network working again. I never even launched Firefox.

    Wow... I finally have the solution. Windows updates have been applied at the same time I updated Firefox. Bluetooth driver is what broke (which is part of the Centrino wireless). I ended up installing the latest driver from Intel, Windows Update, and then update Firefox... and all is well.

    I thank very you much for all your help. Take care.

  • When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

    When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
    Installation package. A program required for this install to complete could not be run. "Help, please.

    Hello..

    Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC

  • Can I update windows 10 on Sprout?

    If I update windows 10, can I also use sprout function? (Scan, projector, sprout apps, etc.).
    No probpem?

    I agree with ray1204 on this: HP must assess and update or do say us that it is impossible.

    I have not run Windows 10 on Sprout; However, I've been running on a laptop, and I've done it since the Insider program began.  I'm now up to build 10130.  I would not risk running Windows 10 on Sprout, so if someone else did, I'm interested.

    Windows 10 previews in stability and utilization have improved, but the user interface is different in Windows 8.  Windows 8 has a desk and a splash screen that seem quite distinct.  Windows 10 looks like a desktop and applications, the functions file, etc. appear on a screen separated when you click on the Windows button.  Which is kinda the same, but now modern applications and heritage applications all play together.  The store and the browser are new and very different, etc.

    Shoot, we all discovered, is his own strange beast.  The use of the desktop screen and start with the germination environment is quite strange.  Manual of the developer makes more mysterious, in my opinion.

    I think that HP has got to do some work on Windows 10 and probably change Sprout.  Which may not happen until the release of the "final" Windows 10.

    Patience is my suggestion.

Maybe you are looking for