Updates for Vista fail and return. It's really frustrating! KB2833941, KB2868626, and KB2962872

Similar Questions

• Updated for Vista Ultimate and don't have a product key. How can I activate?

  can not activate

  I've upgraded to vista ultimate from vista and update at any time doesn 'thave product key. It says I have to enter the product key to activate how to activate

  Hello

  Windows Anytime Upgrade is no longer available for Windows Vista.

  See: http://windows.microsoft.com/en-US/windows-vista/windows-anytime-upgrade-frequently-asked-questions

  See also:

  How to identify, locate, and replace a product key: http://support.microsoft.com/kb/811224

• Friends call me to play games online successfully. Then I installed updates for Vista "recommended" and now, none of them can connect to me

  I used http://www.canyouseeme.org/ to check that my port, which is configured to forward correctly, is not accessible.  I took down my firewall, same problem.

  Hello

  Better, do a system restore:
  http://support.Microsoft.com/kb/936212

  Good luck!

• Window update for Vista didn't and now it stops when I use all the features.

  I did my update for Vista window and now it stops when I use all the features. I use Google Chrome and the recent update adds Bing Bar.

  Hi Izzy2222,

  ·         Did you put any power on the computer plan option?

  I recommend to open Event Viewer and find the exact description of the error. The newspaper of errors in your next post relay.

  See also: What are the information contained in the logs of the event (Event Viewer)?

  In the meantime, follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know the results.

• The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490).

  The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.

  
  

  I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• Unable to get security updates and a critical update for Vista (KB2541763), to support for Vista. (error 80070005)

  original title: failed to get the security updates and critical update for Vista (KB2541763), to load for Vista

  All the other updates, including security, for other Microsoft software will open (WIndows Explorer, Microsoft Office, etc.).
  This seems to have started after downloading and installing McAfee on 6/17. Updates have been well before that date.
  Service Pack 3 is installed.
  All updates important/critical loading fine up until this date.  I have 11 updates essential and important to load.
  I totally removed McAfee from the PC, including the stage you purchase from McAfee for cleaning the system. Now run the ESET security suite.

  Hi Dan,.

  Thanks for posting your question in the Microsoft answers Forum. Follow the troubleshooting steps in this thread for your problem with the 80070005 error. Alternatively, you can try to install the update in small groups to see if that fixes the problem.

• Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

  Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

  See the section "How to get help", for example, http://support.microsoft.com/kb/927978

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows wants to install updates for Office 2002 and Office XP and I have VISTA and Office 2007

  I have read many topics and I can't seem to find the same problem I have.  I use Windows VISTA Home Premium (32 bit) for awhile and since June 30, 2009, I had bad download and install Windows updates.  I installed updates today, but I continue to be invited to run/install updates for Office XP and Office 2002 (currently about 9).  I used VISTA and Office 2007 for some time.  I believe that I have IE 7 and SP2.  I appreciate any help I can get to fix this.  Thanks in advance for your help.

  Hello SKYisDlimit,

  After my communication to you, I continued to the Internet using the search.  I was finally able to locate the file you suggested (Msmapi\1033) he successfully Office Pro 2003 Outlook running.  Thank you!!

  I don't know if you're alone in asking the question following or not, but I'm still able to re - install Microsoft Office Professional 2007.  I uninstalled after information I received of Santosh, and it has the re - install Office Pro 2003 (which have been upgraded).  Now when I try to reinstall 2007 (bought in February 2007), I keep getting the following message: "Setup is unable to find a version of Microsoft Office on your computer.  If Office is installed on a disk or a network share, click the buttun browse to select the appropriate disk or sharing.  If you have a version of MB on a CD, insert the CD into your CD-ROM drive, and then click the Browse button to select the appropriate drive. »

  I tried several times without success.  Of course, I use Office 2003 Pro, so it's on the computer.  If you are unable to solve this problem, please either direct to the appropriate area or tell me who I need to contact.  Once again, thank you in advance for your help.  Needless to say, it's more frustrating!

  Katydid2

• Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240.

  Drivers Vista MSN

  Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240. Updates are perhaps the cause of this problem? If this isn't the case, please let me know if I get the problem somewhere else.

  Hello

  Your question is could a Windows Update may be charged a wrong Brother Printer Driver? Yes.

  One way to know is to look in the history of updates to see what has been installed and uninstall then one that seems incorrect.

  If you are an update of the Microsoft printer driver note that Microsoft updates pilot equipment for other manufacturers are not normally updated.

  Here's how to uninstall specific updates;

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  If an update is the problem and stop it reinstall > list of updates to install > right click on the incorrect update > UAC prompt > and then click Hide.

  See you soon.

  p.s. Always get the latest updates of the driver from the hardware manufacturer.

  Also would it be a good idea if above does not work to download the last direct Brother printer driver; If necessary reinstall your printer...

  http://www.brother-USA.com/downloads/default.aspx

• My computer installs the automatic updates for Vista Home Premium, but fails to set them up.

  original title: Microsoft updates

  My computer installs the automatic updates for Vista Home Premium, but fails to set them up. I'll through in circles, trying to figure out what the problem is. Everything was fine until a week ago. Help please

  Thanks for trying to help. It was too complicated for me to fix, so to get help in. happy to say now, all right.

• Update error... I tried to update for the month and each time it fails

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  I tried to perform updates for the month and each time it fails.  I get the same error message... Code 646 WIndows has encountered an unknown error.  I did troubleshooting and you are unable to find assistance.  I don't know much about the workings of the computer, but I know that I should be able to perform these updates.  I think I need it too.  I have 9 at this stage that it cannot load.  Help, please!

  This link leads to a response from Bobby Mi, moderator.
  Date: July 6, 2010
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  Bobby Mi response will lead to this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/2258121

  Hope this can help solve your problem.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• KB25844146 & KB2620712 are updated for Vista - "isntalled windows is not updated version"

  original title: KB25844146 & KB2620712 are updated for Vista. Fails to install each timed

  Updated repeat myself that kb25844146 & KB2620712 are updates for Vista Home Premium fails to install every time. Bulletin says its for XP. Installation downloaded and tried of puter is back with "windows installed is not version update". Have Vista home Prem SP2/32-bit. Using trend micro security. Help?

  Hello

  1 did you change on your computer?

  2. how you try to install this update?

  Method 1:

  I suggest you to reset the windows update components and check.

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  I also suggest you to see link and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  I also suggest you perform the clean boot and then try to install the updates and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

• I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

  I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

  Try the following. It seems yo may have to let the battery drain is completely:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• error code 80070673 for windows update for vista

  error code 80070673 for windows update for vista

  Hello Jwisetoyo,

  Thank you for your message.  Please click HERE for a possible solution to your problem.

  See you soon

  Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.