updates Windows vista basic

Similar Questions

• Updates Windows Vista Basic - update did not finish install

  original title: updates Windows Vista Basic

  HI: I have Windows Vista Basic, Service Pack 2. Am trying to update, but Windows Update keeps running (for long hours now!) and do not close. Any Suggestions?

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message?

  It depends on the type of Internet connection and the speed you use. You can follow the methods below and see if it works very well.

  Method 1

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821

  Method 2

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and install the updates manually in a clean boot state, and see if it helps.

  Stage i

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: after a follow-up of troubleshooting Step 7: reset the computer to start as usual

  Stage ii

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Check whether the problem is resolved.

• Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  After my recent updates, Windows Vista Basic has stopped working on my laptop.

  Hey shousell

  stoppped working covers a lot

  If you can not start, follow these steps

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  or transfer your question in forum windows update link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• where can I download windows 7 premium or ultimate edition in order to update my windows vista basic

  I have the product key for my Windows Vista Basic Home Edition;  but I can not find windows 7 premium or ultimate edition to download and upgrade my windows vista computer.  I am looking in the Microsoft page and I can't find the Advisor to upgrade windos I have laready run. Now I need a direction to download windows 7 anyone can help me?

  Thanks in advance

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  Amazon.com: windows 7 oem

• I CAN'T ACCESS MY LAPTOP TOSHIBA (WINDOWS VISTA BASIC) BECAUSE OF MY PASSWORD BEING REJECTED BY WINDOWS

  I bought a Toshiba Satellite at Wal Mart in 2009 (3 years ago). I created a guest account and my personal account (host) to access. However, all the important stuff are in the user account from the host. My toshiba laptop running windows vista Basic. It has been 4 weeks as it kept rejecting my user password. Moreover, I do not CHANGE MY P.WORD OR MODIFY IT. I had virus problems and since then I can not access my laptop through my user account. It seems that I'm a homeowner, my key to the door can not open the door and am now sleeping outside. Help please

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Windows Vista Basic - display, icon & text animated look and does not fit screen

  original title: Windows Vista Basic

  After a recent update of my screen, icons, text and little else seems animated and does not have the screen on my laptop. Advice please? I tried to change my screen resolution, but it will only go all the way to the left or all the way to the right.

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• relocation of the agars recovery on computer laptop girls. Windows Vista Basic. Will not install correctly.

  Had to reinstall Windows Vista Basic on my laptop now girls probably 4 or 5 times over the past year.  A question is we get full and you get to a screen that says not to interrupt and cela will take a few minutes, which, on an attempt, I let it run all night and never went.  Finally, just let it load and put an end to the function and let him simply use the laptop.  Then after a few moments to use his laptop begins to freeze.  So, I have to go and try to reinstall its OS.

  If you restore so frequently, or at all, someone is something fundimentally incorrect and visit places / download infected files.

  Recover PC to factory specifications, winupdate turn off "recommended updates", but allow critical updates. Consult the manufacturer of your laptop and see if there are recommended updates shown there.

  Install a decent Anti Virus, MS Security Essentials is free. Do this before you install any programs or connect to the scocial network sites

• Messages to update Windows Vista 64-bit driver for Qosmio F30 Vista 32 bit

  Hello

  Today, I noticed that, update Windows Vista displays the bad update for one of the drivers of Qosmio F30.

  I have Windows Vista 32-bit, but Windows Update post a 64 bit version of the driver.

  See the screenshot [here: http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]

  Any idea?

  Hmm... it's strange?  :|

  The ACPI from Toshiba x 64 compatible driver certainly means a 64-bit version!

  I put t know why Vista driver update notification indicates a 64-bit to a 32 bit OS driver, but usually the 64-bit driver should not be compatible with the 32 bit OS.

  However, the deal seems clear don t install if the pilot is not designed for your operating system.

  Concerning
  …

• Cannot update Windows Vista kb971468 due to the error message 800B0100__

  Cannot update Windows Vista kb971468 due to the error 800b0100 of message

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
  http://support.Microsoft.com/kb/958045

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Unable to update Windows Vista, Error code: 800B 001, "Windows has encountered an unknown error.

  Its been a while now that I can't download and update my Windows Vista Home Premium(64-bit), every time I click on install updates, it starts to download the updates, and when its done and the error occurs, code error: 800 B 001, "Windows has encountered an unknown error" and when when I try again... Error code: 80240016, "Windows update currently installed other updates. Please try again later in a few minutes. »
  I downloaded the update Windows Vista SP2 site Web Microsofts (Yes, im still in SP1), thinking it could slove the question, I can not install, when I clicked to install it, it says: "the form specified for the subject is not one supported or known by the specified trust provider."

  My Vista is genuine and activated, came with my laptop HP HDX16 1050EE.
  This issue has been hard for awhile and its a little boring.
  Thanks in advance.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. (No, Symantec Support never say this.) See if the following solves your problems:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of the 2010 version of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  8 test cycle.

  NB: Your Norton application can disable Windows Defender by default.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista Basic

  Ideas:

  • HAVING programs that estan con problemas
  • Of error messages
  • Los recent changes made in su equipo
  • What is han intentado did el problema

  Means - This is a foro Público para no publicar nunca privada como el correo electronico o phone numbers information!

  Disculpen pero realize the previous pregunta antes, quiero saber Acuerdo al tratado del foro, los users than tenemos nuestro equipo comprado con el nuevo sistema operating system Windows Vista Basic al ser anulado por sistema Con cual operating system Microsoft answering evil will amendments?

  Hi Jarymon,

  Welcome to the Microsoft Answers Forum!

  Unfortunately, the Windows Vista community is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

  Kind regards

  Karena a: MICROSOFT SUPPORT

  ------------------------------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

   

• Error code 80070032 trying to update windows Vista

  Error code 80070032 trying to update windows Vista Hi I forgot I'm doing an update of windows & cant I disc clean up as well as other tasks that can do?
  can you help me please? Thank you please hurry my e-mail address below
  E-mail address is removed from the privacy *.

  ERROR_NOT_SUPPORTED 80070032
  Failed to create the directory or file

  Is this a sudden, new problem or a course?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Installation of Windows Vista Basic 32-bit

  Hello, I try to install windows vista basic 32 bit edition on an old laptop. He had originally windows vista basic 32-bit edition.

  I have the windows install key.

  The laptop's hard drive was fried and I do not make a backup of the operating system, also, he came with a "factory default disk" or the windows recovery disk.

  It came with a windows anytime upgrade disc ' ", he said can repair a current installation of windows, or install the operating system.

  Hard drive, I have currently in there has a version of vista business and the timer is exhausted, there also some conflicts pilot being that the hard drive has come to a laptop different and some aspects of drivers and other software refuse to be deleted.

  My question would be: can I install windows vista basic 32 bit with the disk at any time to upgrade, if yes how?

  Thank you

  I discovered that you can indeed install windows with the upgrade disk.

  My laptop is now in good working condition.

• Windows Vista Basic colors - no option to change the colors?

  If I open the appearance settings I have the option to select a color scheme, like that I use which is Windows Vista Basic color scheme. However there seems to be no way to change the colors of the regime. I want to change default bluish tints to something different. If I hit the Advanced button, it has a clunky menu to change the color of windows, fonts, and other. Unfortunately, it doesn't seem to work. I changed the colors, but they do not apply in all cases and I'm still stuck with the blue wire.

  What is going on? Is easier to change the colors of the window? It makes no sense to me.

  Thank you

  Tom

  Here is an article on how to change the color scheme in Vista: http://msdn.microsoft.com/en-us/library/aa394603(v=VS.85).aspx.  NOTE: There are some limitations for Vista Basic so pay attention to them and use the options that they need, and you should be able to do.

  If this does not work, market, the system cannot be activated for color schemes... Here is an article on how to enable this feature in all versions of Vista:http://www.vistax64.com/tutorials/182471-color-scheme-allow-prevent-change.html.

  Here is an article on how to change appearance advanced settings in Vista which can also help if the above is:http://www.vistax64.com/tutorials/78281-advanced-appearance.html.

  I hope that these articles can help you achieve your goals.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SE 8024008 error when you try to update Windows Vista 32 Service Pack 1 to Service Pack 2

  Hello

  This Dell Inspiron notebook running Windows Vista 32-bit Service Pack 1 and Windows Vista stopped editing about a year ago.  I just got the Service of update to start working again, a sort of...
  However, when I tried to update to Service Pack 2, it gave me error 80246008 and when I tried the link to fix, Services did not show the background BITS Intelligent Transfer Service () in respect of the services, so I followed the suggestions of Jose Antonio Ponton Posada CEO and tried the repair tool valid my Windows Vista 32 BIT and run the tool , but he said that repair BITS is not required on this computer.
  I checked the State of the Windows event log, and it was running.
  Please tell us how can I update Windows Vista Service Pack 1 running on this computer for the current Service Pack.
  Thank you
  Roxy111

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-vista-update-service-failure/b89bca27-9739-4bde-9f6c-a57ade14781d