Updates user (their "mood" updates)

Similar Questions

• Many Add - ons unverified after FF43 update

  Many Add-ons appeared as not verified after FF43 update. I used them for a long time and they were perfectly fine with previous versions of FF. How can I continue to use? Even the dictionary with my local language and the DAP are unverified. How can I use external modules installed, rather than the site of Mozilla, like DAP add-on for example, that came with the installation of DAP again? Button of Pinterest coming Pinterest site also does not work.

  My suggestion is to add unverified option Add-ons for could be enabled too also manually by the user. With the adequate warning that this is recommended for users experienced.

  I don't mind provide your comments because it would probably unnecessary as "feedback". Just, let me remind that users - their number and their satisfaction - is it that help a browser to be at the top. When I switched from IE to FF, it was because FF satisfies me a lot more, and it has been and still is the best browser imho. But nothing is constant, even the love of fans hardliners like me, and who are one thing is constant could only make a mistake.

  PS. I suggested something, but not to appear that I run from the problem.

• Trying to capture what reports are running and what users

  Hi all
  
  A few months ago, we went to Discoverer 11 g. One of the patches that I expected was the update of the table of query statistics to see which reports are running and that was their execution.
  
  The problem is that most users run Discoverer more but they are not "free" closing more discoverer via file-> exit. They hit just ths 'X' to close the window. Oracle says that when users, their statistics are not written for query statistics tables. I find that the EUL workbooks that we installed are pretty useless because of this and really the only reason why I left the query statistics logging is enabled. I'm now seriously disable this because it is very inconsistent (cut out us statistics of query on a rolling table 180 days of history via the simultaneous program that removes the stats more than 180 days).
  
  I was wondering if anyone here has made any record of what files are managed through some triggers? I see there is a trigger EUL function that we have in place, called message save documents, recording the name of the workbook, sql, etc.. But it does not record the date on which it was run. Is that what someone has changed this trigger so that whenever a report is run, it saves the sql report, user and when there was ongoing at the table?
  
  "" I have a SR Oracle open, I asked this in two different ways, but they keep coming back to a canned response of "If the user does not do file-> exit, it will not save their session for the statistics of table... blah blah blah."
  
  I hope that I am sensible in what I ask.
  
  Thank you.
  
  Kind regards
  Jerry

  Hello

  I have never found the stats of discoverer to be very helpful for some of the reasons you gave.

  I see that a trigger EUL will do what you want that unfortunately there is no trigger to open document. In order to obtain information, you must rely on the user to save the workbook.

  An option that you can explore is to use a policy of (fine grain access) DBMS_FGA to audit certain discoverer query statements. For example, you can add a FGA strategy at the EUL5_DOCUMENTS table that selects records all on the table. This will show that users open the workbooks that you have in the EUL. Or you could add a policy to the tables/views used in the audit and discoverer workbooks then selects it with a condition of audit to audit only the discoverer sessions.

  How to do this depends on exactly what you want to audit.

  Rod West

• Words of past & favorite appeared to a new user who portable Mozilla on the same computer resinstalled (even after history, cookies etc. were deleted)

  Words of past & favorite appeared to a new user who portable Mozilla on the same computer resinstalled (even after history, cookies etc. were deleted)

  Firefox would use a profile previously used folder if this user would use the same Windows account.
  It is always better to give each user their own Windows user account and protect your own account with a password if you are concerned about privacy issues.

  You can use the Profile Manager to delete all the files and the profile folder.

  • http://KB.mozillazine.org/Profile_Manager
  • https://support.Mozilla.org/KB/managing+profiles

• Create a favorite list created by the user's storage

  I want to be able to have the user their own list of favortie creater, what my xml list is off. How can I have the waterfalls to create an XML storge it would go back to what tab or action is selected. Are there samples aroud.

  Hi quincar,

  You can check for the StarShipSettings sample application, available under https://github.com/blackberry/Cascades-Samples/tree/master/starshipsettings and perhaps, quotes application example might be useful also, available under ubder https://github.com/blackberry/Cascades-Samples/tree/master/quotes

  I hope this helps.

• only read access to the user

  Hi friends,

  I use the oracle 10.2.0.3 version.

  I have an asguser of the user who needs read access to the objects a bit. After I gave read access, he is able to access but must specify the schema_name.object_name. How can I make the user directly access the object without the schema name.

  Kind regards

  DBApps

  985871 wrote:

  Hi John,.

  The user will access them through an application. I don't think we can put a session level trigger.

  Kind regards

  DBApps

  Why not?  The trigger to run when a connection is established.  He does not know the application, and the application does not know about the trigger.

  As for your original question, the only alternative is a synonym.  When a given user is a reference to an object (like a table), oracle assumes that the object belongs to the user.  So, if the user wishes to make reference to an object that belongs to another user, their only choices are

  (1) to qualify the name of the object with the name of the owner

  (2) have a synonym that equates the name synonymous in the name of full object

  (3) change the session as John described.

  You asked about the creation of another user.  How do you think it would solve the problem?

  In the end, classic, manual, the most often used solution is a synonym.  I really don't understand why you seem to reject that.

• More then a user accessing virtual at the same time

  Hi all

  I have install Server2.0 for test and I must say that the web interface is a pretty cool idea. The main idea is to use the test environment 2.0 ina, which means that users will not be permanently connected to the virtual machine, but must be there they would go on some virtual OS that is not available in physical machines.

  The test I did was to install 2.0 in a DC 2003 server. Even if he told me that it wasn't good option to install on DC I went come just for test purposes. Everything works very well. I created a user and given the permitions restricted in order just to use the VM and not apply the changes to this.

  Then I added 2 virtual machines and I started one and start using it... Can I access the server 2.0 from somewhere else on the network and having the same user (or even with the diferent user) I started the machine VM for Sami. Now I have 2 users, access to the vmimage from different places and now the problem, is that both control the same vm in the same session... which means that I can't have 2 users working in the same image at the same time.

  On the gmx those who can't... I can access the vmconsole (even with the same user) and images (with the same user) access location diferent.

  Is it normal to work? Does perform a work around? Anyone with the same problem?

  Kind regards

  L

  Happy to help...

  Just give users their own virtual machines - you can grant permissions such that a user cannot access another user.

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• How to allow the user return to give lectures when they take a quiz?

  Hello world
  
  I'm new to Captivate and now I'm kinda in a dilemma. Thank you for your
  time to look at my post!
  
  I created a CBL in Captivate 3, the first 10 slides is a conference and he
  is followed by a quiz of 10 slides, defined as standard SCORM.
  
  I want that the learner must be able to refer to the Conference when they
  Take the quiz, I tried 2 approaches and they both
  issues in different ways.
  
  Approach 1: "allow moving backwards" and "infinite attempts. The
  problem with this approach is when the learner clicks on "review the.
  quiz"and when they click"back"on the first slide of questionnaire, all
  Quiz will start everywhere, the score is reset to zero.
  Because the quiz is seeing this as a new attempt and that the learner is
  permit to make "infinite attempts" such that it has been configured.
  
  Approach 2: "Allow moving backwards" and leave only "1 attempt.
  The problem with this approach is, when the learner is in the Middle
  Quiz and refers to the Conference, the quiz will be
  automatically shown as completed. And the learner will not get a
  chance to answer these questions unanswered.
  
  It seems that every time that I leave the learner refer to the Conference
  in the middle of a quiz, the quiz will be seen as completed. Who am
  I did wrong? Is there a better approach I can "allow backward
  movement' and always allow resumes user their quiz where they have left
  in the distance?
  
  Sorry for the long post, I was not able to express it in a more
  concisely.
  
  Any help is really appreciated!
  
  -David

  What you see is the behavior designed as in Captivate for the quiz.

  Each Captivate movie has a range of "quiz", which starts with the first measurable purpose and ends at the Quiz results slide.  If you enter the scope of quiz by starting a slide of questionnaire, then jump back away from quiz, to return to the basics, default behavior of Captivate is to freeze the quiz at this time here.  Then when Captivate refers to allow movement to the rear, it is talking only a move backward in the quiz.

  For example, if you get to question 1, but no answer and proceed to question 2 answer that we can go back to question 1, you will still be able to answer question 1.  The test will not be frozen.  However, if you had jumped to any slide before question 1, your quiz would have been frozen with everything that you mark had accumulated at this time here.

  There may be a workaround that you can use to get closer to what you want.  As any object that is classified as part of the quiz, you can add a button on one of the first slides that the user must click to move forward.  Set the properties of this button (or click on the box) to report a score for the quiz.  What makes a part of the scope of quiz.  Now, any content slides falling after this slide button are also within easy reach of quiz and return to them will not have the same effect of freezing the quiz.

  Please keep in mind another aspect of the quiz questions: If you answer a quiz question, and then move off the slide (forward or back) quiz question answer is frozen and cannot be modified unless resume you the Quiz or raise all of the module.

  Hope this helps to clear up how things work.

• How to set security for the user on the levels in the dimension?

  Hello. I'm considering implementing use right access to specific levels on the dimension of the branch.
  Assume that there are four companies at level 1 of the size of the branch. I want to restrict access only to users their own business.
  How it should be done in the sharing service? Thank you.

  Hello

  In this case, you can use the filters.

  Thank you
  Alain

• Problems with synchronization of Skype

  Hello

  I had a problem with Skype - all the messages that I sent to my group conversation did not go through. On this site, I have seen different fixes and tried. Unfortunately, none of them worked. One of them was by removing my %APPDATA%\microsoft\windows\sendto Skype folder, and so I did.

  It is important, because Skype has now no recent chat history. I find this curious, however, because both Skype on my Iphone and Skype Online recent conversations - including group chat, which, in both cases, work without problems.

  However, for some reason any Skype on my PC not will be not acquired data - I suppose that it supposed to download from a server? - and I can't check even if the focus group finally, works because it does not appear in my recent chat history or in my favorite contatns, in which I put it through Skype online.

  Except that most of my contacts on Skype PC lack their mood messages, which are present online Skype and Skype Mobile.

  Help, please

  Maybe it's a matter of time. The avatar must be updated when the user is displayed as being online on Skype.

• x 301 only connection to speed Wireless G (54 Mbps) Wireless-N network

  Need help to understand this.  Just got my new x 301 running Windows 7 Professional 64 bit - big machine.  So far only one problem - does not connect to the faster that 54 Mbit/s to my router (DLink DIR-655).  The wireless adapter on the PC is Intel(r) wifi link 5100 agn.

  I have 2 other computers that are connecting at speeds between 130 and 270Mbps according to their mood (or wireless card) wireless-N so I'm reasonably confident the router settings (for example, WPA2 encryption, mode dual n/g, channel width Auto 20/40) are usually very good.    Despite this - the x 301 is stuck at 54 Mbps.  When I look at the adapter for x 301 diagnostic output, he claims that my network access point is of "unknown type".  When I look on the router status page it says that PC is connected wireless G.  When I look at the dial-up connections it say that the network is a Wireless-N.  In all cases though 54 Mbps is reported as the connection speed.  I have tried everything I can think and seen in various one for (for example, mirror adapter settings claim work, download and update driver Intel, etc.) but may not make a difference.

  Any ideas about what I'm missing would be appreciated.

  Thank you.

  Thank you.  I had finally it works.  WMM router parameter was not active and changing who did it (no idea what it does well).  Who + play for a long time with different settings of the adapter and the router, I got a reasonably stable high speed connection.  Still not perfect as speed fluctuates more that should be, but reasonable performance.  Get this job shouldn't be that hard, but I guess it is.  If I had known before time to be an engineer to understand network that I would have stuck with a stable connection 54 Mbps and not worried about it.

  Agree with the notion that sometimes less is more - especially if a values personal time away from various configuration pages.  Opportunity for someone to create simple, 5th year level software that can take care of such things.

  All this aside - my new x 301 is by far the best computer I've had, so not all bad.

• Install the missing drivers after cleaning to Windows 7 from XP

  Hello. I have a custom computer I upgraded from xp to Windows 7 Home Premium. Everything worked perfectly before the upgrade. After the upgrade, my multimedia card, PCI, has stopped working and The Geek Squad, nor the built-in convenience store could find the drivers for it. It says "code OxC004C008 and 28 for the NTativrv01". then another message said: "PCI simple communications controller - no driver; then "Mlti-media conroller does not have a pilot.  appreciate any help I can get. Thank you

  1 a helpful to take before step same you've solved these problems is to create two alternative accounts protected by password Admin-level.

  • Accounts of users & their safety are taken much more seriously in Windows 7 so the tricks we learned under XP can not help us any more.
  • [No matter what account can suffer from corruption of the profiles user and if it's your main account and you have no spare Admin account to access the system, then you have a serious problem that we are not even allowed to advise you in this forum other than to suggest a complete reinstall of Windows 7].
  • If you have these two alternative accounts then, because they are rarely used, they are less likely to suffer from the corruption that is in use.
  • So even if you have problems in your account you can then log in as one of them and solve the problem.
  • You must write the passwords and ensure the safety of the sheet of paper.  You could do 'Password' reset disks instead, but they are not more effective than a piece of paper and they will also have to be stored somewhere in the place safe.

  2. did you run the Windows 7 compatibility checker before the upgrade?  You can start now and its results will always help you.  See Windows 7, 8.1, 10 compatibility tests for Windows XP, Vista - WiKi

  3 then see where to find the hardware drivers to treat your problems with your multimedia controller etc.

  4 once you get these things sorted, then you want to probably ensure that you get a Windows 10 forced update before you're ready - see disable Windows 10 improvement and ignore someone who starts to tell disable you updates specific Windows or turn off Windows update itself because it's all nonsense.

  5 like many of us when we arrived first of XP, you reach not used 'images of the system' which is worth doing as soon as you have a system worth preserving - so you probably want to turn it off until you have fixed your problem with drivers hardware.

  • You can make an image of the system in less than half an hour.
  • You can restore an image system in less than half an hour and thus replace problems based on software, including problems of drivers, who have appeared on your computer.
  • Search for create a system image using Windows to get an introduction to & use,
  • Then go into Control Panel, [view by - small icons, if necessary], Backup & Restore for the link on the left side to create a system image to run the utility.
  • Note that you should not make the system repair disc which will find references to your Windows 7 installation disc can do what a system repair disc can [etc.].
  • Target the most convenient & reliable to record images of system on is an external hard drive.  An image of the system does not have the external hard drive to any target, so it can also be used for other purposes such as the storage of your current file backups.
  • Rewritable DVD is not as reliable and you need several whenever you made a new image.
  • Utility of third to party system images can be better that the built-in Windows utility I use Acronis TI which has a very good reputation.  Macrium Reflect free edition also has a good reputation.  But you can start with the built-in utility, and then you worry about the alternatives later.

  All the best,

  Denis

• Can I still use Windows Anytime Upgrade to Windows 7?

  Hello!

  I have a question about Windows Anytime Upgrade on Windows 7.

  It always work? I have a key, so I need to buy it. I know that Microsoft has stopped selling the upgrade key.

  If I use my upgrade in Windows Anytime Upgrade key, will it really work? Or Microsoft does not allow upgrade users their edition of Windows 7 more?

  Thank you!

  Yes, you can use it, but it only works with updates in offline mode using an existing product key. See for instructions:

  http://www.notebooks.com/2009/10/26/Windows-7-anytime-upgrade-%E2%80%93-unlocking-more-benefits/

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Import/Export of types Administration

  Hello

  IHAVE created new logical types and some substitutions of types in "Tools |" Types of costs.

  These new types are used in my current design.

  I mentioned that the Administration Types are stored locally in the Data Modeler installation directory and logical types are referenced by the ID-s in the design.

  This means that if design is opened from another computer in which have different instalation of the Modeler, the new logic types defined will not present.

  Is it possible to transfer the information of types with design?

  Is it possible to export/import Types Administration information?

  Thanks in advance!

  Kind regards

  Dimitar Angelov

  Hi Dimitar,

  first of all, you should rethink whether you really need new types of logic. They are the abstraction layer that covers / isolate the kinds of native databases and some point of view, that they are meaningless to the touch - you can create domains if you want to express more semantic. The set of logical types to come with maker of data covers native types for all supported databases. It'll be easier for you (with future updates) just to rename the logical types if you n ' like how they are named.

  This is another point, if you play with native types defined by the user - their meaning is to add support for native types, that we do not support in the distribution of DM.

  Change the logical types will make your incompatible designs with other DM installation - you must still distribute the types.xml as well as the design itself. If you use SVN then this isn't a problem because you can put the directory "system data types" (preferences > data Modeller) to a SVN workflow with version directory and follow.

  and some substitutions of types

  That means in fact "type substitution?

  Philippe

• Should what next steps I take if the subscription was canceled despite valid payment information?

  Please, let me pay you, Adobe!

  I've updated my credit card over the phone with a representative of Adobe 5 days before my subscription of the CC was due and thought that this thing had finally been laid to rest! I was told to give him 24 hours to reflect the changes, but rather my CC membership has been cancelled by Adobe on the expiration date. I'm not sure of what has past.

  I think I spent about total 8 + hours trying to update my credit card information! I started the process weeks before that my subscription was set to expire as my previous card was also expiring. I came across errors on multiple machines, multiple browsers and saw this forum than many others had as well.

  Well, I was finally able to get a call from a representative of Adobe which was very useful and carefully unhooked my credit card details, even reading to me for verification. Then three days later... CC membership cancelled!

  Now, I should start a new subscription? Can I get my old subscription restored? I tried to honor my long commitment of the year at Adobe several times. Adobe, I would like to pay you - I have a valid card. I want to support my memory of end of contract. Please, please let me pay you, Adobe! I don't understand how you can create the best software in the world, but your customer service to make sure that people can actually pay and use it is so dismal.

  Please tell us what next steps I have to take. I'll try to reach someone via the cat again.

  Cannot afford to spend more time on this, but I have no choice. Thank you for any assistance you can give.

  Many people. It turns out that the best thing was for me to start a new subscription.

  I contacted a representative of useful Adobe via chat who told me that it was better to start a new subscription. I have to admit that I was overwhelmed by the amazing accessible software in CC but very disappointed (surprised) with the huge process of trying to update my payment information. I hope that Adobe will get this sorted out soon. Perform the payment of billing, digital companies online like Amazon and check out a breeze. Update your payment details should take about 30 seconds, not hours of skimming of the online forums, several cats with phone calls. For the majority of the CC users, their time is billable and expensive. We can afford to spend a day of work, sort of things like that.

  Adobe must match excellent customer service and ease of use with their exceptional software. It's logical. Hopefull they will get the kinks brought soon. It will be better for everyone involved.