Updates Windows KB953297 and KB95184 installation problems.

Similar Questions

• Format Windows 7 and the installation problem

  Hi, I have a problem of windows I'm getting conflicting solutions when I search forums. I have a Dell laptop that I bought in 2008, which came with Vista Home Premium 32 bit. Last year, I decided to buy a drive to upgrade to Windows 7 Home Premium 32 bit. Last days, I experienced a large amount of blue screens, closures, slow behavior and I finally decided to bite the bullet and reformat. My problem is I have more drive Vista OEM with me and what I read online the win 7 upgrade product key only works if I'm upgrading from a current version of Windows. Both products are authentic and I am willing to share this information to purchase with Microsoft. Is it possible to get a clean install of Win7 key in this case or any other alternative suggestions?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works.

  When I first installed the new 5.1 icloud, OUTLOOK 2016 worked well. Updated windows 10 and know icloud will not work. ICloud show that it works. Have reinstalled icloud a lot of time and know that the add-in does not show up in OUTLOOK.  Help

  I was pulling my hair re the incompatibility of iCloud and Outlook of Office 365 2016.  I finally got things to work on three of my computers - which are on the latest version of Windows 10.

  The steps that worked for me:

  (1) uninstall the plugin iCloud (what version you have); the uninstall may fail but if so don't worry as step 3 below overlays some iCloud plugin version you have installed

  (2) open the Control Panel, uninstall, change/repair Office 365; Select fast repair

  (3) reinstall iCloud plugin (version 5.1), then restart the system by following the instructions

  (4) after the reboot, plug in iCloud application Apple ID and password; Make sure that you enter your apple with the suffix icloud.com ID (e.g., [email protected])

  (5) check the iCloud options to your will (e.g., photo synch, synchronization of bookmarks, sync mail/calendar, etc.)

  (6) check apply it, leave the work plugin iCloud for a minute, when he finishes, check the closing

  (7) open Outlook 2016 and check your calendar or contacts or anything that you indicated in step 5, that you want to synchronize with iCloud.com

  I hope it works for you!

• With the MS updates and programs__ installation problems

  I seem to be difficulties with the installation of the updates and Microsoft software, and I don't know why. I bought Visio 2007 and when I downloaded and tried to install the product it failed due to an unknown error.

  In addition, I have for the updates fail when the installation is attempted. The installation of two upates are: the update of Silverlight KB982926 with error code 64 c and PowerPoint 2007 KB982158 update with 800766F error code. When I tried following the information in Help and support, the messages are: the network that this information is on can not be found(which is funny, because I'm not on a network), impossible to find the source and the unknown error. Are there any suggestions?

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It's updated operating system Vista, upgraded installation and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question of programs in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• all the updates Windows 7 available for installation, 0% download

  Windows 7 pro / 64-bit

  A few weeks ago, I received a notice stating that the updates are available and ready to download and install.
  I selected files and click OK. And left the room to go do something else, it usually takes an hour to download and install the files. I returned a few hours later and discovered "download 0% complete".  He has never taken this long.

  So I contacted MS support by telephone and gave them remote access to my pc.  They conducted tests of troubleshooting.  Conclusions of the trial revealed that some files have been resolved.  Before offline support, they passed a number of folder my way and disconnected.

  But I still have the same problem.  Updates are available and always see "download 0% complete".  I even let my pc for eight hours and still nothing.

  According to me, there was a lot to ask the same question. Many have responded with answers and all end up the same way.
  "There is no fix.

  I asked a question last week, if the updates can be downloaded manually.  One answer said to copy some files and share them on OneDrive.   OK, I opened an account on OneDrive and two shared files.  One being a copy of the information system and the other, a copy of the system events. And who shared with the question. Heard nothing.

  I inserted the same link below.

  Look at these files and tell me that you know how to solve my problems to download.

  Switch your windows update setting to never check the updates temporarily

  Restart the machine

  Then you download this from your download folder run from there.

  https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396

  Download the x 86 for 32-bit or x 64 for 64-bit

  Install it and restart when prompted too after he did a search of stand-alone for updates that should not

  take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check

  updates before running from the downloads folder.

  Once it installs and restarts

  You can reset your updates affecting everything you had before default =...

  Then check the updates manually.

  I think that the solution came from Softpedia and Joel_CS posted on this thread,

  http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml

  You must scroll down for Joel SC post threads, it is the last answer on this page,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-hangs/dbd539c3-bfc6-42DF-a6ff-0e55ef7938eb?page=6

• I can't install Windows XP and remove installs Windows 7

  I installed a Windows 7 upgrade version, but apparently I formatted the hd before installation. Now he says that my activation key is not valid. Tips from Microsoft to reinstall the previous version of Windows. But when I insert the CD of Win XP to start the configuration, the configuration of Windows XP option is red, so Windows 7 prevents somehow the XP installation program. There is no OS on the drive hard when I installed Win 7.

  Windows 7 system is 64-bit.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• 10 1511 Update WIndows - Dreamweaver and creative cloud launch

  Once the windows 10 1511 update the creative application of cloud, and the dreamweaver application no longer launch, the dreamweaver application will simply sit on a splash screen.  The CC app launcher/installer will not do anything, the exe appears in taskman but nothing never appears on the screen.  These are critical applications that claim to be compatible with win10.

  I want to nuke it from orbit and run the cleanup tool reinstall process: use of the Adobe Creative Cloud cleaning tool to solve installation problems

• After the last update Windows 10 - Z30 Satellite screen problem - has

  Hello

  After updating Windows 10 (threshold/1115) one of our Z30 - A sometimes wakes up after hibernation with the screen off. The only solution is to turn it off by holding the power and then turning it back on, button which is obviously annoying because open files may be lost or corrupted. The other Z30 - A that you don't show the behavior of sound.

  Someone at - it ideas? I would really appreciate the pointers.

  Thank you very much!

  Kind regards!

  Sounds like a driver problem.

  go to control panel and uninstall different drivers (sound, display, wireless, etc.), then let Windows update install the latest versions.

• Connection to printer Windows XP and Xerox 7132 problems

  I am running Windows XP, Windows Vista and Windows 7 on a network connected to a printer xerox 7132.  The XP machines will be able to send some documents before losing the connection.  I tried to remove and install but still the same problem each time.

  If anyone has had similar problems and know a fix?
  Hello by the way the Forum!

  Hello

  (1) did you nay recent Hardware / Software changes prior to this question?

  (2) you are able to print from other computers?

  (3) what is the exact error message while trying to print from XP computer?

  (4) how many computers are connected with the network?

  (5) the issue is with the printer or are you affected by network Windows XP problems?

  (6) did you check the printer connected locally to the computer?

  Check the city link FIXIT who may help you fixing the issue below.

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  You can also try to download the latest drivers and update the Firmware that can help you.

  Method 2: WorkCentre 7132 support & drivers

  http://www.support.Xerox.com/support/WorkCentre-7132/downloads/enus.html?OperatingSystem=WinXP&fileLanguage=en

  Hope this information helps.

• WRT 310N worm. 2. cannot update Windows Vista and Norton 360 since I installed this router

  Hello world

  As the topic title says, since the installation of the router WRT 310N worm. 2 on my laptop, Windows Vista, and Norton 360 can not be changed - I continue to receive operation failed errors whenever I try to download the latest version of the software updates or antivirus. Generated error doesn't also have a HelpFile associated with it.

  I went to the admin settings, but since I'm pretty new to routers and wireless technology in general, I'm a little busy with what we have to try so I thought I'd come here and ask the experts.

  Would be very happy for any help!

  Thank you very much
  John

  Thank you, great_white. I will try that first thing when I get home!

  I'll keep you and all readers display updated on what I find.

  Kind regards

  John

• With the help of QuickBooks 2011 and having installation problems.

  After working for 3 hours was advised to run sfc/scannow. Same message re:cbs.log-> corrupted files found but impossible to access and read the CBS.log newspaper

  Looks like your system is quite incoherent - and given the details to date...

  Backup your stuff (anything you want to keep/need to keep) and all have the installation media you'll need * loan * and restore to the factory settings.  Then update Windows Vista with the latest service pack.  Then update the drivers of the hardware device to the manufacturers of your hardware.  Then install your software.  Then all the other updates.

• Impossible to update Windows 8 and can not download from the Store

  Hello

  I have Dell Inspiron 14z with Windows 8.
  I can't update Windows. When I press on install updates, it starts, but there are always 0% and 0 kB.
  Download of the store has the same problem.
  Thank you very much for the help.

  Hello

  Please try the Troubleshooting Windows App tool for question related apps:
  http://www.kapilarya.com/download-Microsoft-accounts-Windows-apps-troubleshooters-to-fix-casual-issues-for-Windows-8
  And try to reset the Windows Update components for attachment of update of related issues:
  http://www.kapilarya.com/fix-error-80070570-Windows-Update-encountered-an-unknown-error-some-updates-were-not-installed
  Hope this helps, good luck :)

• Update Windows 10 and Acrobat 9 Pro

  I have recently upgraded to Windows 10 and my Acrobat 9 Pro and I now do not have access to the function of 'sign' to electronically sign documents. The conversion of the Word option (updated 10 also) doesn't seem to work properly.

  Any ideas?

  Hi rstrimel,

  
  

  Acrobat 9 Pro has not been tested on Windows 8 and you might face compatibility problems.

• Update Windows 10 and OEM Office Starter

  I couldn't find anything about it except for Windows Media Center, that no longer work and when I downloaded the app it says there is no problem with my computer, but for another laptop, when I contacted the manufacturer, they said that Office Starter 2010 would no longer work after upgrading from Windows 7 to Windows on a 64-bit 10 decided to keep Windows 7 only I have no desire to have to download the full version! I know there are freeware word processors and spreadsheets, but much like the Office Starter programs.

  My HP is a 32-bit and I have the same question. Let Office Starter 2010 after the upgrade? It came pre-installed HP.

  Thanks in advance

  Hello

  'Office Starter 2010' is a Microsoft product, I don't think that HP can control this. Microsoft has withdrawaled 'Office Starter 2010' of Windows 8 and I do not think that they would continue with Windows 10. Please check:

  http://www.ZDNet.com/article/Microsoft-begins-phasing-out-Starter-Edition-of-its-Office-suite/

  Kind regards.