Updated poorly provided

Similar Questions

• 10.0 Firefox says it's not compatible with Norton Toolbar, and Norton Identity Safe. We recently had with upgrade to Firefox 9.0. Update Norton provided for Firefox 9.0 can be incorporated into 10.0?

  10.0 Firefox says it's not compatible with Norton Toolbar, and Norton 360 Identity Safe. We recently had with upgrade to Firefox 9.0. CAN the Norton update/solution provided for Firefox 9.0. somehow be incorporated into 10.0?

  Norton made me send updates/patch via Live Update and my 10 Firefox now compatible with Norton Toolbar and Norton 360, Identity Safe, etc.

• Windows Update keeps providing the same 6 updates again and again.

  This is the third time that I am a request for assistance with this problem.

  I have Vista Home Premium, 32-bit sp1.  HP Pavilion PC, about 2 years.  Norton Internet Security, Malwarebytes and Defender on.

  Since September 8, I was offered various updates.  I can't install the 6 following updates:
  KB967723
  KB970710
  KB968816
  KB905866
  KB971961
  KB973768

  I have install, update says that they have been installed successfully. they next day, they are offered again and if I go to view installed updates that are not there, although that still listed as installed with success in the history of the update.  Note: I do NOT receive the error messages.

  The first response to my original message does not understand my problem because he told me to uninstall the updates I had already said were not there.  I followed his other recommendations anyway (try to install the updates in the clean boot state) and it made no difference.

  The second speaker suggested reset components Windows Update (who has not made a difference) and using the system update tool (which apparently, the site said I didn't need).

  Any other ideas?  I'm trying to update my system and do not feel I can do so until that these issues would be resolved.

  Thank you

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Site Microsoft Update keeps providing an update, it already installed on my computer.

  "Add and remove programs" list shows that Microsoft .NET Framework 1.1 Service Pack @ security KB953297 update is installed with success. But I continue to be offered through automatic notification and is still appearing as a critical update on the Microsoft Update site. When I hide it, I get a warning of wicked - looking that I hid an important update and that my computer may be at risk. Why is that happening and how can I get the update of Microsoft Windows to recognize that it has already installed this update and stop offer me?

  Hello edkugler, welcome.

  I recommend trying to install it manually. Try this:

  1. download an update for Windows Installer here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  2. download the .NET Framework here Cleanup utility:
  http://blogs.msdn.com/astebner/attachment/8904493.ashx

  3 use the utility to remove all versions of the .NET Framework
  4 restart your computer

  5. download .NET Framework 3.5 SP1 from here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  6. install the package, and then restart your computer
  7. go to Windows Update and try updating your system

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update poor history with the erros stop more Explorer updated repeated unsuccessful

  Hi marilyn

  Thank God I found this site.
  I was more than 2 nights, trying to find help with my Dell Inspiron 1520 home Premiium Vista 32nbit
  I had to restore it last year that startup has frozen and lost some of my precious files and photos.
  Now, I've noticed recently that updates are rarely successful in looking at history in the updates, the latest error codes are
  error 652 and 80070652.
  I think that past failures in trying to update the series 3 pack and windows security.
  However I am at a loss were to begin to address this issue. I really don't want to restore once again, as I don't have a spare hard drive to save the files.
  Dell offers 2 GB free for 1 year, but it is not really enough.
  where I'll wait for the answer
  I sent a group of support from microsoft, I think Carolyn called but not sure.
  She asked me to copy a zip file of my history of editing, but I have heard nothing since.
  can you help me here
  my personal email is xxxxxxxx
  PS my last contact with microsoft was 10957555ID SRX srx 090327 reference
  You may know two error codes and if they refer to the Service pack and Windows security.
  I can send you the exact info, next time I'll write them down. I'm not sure switching windows and lose you right now
  many blessings and God bless America
  Anthony

  ----

• Windows Update keeps providing a status update (KB2463332) that I glazed manually

  I continued to get 65 B error code when you try to install Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) with Windows Update , so I downloaded manually from Microsoft downloads. However no one told him Windows Update , so keep it offers the update even if I have already downloaded.

  How can I Update Windows quit smoking offered the update?

  Thank you

  Try the repost in the SQL Server Setup & Upgrade forum for appropriate assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads

• Updates poor compensation

  I use Windows 7. I just try to get rid of the error on Control Panel > all Control Panel items > update the window. one with a big red circle with and X saying my 10 window could not be installed. Thanks for reading...

  Download and install the GWX Control Panel.  It's all small little freebie.  It may fix this problem and certainly will not hurt.

• How to update the name of the provider

  We have employees and suppliers. The type of provider that "'provider used to process the payment of fees in internal employees" "

  Now we have updated the existing employee environment. Now, how to upgrade the provider with the middle name. Is there a standard competitive program updated the supplier according to the employees.

  There is an emergency room that will be shared with you earlier for standard provider, but to employees type provider, you can run 'Employee-update program'.

  This program at any time update the provider name of type used in the corresponding employee records. The program updates only the provider name (the name of the employee update).

  Two following information is not automatically updated:

  1. home and Office Supplier site addresses (update of office location and address employee home)

  2. Inactive Date field for the provider and for the sites of suppliers (updated if a termination date has been entered)

  If the program updates all records, it produces a report that lists each employee who has been updated by the program provider. It lists the previous value and the value of the new, updated. The report is sorted by provider name.

  Thank you

  Oubous khalid

  NOTE: If you consider your question/problem answered/resolved, please, rate this answer as Correct or useful.

  This will help for the rest of the guests to easily find the correct answers. Thank you!

• Issue by updating the configuration of the specific data of the provider for a virtual portgroup distributed in vcenter 5.5

  Hi all

  We strive to update provider specific data in config spec for a group of distributed virtual ports, we are able to reconfigure the dvportgroup for the first time and data updates are visible in the list of mob (QuerydvsbyUUID). But the second time, if we try to update specific provider we receive error in vcenter below.

  Could not complete the operation due to simultaneous changes by another operation

  
  

  The environment we use is as follows:

  Customer vpshere 5.5 ESXi and Vcenter 5.5 5.5.

  
  

  We use Vijava to update the specific configuration of the dvportgroup seller (reconfigureDVPortgroup_Task). When we looked this error, we found below thread:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2016329

  But we try to reconfigure the dvportgroup with the root user in VCenter.

  Ask you please let us know if I'm doing something wrong.

  Thank you and best regards,

  Aristides Maximilian

  
  

  Found a similar question in the communities,

  https://communities.VMware.com/message/2342966#2342966

  The issue is a bad configversion.

  Using the last ConfigVersion (the real value of the ConfigVersion from the portgroup extraction) in ReconfigurePortgroup_Task worked well.

• Will expects G4 most camera update compromised quality for performance?

  Admins are speaking of this upcoming update. Will this affect the quality of the photos and videos much?

  I mean tweaking the camera can translate into a poor stabilization of the videos. Is this possible?

  Ah, what the message from Matt.

  Well, I guess it depends on what you are experiencing. If your device stops 5 minutes due to heating, and you can take steps to reduce the heat by lowering quality or disable image stabilization, then you must decide if you want to short videos or long videos.

  It's like consumption of gasoline in a car... go very fast, stop and go with a heavy foot, use more gas more quickly, or go slow and steady and go to a greater distance.

  Matt has been offering suggestions for people with problems.

  We don't know what any update can provide - whether or not the techniques are used. That is until the developers come up with.

• Open ZTE C apply updates without notification to the user?

  This morning, I discovered a lot of traffic consumed by OS FF (leading to the loss of about 300 euros). Update history shows that the phone set itself to date that night, and 3G has been activated.

  WTF? I thought that after reviewing the updates, the phone must warn the user first, so that they can turn on Wi - FI. Is it not the case?

  Hi Artem Tarasov,
  Thank you for your question, updates are provided by manufacturing or carrier. In the software update application, there is only an option to select the frequency. Are there options in your cell and data settings for this option?

  Also, please contact your provider for updates.

• Photosmart7520: Firmware updates

  Yet to see updates for Mavericks and must use a workaround in order to scan a document.  HP actually does support Apple software.

  Hello

  I'll clarify ion this question...

  The Relatse Date refers to the date the software is released, not the date of last update, the software is updated on the background with any version of the OS and regardless of any release of OS if necessary... in addition updates provided by hp.com windwos, many HP updates are provided via Apple Software Update because of Apple's policy...

  However, see below the exact file you are referring to, it has been updated 3 days ago.

  

  (See ftp://ftp.hp.com/pub/softlib/software12/COL51727/mp-125168-3/)

  Firmware updates were not for OS X via hp.com due to the volume of users of Mac OS X (which is still much lower than Windows), however those who are due provided for Mac uses through the printer itself, which repaired to connect to the internet updates and get, if you want to print a printer status report you will probably see a later version, and then available online, also long that your printer is connected to the network and you have chosen to perform automatic updates...

  Hope that clarifies,

  Shlomi

• Ipiel-la3 rev: 1.01 bios update (P6150NL)

  Hi I'm refurberishing a hp pavilion 6150nl desktop for one of my dear friends. The machine is running with a 5.07 bios and I see some errors in this version of the bios. Wrong order of the four ports of sata for example. The hp site says that there is a 6.09 and an update to 6.07 to Ipiel-la3 motheboard and gifts downloads sp46434 (version 6.07) and sp56794 (6.09) After launching the two files update Finally, they block the actual process saying incorrect bios your system (253). I hope that any body knows the right solution for this and thanks for responding!
  
  The full info in the motherboard is

  IPIEL-LA3 rev 1.01

  more a sticker

  CT: P AUBT 1 B 0Z XM 4 SEM
  REF: 5532234-001 (rev: B01)

  Here's the original specifications for the desktop HP Pavilion p6150nl. There are several revisions / version of the card mother IPIEL-A3 (Eureka3). Please use update BIOS provided in the Windows Vista 64-bit section of the HP Pavilion p6150nl Desktop PC Drivers & Downloads page. This update looks like it's actually a downgrade from v5.07 to v5.05 and you can not install.

  You cannot use a BIOS v6.xx on a computer that has a v5.xxx BIOS. The BIOS are not the same and are designed for different motherboards which are different versions or revisions.

  Please click the White Star of KUDOS to show your appreciation

• Broken by recent 10.9.5 Chrome browser updated

  I accepted a suggestion to update 10.9.5 for reasons of security about 2 days ago. The update was provided by the App Store.

  Since then, Chrome browser could not display PDF files. The same files is displayed correctly in the preview, Safari.

  Chrome behaves badly in 2 ways: either the PDF file translates into an empty window (white background) or the PDF fragments arise, separated by a gray background. These 2 failure modes replacing when I Quit Chrome and recharge it.

  I had a conversation with Apple support. Their suggestion is that it is a problem that Google has to solve.

  Even if I paid the Apple support, and even if this problem was precipitated by an upgrade of Apple.

  Someone else see this problem?

  This problem was solved by a telephone conversation with the Apple support.

  I dragged the Chrome app in the Applications folder to the trash (after having quit Chrome),

  then I used Safari to request a download of Chrome on the google.com site.

  New Chrome download works fine.

  Apparently the version of Chrome that I used (49.0.2623.87, around the age of 10 months), was incompatible with the latest version of 10.9.5.  The new version is 49.0.2623.108, created 2 days ago.

  The support I received by phone is infinitely better than the support of the cat.

• Tecra A7 after updating the Bios is recognized as Satellite M110

  Hello everyone.

  I'm new to this forum, and of course, I need your help.
  after update bios in my tecra a7 202 'Toshiba PC Diagnostic' shows:
  Model name: Satellite M110
  Number: PSBM0U-1234567
  SERIAL NUMBER: 000000000000000000000000000000
  Lower than that, everything is ok.

  I used bios5.10 for both parties. but when I tried to update software panda antivir only has not allowed me to open the winrar exe file.
  There was the vbs script that was dangerous in reviews of panda. I turned off Panda, but it still blocked the exe file. I decided to open the exe with winrar.
  After that, I run SA10Flash.exe. I saved the old bios and loaded a new - but there were 2 ROM files: S10PM510. ROM and S10GM510.ROM. first was younger and I decided to choose it. Maybe it was fake.

  Anyway after update in mode Bios was error with CRT or something like that and choose the option: F2 for configuration and default settings F1 charge. I took F1.
  After that, I have Satellite m110 :(

  Help, please
  Best regards
  Mirek

  Hello

  Sorry, but I don t you understand the procedure.
  Have you read the BIOS update document provided by Toshiba?
  The update of the BIOS is risky If you use a bad BIOS or bad update procedure!

  I checked out the site Toshiba driver and downloaded the BIOS for Tecra A7.
  I unzipped the 510win bios and I found the S10V510.exe file
  It is a file. You need to run!

  To me, it seems you used bad BIOS or bad procedure and therefore the cell displays a false name.

  PS: Don't worry ;) Satellite M110 is also a large notebook: D... just a joke