UPDATED MY LAPTOP BIOS IDLE

Similar Questions

• Re: Satellite Pro L40 - killed the laptop BIOS update

  Recently I thought it would be better to download the latest drivers and upgrades for my Satellite pro L40 to keep up-to-date and partners the laptop that works smoothly. I couldn't have worse summer. Before I updated the new driver updates I thought it would be a good idea first update the Bios. So I downloaded the update of the Bios on the Toshiba site, unzipped the files and followed the online instructions for updating the BIOS. I double clicked on the BIOS file to run the update, the laptop says it was end the session, I waited and the Toshiba logo screen came. In the instructions, it says that I have to press F2 now and confirm that the date and time are correct. I should then press F9 to load all the default values and then press F10 to save and exit. At this point, the laptop must away to the loading screen, but... I got a black screen. IV turned off the computer and turn it back on, but still, I get a blank screen. The lights are on but know one's home.

  Could a mod/staff/Board Toshiba administrator please explain to me why I'm going to draw the consequences of my lack full on my face because I followed a form of direct teaching of personnel of Toshiba or... Please run me through the process of bring back my cell partners in life, before that I get my Crown snatched jewels. This isn't a laugh. An upgrade directly from the manufacturer is not intended to cause you problems!

  Please get back to me as soon as POSSIBLE. My first son moments of life (videos, photos) are on this laptop. That cannot be replaced. Please tell me that the laptop can be fixed...

  Hello Durks

  I'm really sorry to hear you I have this problem.
  To be honest, it is not easy to discuss about this because a lot of people on this forum with a similar or same problem reacts quite aggressive if they don t hear exactly the thing they want to hear.

  In any case, I just want to write my comment. Don t be worried about photos and other important data. You can remove the laptop HARD drive, put it in a small box of HDD SATA 2.5 and connect the HARD drive to the other PC / laptop as external device. You will have full access to all stored data. So you can do the backup.

  Update the BIOS.
  What to say at this point?
  I have checked the Toshiba download page and saw that the BIOS update is available for Windows XP Home edition and Vista pre-installed notebooks so I hope you ve chosen the right one. Anyway, it is not easy to fix screwed up in the BIOS. You hate me now, but I think you should contact the nearest Toshiba service provider and ask for help. Call them, explain the situation and ask what you can do about it.

  I hope you will fix this laptop soon.

  Good luck.

• HP ENVY 360: Used aswr Forum to install the update to the Bios of HP laptops, but SUP Assist does not recognize

  The laptop BIOS update failed in the support Assistant.  Has found the solution on the Forum, which has successfully installed.  Support Wizard reports that the update must be installed after the reboot to finish installing the bios update.  Why can't support assistant recognize the update is complete and it's a matter of remove the updated rating in SA and display it as was not?

  HPSA can be buggy sometimes. I would dismiss the alert about the BIOS.

• Various recurring error messages blue box when the laptop is idle

  I have a new (10 months) HP Pavilion dv7 - 3165dx running windows 7 home premium 64-bit.  After that laptop sitting idle for a while, the screen goes black with a blue box error message.

  01/02/11-02/14/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Disable or uninstall any antivirus, commercial defragmentation or disk backup.  Check the configuration of the disk hard yoru and check the updated drivers.  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Call Technical Support HP - a talked to Josh: I was sent to HP.com support site to download software downloads and the pilot.  Said it is known the problem and had me run the CHKDSK command to automatically solve problems.

  02/16/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Make sure you have enough disk space.  If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates.  Try changing video cards.

  Check with your hardware vendor for updates to the BIOS.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

  Technical information:

  Stop: OX0000007E (OXFFFFFF800032D3905, OXFFFFF88002B97288, OXFFFFFFFFC0000005, OXFFFFF88002B96AFO)

  Data collection for the crashdump...

  Call the HP Technical Support - talking to Matt: check space drive, and said that it was very good.  Updated graphics driver.  Disabled the hard drive protection.  Power options reset of Hibernate to standby mode.  Update BIOS of F.10 F.15.  Ran test drive: Smart check, DST short and long DST all spent.

  02/17/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  System_Service_Exception

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

  Technical information:

  Stop: OX0000003B (...)

  Data collection for the crashdump...

  I don't ' know what to do at this point.  HP phone support seems unable to solve my problem.  Can someone help me?

  Hi DP - K,.

  Thank you for all the helpful tips.  This weekend when I saw my McAFee scan/security reports, even if the McAfee Security Center shows that viruses and spyware works, he did not run a weekly full scan on my laptop since the end of January.  I don't know if he tried to scan and then breaks down, or it will not start.  When I tried to run a manual scan, windows shut down and I got a blue screen error message after about 5 hours of scanning - 63% digital.  When I ran the HP System Diagnostics report, it showed that my Security Center has not recorded an antivirus product.  "The Security Center cannot identify a current antivirus application.  There is no product protection antivirus installed or it is not recognized. "When I ran the HP reliability and history of problem report, it showed that my error messages started on 01/02/11, which is what I remembered.  I was able to restore my laptop to 23/01/11 when I had no problems and then, I uninstalled McAfee security and re-installed software.  I manually ran a full scan and it took 5 hours to complete, it has completed and reported no problems.  I look today and so far, no problem.  If the problem happens again, I will try the suggestion of Avast below.   Thanks again for all your great suggestions.

• Username and password required for the update of the BIOS download?

  Hi guys,.

  Hoping someone could help.

  Yesterday, I received my Mini of click on Satellite and I currently support after discovering there is a certain drivers are installed before you can actually use the thing.

  While the laptop is in charge, I try to download the update of the BIOS on my laptop, so I can transfer it to my laptop once it is fully charged... I did have problems downloading tastes of the driver wifi for example but when I try to download the BIOS update opens a new and tab where Toshiba ask me a username and password? I tried to enter my username and password I used to register on this site and I also tried using another computer to download it, but without success. It is worth noting that I could partially download the file last night but then it failed to half way through download?

  Any suggestions?

  Thank you very much

  Liam

  Hi all

  I am eager to read an answer that helps on these issues...

• The update of the BIOS on Satellite Pro U400?

  I have a Toshiba Satellite Pro U400 (PSU41E) running Windows 7 x 64 and I try to update the BIOS to version 4.70 to 4.00.

  Whenever I try to do it from Windows using WinPhlash which comes with the download on the Toshiba site it seems to freeze when you try to Flash the new BIOS.
  I connected as the local administrator, tried to use other programs flash and even tried to do from a USB flash drive with no luck.

  Can someone please help me and explain how do I update the BIOS?

  Hello

  > tried to use other flash programs
  Never use other flash programs! In the worst case, you could damage the ROM module and then it must be replaced. Use only the program flash Toshiba that is tested and designed for laptop and the version of the BIOS.

  The update of the BIOS program is also designed for Windows, it s a Windows Update program.

  Satellite Pro U400 wasn t comes with Windows 7 so I guess you did your own installation. Value added package is required for the update of the BIOS program and can be downloaded on the European driver of Toshiba download page where is your laptop model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• Satellite Pro P200-15W: update according to BIOS 1.9 fans walk all the time

  I have a Satellite Pro P200-15W. After recently running the BIOS update to version 1.9, the fans started running all the time and are extremely loud. Also, he did weird things for Firefox, Thunderbird and NAV.

  I would like to "Uninstall" the update of the BIOS if possible. I found [this link: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1080 89xml & sliceId = & dialogid = 24408215 & stateId = 0% 200% 202 4406262] who treats the restore running CD.

  If I run this CD, which will certainly restore the BIOS to the previous version?

  Is there a less destructive way (ie: that does not erase the hard drive)?

  Thank you

  Ben

  Post edited by: cannboys

  Hello

  It seems that the picture of the fan was changed and renewed in the new version of BIOS, and so fans run fall.
  Why the table fan has been changed?

  Well, usually something like this is necessary to improve the reduction of the internal temperature while the CPU and GPU are running with maximum performance.
  This helps to prevent the equipment from damage!

  > would like to "Uninstall" the update of the BIOS if possible. I found this link that explains the running restore CD. If I run this CD, which will certainly restore the BIOS to the previous version?
  > Is there a less destructive way (ie: that does not erase the hard drive)?

  Usually, the recovery CD formats the whole HARD drive (partitions too) and installs only the image of Toshiba on the notebooks of HARD drive. The image contains the OS, drivers and additional software and has nothing to do with the BIOS update.
  But you can try to recover the laptop to see if you can solve the problems of software!

  If you want to reverse the BIOS, you will need to contact the ASP in your country!

  Sorry, but all I can suggest.

  Best regards

• Portege Z930 - 12 H - update of the BIOS and McAfee Endpoint Encryption?

  The update to the latest BIOS (Ver.6.70) for my laptop Portege Z930 12 H comes with the warning:

  «If you use the BitLocker Windows Drive encryption, please temporarily suspend (or turn off) before BitLocker Drive Encryption updated BIOS.»

  The same caveat applies to McAfee Endpoint Encryption, which is used on my laptop and I can * not * pause or stop? Or can I apply the upgrade of the BIOS safely?

  Thank you.

  As much I know Bitlocker isn't related to Antivirus from McAfee software and two security tools are not connected to each other. BitLocker is a tool for Microsoft Windows and McAfee is a 3rd party software preinstallation on the device.

  I found a nice how doc on the update of the BIOS.

  [How to upgrade the BIOS on Toshiba laptops | http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm]

• Satellite A110-180 - update of the Bios for Windows 7 and Linux

  Hello

  I want to change the following settings in my bios on my laptop satellite A110-180
  * AHCI for SATA
  Disable the IDE

  But none of these options.
  So I thought that maybe I should update my bios.
  I found the download page, but there are 2 options: Windows Vista or NO vista, but I want to dual boot windows 7 and linux.

  Which one should I download, or is there another option to change the settings?

  Thank you!
  Bart

  Hello

  Satellite A110 does not support these options (SATA AHCI).
  The update of the BIOS will not help you!

  Linux is not supported and therefore, you will not find any special BIOS for Linux OS!

  The two BIOS updates are for Win Vista or OS independent.
  Therefore, if you use other than Vista OS then you should throw the update of the independent BIOS to the BONE!

  But as mentioned above; both options will not appear after the BIOS update!

• Satellite Pro C660 bricked by update of the BIOS that failed

  My sister asked me to update his laptop (Toshiba Satellite Pro C660-16N; The part number PSC0ME-01S00SEN) of Windows 7 Home Premium (64 bit) of Windows 8 (64-bit).
  So I did.

  Then I went UK from Toshiba Web site to check if there are any drivers I had to install for Windows 8. The only one was an update of the BIOS (for BIOS v1.70). I don't know what was the previous BIOS version number.

  So I run the update application in Windows 8. Phoenix WinPhlash Technologies starts and then in the middle of the update, everything freezes.

  The trackpad would not move the cursor or anything like that. I had no choice but to disconnect the phone from the wall and remove the battery. The laptop is not under warranty.

  Of course, now it won't turn. It will beep once when I press the power button, but the system does not light. A few minutes later, it looks like one long beep and two short beeps. It then keeps repeating this sequence every two minutes "one long beep, 2 short beeps".

  I google and read the site after the blog after the post on the forum, but nothing works. Links to the software offered on these forums/blogs/Web sites in french are usually dead, so I can't try what they suggest.

  The most common solution is the Phoenix crisis recovery tool. I managed to download v1.0.0.4 which is supposed to allow me to make a bootable USB key. The version of this tool that I downloaded is supposed to be for a Lenovo ThinkPad X 200. I have the correct BIOS.rom to C660 Pro Satellite (I renamed BIOS.wph and copied to the appropriate folder).

  I followed all the instructions, but it doesn't seem to work. Some sites say if it happens, I have the wrong version of phlash16.exe. Some other sites say that HP Boot Disk USB Utility should be used, but I don't know how to use it.

  What I really need, is a definitive step by step foolproof guide to know what to do, with links to the files/tools to use for this model of laptop. I will follow this blindly (which I don't really understand what makes each step, I just do it with no understanding,) so if anyone can help me with this, please write a guide like an idiot!

  If anyone can help me with this, I appreciate it. I'm really in a difficult situation - I can't really afford to pay a Toshiba ASP to fix it, and I can't afford a new laptop certainly. But I also couldn't bring myself to tell my sister, ' it's broken, deal!

  Thanks in advance.

  Take a look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59637

  Perhaps the last comment by the user * gansell1980 * could help you.
  Otherwise, you need help from the Toshiba authorized service if you reflash the BIOS ROM module provider

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

• Tecra A8-185 - the update of the BIOS under Windows 7?

  Hi again,

  I have a question how update of the BIOS under Windows 7 ultimate x 64. I downloaded the latest version of the BIOS for my laptop (Toshiba Tecra A8-185 PTA83E). After having unpacked there is only the .exe file.

  When I try to run this file, he said, that my OS is not supported. When I run it in compatibility mode (with Vista or XP), it starts the upgrade, but gives me an error: "the BIOS upgrade is failure (8). BIOS is not able on this configuration. "What should I do? I really need a new BIOS.

  Can I run it at the start of the USB key, or whatever?

  Hi offi55

  Why do you need a new BIOS? You may notice some problems with the laptop or why are you trying to update?

  However, I think that the update should only be done on the pre-installed Windows version (XP or Vista). I guess that this update n t tested and designed to update Windows 7 so I think that would be the reason why you can t.

  So to install Windows from the Toshiba Recovery disk and try to update again. It should work.

• Satellite A660 - 11 M - update of the BIOS (Winflash) crashes every time

  Hi all
  I bought an A660 - 11 M a few months ago and thought I would update the BIOS to stop nagging Tempro and see if she helped no insidious problem, I tried to correct. I downloaded the zip, extracted and ran the .exe according to the instructions on the help site. WinFlash opens, runs the first step (new load bios) but hangs on step 2 (analyze the compatibility of old and new bios). Then a message "Winflash.exe has stopped working" Windows appears.
  This happens whenever I have try, even with shut down antivirus and directly after startup with no other programs running.
  Any ideas?

  I am running Windows 7 Home Premium 64 bit, I "dualbooted" Ubuntu using wubi, but the update to the bios was not until I installed IT... Perhaps it would work better in wine? ;)
  Any help is greatly appreciated!

  To be honest the best option for you is to remove Tempro system and be happy.
  In General, if the laptop works well, you need not update BIOS.

  If you see it doesn't work properly with her don t risk. If something's not going to screw you up BIOS and kill the machine.

  In any case, let's see if someone else with the same notebook has updated the BIOS successfully.

• Satellite A200 - 28H - update of the BIOS has not

  Hello

  I have a Satellite A200 28 h.
  -----
  {color: #ff0000} * I try to upgrad my bios of my laptop froze I turned it off using the highlight of power
  * now its dead please help me to save my pc *.

  {color}-

  {color: #ff0000} System properties:
  {color} {color: #ff0000} Manufacturer: {color} TOSHIBA
  {color: #ff0000} Product: {color} Satellite A200
  {color: #ff0000} Version: {color} PSAE6E-0GL045FR
  {color: #ff0000} Serial number: {color} 38258574K
  {color: #ff0000} Identifying unique universal: {color} 5FDE397F-EFCD11DC-91D0001E-EC32FB26
  {color: #ff0000} Startup type: {color} power button
  {color: #3366ff} Properties of the motherboard {color}:
  {color: #ff0000} Manufacturer: {color} TOSHIBA
  Product: ILHAM
  {color: #ff0000} Version: {color} 1.00
  {color: #ff0000} Serial number: 0123456789AB {color}.
  I downlod this bios: [update of the BIOS | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 153 & selProduct = 738 & langua ge = 16 & selOS = 26 & selType = 4 & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = 45 & 1 6 = selectedLanguage & type = 4 & page = 1 & FROM = vista & ID = 66222 & DISO = 26 & pilot language = 42 | bios] -.

  Driver details
  To download your chosen file just click on the file below. When prompted, select "Save this file to disk" and select "OK".
  The file will then be downloaded and saved to a location specified on your computer.
  Downloaded files can be opened and extracted using WinZip (select the WinZip link to download a copy of WinZip software).
  See below or check the contents of the zip for installation details. [Update to the BIOS: http://eu.computers.toshiba-europe.com/innovation/vista_drivers.jsp?service=EU&from=download_driver _ details & action = search & SelCategorie = 2 & selFamily = 2 & lSeries is = 153 & selProduct = 738 & language = 16 & selOS = 26 & TLigne is = 4 & yearupload = & monthupload = & dayupload = & useDat e = null & mode = userMachines & search = & action = search & mac Id = & country = 45 & action = search & page = 1] [Return to the download page of Driver: http://eu.computers.toshiba-europe.com/innovation/vista_drivers.jsp?service=EU&from=download_driver _ details & action = search & SelCategorie = 2 & selFamily = 2 & lSeries is = 153 & selProduct = 738 & language = 16 & selOS = 26 & TLigne is = 4 & yearupload = & monthupload = & dayupload = & useDat e = null & mode = userMachines & search = & action = search & mac Id = & country = 45 & action = search & page = 1]

  FTP - URL [| http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftools%2feula%2fcalleula.asp%3fID%3d66222] [calleula.asp? ID = 66222 | http://eu.computers.toshiba-europe.com/innovation/tracker.jsp?file=http%3a%2f%2fsupport.toshiba-tro.de%2ftools%2feula%2fcalleula.asp%3fID%3d66222] Date last modified01/21/09CompanyToshibaTypeBIOS WideDescription 1906Version2.60 - WIN32LanguageUniversalCountryWorld UpdateSubtypewindows-basedSize (KB)

  This Bios update adds functionality to your system. {color: #ff0000}
  This Bios is only compatible for portable computers with Windows Vista! (32-bit only!) {color}

  (BIOS stands for Basic Input and Output System. This program is stored in a chip memory dead on the motherboard.
  When the computer comes on, the BIOS is launched to perform various functions to start.)
  For the detailed update information please see [Information update BIOS Toshiba | http://www.toshiba-tro.de/biosinfo]

  ModelEquium A200 (PSAE5), {color: #ff0000} Satellite A200 (PSAE6), {color} Satellite Pro A200 (PSAE7), Equium A200 (PSAE8), Satellite A200 (PSAE3), Satellite Pro A200 (PSAE4) operating systemWindows Vista 32 bit

  How do you do if your laptop does not start and if there is no action of the machine?
  I just think only technician ASP could help you maybe the motherboard (ROM chip) is not dead, but it can check only the technician for laptop