Updated Question & migration question

Similar Questions

• Windows 8.1 update questions about the Satellite P870 - PSPLFA

  Hello

  For the better or worse over the weekend, I downloaded windows 8.1 on a toshiba laptop (model PSPLFA p870) that was running windows 8. Graphics card is NVIDIA® GeForce® GT 630 M 2 GB with Optimus + Intel® HD Graphics 4000

  http://www.MyToshiba.com.au/support/computers/satellite/p870/psplfa-019001/specifications

  couple of questions:

  (a) I'm having some trouble to make windows 8.1 works fine on this laptop and cannot get/find new drivers on the toshiba site to properly adjust the video card.

  Any ideas how or where I can download video drivers that are suitable for this laptop?
  Too eager not to uninstall and go back to windows 8, now that I went that day...

  I have a call yesterday with microsoft yesterday which seems to go nowhere to fix one or two other things after this upgrade.

  (b) on the windows 8.1 machine my internet connection when running IE11
  seems now a little flaky and suspect that it is a matter of 11/windows 8.1 internet explore (other laptops on my wireless network running windows 7 and XP work fine and do not abandon their studies and can access all the info I can't get on the machine win 8.1) which seems to be a bit a common issues by looking at some other forums and

  (c) I can't download or open files from google docs (screen freezes right most of the way through the download) on the 8.1 update windows machine.

  Any help appreciated,
  Ken

  Hello

  Your laptop belongs to the PSPLFA series. This series was released in Australia

  The same notebook PSPLFE series is available in Europe.

  On the page of the Toshiba UE driver you will find all drivers update 8.1 Win
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

  _Importnat: _ the Win 8.1 drivers must be installed in the right order!
  Check the instructions for installation, which is available in the list of drivers too and follow exact order!

• HP ENVY 17 t-k000 CTO laptop: HP ENVY 17 t-k000 CTO Notebook PC (ENERGY STAR) Bios Update Question

  My Hp Support Assistant wants me to update my bios...

  I have two questions regarding this.

  1. the software to Flash the bios is not compatiable with windows 10.  It will be safe to run anyway? (Yes, I have installed a free update to windows 10)

  2 sp71055.exe f42.ap1 (corresponds to the file, it is recommended to run to my i7 from intel, patch notes (always never enough information) provide that it restores or that it provides the original bios.)

  My bios version connected is

  BIOS version / date f/34. 12-19-2014

  On a previous occasion, I thought I already flashed the bios and I was wondering if I need to restore to the original version, or it turns out is a bit 'off '.

  The link you have provided updated the bios with no ill affects (for now!) Thank you for your help

• BIOS update question

  Hi, I recently got a ThinkCentre M52 8113-E7U TC series

  My question is about the BIOS update.

  If I update to the latest version, this is includes all fixes from previous versions?

  I noticed, that I can not boot from USB more than flash drives 2 GB, I see it as a fix in an update of the earlier BIOS, so if I update to the latest version of BIOS will it also include this fix?

  Thank you

  Rick

  Hello and welcome,

  The BIOS updates are cumulative and include previous fixes and improvements.

  Z.

• Wifi Hotspot after Lollipop 5.0.2 update questions?

  Hi all

  I would like to know if anyone has any questions of wifi hotspot after Lollipop 5.0.2 update. I can't share my internet connection phone, hotspot is there, computer laptop to connect but I can not load Web sites. Strangely, I can use Skype, but that's all. I have the same problem with USB Bluetooth ICS and as well. Did somebody encounter this problem? Thank you.

  
  

• Richard & update questions about the Pavilion M8407

  I just put in an order for a Pavilion M8407C PC.  I ordered the PC because it is a quad-core, running a 64 bit OS and the price was so right.  I am interested in building a box fairly high-end at about 6 to 9 months, but need something now because my box 5 years just has no power for my applications anymore.

  I'll use it for modeling 3D and 3D engineering applications in the short term, and it will become a long term rendering area.

  Issues related to the:

  (1) the PC has 4 GB or RAM of 1 Gb Simms.  I'll upgrade to 8 GB, he would like to know if it is able to use 16Gb.  The OS is Vista Home Premium - is limited to 8 GB or 16 GB?  Is the limit of the 'House' or 'premium '?

  (2) the PC contains 2 360 GB drives.  Are they "RAID" ed or only 2 separate units (master & slave)?  All programs would be installed on a disk or both?  The second disk can be replaced with a larger without any OS or system of the impact?

  (3) how can be upgraded on the PC?  The operating system at any time will stop working because too many things have changed from the original HP Setup?

  Thanks for the review - I'm pretty comfortable with a screwdriver and have been building my own boxes, I'm not too familiar with the way in which 'Tier 1' PCs are set up.

  See you soon...

  Message edited by Matthew on 03/12/2008 19:49

  For someone who cares, I have rebuilt the box and here are the answers to my previous questions...

  (1) limit of motherboard memory is 8 GB.

  (2) the 2 360 GB disks are not attacked.  disk 1 is the 'OS' and 'HP install' backup and the second disc is empty.  This is ideal, because all OS and programs can be installed on the operating system drive, and the second player can be offered for data.  Easy for backups.

  (3) I have considerably improved the system.  You cannot change the motherboard, that would invalidate the Windows operating system installation.  MS wrote on OEM computers, changing motherboards is paramount to junking the old computer and requires a new purchase of OS.  I think they make exceptions for warranty cards mothers replacement - better double-check.

  I've updated...

  (A) memory.  Replaced the 4 GB (1 GB simms) with 8 GB (2 GB simms).  Simms spare parts become old.

  (B) added a 1 TB drive.  The chassis has room for 2 hard drives.  I added the third disc to his empty home of 5.25 "under the DVD drive.  I had to use a kit of adaptation and screws washers to fix the kit on the sides split to create a good grip.

  (C) replace the video card.  The NVidia 8500GT has of one taken DVI and HDMI output.  I couldn't get a good Monitor 2 out of it, because my monitors have entered VGA only.  In addition, I wanted a 1 GB of memory on the card as the programs I run use large textures so need more video of 512 MB of ram.  Replaced the with a NVidia GTS250 1 GB 8500GT.

  (D) the updates above, especialy video card, required a higher power supply.  I replaced the original 300W with a 650W unit.

  (E) the M8407C system comes with a slot to accept a "HP Personal Media Drive" unit.  Recently, I received an email from Best Buy, which featured a HP Personal Media Drive unites 750 GB on sale for CAD$ 110.  Sold. Removable data backup unit.

  To summarize, for a total investment of just under $ 1100, I created a Quad Core, 8 GB ram, disk hard system of 2.4 to pushing the 2 monitors.  The goal was to build a system capable of modeling 3D and animation for cheaper than buying the parts off the shelf.  I saved CAD $700 and have spare parts to help build a render region.

  Message edited by James on 10/04/2009 14:25

• Premiere Pro launches more after the update, question mark on the icon appears

  I've just updated Premiere Pro, and now it launches more. Only a question mark on the icon appears. The same thing happens with Illustrator, After Effects, and Photoshop. Does anyone have an idea on how to fix this?

  

  I thought about it. I just reinstalled all my apps that wouldn't launch and it works fine now. You can simply uninstall the apps screen update CC and then install here once again.

• Apex 4 or 5 zoom function and macros and update questions

  Presently, got open users in Excel via odbc tables and I want to transfer to Apex.

  1. How can I reduce the Apex down police according to the Excel zoom feature so that more data gets to the screen.   I want a LOT of data on the screen, Ive got some end users who wish to up to 100 + rows and columns of 30 +, they don't mind the size and readability, the screens are big and have macros that are constantly highlighting changes to data they are interested in what brings us to question 2

  2. how macros script to Flash color changes.

  3. how data streams constantly modify data in a table live the Apex report and apply these macros.   Refresh rate?

  IM in dev with version 4, but if a feature isn't available until the level 5 I can hold off.

  Hello

  All the above mentioned requirements can be done in one of the APEX, version 4 or 5.

  1. it is a change of POLICE CSS based on the model of HTML page, and it is supported in the APEX 4 and 5 times.

  2. for changes from flashing color macros (formulas), you should design your SQL query and insert various HTML tags in SQL query results.

  3. updating of the page tables, can be programmed using jQuery functions.

  So, basically we expect 5 APEX as your condition does not use what is explicit to APEX 5.0 /.

  Thank you

  Sunil Bhatia

• Update question Installation Manager

  Our vCenter4 server is on a 64 bit Windows 2008 Server.    I just read the VUM Administrator's guide and if you don't catch the sentence x 86 you you could install on Windows 2008 (as it says you can, but I think that means the 32-bit version).   So if I'm wrong, then my desire to install on my server vCenter Update Manager is down the tubes.    So now, I'm stuck between a rock and a hard place.   My question is: can I create a virtual machine with Windows XP SP2 and install Vmware Update Manager on the virtual machine.  I don't have any physics more servers or workstations to devote to this effect.   Or I am mistaken and I should be able to install on 64-bit hardware?

  According to the vSphere compatibility charts on page 17, he says VUM may be installed on 2008 x 64

• Satellite M40x-189: on the HARD drive and graphics card update Question

  Hi people just a few quick questions.

  1. a second hard drive can I be mounted on the cell above?... it came with a 60 GB HARD drive
  graphics mobile geforce or ati 2. can / will be mounted instead of the integrated graphics card?

  the answers would be greatly appreciated.

  Hello

  It is not possible to upgrade or replace the graphics card. The graphics card is a small chip that attaches to the motherboard. It s not the same technology as on desktop computers.
  Upgrading the HARD drive is something different. It of possible to replace the HARD drive to another. But before you replace the HARD drive, you must check if the HARD disk is compatible and if the BIOS will recognize.
  Sometimes the BIOS cannot recognize the hardest.

  Good bye

• HP Envy 15-j190nb update question

  Hi all

  I have a question about the HP Envy 15-j190nb.

  I'm looking for a laptop about a new study that I will soon begin. My eyes fell on the HP Envy 15-j190nb .

  The specs are really good for a laptop, but I was wondering if I could install an Msata SSD and Windows of her boot.

  Basically, I want to keep the 750 GB HARD drive as a device to store my data and the SSD as a boot device.

  The question is, is it possible? I searched the Internet for a bit and saw that the old Envy 15 models were not able to boot from the disc Msata, because they removed this option in the Bios. The only thing that could do the job was if you removed the preinstalled HARD drive so that the laptop would automatically detect the Msata drive as a boot device.

  Now the articles I read are from somewhere last year so I don't know if the problem I described is still there.

  I'm looking forward for an awnser

  Problems still there. You can also run Windows of the WSSD, if you configure a bootstrapper on the main drive, which is quite advanced things. I'd say you'd be better off just replace the mechanical drive with a SATA SSD.

  Fortunately, it's one of the models where the hard drive and the WSSD are easily accessible.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• RAM and GPU update questions about the Satellite A60 652

  Hello

  I have a question about my Satellite A60-62. I want to upgrade the RAM, but I do not know what kind of chip that I have to do and how that insert into the laptop.
  I also want to get a new card to my video graphics, I currently have "Radeon Mobility IGP 7000', is this possible, and the same questions again, what card do I need and how to I insert in the laptop..?

  Thanks for any help.

  Hello

  The works of A60 with PC2100 and PC2700 memory.
  The maximum is 1536 MB.
  Toshiba part numbers are:
  PC2700 256 MB PA3311U - 1 M 25
  PC2700 512 MB PA3312U - 1 M 51
  1024MO PC2700 PA3313U-1M1G

  The graphics card cannot normally be improved.

  Good bye

• Continuation of the update Question field

  It is a continuation of my previous question that was answered.  Using the rect property, I am able to move a field horizontally or vertically depending on the value of an option button (yes/no).  If so, I want to move a field to the bottom.  If not, I respect the scope of its original position.  The problem I encounter is when a user switches between Yes and no.  Specific areas are shifted downwards due to the value of the Yes radio button and when the value is changed on no, the fields remain in the new position.  Is there a way to setthe X, Y coordinates of a field using rect or rectangle?  Did some research but can not understand.

  
  Thank you

  Yes, you answer the previous thread would have been better, I think.

  Instead, to change the values of the fields by increment, you can simply

  Give them a number.

  So, if you want to set the upper-left corner of the rect to the point

  , so this:

  aRect [0] = 100;

  aRect [1] = 100;

• 3.2 APEX update questions

  Hi guys,.
  
  I need to do a review on the benefits of upgrading to 3.2 and hoped for clarification on a number of things. The functionality of the Forms provides no use to us, so the point is on the [security changes | http://www.oracle.com/technology/products/database/application_express/html/3.2_new_features.html].
  
  Declarative encrypt session state
  Declaratively specify wait times of session for the maximum idle time and the maximum duration of session
  What do these? That means declaratively they user MUST specify? Why are they useful? What were they like before?
  
  New element types create password that allow users to enter passwords without ever saving their session state - why is it useful? Saves the State of session a security problem? Why it would take up to 3.2 for it be changed then: o
  Reduce the footprint exposed by reducing the privileges required by the Oracle Application Express database account - does that mean? Foot print?
  Deactivation of the service of default data monitor - if this refers to the activity of users monitor etc then why is - this good? Looks extra hassle for the admins see what users do
  Allowing administrators to require HTTPS for administration and enforcement on development - administration and development suite applications?
  Service Administrator account passwords are consistent with a strong password policy - trying to cause me trouble when deciding on a password?
  
  Anyone know of any other addition in addition to what is mentioned here? for example new articles, reports, themes etc.
  
  Thanks for help.
  
  Mike

  Mike,

  Some of your comments seem a bit antagonistic such as "why it would take up to 3.2 for it be changed then: o ' and 'try to cause me trouble when deciding on a password?'. It is not the best way to get answers to the questions.

  Declarative encrypt session state

  For any element that can contain sensitive data, you can say APEX to encrypt it while it is stored in the tables of State meeting of the APEX. This prevents a sys_admin to query this table and entered these values. It also keeps them out of the redo log files, etc. However, you should always deal with encryption of sensitive data when you save to your tables.

  Declaratively specify wait times of session for the maximum idle time and the maximum duration of session

  You can change a parameter indicating the sessions expire after x minutes. Declarative means there are a graphical interface, do not do it in the code.

  Create item types that allow users to enter passwords without ever saving to session state new password

  Yes, saving it session state is a security problem as a system administrator may seek in the session state tables.

  Minimize the exposed footprint by reducing the privileges required by the Oracle Application Express database account

  APEX requires less privs to run to access schemas APEX gives a hacker less energy. Think of it as SYS vs SCOTT. If you broke into the SCOTT schema, there not much damage, that you could do. However, if you walked into SYS, you could do what you wanted to do in the database.

  Disabling the default data monitor function

  This isn't the user monitor section, this is a section that allows you to display the top sql, sessions, etc. Yes, it's more complicated. It's more of a hassle for me to lock my door when I leave, but I always do.

  Service administrator account passwords are consistent with a strong password policy - trying to cause me trouble when deciding on a password?

  Let me guess, your sys / system / root / admin password is one of the following values: sys, Manager, change_on_install, oracle, host, password, enter, root, qwerty, 12345? ;)

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://www.amazon.com/gp/product/0071613706?ie=UTF8&tag=tylsblo-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0071613706]
  ! http://www.Assoc-Amazon.com/e/IR?t=tylsblo-20&l=AS2&o=1&a=0071613706!

• 12.1.1 update questions

  Dear Sir
  
  We use the ebs r12 with 4 nodes OS = oul5x64 db = 10.2.0.4 12.0.6
  2 applicationtiers with queries and
  2 databaseTier (RAC)
  I did the upgrade of a single instance of 12.0.6 to 12.1.1
  It took quite sometimes to do the work (thanks for the great help of Hussein).
  My ENV production, I have a Saturday (15hrs) to upgrade and do not think that I have
  enough time to finish the job.
  My questions:
  Can I break this process (process of upgrade) so I can do it in 2 or 3 times.
  is this possible?
  Please give me some advise if it is possible.
  Thanks in advance.
  Kind regards
  Tom

  Tom,

  After all of the above conditions apply, I can turn on the system (production), then I can wait for a another week before apply the maintenance pack # 7303030 below.

  I believe that this should be OK.

  -for the 70303030 pack and help pack plus two 70303031 NLS 70303030_zhs and 70303030_zht
  It does not take a single day. Do you think I can go out for 2 times?

  You must apply NLS patches in the correct order. Apply the patch US first, and then apply the patch of translation associated for each active language in your system (AD use merge to create a fix for the NLS patches). For this step, I suggest that you apply the patch US, and then apply the NLS patch merged directly. For help of patches can be applied later at any time.

  You have a note to put the dbTier 10.2.0.4 in 11g 11.1.0.7.0 for ebs?

  Please refer to these documents.

  Note: 802875.1 - interoperability notes Oracle EBS Version 12.1 with Oracle Database 11 g 1 (11.1.0) material
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=802875.1

  Note: 735276.1 - interoperability Notes E-Business Suite R12 with Oracle Database 11 GR 1 (11.1.0) material
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=735276.1

  Kind regards
  Hussein