Updated for iPhone, mega mind now videos on my new iPhone.

Similar Questions

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• more recent good video driver updates for M4600 with ATI M5950 video card

  My hard drive has failed recently and I had to reinstall from scratch. I used it for a few months now without other problems.

  Currently, I am having a problem where a program (formZ) modeling in 3d displays wired but no polys in its modes of rendering opengl. I had this problem in July 2014 and it is resolved by updating my drivers which was available on the website of dell at this time. I have also some odd polys displaced and shadow flicker in sketchup which I didn't have before.

  According to me, it's my drivers, but the most recent driver available for the m5950 on the m4600 has 'changed' in October 2013 and when I install it, the problem is not resolved.

  Someone at - it a newer driver that 8.850.7.8000 (as of 12/19/2011)?

  Well yes that suits him.

  Although not quite, the link that you sent me was for certifications of driver for specific programs and some video cards, not including mine. However, I could find what I needed on the site of AMD:

  http://support.AMD.com/en-us/KB-articles/pages/workstation-graphics-drivers.aspx

• Updated for Firefox 36.0 now get Windows Security Alert

  Hello

  Updated for firefox 36.0 24/02/15
  Now to get a Windows security alert
  Windows Firewall has blocked some features of this program.
  Name: Firefox
  Publisher: Mozilla Corporation
  Path: C:\program files (x 86) \mozilla firefox\firefox.exe
  Private networks is enabled and grayed out.
  Public networks box is not checked and ask to allow access.

  When I look at the programs allowed through firewall it shows Firefox 2 programs.
  Firefox---(la case est décochée)
  Firefox C:\program files (x 86) \Mozilla Firefox)---(case cochée)

  Also on 24/02/15
  There are updates Windows 7 and an update of definition of MSE.

  When I started the computer 25/02/15 the Windows security alert appeared.

  I have not allowed access to Windows Security Alert window.

  Why this security alert Windows has been published?

  The Windows security alert is the only issue.
  Firefox works normally. He never does not.
  I have internet access on my private network.

  I use Classic theme restaurateur.
  What's interesting after clicking on menu + customize, I moved the icon Hello in the box additional tools and features.

  When updating to 36.0 FF
  Hello icon brought itself automatically.

  I just clicked Cancel on the dialog box and the Windows security alert went away.
  Everything that Firefox still seems to work fine.

  If she comes back, I will inform this thread.

  Thanks,
  

• I have stopped way to update for LR6... now the bed message "update not for iMac 10.8.5"

  I have dec 2012 iMac 10.8.5. He was CS6.

  2 months ago that I bought the drive for Lightroom 6 because I don't want to use cloud. I installed it and the two have worked well...

  Recently... I started updates for CS6 and LR6.

  And in the Middle updates... with panic and perseverance...

  I turned off my iMac in the middle of the update... realizing turned their availability of cloud...

  Now my CS6 icon is no longer, it is replaced by the Ps icon (when I activate it, there still etiquette "Photoshop CS6"). This method works.

  the Lr icon is, but when I try to turn it on, it has message...

  "You cannot use this version of the"Adobe Lightroom.app"application with this version of Mac OS X.

  You have OS X 10.8.5. The app requires OS X 10.9 or higher. "The LR6 will no longer appear.

  How to get older versions of CS6 and LR 6?

  You must uninstall, remove, your current installation of LR and then go to this link

  Install Photoshop Lightroom

  At the top, you want to download the Mac version of the Application Installer and refresh forever. that will return you to the original version of LR 6.

  But I suggest that you upgrade your operating system to El Capitan and continue to update LR to the 6.5.1 update this link.

  Update of Lightroom

  NOTE: do not install the update of 6.6. Install the 6.5.1 update. The 6.6 update bugs in there.

• Updated for first CC 2014 - now get boot error - could not find capable video game modules

  I have a MacBook Pro with NVIDIA GeForce GT 750 M 2048 MB retina end 2013.

  Since the update of the first CC 2014 on the launch, I get this error just after it shows the loading of "ExporterQuickTimeHost.bundle" (I tried to delete it, but he always did, so I don't think that it has nothing to do with the QuickTime plugin):

  Adobe Premiere Pro startup error

  Adobe Premiere Pro has not found all capable video game modules. Please update your video display drivers and start over.

  I never had it in the CC version. I have the latest version of the CUDA driver: version 6.0.46 & Driver GPU: 310.40.35f08 version 8.26.21

  The computer is unusable for about 4-5 minutes after it produces until it clears all the way to the top. This whole process takes up to 7-8 minutes!

  This same thing happens also with Prelude CC 2014.

  If anyone knows what's going on I would be very grateful.

  Thanks, Maz

  I found a solution that worked for me. Seems to be a permissions issue. Here is the solution I found (found here: CC 2014 startup problems: Adobe Premiere Pro):

  In the finder menu, click and hold down the menu REACH. That hold the option key and the library user will appear. Click on the user's library.

  In this folder, go to preferences and find the adobe folder.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  Then relock the lock.

  Now, go to your OS hard drive and click on users, your user name, Documents.

  Find the adobe folder there.

  Right-click on the adobe folder and click get info.

  In the permissions section, & sharing, there are three names.

  Everyone should say read & write beside them.

  Open the lock, turn all to read and write.

  Then click on the little train directly under the names or to the left of the lock and the menu drop down click on 'apply to the included items.

  The lock, the lock again.

  Wait a minute. Then launch first.

  This fixed it for me.

• I just updated to Firefox 23.0 for Macs and installed updates for Flash and Silverlight; Now Google 'search tools' & find image will not work correctly. Suggestions?

  When I click on 'search tools', options are no longer displayed (for example, the tool that allows a search of limited date or search for videos of different lengths). I happened to have a search page open before the update and drop-down menus to search tools always appear on this page, but if I click on it, the menu drops down, so I can't change the options. When I do an image search, the results page shows only 20 or if the images and the rest of the results appear only as gray rectangles with/without any image. Search tools work normally in other browsers, I installed it, but Firefox is my default browser (and I'm happy with that), so I want to fix the problem. I don't know if it is associated with the updates, I did yesterday, but it's the only thing I can think of that's changed. Before that, the search tools have been working properly.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• I have XP I have down loaded the update for Kodak printer 5300 now will not work. It is said to use advance dot placement mode size of paper by a select line

  I down loaded the 5300 Kodak down load nd now the printer works well not. It is said, to use advanced point positioning mode select a paper size by a line and the paper tray

  Hello Forrestar,

  Thank you for your message.  We will try to remove the software that you have installed, and then reinstall the latest version of the software for your device.  Did this update also includes a new driver?  If so, you could try to restore your driver to the previous version.  Please let us know so that we can help you more to get this problem is resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Updated for Firefox 30.0 now Citrix Receiver does not open

  I am to discover that anyone who has updated recent firefox 30.0 is not able to open the Citrix Receiver. Opens the window of the application, she will not open the citrix receiver to open FM. I have several people that has updated and can not open FM. Me too, has just updated today to 30.0 and now does not open FM earlier in the morning, I was able to open and use Firefox 29,0/FM.

  I disabled all plugins... He's going to open a pop window to 'Open with' Citrix Receiver (default). And yes - it will open our applications now.
  So now...
  Firefox or citrix must adapt. Please fix so that I don't have to disable plugins app of 200 users. Thank you

• HP sent TS 15 - EOM24UA #ABA: updated for Windows 8.1 now my microphone does not work

  Microphone no longer works when I updated to windows 8.1

  Hello @13mjw13,.

  Welcome to the Forums of HP Support!

  I understand that you have a problem with your microphone and tried to help you!

  You need to update the Audio driver for Windows 8.1.  Please consult the following document to help you, if necessary:

  HP computers - resolving microphone problems (Windows 8)

  Please let me know if this information has been helpful by clicking the thumbs up below.
  
  Have a great day!

• Updated for Firefox 18, but now have strange figures to the monitor (triangles and similar) where Firefox is open. I should go back to version 17. Is there a solution?

  I have always used Firefox and updated today at 18 of Firefox. After update, I have strange whixh figure (giant triangles, lines,...) are randomly appear and it of impossible use Firefox. I went back to the 17 Version and everything is OK.
  I use Windows XP SP3 with Nvidia 7800 GS card.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Updated for Firefox 8 today. now, said Sync is incompatible with 8. That is what it is? Thank you.

  Just upgraded to Firefox 3.6 8, after getting a message that 3 wouldn't be supported much longer.
  I Sync is an extension of Mozilla, so I'm surprised, it's not compatible with version 8. This is a temporary situation, or I have to revert to a previous version.
  Thank you.
  Daniel

  Versions of Firefox 4 + have built Sync, they do not need the add-on Firefox Sync as Firefox 3.5 and 3.6 made. Uninstall the add-on Firefox Sync.

• Latest IOS update for iPhone 5

  I downloaded iOS 9.3, but it will not install because it says that I am not connected to the Internet.  My problem is that I'm connected to the Internet Wi - Fi and cell phone.  I tried to disable my cellular data and use the Wi - Fi only and vice versa, but it keeps giving me the same message.

  

• I got updates for windows vista, but now my microsoft Word 2007 does not work. It ask for a product key and I put one of the dvd case, but he said that is not correct, I use program can someone help with this problem.

  product key no longer works on my office 2007 business what could be the problem?

  Hi Cincmj,

  Welcome to the Microsoft Answers Community Forum site!

  The question you have posted is related to Microsoft Word and would be better suited to the community of the Office Applications.

  Please visit the link below to find a community that will support what ask you:
  Discussions in Desktop Applications
  http://www.microsoft.com/office/community/en-us/FlyoutOverview.mspx , that allows to solve your problem!

  I hope this helps!

  Thank you best regards &,.
  Calogero - Microsoft technical support.
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think