T2500 MFP: paper in the workplace, then unloading roller? The copying or printing it don't matter.

Similar Questions

• My Canon Pixma 250 pull the paper into the machine for printing

  My printer will not pull the paper into the machine for printing. I tried to clean the roller, it won't even. Any suggestions to fix this?

  Hello

  I suggest you to contact Canon support for assistance.

  http://USA.Canon.com/Cusa/support

• HP OFFICEJET 4500: printer problem hp 4500 doen't pull paper from the bin, hp print and scan doctor did not help

  Paper printer problem hp 4500 doen't pull of the plateau, hp print and scan doctor did not help

  Have you tried that?

  http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---K710/4181269/document/c01969913/

• OfficeJet Pro 8600 Premium: When copying from the plateau the copier will print only 1/8 of page, then stop.

  Copier is towards the top sometimes & don't print that page of bucket 1/8, Athens he spits as if this one ends. Have unplugged the power cord & reconnected. Ran scans printhead & alignment. Off all night. All the ink levels are good. Still has not corrected it.

  Print an entire page of the screen of the computer without problem. Printing problem just go flat.

  Hi @Wendy-needshelp,.

  Thanks for joining the Forums of HP Support for a solution to your problem copying.

  I understand that you use a HP Officejet Pro 8600 Premium e-all-in-one with a computer and Windows 7 when you copy from sometimes flat it will only copy and print 1/8 of the page. I would like to help.

  You mentioned having unplugged and replugged the power cord. This is something that could be done. If you can, I reset the power and try to connect the printer directly to a wall outlet, if you currently use a protector or electrical surge extention. Sometimes the surge protectors can limit the amout of the power supplied to the printer.

  

  There was an update firmware released in April, which can help your printer. You can download the update of the firmware and run it from your computer to install it on the printer. You can go to the HP Officejet Pro 8600 N911g_n Firmware download page by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• where can I find the copy paste, print, menu etc. on Windows 7?

  Windows XP had the drop top with the options, but I was not able to find it in Win7. How can I access the copy, print preview, edit, etc. on Win7?  Help, please!

  If you ask about Windows Explorer, then press the ALT key and you will see the menu with these options bar.

  You can have the remain in view by selecting organize/layout, and then select menu bar.

• How to use windows scan with the new canon printer is connected and the copy and printing, but can't seem to be able to use the technique of scan windows

  How to use windows scan with my new canon MX 922 printer.  It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks

  All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation.  If not followed exactly the probability is that the scanner will not work.

  Canon: http://www.usa.canon.com/cusa/consumer

  Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?

  J W Stuart: http://www.pagestart.com

• White box covering the copy on my page, don't know why?

  Hello

  I develop my we page one on a couple of there is a white box that covers a part of my copy. The only way to see this is to highlight this area and the copy is displayed. You can see here, http://www.denotestationery.com/denote_localroot/thankyou.html

  I tried to see if there are all AP elements have been hidden on & deleted all those unwanted.

  Anyone know why this is happening?

  "At the bottom of the code on the page, there is a lot of code Flash, calling to"testimonials.swf'

  -is it supposed to be some flash game on this page because I do not see it... that could be the problem.

• How can I add paper to the profile sizes 'print' in Illustrator App?

  Hello, when I searched for "new document profiles" - folder, I found only .ai - of the files to a volume. But there are a few sizes, for example in the profile 'print '. Where can I find the file to add custom paper sizes? Thanks for the help.

  You cannot add sizes to this menu. It is dug somewhere in the code of the Illustrator.

• Print commands will not remove the computer when printing is done.

  I have a HP 1510. When I send a print job to the printer, and you're done. work continues to stay on my Mac and I must go to the printer each time and remove the last job (which was full) until I can print another.  He did not always do that.

  Hello nhobertand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems printing.  I would like to help!

  I suggest to remove the printer from your printing system, using this document: uninstalling the software of the printer.

  Once you have deleted, I suggest to check and repair disk permissions: function to fix the permissions of all utility disk drive.

  I also run your Apple updates: OS x: Mac App Store apps and OS X update

  After the updates, I recommend reinstalling the HP Deskjet 1510 All - in - One Printer series full feature software and drivers - Mac OS X v10.6, v10.7, v10.8 v10.9.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Prevent the copy, delete, & printing

  is it possible that I can prevent my shared files to copy, delete and print of all users without having to download any software?

  Hi adil,.
  Welcome to the Microsoft community. Sorry for the delay in responding.
  I would like to inform you that you will be able to prevent copying files, deleting and printing by other users, if you have set the permissions on the folders.

  Please take a look at this article and check.

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Hope that the information provided has been helpful and let us know if you need more help. We will be happy to help you.

• Paper jams periodically with the HP1536 MFP dnf during the feeding process while in scan mode

  Someone has advise for us all by using the HP1536.    We have paper jams periodically during the process of feeding in scan mode.

  We use this machine for a 1 year without feeling the pain.

  There are a few things I would check if the printer is having recurring paper jams.

  * Make sure the paper is a paper clean and crisp

  Take all the paper in the input tray and use a flashlight to look into the status bar.  Make sure that he took not in rolls of paper entry.

  * Check the printer rear access door to check that there is no small piece of paper stuck in the rollers from the back.

  Thus, there is a document with the steps to solve the problems of paper jam.  The document can be accessed here.  Let me know how it goes.

• HP laserjet pro 200 mfp color: see the picture of the little piece of paper to all prints folded

  If I copy or print, and even though I changed all 4 toner cartridges, I still see the same exact image imposed on all printed documents, in the same place on the page.  It looks exactly like a piece of paper on the 1/4 "wide and 2" long, flattened and folded on itself.  I have a scan of a print that shows, but don't know how to get it in this post.  It does not show in a space on a page, but only when the ink hits to this place.

  It seems that there is a real piece of paper whose image is picked up every time.  It could be on the drum or another party?  How could I solve this problem?

  All of this tells me that the question is the transfer belt.  He saw many times.  You have probably a label or worse a tear in the belt that is done printing.  What happens is when a print job is sent to each toner establishes his portion of the image on the belt which moves from the back to the front and as the image on the belt gets to the rear it is transferred to the book by the transfer roller in the back cover.  Since the belt is the size of a sheet, that the fault only occurs on every other piece of paper.  If it is the material of the label or other foreign material adhered to the belt, the best option is to do a google search for the service manual and download.  Search instructions for the removal of the belt.  It is not an easy task.  If you try and there is material which adheres the belt that you will want to go to an art supply store, and you get a small container of a product call Bestine.  It is a rubber adhesive, remove the solvent.  Be very careful with the belt since traces or damage will be visible on the image.  If the belt is damaged you can buy replacement from many sources.  Good luck.

• OfficeJet Pro x476dn MFP: paper jam not clearing of documents automatic feeding

  Hi all

  I have an Officejet Pro x476dn MFP, which has an automatic paper feed paper jam. The paper is cleared, but the charger always record a jam. I followed the instructions on the printer and in the downloaded user manual from HP.com. I have also checked the sensor flag hangs freely and blew out with a can of airto feeder remove any accumulation of dust or particles of paper. I even half loaded a sheet of tissue paper on the larger particles that may stick. I also checked all other jam points have been cleared.

  The exact error I get is "paper (title)... jam. The original is stuck in the autoloader of Document (CAD). ' Open the ADF cover, remove and reload the original and then try again.  This printer is less than a year and I come to you for more information before you contact HP. I still can not print, but can not scan or copy (cannot return to the home screen). If you need made more information let me know.

  Thank you

  Mike

  HP sent a technician to replace the automatic document feeder.

• HP envy 5545: envy 5545 off paper msg on the color photo prints

  about 3 weeks.    the drivers are up to date.    total number of color prints - 8 full letter size pages.

  good color prints up to our days.

  now get the paper error message when you submit a color as photo printing.

  good black text prints and copies the right color with the copy function.

  then, only the color impression causes the out of paper message.

  tried to send printing to hp win10 laptop, hp printer app on kindle fire hdx, emailing the print job on hpeprint.

  what I tried to solve this problem:

  1 back by pulling the power plug with the printer on,

  2. reset to the factory settings of menu specifications,

  3. software checked for compatibility of paper output.

  Oddly enough, I stop the machine for 24 hours and the next day the color prints were very good.

  heat as a radiator or Sun n, t a factor;  However, the deep sleep was for several hours.

  I, m glad I have a second printer hp for backups!

  Thank you, thank you for your time and concern.

• OfficeJet Pro 8620: Officejet Pro 8620 - after software download on 4 March 2016 printer fails to detect the paper in the tray

  Hi, I downloaded and installed the latest version of the software on March 4, 2016. But after the installation of the software can not print as printer detects no paper and poster-error "on paper" message even if the paper tray is enough. The printer was working fine before the upgrade of the software. The printer is only 2 months old.

  Hi @Al2016,

  First of all, welcome on the HP Forums, as you know it is a big thank you to get help from community members! To ensure that the paper error output is not hardware related, please make a copy and let me know if it works. A successful copy determines that the problem is actually related to the software. If you can not copy, it's a hardware problem and we will focus on the material.

  If you determine that the problem is hardware related, please use the following to fix the problem: a Message displays "paper" and does not Pick Up paper from the printer. "

  In the unlikely event that you can copy do not print, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).

  The installation screen and the software opens and you can click on connect a new printer.

  Please let me know the results of your efforts and I will get back to you. If one of the suggestions I did resolve the problem, please click Accept as Solution button below so that others may see that your problem is solved! Thank you.