Updates to Windows not updated going just by the movements of update

Similar Questions

• I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  I bought the new iphone 6 s more and I have not configured, I just opened the phone and charged, but after some time it stop by itself, is this normal or I have a problem with my phone?

  You need to activate the phone. There is nothing that the phone can not be activated.

• Windows 7 Build 7601 this copy of windows not genuine error appeared on the office 20 minutes ago.

  Error 'Windows 7 Build 7601 this copy of windows not genuine' appeared on my computer laptop office 20 minutes ago. This software is authentic. She started to date, with laptop, gateway. I had this installed for more than a year and its use. It's the first, this message appeared.

  What can I do to get rid of the message AND make sure I'm getting good updates of Windows and other forms of support that goes hand in hand with genuine Windows software?

  Thank you in advance.

  Hello wolfields,

  Check out this link: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-is-showing-as-not-genuine/cbd43297-0e4d-458c-8487-9168c4cd668d

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Program windows not fully displayed - cannot see the buttons

  Problem:

  1. After selecting the program HP PC Recovery CD/DVD Creator, the Welcome window appears but is not displayed entirely.  The portions and right at the bottom of the window are transparent.  I don't see other buttons that I should be able to select.  I also try to use the program end button (red box with white x) located on the top right of the window, and the program will not end.  To close the program, I have to finish the process via the Windows Task Manager.

  2. when the HP automatic update alert window returns to the part at the bottom right of my office, letting me know that updates are available and to ask if I would like to install the updates, the alert window is not completely visible.  I don't see other buttons that I should be able to select.

  3. in both cases (1 and 2), if I place my pointer over the window and select Enter then the program will proceed to the next step.  If a pedagogical (pop-up) window on the top of the main window of the program, I am able to see this pop-up window in its entirety, and then select options as needed.

  Question: What is the cause?  How can they be corrected?

  Thanks in advance for any input.  Please see information system below.

  -Angela

  ``````````````````````````````````````````
  old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
  new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM

  Hello

  It is a known issue and the difficulty there is in the link below.

  http://support.HP.com/us-en/document/c00595956

  Hope this helps for you...

• How can I change the content of the drop-down list window which shows after JUST click the button START

  The window appears after using the right click on the mouse. Before I had a Tech. remove a Trojan visuses the window showed just find, Explorer, Delete, now it showes such articles that take control, Google, download of virus total.etc.  So, how can I get rid of items that I don't want?

  The menu that appears when you right-click is called the "context menu", and various third-party applications can install entries here.  You have several choices regarding the removal of these entries:

  1. If you can determine what application is involved, you can see if the application has a configuration or menu options enabling to customize what appears in the context menu.

  2. If you can determine what application is involved and that you no longer want or need this app, you can uninstall it.  Praseetha K is close, but no cigar gets.  Virus Total is an online service that checks uploaded for viruses, files.  Virus Total also offers a "upload" allowing you to download suspicious files by right-clicking (see http://www.virustotal.com/advanced.html).  You can decide if you want. If this is not the case, simply uninstall it.

  3. If you are unable to determine what application is involved, or you want to keep the application but it does not offer a configuration without the context menu item, download ShellExView and you will probably be able to go to the bottom of things pretty quickly.

• How can I move a sticky notes. When I choose the move option nothing happens

  I would like to publish sticky notes but they stack above the other.  When I try to move them, I get the icon white arrow with four points, but nothing happens?

  Hi George,.

  You should be able to go to the top of the Sticky Note and left click (and hold) then drag the sticky note to the new location. If it still not move there may be a setting in your mouse which will need to be reset to zero by default.

• A little black box appears at the top left of my Windows 7 login screen just before the Welcome screen and the stalls password when I try to enter. HELP PLEASE?

  Whenever I turn on my computer for a week, I try and put my password and after the first or the second key it stalls. He again entered my password, but I don't see whether registration in the password box. I also have a little black box that is slightly smaller than the size of a post-it note in the top left area of my screen for half a second, then it disappears and continues to my home screen and office as usual.

  I had this problem for about a week, and I can't understand what is the problem. I googled some things, but no one had the right answer. Someone said it was a startup with a defective software program, but I checked and I have the same 4 startup programs I've had there for a year. (DELL Wiireless WLAN Card, IDT PC Audio, Synaptics Pointing Device Driver and NVIDIA Compatible Windows 7 display driver) Everything is up-to-date and I already have Windows Update.

  * A video that I captured from my computer of this problem: http://www.YouTube.com/watch?v=GViQv-Xrm0U 

  (password stops around 0:42 and black appears at 0:52)

  Someone help? I'm paranoid that it might be a Spyware... ? None of my passwords and others are corrupted though, everything has been fine. I am making bluescreens (but not daily). I scanned with Malewarebytes and found nothing and I do that again right now. I also tried Registry Mechanic and Windows Security Essentials, but found nothing.

  I have no idea what Forum put it, this is my first time using this site...

  Model: DELL Studio XPS 1330

  Windows 7 Ultimate (64-bit)

  (I had this computer for about a year)

  The position of Bramble to drown in this issue How to start the program before windows logon user 7 Siena above [Archer] suggestion that you should study the entries in the services.

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• Vista will not solve, goes directly to the start of the repair/cannot fix the problem.

  It says wwindows faid load because the system registry file missisig or corrupted.lve tried everything, and he always comes back to the same tried message.even now the key f8 during the restart and no matter that l can't just back.can help you please and thankyou.also says status: 0xc000014c if this helps

  Hello
   
  1. don't you make changes before the show?
  2. who is the manufacturer of the system?
   
  We checked for error "status: 0xc000014c ' and the troubleshooting step for this problem is to perform the Startup Repair by using the Vista DVD. To do this, follow the steps mentioned below:
  1. Insert the installation disc into the CD/DVD ROM.
  2. restart your computer.
  3. If you are prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  4. choose your language settings, and then click Next.
  5. click on repair your computer.
  6. Select the operating system you want to repair, and then click Next.
  7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.
  8. once the Startup Repair tool is completed, remove the Vista DVD from the CD/DVD ROM and restart the computer as usual.
   
  For more information about the Startup Repair, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
   
  IMPORTANT: If the startup repair does not resolve the problem, you can choose "System Restore" Windows recovery environment and check the result.
   
  If you do not have the Vista DVD, and then contact the manufacturer of the system for more support options.
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• When I click on print, it does not print, it just opens the fax option.

  Greetings,

  I have a HP Officejet 6700 Premium all-in-one. Works of connection Wi - Fi and print test page works. I use Windows 7. When I'm in MS Word and click on 'print', I am re-directed to the fax properties. I don't want to send a fax, I just want to print.  Any help would be appreciated.

  Thank you

  I don't know anything using Win7, but under XP, when you click on 'Print' it evokes a printing box. Then, there is a drop-down list to specify the name of the printer, the option Fax being one of them. Make sure that HP Officejet 6700 is your default printer, and that his name appears in the selection of printers when you print in Word format. I hope this helps.

• Windows not genuine, neither Microsoft nor the store that I bought, I have some help

  Hello

  I have a hp desktop computer with Windows 7 pre-installed.

  He started to say by saying that Windows is not genuine. I spoke to Microsoft and they said my product key (which is not on a sticker, but I got the computer) is an OEM manufacturer that has been blocked, and I need speaked to where I bought the pc since. So I talked to the shop and they said that Microsoft can do anything because they possess the rights and ive basically been bouncing between since then. I don't know what to do, my computer has since refused to connect to the Internet, despite picking up signals and rattling Web sites, but when I try to use a browser says there is a problem with the DNS and the computer does not have an IP address? Any help would be greatly appreciated.

  I already told you that that key you extracted is a complete red herring.  It's meaningless.  It is not a product key that can be used for activation.  These utilities for key recovery should really explain their limits - they can get a product key that has been entered manually and which does not apply to Windows pre-installed & so.

  If there is no CoA sticker anywhere it has been removed.  Someone stole it to you.

  - - - - - - - - - - - - -

  A technical problem is causing your computer signal that it is not authentic to fix this technical problem should come first.  If you were able to solve the problem of internet connection and follow Gerry / suggestion of Christmas Paton on the Validation Code online cached then that would be your best solution.  Search this forum for the symptoms that prevents you to connect.  [If you think that something as simple as to reinstall the card driver LAN/WiFi could solve these problems]

  - - - - - - - - - - - - -

  Your only remaining option is to use restore factory has explained in the manual of the computer.  It doesn't have a product key to activate it, it activates.  This will overwrite all of your hard disk, so you'll need to backup all of your own files & Setup file downloaded on an external drive.  You will also find it useful to work your way around panel & each of your applications first to take notes the settings you have chosen in each of them - this can significantly reduce the resettlement effort.  You will also need to verify that you have a record of the product key for each of your applications to use during their relocation.  You will be horrified by how long it takes to get your computer to where it - while restoring factory takes less than an hour, working your way through reinstalling each application now and make all the settings to the top of the windows & each application can use up to several days.

  Once you're back up & running, start making regular system images.  They allow you to go back in time on your computer.  If I were in your current location, for example, I could "restore" a picture of a couple of weeks before this technical problem appeared and I would be back in half an hour.  If you don't have a single hard drive then you might consider "Division" he behave as two disks so that you can separate the OS & applications for your data - this will reduce the size of the system images and the time it takes to make them.

• Windows 7 is going to locked the screen 5 minutes unattended

  How can I stop this from happening?

  Right-click on the desktop and select personalize.

  Then at the bottom right, select the screen saver

  Change the wait time or delete the control, on RESUME, display logon screen.

• pop up window of google chrome - even with the movie

  Recently begun to pop - up coming as soon as I start to go to any web site.

  I don't know much on customize and control google chrome.

  Is there a reason for customization or control Google?

  I have no virus scanner in my laptop.

  Please comment.

  Hello

  Windows 8 was Windows Defender built into the system.

  http://www.Microsoft.com/security/PC-Security/Windows-Defender.aspx

  Press Windows + S flag to open the search bar

  Type MSCONFIG

  Press enter

  Click on the Startup tab

  Check secure boot

  Check the networking

  Click on apply, Ok

  Restart the computer

  You will enter the Mode safe mode with networking when the system load.

  Download the following tool and run a full scan to exclude the malware

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  When the scan is complete, return to MSCONFIG and uncheck safe startup.  Otherwise, you will continue to start in Mode safe mode with networking.  Click on apply, Ok > restart the computer

  Google Chrome > manage pop-ups

  https://support.Google.com/chrome/answer/95472?hl=en

• Windows 7 crashes when stopped at the last moment on the blue screen

  I know that the new card USB 3.0 installed is cursing the fault. I need USB 3.0 and it is the third card, I installed, but all with the same fault; When I closed windows 7, at the last moment, it hangs on the blue screen, some, but not all the time that this model of plate washing appears. Please can you help me? I have Windows, new driver search, but all drivers are OK. It seems to me like a time-out; as Windows has no time to finish closing. But I'm not experience enough if this is correct, and what to do if this is correct.

  Sorry, it is not the blue screen of death. It's normal when blue screen windows 7 is going down at the last moment it stops crash and sometimes she as well has this Board band appearance.

  When I remove the USB card, the computer works and closing down as usual. This is certainly the card USB curse the problem.

  Windows 7 accepts the driver USB works fine, no update available.

  Computer:

  Windows 7 Home Premium, 32-bit

  CPU: AMD Athlon (fm) 64 x 2 Dual Core Processor 3800 + 2000 MHz frequency

  Motherboard: ASUS A8N-E

  RAM: 4 GB

  WS

  You will probably need to communicate with the computer of the Mfr and the developer of the card USB 3.0 to see whether there is a newer (patch or beta) driver.

  Without a kind of diary, there is not a lot, we can help you.  The driver for USB 3.0 must be dated June 13, 2009 or newer.

  Alternatively, you can try to reinstall the USB driver in compatibility mode,

  If you want we can take a look at your Event Viewer logs

  Please provide us with your administrative Event Viewer logs by following these steps:

  Click on Start Menu
  Type eventvwr in the find programs and files (do not hit enter)
  Click with the right button on eventvwr.exe and click Run as administrator
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip to skydrive or a file sharing service file and link to it in your next post

• Re: Satellite A300-234 - product key does not work with another disk the

  Broke the new Satellite A300-234, flied Windows Vista. I did not the backup copy of the system. At the system from a disk of another laptop Toshiba A200-23d.

  The key away. What should do?

  Hello

  The point is that the product key from the underside of the laptop can t be used with another drive in Windows. It s just for the preinstalled OEM version and doesn t work with other versions.

  Normally you n t have to enter a product key if you are using the Toshiba recovery disc because it contains a picture of the factory settings and is different from a disc of Microsoft Vista.

  Anyway, as said Akuma you can order a new drive Toshiba Recovery directly.
  The another model of laptop recovery disk will not work because the hardware is different.

  Good bye