Update works not for several months.

Similar Questions

• Vista not work not for several months. Set in China and the technology put a pirate copy, now afraid to use. Help

  Christmas 2008 I bought my daughter a laptop with Vista pre-installed.  In May 2009, my daughter called me and told me that her laptop won't turn on.  I am divorced and the children live with their mother in California.  They spend the summer with me in China.  When they arrived in the summer, my daughter brought her phone with her to get fixed.  We took him to the I.T. square in Beijing and the tech said that Vista has been damaged and that he would have to re - install.  When we came back we found he had re-installed a pirate (in Chinese) copy of Vista.  It was last July.  My daughter was afraid to use his cell phone since last summer.  Any advice on how I can get the computer back to normal.  It was bought with Vista on it initially and always has the product key on the bottom of the computer.  Any help would be greatly appreciated!

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   
  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  Any suggestions?

  My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  It deletes recently used contacts and removes also from my iPad.  Any suggestions?

  That you synchronize your contacts with? A decision-making application supported on the computer, a Cloud Computing service?

• Constantly settle for several months now. 800 b 0100 code and Code 646

  For several months now the updates are failling. I downloaded all the security patches, no results found error. What should I do now?

  '0 x 80070646, ' '646', or "1606" error code when you try to install Office updates http://support.microsoft.com/kb/2258121>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MSFix it 50461.msi.

• For several months now I can't run Adobe Creative Cloud... ripetutamente I downloaded but won't... the system tells me to uninstall because the program is in ruins, but the time I tried to uninstall it is me, it's impossible because it's co

  For several months now I can't run Adobe Creative Cloud... ripetutamente I downloaded but won't... the system tells me to uninstall because program is in ruins, but the time I try to uninstall it is me, it is impossible because it is connected to other systems!

  uninstall the application of cc desktop, uninstall the Adobe Creative Cloud desktop application

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

• I've used photoshop for several months when I login, I lost all my fonts and actions... it says that I have zero days left on my trial...

  I've used photoshop for several months when I login, I lost all my fonts and actions... it says that I have zero days left on my trial...

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• What is the best way to store my Canon MX922? I'm not going to use it for several months (6 +).

  I don't use my printer for many months.  What is the best way to keep?  Leave the ink cartridges in the printer?  Get out them?  Store cartridges almost nine in a bag made of plastic?

  Hi mmosher,

  If your PIXMA MX922 should not be used for an extended period of time, please put your PIXMA MX922 using the power button on the unit.  It will be a "cap" of the ink tanks, so they will be ready to use when you print with your PIXMA MX922 once again.  No further action is required.

• P2415Q - no display on DVI, HDMI. No menu. Worked perfectly for a month on the display port

  Line of reason: Dell P2415Q. After a month, works perfectly on the display port, no display on screen Display Port or HDMI, no response to the menu buttons, backlight and power ON but no picture on the screen.
  
  

  Description of the problem
  

  The monitor worked out of the box for a month using the mini display port display port cable supplied with the monitor, which was plugged into my XFX 7970 and 7950 graphics cards. It supports 4K at 60 Hz and has been exceptional for photos, videos and games. Wednesday, the monitor no longer works, no picture or menu is displayed on the monitor. I plugged my old monitor to help diagnose via DVI graphics card even. When I press the power button on the Dell P2415Q monitor, the power LED lights up and the computer detects the monitor (as shown in the menu of the windows screen resolution). He defines as a secondary display but the screen remains black, I see the light power and backlight is turned on. No power save mode popup doesn't appear on the monitor, when I press the buttons of the menu there is no response from the screen, it stays black. I repeated with an HDMI cable, the same problem occurs without intervention or image. I repeated and disabled crossfire (which allows graphics cards to run independently) and tried the second graphics card without response. I tried the HDMI cable I used on my old LG monitor, it works well. I tried to connect a laptop on HDMI to the monitor too, no response from the monitor. I've exhausted all the tests I can think, I guess I'll have to return to the screen for repair or replacement under warranty. A question to the community - and dell rep is there anything else I can try / to make this work? 

  Monitor / computer details
  

  Monitoring of service tag:
  Computer: Non-Dell, build self about 2 years ago. Ivy Bridge i5, motherboard Gigabyte Sniper, 16 GB RAM, XFX 7970 GPU and XFGX 7950 GPU crossfire, 256 GB SSD, Corsair AX 860W (860W on independent 12V rails) supply power. Windows 7, 64-bit. (D2342 LG secondary monitor).
  Operating system: Windows 7, 64 bit.
  Graphics card: XFX 7950 XFX in Crossfire and 7970 (tested separately, product monitor fault at a time).
  Video card driver: 14.12 AMD driver Catalyst (restored to the old driver, always due to lack of product monitor).
  Video card output ports: tested with miniDP and HDMI on both cards, with crossfire enabled and disabled. Monitor product always loopholes.
  Cable video card: miniDP to DP cable supplied with the monitor. HDMI, tested with spare monitor to confirm it works correctly.
  Monitor Menu button: Inadmissible, what power is enabled on the computer detects the Dell P2415Q monitor, the backlight lights up but no image appears on the screen. By pressing the menu buttons produces no result - menu does not appear on the screen. Power LED is lit.
  Monitor purchase: purchased from Overclockers.co.uk March 2015.

  * Turn off the monitor
  * Disconnect all cables from the screen, including the power cable
  * Press the power monitor in pendant button 15 seconds
  * Reconnect monitor cables, then repeat the test. If still no go, your only option is to get exchanged by buying warranty
  * But first serial number must be transferred on your behalf using this form

• I pay for several months for a subscription, but the program propose to install only the demo version of the software.

  I pay several months for a subscription cloud creative but the program offers me to install only demo version of the software. Why what is happening ?

  Hello

  Please see the below help documents:

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Kind regards

  Sheena

• Update for Microsoft Office Infopath 2007 does not install for several months. I have

  Since 12/2009 this update failed to install automatic Update3 runs each time.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Why am I not able to update the latest version of Firefox when it tells me that it is ready to download. It seems "stuck" on the connection to the update server and goes no further. This happens everytime I try for several months now.

  I think that the version he is trying to download is 10.something, and it seems to freeze on the window of 'progress' for quite awhile before I get it close. I've sometimes minimized the window while I did other things, coming to him perhaps 30 minutes later and the window is exactly the same as when I left it.

  You can try the alternative and easier way by downloading from here

  • getfirefox.com

• Vista Windows Update failed for several months

  Hello good people of the forum.

  My Dell Core 2 Duo machine that came with Vista installed stopped accepting updates.  I have about 25 behind now.

  I tried many suggestions I found around these forums (for example, installfixer.bat and windowsupdateagent30 - x 86 .exe) but nothing works.

  Any thoughts?

  What is the name of the McAfee application and is your current subscription?

  An application of McAfee (or Norton) came pre-installed on your computer when you bought it?

  Start | Settings | Control Panel | Programs and features: If you click on Windows to enable or disable features, is the Windows features dialog box empty (i.e. without traits appear)?

  Have you reviewed the suggestions in this thread related?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why I have not received updates of security for the months of May and June yet?

  My latest updates are from the month of April. My automatic update is enabled. I also tried to update manually, but 0 (zero) updates available. Can I know what is the basis of time to release the updates? A little help here? Thanks in advance.

  Can I know what is the basis of time to release the updates? A little help here? Thanks in advance.

  AldrinMandeoya,

  Updates Microsoft security release the second Tuesday of each month at 10:00 am Pacific time.

  Non-security updates are published on the fourth Tuesday of each month.

  There are no updates normally more than one or two a month out of this cycle.

  Update definitions for Windows Defender and Microsoft Security Essentials will be displayed in the history of the update.

  http://TechNet.Microsoft.com/en-us/security/dd252948.aspx

  E-mail: Service of Notification of security

  06/15 / 1102:57: 46 am

• Why a home sharing started everything leaving iPhotos to show. I have been using Photos for several months to share on my Apple TV.

  I use your Apple TV (3rd generation) to display photos for my artwork. I use the Photos app and not to use iPhoto.

  My photos are organized into Photos in special albums. Over the last five months, I can choose Photos when I turn home sharing.

  My only option is now iPhotos. I need to use photo albums.

  How can I change the option of iPhotos Photos?

  I rebooted several times home sharing.

  My software is up to date for iOS 9.2

  Try again one thing that worked for me tonight.  Under the file Menu for home sharing, there is another selection to choose photos to share with the

  Apple TV.  He missed in iPhotos library, but can be changed to the photo library.  Then restart iTunes.  I disabled the home sharing and then he turned back and Photos using the Photos finally shown at library.

• TV Guide online works not for more than two weeks now.

  Suddenly, my Sony Bravia KDL-52W4100 does not show TV lists. It has worked before, but stopped for some reason any. I tried unplugging the TV as suggested on more than once and reset, but it still does not. TV Guide screen on the installation progress screen explains the time search and alignment of channels is done, but searching for TV channels with the TV Guide data is 'in progress' and next lists transmission begins tonight at 23:56. This same screen appeared daily for at least a week now, with no list showing on the TV guide. Get very frustrated because I checked online, and because this model is no longer made I can't find anything. I've updated my software a few years ago is up-to-date. Someone else has this problem and able to understand? Help, please!

  Thank you for your post and welcome to the forums.

  Please see the following article pertaining to Rovi's TV Guide Knowledge Base:

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C1032343...