Update Windows XP Pro Dell D830
the Windows update website site has encountered a problem and cannot display the page you are trying to view
Just a clean installed because I had all sorts of problems with Windows Update.
Service Pack 3 is responsible and Office 2010
MSE is responsible and does its updates.
Cannot use Windows Update at all - the main reason for doing a clean install.
Any ideas?
I had a stable internet connection and only after manual installation of dozens of updates, I've finally fixed. It's obviously one or more updates that cause this problem as there are dozens of people who have the same problem.
Tags: Windows
Similar Questions
-
Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.
Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?
Hello
Check your level of service current pack...
- Hold down the Windows (between Ctrl and Alt) key and press Pause break
- Examine what is listed in the system: section
If there is no service pack designated first level you must download SP2 from...
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28
.. .and then run the downloaded program to install SP2.
Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24
For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.
So try and get up-to-date with the Windows updates.
Tricky
-
Update Windows xp pro Microsoft web site and keep on getting a "error #"0x8024400A".» Impossible to evaluate the microsoft web site.
o solve this problem, use one of the following methods. Method 1: Download and install the Windows Update Agent click here to show or hide the way to determine if you are running 32-bit or a 64-bit Windows edition
To find out if it's a 32-bit version or 64-bit, open system information (Msinfo32.exe). Then check the value for the system Type item. To do this, follow these steps:
- Click Startand then click run.Collapse this includes this image
- Type msinfo32.exe, and then click OK or press ENTER.Collapse this includes this image
- In system information, review the value for the element Type.
- For 32-bit editions of Windows, the System Type value is x 86-based PC.
- For 64-bit Windows editions, the System Type value is x 64-based PC.
Collapse this includes this image
The following files are available for download from the Microsoft Download Center:
For a computer x 86
Collapse this includes this imageFor a computer x 64
Collapse this includes this imageFor an Itanium computer
Collapse this includes this imageFor more information about how to download the latest version of the Windows Update Agent, click on the number below to view the article in the Microsoft Knowledge Base.
- Click Startand then click run.
-
Update Windows 7 pro (10 users) network January 1, 2013.
Now, for more than 4 users connect an access across the network apps stop apparently.
Any thoughts?
Hello
Your question is beyond the scope of these forums. Please ask your question in the following forum.
Windows 7 networking:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
Concerning
-
Cannot update Windows XP Pro on a reinstall.
While making a reinstallation of Windows XP Pro SP2 on a Dell 4600, now I get error 0 x 80240036 and "site has encountered a problem and cannot display the page you are trying to display." This has been a repeated problem today. I'm at a standstill. Any advice on how to proceed would be appreciated.
I can post only what others have tried and had some success with.
UTC/GMT is 22:32 Friday, October 19, 2012
-
I bought a new Dell i3847 and it has Windows 7 Pro 64 bit installed at the factory on it.
I wanted to make a complete backup of the system, but the Dell Backup and Recovery software does not allow me to make a backup of the system. In addition, I was unable to create a system recovery disk using Dell backup and restore.
I can't use the drive system recovery expected Dell because it clearly states Windows 8.1
(1) why is a Win 8.1 drive included with a Win 7 Pro 64 bit system?
(2) what is the problem with Dell backup and recovery that she:
(a) cannot create a recovery disc factory
(b) allow me to create a backup system so I can go back to the factory State
Help!
It has been 2.5 hours and it is still "initialize disk" to create a recovery of the plant. It usually somewhere fails during initialization or in writing. Spend hours for each failed attempt to create a factory recovery disc is NOT GOOD!
The factory restore disk was finally created.
Dell is now a person pays create a backup system and the user must download a update to do so.
Microsoft has a tool to create a system image and make a recovery / restore disc which is free.
So, I used DBaR do restore disk by the factory.
However, to make a system image and a recovery / restore for that, I used windows 7 built in software.
-
Update Windows 8 pro 8.1 pro - product key/activation required?
I have a dell latitude E5530 it came preinstalled and active with windows 8 pro. I get guests to update to 8.1 and indeed when I go to store the link is available. However, I want to know if I need the product key for this upgrade? Will I need to reactivate after upgrade? If so how can I get the current installation product key? The upgrade will also default 8.1pro?
Thanks for your help, I know that these issues are pretty basic but I can't seem to find the answers in the son and I saw the charges based on complaints from upgrade so I'm trying to be careful.
The product key for the 8.0, you already is built into the system (it was on stickers on the laptops, but now it is embedded in the BIOS of the motherboard).
The 8.1 update is a service pack, so it won't change your product key or activation, and no new key is required. It's just a set of updates.
-
Updates Windows XP Pro will not work!
Using Windows XP Pro sp3 IE8, I can not connect to Update from MS - start a program Microsoft Update, as well as IE or open Microsoft uptate tools; I get Page cannot be displayed. Diag is nothing. IE8 seems to work very well, I can get to all other web pages.
Sorry, it has not helped. I also tried the fix for Mr. were noted at KB 971058
I did however download download the file TDSSKiller.zip from http://support.kaspersky.com/downloads/utils/tdsskiller.zip
And that has worked very well all missing issues updated works very well.
-
I get this error 0x80072EE7 number whenever I try to update Windows xp pro.
I reinstalled all Windows xp pro now. I downloaded all the updates from the Microsoft Update site and it worked well. Then I install EXplorer 8, and now this error is all I get.
I think we should explore who the problem. Am I the only one?Hi MaddJeff,
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the Windows XP community.
Please visit the link below to find a community that will support what ask you:
Windows XP user group: http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx
Hope this information is useful.
Let me know if it worked.
All the best!
Thanks and greetings
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
cannot update Windows XP Pro onlline more
Working on a project to update Windows XP to Windows Vista, and then to Windows 7
This way users keeping all of their parameters of programs and associated files. When I go on the web site for updates and click on 'EXpress', I get the following"
The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024402F.]
I tried all suggestion to revise the XP, but none seems not to work. The reason why I try to get updates for XP, it's when I try to put upgraded to Vista, I get the error Windows cannot update the boot configuration. On a naked boness implemented, just the Win XP Pro without programs or updates, I don't get the error message. Receive the error only on Win XP facilities with dates. Need help on this one.
Thanks in advance for your help.
the computer belongs to [my] employer is in a test environment
It is a specific consumer support forum. You will find appropriate support it in this forum-online http://social.technet.microsoft.com/Forums/en/itproxpsp/threads Pro
Good luck!
-
Impossible to update Windows XP Pro SP3 x 32
When I try to update W XP Pro I now have a message asking "I want to install this program?" with two buttons, "Install" & "do not install". The program name is "Microsoft Update". By clicking on buttons causes the button appear depressed but is not coming back 'out' and everything freezes for some time before another message saying there was a problem with the web page then it repeats once again. Center of Microsoft Fixit says it has solved the problem, but it still does not work. The first message box only began to appear last week, already the update just went forward without any problem since I had XP (since its release). I've tried many 'cure', but nothing seems to work. I would really appreciate some help with what I want to keep everything up-to-date. Thank you for your help.
Hi chatrick,
Thanks for the postyou don't have to search for them :)You have to type these commands on the command promptStep 1.1. go to start > run > cmdtype and press on enter each command line:net stop cryptsvcRen %systemroot%\System32\Catroot2 oldcatroot2net start cryptsvcoutputStep 2.2. rename the folder c:\Windows\SoftwareDistributiongo to start > run > cmdtype and press on enter each command line:Net stop wuauservCD %SystemRoot%\System32Ren C:\Windows\SoftwareDistribution SoftwareDistribution.oldNet start wuauservoutputthen try again to install updatesThus, you need to reset IEOpen Internet Explore go to tools > internet options > Advanced tab > reset >redo the updates.See you soon!Makoi -
I installed windows xp pro with service pack 3. I have an update that does not install (security KB2506212)
MS11-024: Description of the update of security for Windows Fax Cover Page Editor MFC components: April 12, 2011
http://support.Microsoft.com/kb/2506212Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
For more information about how to contact your local Microsoft subsidiary for support questions with security updates, visit the Microsoft International Support Website:
http://support.Microsoft.com/common/international.aspx?rdpath=4 (http://support.microsoft.com/common/international.aspx?rdpath=4)North American customers can also obtain instant access to unlimited free support by email or unlimited individual chat by visiting the following Microsoft Website:
http://support.Microsoft.com/OAS/default.aspx?&PRID=7552 (http://support.microsoft.com/oas/default.aspx?&prid=7552)For enterprise customers, support for security updates is available through your usual support contacts.
J W Stuart: http://www.pagestart.com
-
Fresh install of Windows 7 Pro on a HP desktop computer. Won't updates other than 14 updates which apparently took place during installation.
Have you tried the automatic scheduled updates - nothing happens. Have you tried manual "Check for updates"-finally translated by error code 80072EE2. Dozens of attempts after restart every time - same result, sometimes with a different error code. Goal is to have a working, Windows 7, NOT of Windows 10. Help, please.
Try to use this to reset the update system is very good,.
Use Option 2 on the list after right click and select run as administrator
https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc
Download in your downloads folder
Right-click and select extract all in the downloads folder.
Then right-click on ResetWUEng and select run as administrator
Follow the rest of the guides messages
Press any key to continue
Type 2 for this Option on the list and the Enter key to reset the update services...
Press y for Yes and then the Enter key I think twice
After that that he completed
Type 15 for this option and the Enter key to restart the machine.
Must they will restart in 60 seconds will save your work... Press a key to continue.
After reboot, go to windows updates and manually check the updates shouldn't take a few minutes.
You might look into this it's the new way to update after a clean install.
There are essentially 3 updates necessary for a clean installation of windows that you have updated until April 2016
KB3020369 & KB3172605 and KB3125574 that can all be downloaded from the catalog of $ M using internet explore
http://catalog.update.Microsoft.com/v7/site/install.aspx
To manually install you will need to ensure that the built in windows update service is stopped, and first disabled or it will conflict with the installers of stand alone.
-
Windows 8 Pro - Dell V715w AIO printer problems
My Dell V715w AIO printer worked well in Window 7 64 bit as well as 64-bit Windows 8 Preview of consumer.
Why it is no longer supported under window 8 Pro?Workaround solution-Run Setup.exe in the folder of Dell which excerpts from Installer (C:\DELL\drivers\V715w) using "Troubleshoot compatibility".Choose: "troubleshooting program"-> "the program worked in an earlier version of Windows"-> "Windows 7" -
Cannot update Windows 8 Pro via the store or the control panel
I have all the updates that are installed, but I can't just update to Windows 8. 1. I got the notification in the store and then he said I had to install the latest updates I did. Unfortunately, after installing the updates notification of the store has disappeared and there is no way that I can find an update and I really want it to be in harmony with my Windows Phone. In addition, my edition is Windows 8 Pro, at least that's what say my properties. Please help :)
Hello
I suggest you to reset Windows Update components and see if that helps.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-usNote: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.
See also the link: the problems with installing updates
http://Windows.Microsoft.com/en-in/Windows-8/troubleshoot-problems-installing-updatesI hope this helps! Let us know if you have other problems with Windows in the future.
Maybe you are looking for
-
I need to access my "collected addresses", but when I open the address book, it shows my "Personalbook', which is 'empty.How to change my "address book collected?
-
Problem with the context menu after the last update
After update of Firefox, the menu is with orders much more that before (Play, Pause, Mute etc), most of them out of context ("Open link in a new tab" when there is no link) and none of them works.
-
My computer sayinDIRECTOR PLAYER ERROR...
REQUIRES RECORDS XTRA XTRA (TEXT)... REQUIRES (FLASH ANIMATION) IN XTRA FOLDERS... REQUIRES (POLICE) IN XTRA FOLDERS
-
Error codes: 646 & dt000 (cannot install updates)
I get messages to install updates (11 updates). The installation fails continually. I have done everything including turning off my Kaspersky Anti-virus protection during updates thinking that it was inhibiting the installation of update, but it do
-
How to open the cutting tool in Vista (program where/what)?
I do not see in the accessories or any where. Search returns no results.