Update Windows xp pro

Similar Questions

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• updateing windows xp pro. Receiver "0X8024400A ERROR No. Can't access the site microsoft web.

  Update Windows xp pro Microsoft web site and keep on getting a "error #"0x8024400A".» Impossible to evaluate the microsoft web site.

  o solve this problem, use one of the following methods. Method 1: Download and install the Windows Update Agent click here to show or hide the way to determine if you are running 32-bit or a 64-bit Windows edition

  To find out if it's a 32-bit version or 64-bit, open system information (Msinfo32.exe). Then check the value for the system Type item. To do this, follow these steps:

  1. Click Startand then click run.
     Collapse this includes this image

     

  2. Type msinfo32.exe, and then click OK or press ENTER.
     Collapse this includes this image

     

  3. In system information, review the value for the element Type.
     • For 32-bit editions of Windows, the System Type value is x 86-based PC.
     • For 64-bit Windows editions, the System Type value is x 64-based PC.
     Collapse this includes this image

     

  The following files are available for download from the Microsoft Download Center:

  For a computer x 86

  Collapse this includes this image

  

  Download the windowsupdateagent30 - x 86 .exe package now.

  For a computer x 64

  Collapse this includes this image

  

  Download the windowsupdateagent30 - x 64 .exe package now.

  For an Itanium computer

  Collapse this includes this image

  

  Download the windowsupdateagent30 - ia64.exe now.

  For more information about how to download the latest version of the Windows Update Agent, click on the number below to view the article in the Microsoft Knowledge Base.

• Update Windows 7 pro (10 users) network January 1, 2013. Now, for more than 4 users connect an access across the network apps stop apparently. Any thoughts?

  Update Windows 7 pro (10 users) network January 1, 2013.

  Now, for more than 4 users connect an access across the network apps stop apparently.

  Any thoughts?

  Hello

  Your question is beyond the scope of these forums. Please ask your question in the following forum.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Concerning

• Updates Windows XP Pro will not work!

  Using Windows XP Pro sp3 IE8, I can not connect to Update from MS - start a program Microsoft Update, as well as IE or open Microsoft uptate tools; I get Page cannot be displayed. Diag is nothing. IE8 seems to work very well, I can get to all other web pages.

  Sorry, it has not helped. I also tried the fix for Mr. were noted at KB 971058

  I did however download download the file TDSSKiller.zip from http://support.kaspersky.com/downloads/utils/tdsskiller.zip

  And that has worked very well all missing issues updated works very well.

• I get this error 0x80072EE7 number whenever I try to update Windows xp pro.

  I reinstalled all Windows xp pro now. I downloaded all the updates from the Microsoft Update site and it worked well. Then I install EXplorer 8, and now this error is all I get.
  I think we should explore who the problem. Am I the only one?

  Hi MaddJeff,

   

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the Windows XP community.

  Please visit the link below to find a community that will support what ask you:

  Windows XP user group: http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx  

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot update Windows XP Pro on a reinstall.

  While making a reinstallation of Windows XP Pro SP2 on a Dell 4600, now I get error 0 x 80240036 and "site has encountered a problem and cannot display the page you are trying to display."  This has been a repeated problem today.    I'm at a standstill.  Any advice on how to proceed would be appreciated.

  I can post only what others have tried and had some success with.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-update-fails-with-error-code-0x80240036/abfc39c2-DA23-43df-bfff-71afcb1dff0f

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-8024400a/ae7ea803-9cd7-4770-a8fe-c886b0e4862f >>

  UTC/GMT is 22:32 Friday, October 19, 2012

• cannot update Windows XP Pro onlline more

  Working on a project to update Windows XP to Windows Vista, and then to Windows 7

  This way users keeping all of their parameters of programs and associated files. When I go on the web site for updates and click on 'EXpress', I get the following"

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  [Error number: 0x8024402F.]

  I tried all suggestion to revise the XP, but none seems not to work. The reason why I try to get updates for XP, it's when I try to put upgraded to Vista, I get the error Windows cannot update the boot configuration. On a naked boness implemented, just the Win XP Pro without programs or updates, I don't get the error message. Receive the error only on Win XP facilities with dates. Need help on this one.

  Thanks in advance for your help.

  the computer belongs to [my] employer is in a test environment

  It is a specific consumer support forum. You will find appropriate support it in this forum-online http://social.technet.microsoft.com/Forums/en/itproxpsp/threads Pro

  Good luck!

• Impossible to update Windows XP Pro SP3 x 32

  When I try to update W XP Pro I now have a message asking "I want to install this program?" with two buttons, "Install" & "do not install". The program name is "Microsoft Update". By clicking on buttons causes the button appear depressed but is not coming back 'out' and everything freezes for some time before another message saying there was a problem with the web page then it repeats once again. Center of Microsoft Fixit says it has solved the problem, but it still does not work. The first message box only began to appear last week, already the update just went forward without any problem since I had XP (since its release). I've tried many 'cure', but nothing seems to work. I would really appreciate some help with what I want to keep everything up-to-date. Thank you for your help.

  Hi chatrick,

  Thanks for the post
  you don't have to search for them :)
  You have to type these commands on the command prompt
  Step 1.
  1. go to start > run > cmd

  type and press on enter each command line:

  net stop cryptsvc

  Ren %systemroot%\System32\Catroot2 oldcatroot2

  net start cryptsvc

  output

  Step 2.

  2. rename the folder c:\Windows\SoftwareDistribution

  go to start > run > cmd

  type and press on enter each command line:

  Net stop wuauserv

  CD %SystemRoot%\System32

  Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

  Net start wuauserv

  output

  then try again to install updates

  Thus, you need to reset IE

  Open Internet Explore go to tools > internet options > Advanced tab > reset >

  redo the updates.
  See you soon!
  Makoi

• Update Windows 7 Pro

  Fresh install of Windows 7 Pro on a HP desktop computer.  Won't updates other than 14 updates which apparently took place during installation.

  Have you tried the automatic scheduled updates - nothing happens.  Have you tried manual "Check for updates"-finally translated by error code 80072EE2.  Dozens of attempts after restart every time - same result, sometimes with a different error code.  Goal is to have a working, Windows 7, NOT of Windows 10.  Help, please.

  Try to use this to reset the update system is very good,.

  Use Option 2 on the list after right click and select run as administrator

  https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc

  Download in your downloads folder

  Right-click and select extract all in the downloads folder.

  Then right-click on ResetWUEng and select run as administrator

  Follow the rest of the guides messages

  Press any key to continue

  Type 2 for this Option on the list and the Enter key to reset the update services...

  Press y for Yes and then the Enter key I think twice

  After that that he completed

  Type 15 for this option and the Enter key to restart the machine.

  Must they will restart in 60 seconds will save your work... Press a key to continue.

  After reboot, go to windows updates and manually check the updates shouldn't take a few minutes.

  

  You might look into this it's the new way to update after a clean install.

  There are essentially 3 updates necessary for a clean installation of windows that you have updated until April 2016

  KB3020369 & KB3172605 and KB3125574 that can all be downloaded from the catalog of $ M using internet explore

  http://catalog.update.Microsoft.com/v7/site/install.aspx

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  To manually install you will need to ensure that the built in windows update service is stopped, and first disabled or it will conflict with the installers of stand alone.

  

• Update Windows 8 pro 8.1 pro - product key/activation required?

  I have a dell latitude E5530 it came preinstalled and active with windows 8 pro. I get guests to update to 8.1 and indeed when I go to store the link is available. However, I want to know if I need the product key for this upgrade? Will I need to reactivate after upgrade? If so how can I get the current installation product key? The upgrade will also default 8.1pro?

  Thanks for your help, I know that these issues are pretty basic but I can't seem to find the answers in the son and I saw the charges based on complaints from upgrade so I'm trying to be careful.

  The product key for the 8.0, you already is built into the system (it was on stickers on the laptops, but now it is embedded in the BIOS of the motherboard).

  The 8.1 update is a service pack, so it won't change your product key or activation, and no new key is required.  It's just a set of updates.

• Cannot update Windows 8 Pro via the store or the control panel

  I have all the updates that are installed, but I can't just update to Windows 8. 1. I got the notification in the store and then he said I had to install the latest updates I did. Unfortunately, after installing the updates notification of the store has disappeared and there is no way that I can find an update and I really want it to be in harmony with my Windows Phone. In addition, my edition is Windows 8 Pro, at least that's what say my properties. Please help :)

  Hello

  I suggest you to reset Windows Update components and see if that helps.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/en-us

  Note: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.
  
  See also the link: the problems with installing updates
  http://Windows.Microsoft.com/en-in/Windows-8/troubleshoot-problems-installing-updates

  I hope this helps! Let us know if you have other problems with Windows in the future.

• HP 355 G2: update Windows 7 Pro for Windows 8 Pro

  We are a charitable organization of small learning supporting 3 other charitable organizations who were lucky enough to get funds to buy laptop computers.  After buying 12 we seem unable to talk to someone at the supplier or the HP that can solve a very simple problem!  The laptops have the system operating Windows 7 Pro but included in the box is a Windows Pro 8.1 operating system and it seems that you can not pass directly from Windows 7 to Windows 8.1 and get a drive of Windows 8 for each of 12 laptops is impossible.  The provider does not have the technical know-how (even if a technology company!) and HP will not talk on the phone a number as large as 12!  I'm still trying to solve this problem after 4 weeks.  I do not think that we will buy HP new equipment!

  Hello:

  While I do not work for or represent HP, W8.1 OEM disk Pro comes with your laptop is only for a clean install of Windows 8.1.

  It is not intended nor permitted to be used as an upgrade disc.

  You cannot spend W7 to W8.1 and keep the existing programs with this disc.

  If you want to install W8.1, you need to boot from that disk and follow the instructions on the screen to do a custom (clean) installation of W8.1.

  This disc is a full installation disc and product key OEM of W8.1 in the BIOS of your PC will work for a clean install of W8.1 OEM.

  Your laptop came with W7 Pro installed through W8.1 Pro downgrade rights.

  Make sure that you create a recovery W7 media for each cell that you plan to install W8.1 on because you will not be able to reinstall W7 without a license key, if you decide you want to come back on W7.

  The HP Recovery Manager program to create the recovery media before installing Windows 8.1.

• Need to update Windows Vista Pro to Windows 7 or 8, and MS Office 2007 version the most recent which products do need me?

  Hello

  Hope someone here might be able to help. Running Windows Vista Ultimate Pro OS but realize I have to make the trip up to 7 or 8.1. Can someone tell me how to do this (i.e. should I get Windows 7, then update to 8.1, or can simply go directly from Vista to 8.1)?  I'm hoping to minimize the costs that we are on a bit of a fixed income here. Can I use upgrades or what I must have full OS to move?

  On the front of MS Office, currently sports Office 2007, but desperately need to move until the most recent is and again, this can be done cheaply? I mean can I pay at a discounted price on eBay or Amazon or I have to go directly to the shop of MS to ensure an authentic copy (but * frown * full price)?

  It's been rough, the last 4 years, but I think that things are finally looking a bit and wanted to get new systems / software in place while I still had the chance. Don't want to be caught in the position where Microsoft continues the upgrade / support versions that I run, it's a kind of scary place, unless it is on an old / computer test, but not my direct computer to use computers all day.

  Any assistance with this will be appreciated. Thank you all and have a great day!

  Hello

  Nothing can 'do with it' If you want legal software.

  What, whether it's "buyer beware".

  It's your choice where you buy your software since.

  With Windows 7 Microsoft no longer sells, so you use Amazon, etc.

  There is no way to upgrade Vista to 8.1

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  ___________________________

  Do the following before upgrade you to Windows 8.1.

  Check if the manufacturer of your computer/laptop has Windows 8 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  :

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@

  Ago free Office Suites: OpenOffice and free.

  If you want to use Microsoft Office, you need to decide on an operating system first to check if the suites given office are compatible with them.

  See you soon.

• 6.3 Lightroom refuses to open after an automatic update Windows 10 Pro

  My computer refuses to open Lightroom 6.3 after my software has been updated automatically by SM.  When I try to open Lightroom, I get a message dialog informing me that Lightroom has been checking the integrity of the Lightroom Catalog.  After 20 seconds of audit, the dialog box disappears and the Lightroom program does not open.

  When this error occurred initially, after the automatic updates of Windows Pro 10, I tried to fix the problem with Lightroom 6.2.1 opting for Lightroom 6.3.  After the Lightroom 6.3 upgrade, I am unable to open my Lightroom program and edit images.

  Hi Robert_Crawford,

  Could you please check the event viewer and let me know for the path of the defective module.

  How to check the event viewer: Photoshop Elements Editor Help. How to find the crash logs on to Windows

  Kind regards

  Tanuj