Updated KB2656368 and KB2686827 do not install, get an error code 641

Similar Questions

• I can't download the new updates from 8 may 2012. I get the error code 641. In a separate issue I get Windows Installer errors.

  I'm running Vista window 6 service pack 2 32-bit.  None of the 8 steps for further research for this error worked.   I tried the regfix_vista.reg and the msiserver.reg proposed corrections and will continue to receive the error code 641.  I spent weeks and weeks on this and nothing works.  I want to give up.  Everyone knows the same problem?  I uninstalled the e/s from my list of software system mechanic who had been previously suggested as being the culprit for this problem...

  Perry

  System Mechanic is your troublemaker & you have lots of company! [1]

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• Some updates were not installed, get the error code 646

  Some updates for windows vista, you receive the error code 646 were not installed and I tried to update manually by using registry files and still isn't updated do not know what is the problem, but when trying to install update, say, it's something on a restore point for the update

  Hi Lori,

  -What are the updates that fail to install?

  I suggest you try the steps in the following Microsoft Article.

  You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/2258121

  See: http://windows.microsoft.com/en-XM/windows-vista/Windows-Update-error-for-80070646-or-646

• updates will not install, get the error code 80242006 (windXP-64 bit)

  Why my updates does he move?  for one I get eror Code unknown error 80242006. I use Windows XP 64-bit

  Kacy

  Take a look at this link below and follow the instructions and see if that helps you at all.

  http://support.Microsoft.com/kb/956707

• I tried several times to install security updates KB2541025 and KB2543854, but each time getting the message "code 779.

  Original title: update problems

  I tried several times to install security updates KB2541025 and KB2543854, but each time getting the message "code 779" and "Windows Update has encountered an unknown error. I tried to find an explanation here, but no result.

  see if that helps-

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Will not install KB947821. Error code 80073712.

  Will not install KB947821. Error code 80073712. Although the update KB978207 has been correctly downloaded and installed after that. All this happened after the uninstallation of McAfee antivirus. Also, I'm sure that for this reason, IE8 now does not load all run any activex so content. Downloaded and run the uninstall McAfee tool but no change.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. Even if the trial version is not enabled, you MUST uninstall it and download/run the appropriate removal tool before you install updates, Windows Service Packs or IE updates and before installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB2449741 not can not install with an error code: 80092004 in ser Win 2008 R2 Enterprise (RTM)

  KB2449741 not can not install with an error code: 80092004 in ser Win 2008 R2 Enterprise (RTM)

  Hello Muneswar M.

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum. You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/categories

• during installation of windows vista service pack 2, an error code comes and says that some updates to update were not installed with an error code (KB948465) _

  system information:
  Windows vista edition Home premium
  2007 micro.corp. service pack 1
  Manufacturer: Hewlett-Packard
  model: compaq presario CQ61 notebook pc
  ORP of 32 bits. sys
  Processor: cpu t3400 2.16 GHz

  And the error was...?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  =====================

  In no order given...

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005:
  http://support.Microsoft.com/kb/971204

  0X8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
  http://support.Microsoft.com/kb/947821

  Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
  http://support.Microsoft.com/kb/967818

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error code 641, cannot install Windows updates.

  Reluctant to do a reinstall of windows.  I had the same problem, find the same useless information on a cure.  I did a reinstall of windows (Vista) and partially by installing the updates of windows I ran into the same problem again, the windows installer does not.  Even from scratch will get not anywhere, leaving you at least your system as it stands leaves can be used instead of a partially updated with no program system.

  I wonder if Apple has this kind of problem?
  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_7-system/get-error-code-641-cannot-install-windows-updates/c3f6c853-10e9-4585-b941-f960e02cf9a4

  Hello

  I suggest to reset the Windows Update components and check if it helps.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Let us know if it helps.

• I tried to install the updates, but I get the error code 641

  I tried to install updates that have been downloaded.

  Try to install the result in the error code 641

  Original title: what is the error code 641

  The other post:

  My problem is on an old computer (not this one) running Windows Vista Home Premium.  Show downloads are KB2690729, 2656353, 2656370, 2604111, 2604121, 2656368, 2656045 and 2686827.  When I tried to download individually, the first and the third update (above) showed as being downloaded correctly, yet when I checked the list of updates successfully, none of these appeared.  Since that time, the system generated downloads 8 updates have been fruitless.

  Like the other reviewers, I run IOL System Mechanic and have noted your comments about the interaction between the SM and windows.  Personally, I hesitate to attempt changes to the registry based on the stories of war, with that I've heard of people who do not have the knowledge/experience/skill to work in the more than causing registty problems they started.  I have not contacted LIO, wondering if this was done either by Microsoft with others who have similar problems.

  I hope that you have more tips to share what to do: this problem.

  Thanks for your help.

  Hi rob3274,

  I combined the message you did in another thread to this original to avoid confusion.

  In response to another poster asking if System Mechanic caused their code error 641, one of our MVP, PA bear MS MVPreplied with this:

  There is no doubt in my mind that System Mechanic caused this!

  And you have plenty of company, too. See these recent discussions-online

  ~~~~~~~~~~~~~~~~~~~~~~~~

  OPTION A: If you have backups of ALL System Mechanic has EVER done on your computer changes, restore ALL the & restart and test - and then uninstall System Mechanic & some other registry cleaners. [1]

  OPTION B: Execution of RESOLUTIONS methods 1, 2 and 3 in http://support.microsoft.com/kb/2642495 then reboot & test.

  OPTION C: Contact System Mechanic (iolo.com) support, assuming you have purchased System Mechanic Professional.

  ===========================================================
  [1] TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  Since the thread here.

  I hope this helps!

  Debbie_H

• Get 3 error codes 641 80070641 8004FF01

  I tried these links for this problen several times.  System reports errors were found and repaired.  Problem is repeated on the next attempt to update Windows.

  I get 3 error codes:

  614

  80070641

  8004FF01

  Someone suggested using safe mode and delete file - Windows\System 32\Software Distribution.  I am wary of this notice.  Do you recommend?

  These compensation any help is appreciated.

  Sam F

  System Mechanic is your troublemaker & you have lots of company! [1]

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem application has caused!

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  =====================================================================
  [1]

  [Last updated (in a marked way) - June 28, 2012, 20:01 UTC]

• BSOD after updating Windows and it is not installed.

  A blue screen of death appears whenever I put it in sleep mode, standby time, turn it off or restart.  It happened from a windows update when I started it up after it stops after the update, and she appeared with another update.  He still wants to install the update, but it still gets a BSOD at the end.  The BSOD seems to point to usbhub.sys.  Thank you.
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  More information about the problem:
  BCCode: 1000007e
  BCP1: C0000005
  BCP2: D 907 5013
  BCP3: ACF80B68
  BCP4: ACF80864
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini042210-01.dmp
  C:\Users\office depot\AppData\Local\Temp\WER-113724-0.sysdata.xml
  C:\Users\office depot\AppData\Local\Temp\WER5DC8.tmp.version.txt

  You indicate that you get blue screen after the update is finished installing. Or do you find only the blue screen when you perform certain functions with the system which requires a State of transition of power (sleep, restart, etc.)?

  You've got bugcheck SYSTEM_THREAD_EXCEPTION_NOT_HANDLED caused an access violation.

  You can download the contents of c:\windows\minidump on your SkyDrive? The discharge can take probably a few additional details.

  To treat blue screens, following general tips:

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Other common suggestions include ensuring drivers are up to date (including video drivers), but also to ensure that you use the latest version of the BIOS.

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  For the case of memory corruption such as you seem to be experiencing, it may be useful to use Driver Verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings - > then-> the names of the drivers select in a list-> next-> sort by provider-> select all non-Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for an error checking to happen after you have enabled the auditor as described and then transfer it to your SkyDriveand provide a link.

• Updated KB3076895 and KB3108381 do not install

  Two weeks ago I started to receive updates for KB3076895 and KB3108381 for Windows 7, which I can not install. First of all, these updates are from 2015, it is now August 2016, and secondly when I went directly to Microsoft to download I received a message "... not applicable to my computer."

  Needless to say, I'm not really in this gene daily and made a really good Apple look. To the when they tell you that they have an update a) is actually ('new' recent update that comes actually from December 2015?) b) I can actually install it.

  Response by number:

  1 KB2939576 or KB3108371 listed in installed updates (not update history)? [1]

  2. How about KB3175443, KB3178034, KB3177725, KB3167679, KB3179573, KB3172605, or KB3161608?

  3. is Internet Explorer 8 (IE8), IE9, IE10, or IE11 installed?

  [I'm sure to have many more questions for you!]

  ==============================================
  [1] start | Control Panel | Programs and features. See installed updates (in the left menu)

• I have 36 updates won't install, get the error Code 8000FFFF + Code 3715

  Code 8000FFFF + Code 3715 is in my Windows Update.  I have 36 updates which will not be installed.  Mr. FixIt did without touching!  I did research for months for a solution to the Code 8000FFFF, just to finally get 3 or 4 new files update.  They settled, but then the second error, Code 3715 appeared.  I have a Compaq PCSR5501P Tower, 3 GB of RAM and 4 GB ReadyBoost (at recommended setting) with Windows 32 bit Vista Home Basic SP2 and ESET Smart Security 5.  Also, I have a Seagate 2 TB external drive.  It was not connected during this period for months, then Windows Defender found a registry error about this.  I removed it to the Defender.  I consider myself to be a bit smarter than the average bear, but it beats me.  I know it's 9 out of 10 times it simple!

  OK, the technophiles who takes up the challenge of can make a grinder monkey out of me?

  Thanks a lot for the people who understand and care to share.

  Q

  Hello

  1 did you do changes on the computer before the show?

  Method 1: I suggest you try the steps mentioned below and check if it helps.

  Windows Update Error 8000FFFF:
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8000ffff

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Method 2: If the problem is not resolved I suggest you try the procedure described in the link mentioned below.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  And take note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Check if you can install the update from Windows.

  Hope this information is useful.