Updates listed below was updated, complete and come again to reinstall. History shows that it has been done.
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system. Details...
A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system. Details...
Hi KathyVassiliou,
Please take a look at the thread similar here with a solution as possible.
I hope this helps!
Tags: Windows
Similar Questions
-
Update KB2446708 shows that it has been installed twice. How to fix?
Update KB2446708 shows that it has been installed twice. Advanced Windows care says that it must be installed. How can I fix it?
Hi terraphi,
If you are prompted repeatedly to install KB2446708 then suggest that you follow the steps in the material provided and check if that helps.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
If you are prompted to install KB2446708 during the installation of Advanced Windows Care then uninstall the KB2446708 to see installed updates. Follow the steps below:
1. click the Start button, select Control Panel, click programs, and then click programs and features.
2. click on view installed updates.
3. click on KB2446708 and then click on uninstall.
After uninstalling the KB2446708 manually to install the KB2446708 from the link provided and check if it helps.
-
The number of update: KB2600217
KB2487367, KB2468871, KB2656351, KB2533523.
I'd appreciate any help possible as I have tried everything I can find to sort except turning off update notifications, and I don't want to do that.
These updates are all for net framework 4, some are recommended, but some are significant (this is what he said in any case) do I need net framework 4 on my PC? Because I can remove it if necessary?
Thank you
In many cases repair .NET Framework 4 is sufficient to correct the corruption but in some cases, uninstall and reinstall .NET Framework 4
(Ref: http://support.microsoft.com/kb/976982)
Windows 7 and Windows Vista users follow these steps to repair the installation of .NET Framework 4:
- Close all running applications.
- Click Start, type Uninstall in the Start Search box, and then click uninstall a program.
- Double-click Microsoft .NET Framework 4 Client Profile.
- Select repair .NET Framework 4 Client Profile to its original state , and then click Next.
- Repairs completed, click Finish.
- Click restart now to restart your computer.
- Install the latest Windows updates by clicking the Start button, type Windows Update in the Search box, and then click on Windows Update.
-
prompt to keep the same windows update over and over again
Hello
I've been doing the following updates over and over again. They do not seem to have been installed on my XP Pro SP3 machine, although she said that she had installed the updates.
A security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
A security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)Anyway, I tried to stop the updates automatic and pieces through command promt back but to no avail.
If I write what is in windowsupdate.log
2012-02-03 15:37:22:234 1408 548 to receipt install 2 customer approval updates
2012-02-03 15:37:22:234 1408 548 TO THE #.
2012-02-03 15:37:22:234 1408 548 to THE # START # to THE: install updates
2012-02-03 15:37:22:234 1408 548 TO THE #.
2012-02-03 15:37:22:234 1408 548 to THE # Initiating manual installation
The approved updates # in THE 2012-02-03 15:37:22:234 1408 548 = 2
2012-02-03 15:37:22:312 1408 ad8 Agent *.
2012-02-03 15:37:22:312 1408 548 TO THE<## submitted="" ##="" au:="" install="" updates="" installing="" updates="" [callid="">##>
2012-02-03 15:37:22:312 1408 ad8 Agent * START * Agent: installing updates [CallerId = AutomaticUpdates]
2012-02-03 15:37:22:312 1408 ad8 Agent *.
2012-02-03 15:37:22:312 1408 ad8 Agent * updates installed = 2
2012-02-03 15:37:22:359 1408 ad8 Agent * title = update of security for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)
2012-02-03 15:37:22:359 1408 ad8 Agent * UpdateId = {8914D187-D0C7-4C7E-9824-CFCFF4C8377D}.104
2012-02-03 15:37:22:359 1408 ad8 Agent * updates the 2 beams:
2012-02-03 15:37:22:359 1408 ad8 Agent * {150273BC-82B4-43D6-AE3D-C289D94CBC21}.104
2012-02-03 15:37:22:359 1408 ad8 Agent * {F1B1B1E1-2B22-4445-8A9C-5924BF945D32}.104
2012-02-03 15:37:22:359 1408 ad8 Agent * title = update of security for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
2012-02-03 15:37:22:359 1408 ad8 Agent * UpdateId = {DCB443DD-76E6-47A3-8BDE-F0EBFA112190}.101
2012-02-03 15:37:22:359 1408 ad8 Agent * updates the 2 beams:
2012-02-03 15:37:22:359 1408 ad8 Agent * {45418357-0883-4EE3-98C6-CC93460D35B5}.101
2012-02-03 15:37:22:359 1408 ad8 Agent * {A9AD85CC-1F2B-4F55-A426-66632F2A6147}.101
2012-02-03 15:37:25:484 1408 ad8 Manager to try to create a remote process manager as PBJ-UNIT3\user in the session 0
2012-02-03 15:37:25:781 1408 ad8 DnldMgr preparation update for install, updateId is {150273BC-82B4-43D6-AE3D-C289D94CBC21}. 104.
2012-02-03 15:37:25:859 2920 e7c Misc = logging initialized (build: 7.4.7600.226, tz: + 1100) =.
2012-02-03 15:37:25:859 2920 e7c Misc = process: C:\WINDOWS\system32\wuauclt.exe
2012-02-03 15:37:25:859 2920 e7c Misc = Module: C:\WINDOWS\system32\wuaueng.dll
2012-02-03 15:37:25:859 2920 e7c Manager:
2012-02-03 15:37:25:859 2920 e7c Handler: START: Manager: command line installation
2012-02-03 15:37:25:859 2920 e7c Manager:
2012-02-03 15:37:25:859 2920 e7c Manager: installed updates = 1
2012-02-03 15:37:26:500 2920 e7c Manager: installation of complete command line. Return code = 0x00000000, result = Succeeded, reboot required = false
2012-02-03 15:37:26:500 2920 e7c Manager:
2012-02-03 15:37:26:500 2920 e7c Handler: END: Manager: command line installation
2012-02-03 15:37:26:500 2920 e7c Manager:
2012-02-03 15:37:26:625 1408 ad8 DnldMgr preparation update for install, updateId is {F1B1B1E1-2B22-4445-8A9C-5924BF945D32}. 104.
2012-02-03 15:37:27:437 2920 fc0 Manager:
2012-02-03 15:37:27:437 2920 fc0 Handler: START: Manager: command line installation
2012-02-03 15:37:27:437 2920 fc0 Manager:
2012-02-03 15:37:27:437 2920 fc0 Manager: installed updates = 1
2012-02-03 15:38:01:062 2920 fc0 Manager: installation of complete command line. Return code = 0x00000000, result = Succeeded, reboot required = false
2012-02-03 15:38:01:062 2920 fc0 Manager:
2012-02-03 15:38:01:062 2920 fc0 Handler: END: Manager: command line installation
2012-02-03 15:38:01:062 2920 fc0 Manager:
2012-02-03 15:38:01:093 1408 a80 to THE > # RETURN # to THE: installation update [UpdateId = {8914D187-D0C7-4C7E-9824-CFCFF4C8377D}, successful]
2012-02-03 15:38:01:156 1408 ad8 DnldMgr preparation update for install, updateId is {45418357-0883-4EE3-98C6-CC93460D35B5}. 101.
2012-02-03 15:38:01:203 2920 768 Manager:
2012-02-03 15:38:01:203 2920 768 Handler: START: Manager: command line installation
2012-02-03 15:38:01:203 2920 768 Manager:
2012-02-03 15:38:01:203 2920 768 Manager: installed updates = 1
2012-02-03 15:38:01:296 2920 768 Manager: installation of complete command line. Return code = 0x00000000, result = Succeeded, reboot required = false
2012-02-03 15:38:01:296 2920 768 Manager:
2012-02-03 15:38:01:296 2920 768 Handler: END: Manager: command line installation
2012-02-03 15:38:01:296 2920 768 Manager:
2012-02-03 15:38:01:328 1408 ad8 DnldMgr preparation update for install, updateId is {A9AD85CC-1F2B-4F55-A426-66632F2A6147}. 101.
2012-02-03 15:38:01:718 2920 e7c Manager:
2012-02-03 15:38:01:718 2920 e7c Handler: START: Manager: command line installation
2012-02-03 15:38:01:718 2920 e7c Manager:
2012-02-03 15:38:01:718 2920 e7c Manager: installed updates = 1
2012-02-03 15:38:06:093 1408 aec report REPORT EVENT: 2012-02-03 + 1100 1 183 101 15:38:01:093 {FEACDBA5-005E-4161-A8A5-3E61D7A9E85B} {8914D187-D0C7-4C7E-9824-CFCFF4C8377D} 104 0 AutomaticUpdates success content install Installation successful: Windows successfully installed the following update: a security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352)
2012-02-03 15:38:41:593 2920 e7c Manager: installation of complete command line. Return code = 0x00000000, result = Succeeded, reboot required = false
2012-02-03 15:38:41:593 2920 e7c Manager:
2012-02-03 15:38:41:593 2920 e7c Handler: END: Manager: command line installation
2012-02-03 15:38:41:593 2920 e7c Manager:
2012-02-03 15:38:41:640 1408 a80 to THE > # RETURN # to THE: installation update [UpdateId = {DCB443DD-76E6-47A3-8BDE-F0EBFA112190}, successful]
2012-02-03 15:38:41:671 1408 a80 at THE facility call ends.
2012-02-03 15:38:41:671 1408 ad8 Agent *.
2012-02-03 15:38:41:671 1408 ad8 Agent * END * Agent: installing updates [CallerId = AutomaticUpdates]
2012-02-03 15:38:41:671 1408 a80 to # WARNING: installation of the calls, reboot required = no, error = 0 x 00000000
2012-02-03 15:38:41:671 1408 ad8 Agent *.
2012-02-03 15:38:41:671 1408 a80 in THE #.
2012-02-03 15:38:41:671 1408 a80 to # END # in THE: installation of updates [CallId = {E8C8152C-8888-443C-A2C9-CD9A79AE656D}]
2012-02-03 15:38:41:671 1408 a80 in THE #.
2012-02-03 15:38:41:671 1408 a80 in THE installation complete for all calls, DO NOT reboot needed
2012-02-03 15:38:41:671 1408 a80, the phase of installation to THE adjustment to THE planned for 2012-02-03 16:00
2012-02-03 15:38:46:640 1408 aec report REPORT EVENT: 2012-02-03 + 1100 1 183 101 15:38:41:640 {C193FC62-E029-4AD3-A6F6-8482B5EFB43B} {DCB443DD-76E6-47A3-8BDE-F0EBFA112190} 101 0 AutomaticUpdates success content install Installation successful: Windows successfully installed the following update: a security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
2012-02-03 15:38:46:750 1408 930 (non-interactive) Offline detection trigger
2012-02-03 15:38:46:828 1408 628 IN THE #.
2012-02-03 15:38:46:828 1408 628 in THE # START # to THE: research updates
2012-02-03 15:38:46:828 1408 628 IN THE #.
2012-02-03 15:38:47:546 1408 628 TO THE<## submitted="" ##="" au:="" search="" for="" updates="" [callid="">##>
2012-02-03 15:38:47:546 1408 ACS Agent *.
2012-02-03 15:38:47:546 1408 ACS Agent * START * Agent: finding updates [CallerId = AutomaticUpdates]
2012-02-03 15:38:47:546 1408 ACS Agent *.
2012-02-03 15:38:47:546 1408 ACS Agent * Online = No; Ignore download priority = No
2012-02-03 15:38:47:546 1408 ACS Agent * criteria = "IsHidden = 0 and IsInstalled = 0 and DeploymentAction = 'Installation' and IsAssigned = 1 or IsHidden = 0 and IsPresent = 1 and DeploymentAction = 'Uninstall' and IsAssigned = 1 or IsHidden = 0 and IsInstalled = 1 and DeploymentAction = 'Installation' and IsAssigned = 1 and = 1 RebootRequired or IsHidden = 0 and IsInstalled = 0 and DeploymentAction = 'Uninstall' and IsAssigned = 1 and = 1 RebootRequired."
2012-02-03 15:38:47:546 1408 ACS Agent * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
2012-02-03 15:38:47:562 1408 ACS Agent * Search Scope = {Machine}
2012-02-03 15:38:47:593 896 868 CltUI client got new directive = 'Shutdown', serviceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, return = 0 x 00000000
Event handle to THE receipt 2012-02-03 1408 628 15:38:47:609I write this subject of the question, he (the yellow shield with exclamation mark in the middle) happens again.
Any help would be greatly appreciated.
Thank you
Try to install some other updates and then reboot your PC and run the update again. If the problem has not been resolved, and then run this tool:
-
Original title: Windows 8
Hi guys I had a problem like this. When I updated my windows 8.1 to 10 somehow I could not update completely and I lost my administrator account. Icreated new account and try to connect, but still he said that I had been registered in the temporary profile yet, I had the chance to use. When I disconnect and try to connect again it stay on the page of waiting please two days stating at the time that failure to configure windows updates. Now I can't connect at all for the last three days. Help me guys.
Hello
Thanks for posting your query on the Microsoft Community.
According to the description, you can not connect because it is blocked to wait please and you also get error message failed to configure windows updates.
I would be grateful if you can provide us with the following information to help us better understand the issue:
- What is the full error message / error code that you get on your screen?
This problem may be due to updates pending.
I suggest you to follow the below methods and check.
Method 1:
I suggest you to disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.
If this solves the problem, then add devices one by one after the other until you discover the piece of hardware causing the issue. Then we can update driver for this particular device.
If the problem persists, try Method 2,
Method 2:
I suggest you to check if you are able to connect mode safe mode by using the following commands.
Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
Follow these steps to start the computer in safe mode.
a. boot from the DVD of Windows 8.
b. click on repair your computer.
c. click Troubleshooting, and then select Advanced Options.
d. Select the prompt option.
e. Once you open the command prompt, enter the following command and press ENTER.
Bcdedit/set {bootmgr} displaybootmenu Yes
One time completed, please restart your computer, then press F8 to access screen on startup, then press F4 or 4 to enter Safe Mode.
Check if the problem persists in safe mode.
If the problem does not persist in Mode safe mode, then perform a clean boot in order to check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
How to solve problems using the clean boot in Windows: http://support.microsoft.com/kb/929135
Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.
If the question did not resolve, try Method 3,
Method 3:
I suggest you to check if there is no update pending Windows needs to be installed.
If so, then I suggest you to install the update and check if it helps.
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Automatic update arrived and installed himself, but then told me that it was incompatible with my Mac version: 10.5.8. Firefox version 3.6.26 is now about it. It seems to work even. Y at - it's going to be a problem or should I ignore this message?
If I need to can replace it where I get an older version?
Thank youFirefox 4 versions and later, do not run on a PowerPC Mac and require at least OS X 10.5 and an Intel Mac.
The latest support for your operating system version is 3.6.26 , you are fully updated.
For more information, see:
Firefox 3.6 system requirements
Firefox 10 system requirements
[For older Mac that are not supported in versions of Firefox 4 +, if you want, try TenFourFox for PowerPC currently running Mac 10.4.11 and 10.5.8]
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/
https://code.Google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
Thank you
Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.
-
Vista installs updates over and over again
My PC keps install the same Microsoft updates over and over again whenever I stopped him?
My PC keps install the same Microsoft updates over and over again whenever I stopped him?
Hi Ragui,
Look at this link: http://support.microsoft.com/kb/910339 it may help you solve your problem.
Please your comments if works.Andrei Andrade TFC, TCSP, including, MCTS70-620 MCP70-290
-
My work PC operating system has been recently updated from Windows XP to Windows 7. An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done. I registered it again online but everytime I open an Adobe Acrobat file, a message appears that I need to register even if it is already registered. What can I do to stop this?
Hello
Acrobat 7 is not supported and an older version of Acrobat.
Also, it is not compatible with Windows 7.
This could be the reason why you are faced with it.
Please see this link.
Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3
Concerning
Sukrit diallo
-
Windows Media Center could not update Playready after that kb3004394 has been installed.
Windows Media Center could not update Playready after that kb3004394 has been installed. I then uninstalled kb3004394 and tried everything I can find on the web for difficulty playready including this procedure
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/PlayReady-update-was-incomplete/8119d0a8-6106-489D-B5CB-4979a6a9ad0e
and this procedure
http://www.hydrous.net/weblog/2012/08/20/resetting-PlayReady
Nothing worked and I'm pulling my hair out. I use WMC with an HDHomeRun and a map of Time Warner cable. This facility worked well for more than a year before installing this update. The machine is a Dell XPS 8300 running windows 7 SP1. I'm unable to watch all channels protected by DRM and I lost all my legally registered content. It is a disaster and cost me 30 hours and counting. Anyone have any ideas?
I don't know your problem, but 3004394 has caused a lot of problems for a lot of people - https://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/windows-update-kb3004394-issues/ace25277-7f65-4486-bc44-c1b106907a18.
Microsoft have apparently released an update of replacement/deletion for it - https://support.microsoft.com/kb/3024777?wa=wsignin1.0
But to a few other posts on this forum, it seems to fix everything for everybody. If all goes well it can help you.
If not, allows to see what MS themselves have to say.
-
I did the most recent iOS 10 updated, just heard on the news that Yahoo has been hacked. I changed my password to Yahoo mail but can't find the field to change the password on my devices. It is simply not there, what is happening?
For some reason any change automatically if change you it online. Today, I changed my password through my office and I went to change the mail and she had already changed.
You can try to delete your account your unit off and add it again.
-
Good night bought a pack and your lightroom photoshop lightroom price 12,90 EUR has been scaricoto, photoshop, because I just downloaded the trial version? I thought it was all inclusive! like the previous version. The version I had before that I do not know why it stopped working... you know the answer? Thank you
Your subscription to cloud shows correctly on your account page?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
If you have more than one email, you will be sure that you use the right Adobe ID?
.
If Yes
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10. I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium. What should I do to get loaded and enabled on my computer?
That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.
Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5
http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html
-
I completely deleted Firefox and deleted all the files. After installing fresh Firefox, Firefox sees that it has been installed previously? "Looks like you have reinstalled Firefox. Want us to clean for a fresh experience and as new? »
I uninstalled Firefox (so-called) "completely" using the guide here: https://support.mozilla.org/en-US/kb/uninstall-firefox-from-your-computer
Why the new installation of Firefox recognizes that it has already been installed? Uninstall tool to uninstall Firefox COMPLETELY. As it is, can someone tell me what is the appropriate procedure for removal COMPLETE?
All right, thank you in any case obtained.
I removed all of these places:
-
-
C:\Program Files (x 86) \Mozilla Firefox C:\Users\Chris\AppData\Roaming\Mozilla\Firefox C:\Users\Chris\AppData\Local\Mozilla\Firefox -
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Mozilla Firefox.lnk -
HKEY_LOCAL_MACHINE\Software\Wow6432Node\Mozilla\Firefox HKEY_CURRENT_USER\Software\Wow6432Node\Mozilla\Firefox 50.0 Firefox HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla (x 86 en - us) -
ApplicationIcon HideIconsCommand ShowIconsCommand ReinstallCommand Installation directory PathToExe PathToExe Components Plugins ApplicationIcon HideIconsCommand ShowIconsCommand ReinstallCommand Mozilla, please take note and to integrate them in your current "uninstaller" tool. Thank you.
-
Currently, I have Windows 7 and had to buy Windows 8 for the school. I tried downloading it several times, but when she writes the check, it is said, "Download unsuccessful. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »
I don't know what to do.
Original title: download Windows 8 Windows 7
Hello Travis,
Thanks for posting your question on the Forums of community of Microsoft.
To better understand the issue please help us with these questions.
from which site you try to download Windows 8?
b. what browser do you use to download?
c. you try to download a full version or update?
d. you run the upgrade wizard before trying to download the Windows 8?
This problem usually occurs due to the installation of Web the contents of the folder in the system. So, now, I you suggest to rename or delete the installation folder to the following location and then try to download Windows 8:
C:\Users\
\AppData\Local\Microsoft\Web install See also the link mentioned to follow the correct steps before and during the installation of Windows 8 below:
How to upgrade to Windows 8Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of upgrade of the OS.
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
-
I have a subscription to CC Photoshop and Lightroom. I bought a new Apple MacBook Pro last week. I had Adobe shadow my computer to download both programs on my computer. Downloads succeeded, but now my problem is that nothing has been transferred? I have photos and user presets on my old computer in lightroom, but nothing transferred. Also, it is show on this computer I have 5 Lightroom, but team support pulled up to my account today and downloaded lightroom cc if it still means something. I am a new photographer and green not computer savvy. I am totally confused with no further assistance from Adobe.
It's pretty normal. All your images are always on your old computer and you transfer those to your new computer. Just transfer them as well as your catalog file and opens in Lightroom on the new computer. For presets, you need to transfer files, preferences and presets that are hidden in folders hidden on the Mac. Therefore, with the Mac, when I update the machines, I'm usually just restore from a backup on the new computer (very easy with Time Machine backups) or directly from the old machine (a little harder). This will give all files and settings and the software installed on the old machine immediately and you can just continue. Is not something that Adobe can really help you with either said by the way, but you might have someone from the Apple Store help you with that, if you are not comfortable with moving files to a new computer.
Cc of Lightroom is simply a version update of Lightroom 5. CC requires a monthly subscription that pay you apparently. You did not use the software you pay for if you use 5 Lightroom on the old machine.
Maybe you are looking for
-
How can I enter my Office Mozilla with a password?
I use Mozilla my access to the internet portal. Since I have some personal "bookmarks" can I use a password to enter Mozilla from my desktop, but I don't know how to do it. I use Google as my home page. Thank you.
-
Cannot hear the people in the Group calls
Then, when I call people individually, I can hear them and they can hear me and everything is normal, but when I have a group they can hear join/call me but I cannot hear them. Any suggestions? Skype for Windows V7.18.0.112
-
Unable to ask the Apple support erased because Macintosh HD, with result the no boot disk
As I had to erase my Macintosh HD because it was not able to fix my Mac drive has removed in turn the startup disk. I'm running in recovery mode and tried to download Lion but "temporarily unavailable" message. I can't ask Apple online support suppor
-
Error-200478 - specified operation cannot be performed when there is no channels in the task
I write a task in NiDaqmx read 8 thermocouples 2 9222 or 4 thermocouples of a NI 9223 modules. Under Source of CCM I entered the channel and specified a type K thermocouple connected to a NI 9219. All modules are located in the same chassis of cDAQ91
-
Windows update is not download and install Service Pack 1, 2 3
Did a fresh install of Vista 32 bit Home Premium on Acer Extensa 4420. After repeatedly run Win Update and installation of more than 60 update updates said that I was aware. HOWEVER, SP - 1 was not detected as missing but was necessary for the other