Updates continually offers after reboot

Similar Questions

• Updated continuously offers the same updates, which I've already refused

  I prefer to choose what updates I receive.  No, I never use "automatic updates".  I don't have Office 2007.  Whenever I turn on my computer updated tells my "new updates are available"... but it's the same update, I uncheck every time.  Is it possible to set this kind accepts updates updates thatI don't WANT OFFICE 2007 and managed to stop offering the same thing repeatedly.  It's a waste of time and if there is no way to do leave offer the same update I still refuse... SHOULD THERE BE!

  I need a frame that says: "if I rejected this particular update.  STOP ASKING ME!.

  If you do not want to install an update via windows update, right-click the update, and click Hide update

  The update you selected will be hidden, and windows appear yet again for this update notifications

  hope this helps

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Update not recognized after reboot

  I downloaded the upgrade LR6 (for my LR4) and whenever I restart my computer I have to reinstall the upgrade.  Help.  The only error message I receive when installing, it's that "Setup has detected that a reboot of the machine can be pending."  I installed as well without taking into account this decision AND rebooted my computer and try again.  Help!  (I'm not on CC)

  Hi cdustinphoto

  Get you "Ignore" and "Quit" when you try to install the application? If so, please click 'ignore' and move on. We would also like to know the version of the operating system that you use and it would be great if you could share the screenshot of the message.

• Automatic updates continually asks me to re - install; KB2518864, KB2572067, KB2539631, KB2572073, after I have already installed these over time?

  Automatic updates continually asks me to re - install; KB2518864, KB2572067, KB2539631, KB2572073 after I have already installed these updates several times? Registry of uninstalled, rebooted, cleared, tried everything but bubble gum?

  Found on road dead

  Hello

  The following article might be useful: How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update

• Stucks update Windows Server R2 2012 after reboot to 9%

  Hello

  I installed windows server 2012 R2 on IIS, SQL Server, TFS and some other products from Microsoft. After finished installing, I ran the update of windows asking to restart the installation.

  After restart, update continues up to 9%, then it stops forever!

  I didn't start with the safe mode or last good known configuration mode!

  I don't have an image restore CD for my installation.

  What should I do? How can I solve the problem or cancel the installation?

  Thanks for help.

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)

  My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.

  I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?

  P.S. I had and have the 32-bit version of Windows.

  ny6uctblu,
  Have you checked with HP on any problems with this software?  Here is a link for download of HP for the software.  You should also check that your BIOS is up to date.  I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely.  This thread can also give you some other ideas.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After downloading the updates, I can't reboot my pc, so now I can't receive updates.

  After downloading the updates, I can't reboot my pc. I code pops up that says that if I end now that I'm going to lose all unsaved data. So, I can't log out or restart without losing my updates. I can't get my active X to work now... I can't download it because it requires a reboot. Help!

  Hi stevenstar,.

  a. you just download the updates of Windows or you have installed them as well?

  1. at this point of time you can cancel the reboot and back up all your data and close all applications that are open and restart the computer to make the changes.
  Once the computer restarts view the Windows update history and check if updates are installed.
  See the Windows updates are installed
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed
   
   
  2 type eventvwr.msc/s in the address bar.

  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.
   
  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Update will not install after reboot required.

  Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

  I'm running Windows 7 x 64.

  I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

  At this point, even removing the offending program would be useful.

  Thank you for your expertise.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 2:

  You can also try to reset the Windows Update components and check if that helps.

  Click on the link provided below for more information about resetting Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Start the computer in a clean boot state and then try to download the updates manually.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Download the updates manually from the link provided below.

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

  MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=26347

  I hope this helps.

• Updates are not configured after reboot

  Cannot configure updates once I restarted the computer.

  Diamond,

  need more information:

  update which windows are you referring to? and updates did you install?

  also

  what edition of windows and service pack level Do you use? and what version of internet explore?

  what other security suite / software antivirus or antimalware software can be installed, and firewall, etc, etc.

  the only way you could tell update is causing this problem is to install them one at a time or install them all at once and remove one at a time. If you notice that one of the * security * updates caused a problem, microsoft will provide * assistance *.

  start a free support incident request windows update:https://support.microsoft.com/oas/default.aspx?gprid=6527

  the homepage of the security support consumer & solution Center microsoft update also offers support optionshttps://consumersecuritysupport.microsoft.com/ http://support.microsoft.com/ph/6527#tab3

  For more information about how to contact your local microsoft subsidiary for security update support issues, visit the international web site:http://support.microsoft.com/common/international.aspx>

• A security update (KB2584146) has been installed. It shows "installed successfully." Yet, whenever I have re-boot or run Micrsoft update, it offers this update again. Win XP SP3 (Build 2600).

  A security update (KB2584146) has been installed. After installation, it shows properly "installed". Yet, whenever I have re-boot or run Micrsoft update, it offers this update again. It shows also 'successful' in the history of my Microsaoft update. Win XP SP3 (Build 2600).

  It's an old update. Wonder why you just get it now.

  First try this...
  Click Start > run > type chkdsk/r > press OK or press the Enter key. A cmd window will appear telling you that the volume is in use and you want to plan its next reboot. Type y and press ENTER. Then restart.
  Try to install the update and check that it installed properly by doing another analysis of Windows Update.

  If this does not do...
  Download the update manually, on your desktop to the http://www.microsoft.com/en-us/download/details.aspx?id=28608.
  Click Start > run > Browse. In the Browse dialog box, double-click WindowsXP-KB2584146 - x 86 - ENU.exe. The box open term should have the path now. Add a space and an x at the end.
  Press OK or press the Enter key.
  You will get a dialog box with the path to your desktop already filled.
  After Office add a slash and the name of the folder so that we end up with something like C:\Documents and Settings\\Desktop\KB2584146.
  Go to this folder, and then in the SP3GDR folder.
  You can see packager.exe.
  Right-click to copy.
  In the box to run, type dllcache, then press on enter.
  Paste the file in there, replacing the one already there.
  In the run box, type system32, then press on enter.
  Paste the file there too by crushing the already there.
  Is there a lot of folder there. Make sure you do not paste in a subfolder. You want to the root of system32.

  Go to Windows Update and confirm that it no longer wants to install.

• updates are available after the update has been installed KB2756918

  KB2756918 update was installed successfully and displays in the records of history as having been installed several times but always offers the update in the status bar after reboot. Ive used the hotfix microsoft tool with no result.

  Hi Robert,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, that the KB2756918 update is available repeatedly on the Windows XP computer.

  -What fix - it did you run?

  I suggest you to refer to the help article and check if it helps.

  You can read the following article and check if it helps:

  Windows Update or Microsoft Update repeatedly offers the same update

  Follow the steps in Windows 7

  Note: the above link contains steps to run the scanner. When you the safety scanner, data files that are infected can only be cleaned by removing the file completely, which means that there is a risk of data loss.

  It will be useful.

  Let us know if you encounter problems under Windows in the future. We will be happy to help you.

• Bug in Vista without response: the icons of the Office Keep disappear after reboot - have to manually make it visible each time that

  Vista!

  Bug again issue: Vista Desktop Icons keep disappearing in the course and more !

  Out of nowhere, my desktop icons disappear after reboot. When I reboot, they appear for about a second and then they are gone .

  I have to manually select the view desktop items box every time after a reboot . I tried a clean reboot but nothing. By coincidence, the sidebar keep appearing EVERY TIME that I reboot my unchecking it displayed when it restarts.

  Y at - it a fix for this bug that continues to make my office disappear and make me manually make them visible?

  Help!

  Hi ad391970,

   

  The reason for updates make changes on the computer would be some conflicting third-party programs or there might be a corruption in the Windows Update components.

  I suggest that you try to install updates by disabling the third-party program conflict and check if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Perform the check and the clean boot if you have the problem.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  If the step above does not resolve the issue updates suggest that you try to reset the component of windows update and check if it works.

  Check out the link below to find out how to reset the windows component update

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If the step above does not resolve the question suggests that you check in a new user account if you are faced with a similar question. If a face similar to a new user account which means your other user account has been corrupted.

  See the link below for screw a corrupt user profile.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Hope this information is useful.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't use Firefox once after reboot my Mac, then he won't.

  After reboot or a total, followed by the setting stop running, I get use of Firefox. Once I close out of it, I can't hire back in.
  I checked and updated Firefox, no help. I am currently running Yosemite on my Mac.

  I tried a Force Quit on Firefox. Notice that the small point under the Firefox icon is missing. So, I then clicked on the Firefox icon and it has jumped up and down. Alto! I can now engage Firefox without having to restart my computer. So does that mean Firefox did not leave on its own? And why all of a sudden start. Inquiring minds. If with that I seem to be OK once more. How weird.

• Gel downloads Firefox on 1 second after, after reboot download again (safe mode)

  This is starting to happen after the update from 28 to 32 (not sure about 28).

  1. download whatever it is
  2 download is complete, the Download Manager (default or any plugin) still have this file fixed on 1 second
  3. I can't cancel, press 'x' pause.
  4. when I leave Firefox it asks, "cancel 2 downloads?
  4. after reboot it starts to download this file again. But now I can cancel it.

  http://oi58.Tinypic.com/2emzyw2.jpg

  Tried in safe mode, same result.
  Downloads are kept in the downloads.json, I can remove them manually to prevent the download again after the reboot.

  You use the version of Firefox 32.0 or the 32.0b9 who had this bug not download complete

• 29 Firefox: toolbar guard reset after reboot

  Hello

  I use Firefox 29 since the first beta, and I did several customization menu. But if I take the 'Star + favorite' icon to the next restart I find in its default location (that is, before the menu button).
  Other items added to the toolbar disappear after reboot as well.

  I tried to return to default and the problem persists.

  I also tried to delete the localstore.rdf file and the problem remains.

  The problem is somehow similar to the following

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=854226

  I prefer not to create a new profile since I many extensions, so I ask if there is another file, containing these customizations, what I could try to remove it.

  Thank you.

  Underpass, I'm sure you're problem is caused by one of your modules.

  Can you try to pin-point the offending module? I would suggest the following method:

  1. Cut the half of your add-ons (disable in the Add-ons Manager) and restart Firefox.
  2. If the problem is still there, turn off half of the other add-ons and restart Firefox.
  3. Continue step 2 as long as you can reproduce the problem.
  4. If the problem in not there anymore, the offending module is among the list you just disabled and should be easier to find.

  Thank you!