updating of the database in a different version

Similar Questions

• User passwords do not work at the level of the application after updating of the database

  Hello

  Working on the updating of the database user passwords do not work for front end users but the same passwords work at the db level.

  We backup before refresh and restraint after the update, but if the user tries to connect to db, they receive the error invalid password/username.

  but passwords are working at the level of the DB if reset us the password then it works fine, but we cannot do this for all users of all time. can someone share the knowledge or solution for this problem.

  DB version: 11.2.0.3

  operating system: AIX

  Thank you

  892574 wrote:

  Yes, the process is correct.

  We are capture passwords user via display SYS. USER$

  I didn't see any errors in the logs I see only out put modified user.

  Thank you

  Do you mean that you update the column SPARE4 of $ USER (which is a table, not a view)? I don't think it will work, because the password is salted with a random string that will be different in the two databases. It might work if you return to the use of passwords for 10g, which are salty with the user name. See here, the 10 GB hash stored in the PASSWORD column is the same in the two databases, but the 11g in SPARE4 hash is different:

  orclz >

  orclz > conn sys/oracle@orclz as sysdba

  Connected.

  orclz > create user fred identified by Ginger;

  Created by the user.

  orclz > select password, spare4 of user$ where name = 'FRED ';

  PASSWORD

  ------------------------------------------------------------------------------------------------------

  SPARE4

  ------------------------------------------------------------------------------------------------------

  9C592D45D54D1FB2

  S:DF5BEC6914DFF48B39261EAA4DCF5746A309E50E791F6F90FBF2F33A8CD5; H:22E34131E43CC3DF07440A0DC2A45F22

  orclz > conn sys/oracle@orcla as sysdba

  Connected.

  orcla > create user fred identified by Ginger;

  Created by the user.

  orcla > select password, spare4 of user$ where name = 'FRED ';

  PASSWORD

  ------------------------------------------------------------------------------------------------------

  SPARE4

  ------------------------------------------------------------------------------------------------------

  9C592D45D54D1FB2

  S:4FE5925E671719B9CA5904C42AAD965753CAC4891C31F1BA9B9DA83D3255; H:22E34131E43CC3DF07440A0DC2A45F22

  orcla >

• At what stage of the treatment we use a rule to update to apply logic to the way the data are updated in the database?

  Hello

  At what stage of treatment do you use a rule to update to apply logic to the way the data are updated in the database?

  Rahul

  Hello Rahul,

  Update the existing record or a data object

  Thank you

  edynamic expert Eloqua

• Planning level 11.1.2.1 in 11.1.2.3.5 - updating of the database is not updated every custom on some Member attributes

  Us are currently working on improving our environment to 11.1.2.1 11.1.2.3.5, but have you encountered a problem with one of our applications, and only on one of the cubes in the application. When we perform a refresh of the planning database, it initially stripped of some members of the attributes, custom and is now refusing (Finally, not directly) to update on that specific cube. The other cubes in the same application, I can see the custom attributes, update correctly.

  The cube itself is not locked on the side of essbase, prevents the updates and the updating of the database of planning indicates he managed. I spent reviewing the essbase application log and planning0 journal, noting none of which seems to indicate a problem with the refresh or out of the ordinary.

  I am able to edit the cube directly via EAS and on the updating of the database, the changes are deleted (if I add an attribute) or the Member is restored (if I remove the Member), but still, no custom attributes.

  It is unfortunately the case at some 700 members of 5,000 members in one of our dimensions and only in a cube so that a single application, but we hit an obstacle for what might be the cause. What is happening in the our QA Dev environments, but I expect that since one is one migration on the other. Step moved to production yet because this (among a few other things) continues our implementation.

  If anyone can lend a thought on what could be the cause or the paths to understand where we can't look to fix this? I definitely appreciate all the help that can be done.

  Thank you

  Jonathan

  A solution to the problem, but not sure about the cause. By deletng the cube that has problems and performing a database update subsequently, we are now able to see the cube with the appropriate attributes. It would seem that we had problems with our cube Essbase itself rather than on the side of planning.

  My suspicion is that it might have been caused by our Essbase upgrade are out of sync from the upgrade of planning during the updating of the original database after the start of the process to upgrade (11.1.2.3.5 for planning vs 11.1.2.3 for Essbase). While I am not sure of the cause, I am sure the solution so feeling good go ahead now.

  John - I appreciate all the help and insight along the way, as it has helped us reach this point of the solution.

  Thank you

  Jonathan

• Urgent! How to open one of the last update of the project in an earlier version first?

  How to open one of the last update of the project in an earlier version first?

  
  

  I can't open a project that was saved in the latest version of first. My version is earlier than that of the project that have been saved

  Hello

  So far, backward compatibility is not available in Premiere Pro.

  Export your project as a FCPXML of the new version of first and try to import in the previous version.

  Kind regards

  Ilyes Singh

• What is the updating of the database?

  Hi all...

  Can someone tell me what exactly the average refresh databases in oracle?

  Thanks in advance...

  jgarry, you are quite right about that.

  An update of the database for a developer could mean just refresh the schema to use in the development database, but NOT patterns of the user.

  An update of the database to a tester could mean to update all application schemas, but certainly NOT the patterns of the user.

  An update of the database to a manager might mean updating the entire database of production, including patterns of the user.

  Most of the cases, an update of the database will probably only see the application schemas they use and not the user patterns.

  In these cases, the use of import and export is the most common method to make the update, although transportable tablespaces multiply for this purpose, but also of the flashback database for testing purposes (or even Real Application Testing - which uses flashbacks).

  In some cases, a test database will need to be completely refreshed with RMAN.

  I hope this helps.

• Cannot answer your request because the updating of the database

  I created a user in Services shared and then assigned to a group. After that, I went to the workspace in the ahead mode to manage security filters, the user does not appear and when I try to "create" an existing user, an error appears: could not complete your request because the updating of the database

  I do not turn any updating in the database and my EAS shows nothing. What could happen? It's Hyperion Planning 11.1.1.3

  Kind regards

  If an update of the planning is certainly not executed then maybe there is still a lock to indicate that an update is running, you can try to run the utility hspunlockapp - unlocking Applications

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Updating of the database

  Hi gurus,
  
  (1) when we say the updating of the database, we need to remove the database and clone again with the last backups rman.
  
  (2) whereas cloning not set us the id of database also. If we do not then set what happens. in fact, what is the importance of id database parameter.
  
  Please, help me to be clear in this.
  
  Thank you very much...

  (1) RMAN is physical backup. So delete the database that should be cloned and generate the backups

  (2) there are several ways to clone, if using DUAL control, you should not use DBID.

  We might think of the connection string:

  target: the new database which is getting cloned
  Catalog: catalog database--> that stores all backups of your company

  RMAN target / catalogue /@.

  RMAN > set dbid ---> to retrieve the details of data source catalog database backup. RMAN backups in catalog
  database are identified by the DBID

• How can I restore and recover the database to a different server using RMAN?

  Hello Friend:
  
  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.
  
  That's the two servers. different stored different on each server and a single link, a table library where backup set.
  
  I can only restore and recover the database of the Rman command. Could you give me a demo?
  
  Thank you

  How can I restore and recover the database to a different server using RMAN? I want to implement an enviroument which has a different enviroument and different directories.

  That's the two servers. different stored different on each server and a single link, a table library where backup set.

  I can only restore and recover the database of the Rman command. Could you give me a demo?

  Check this box
  * How to restore Rman backups on a different node when the Directory Structures are different [ID 419137.1] *.

• What is the exact difference between cloning the database and updating of the database?

  Hello
  
  Can someone like me precisely the difference between cloning the database and updating of the database?
  
  I have some conflicts in these topics.
  
  Thank you
  Rajesh

  Discounting is what he says, "Refresh". You have a main site which would always have the data inserted into it. There is another site that would stay somewhere else. This site needs to be updated with the main site. It must be the export of primary, push the site high school and done!

  HTH
  Aman...

• Updating of the database of db A db B and by changing the name from B to a.

  We have two databases A and B, both running on HP - UX environment on different servers. the two 10.2.0.1.0 version.
  
  Now, the A database's production with 75.5 GB of data. database B is just skeloton with any user of tablespaces.
  
  1. our requirement is to update / clone of database A to b. we are beautiful to recreate the database B as in the case of cloning. but we don't want to recreate the database B quite possible.
  2. after updating/clone, database B should be renamed_ to A database.
  
  All please can you the various methods available both by shutting down / without closing the database A and the approximate time needed on each case.

  A method is cloning the database.

  Shutdown method

  http://DB-Oracl.blogspot.com/2008/09/Superfast-cloning.html

  Using DBCA
  http://www.Oracle-base.com/articles/10G/ServerConfiguration10g.php#dbca_clone_database

  Clone of RMAN
  http://www.shutdownabort.com/QuickGuides/clone_rman.php

  HTH
  SS

• Necessary to define the database time zone differs from the OS

  We have a database of who currently resides in New York. Let's move to another server that resides in London. This is a problem, because each date which is currently in the time base is New York time, but after the move, all the new data that created time will always be time to London. We do not want users to have to remind any date preceding the date of move, will idle 5 hours if we would like to do is to have the database always on time in New York despite the BONE being London time. The server will be shared with other applications for the operating system time zone will have to remain with London time. The database will only have data for our application. So is there a setting of database that we can use to set the time zone database is different from the operating system time zone? The database is currently 10 GB but is promoted as part of the move to 11 g.

  What is the data type of the column? If the date or timestamp, then there is no time zone stored with the data. If timestamp with time zone, then the time zone of the data remains the same regardless of the time zone database and operating systems.

  SQL> select dbtimezone from dual;                    
  
  DBTIME
  ------
  -05:00                                               
  
  SQL> alter database set time_zone='EST';             
  
  Database altered.
  

• Updating of the database of Smartview?

  Is there a way to update the database of Smartview? If it is possible, I thought that it would be able to be done via a connection to planning.

  The answer is that it can be updated to the Ribbon Ad Hoc planning using the Extension of the Admin. It is a huge timesaver. John Goodwin has a pretty good glimpse of it on his blog.

  More of life than that...: planning 11.1.2.3 & #8211; Smart Display metadata management

• Updating of the database of planning

  We have a planning application that is used as follows: the contour is administered through planning, but everything else (like data entry, etc.) takes place using excel. We end up with a lot of fragmentation and I wanted to install a script for fragmenting the Pb from time to time. This is because it is an app planning will a MaxL script running on essbase ('alter database force restructuring") make the case or restructuring must be done with refresh via Planning-> manage-> refresh database databases?
  
  Thank you.

  If you want to defragment then Yes, you can run a maxl restructuring and she doesn't have to be an update of the planning.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• update of the database manager

  where can I find the database of updata on the Server Manager? How is it?

  How great the Update Manager download drive must be at least?

  Thank you

  I don't think you can see it with customer vsohere - you will need to have access to her wean vcenter and watch the system DSN configured in the ODBC client on this machine - I hope that best practices were followed and the DSN is appointed by the store what data they point to -

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful