Updating processor for DELL Desktop 2400...
I get fed up with my pc going slowly and was studying the processor upgrade. I'm totally confused as to what will be or will not work with my pc. Can anyone help to recommend all those decent for a DELL Desktop 2400? I wonder about the Intel 2 Duo and Quad. I need to add/change another thing when I update? Thank you in advance.
Intel Pentium 4 2.8 GHz
Don't know if you need any other info...
Tags: Dell Products
Similar Questions
-
New processors for Dell Optiplex 745?
Hi, I have a mini Dell Optiplex 745 desktop computer and was looking to upgrade my processor.
What options are there for me? I was hoping to upgrade to an Intel Core i5 processor.
The motherboard is as follows:
Board: Dell Inc. 0GX297
Serial number: CN6986174I20AF.
The bus clock: 800 MHz
BIOS: Dell Inc. 2.2.0 03/29/2007Yes, you can use Core 2 Quad Q6600 or Q6700. You cannot use Q8xxx/Q9xxx.
Also, the faster supported non-Extreme dual core is Core 2 Duo E6700.
-
How to: get the new recovery disc for dell desktop 3000
Original title: anyone know how/where can I find dell 3000 desktop windows xp recovery disk?
The N eed dell recovery disk 3000 systems. Currently operating windows xp home edition.
Thank you
Yes,
You must call the Dell Support (1 800 822 3769) and for him.
-
best upgrade processor for Dell Optiplex GX620
Hello
What is the fastest processor intel core 2, I can buy for my dell optiplex gx620?
It has a pentium 4 2.8 ghz LGA775 socketI've heard of bieng capped at 800 mhz fsb and I was also wondering if I could buy a dell optiplex Board that supports intel core 2 processor or if there is a way to Flash the BIOS for this
concerning
Ash
The GX620 does not support processors. The chipset could theoretically make some of the low end, but the bios should recognize the processor and then more or less allows dajuster the voltage supplied to the CPU motherboard.
The best you can get is a Pentium D I think. The first Optiplex with main support was the 745 if my memory serves.
-
Update map for Pavilion Desktop HPE his 1260t h8
I want to buy a new sound card to upgrade my audio quality. Can someone tell me what size of slot / and or should I be looking for the type of card? Any info would be greatly appreciated!
Hello:
Here is a picture of the motherboard used in your PC.
It has 3 PCIe slots x 1, the one free, which you can install a sound card.
These are the 3 small black parallel slits at the bottom of the image.
So, you should use a PCIe x 1 (PCI Express x 1) audio card.
-
Repairs for Dell DImension 2400 series c Office
Please note that I replaced the CD Rom drive supplied with the computer with a DVD ROM drive
Also, when starting the computer takes longer than usually done.
You are welcome.
-
I would like to know what processor for Dell Dimension 2400 can use as many of the ram size and what is the size of the compatible ram. From now on, my Dell Dimension 2400 has the Intel Pentium 4 and I want to make my computer faster.
JohnLabibI would like to know what processor for Dell Dimension 2400 can use as many of the ram size and what is the size of the compatible ram. From now on, my Dell Dimension 2400 has the Intel Pentium 4 and I want to make my computer faster.
JohnLabib
The Dimension 2400 supports a maximum of 2 GB (2 x 1 GB modules) RAM DDR.
The Dimension 2400 can use 400 MHz or 533 MHz, Socket 478, P - 4 Northwood or Celeron processor with a 512 k or more small cache.
The maximum size of the processor is a Socket 478 Northwood P4 3.06 GHz, 533 MHz FSB processor.
The 2400 will not take Prescott processors [1 MB cache].
Before upgrading the processor, verify that the latest BIOS is installed, with BIOS version A03 CPU microcode update has been added in support of the latest processors.
Bev.
-
Memory for the dimension 2400 choice problem
I am looking to order more memory. A concert stick would be nice.
My problem is the manual system provided with the Dimension 2400 says this:
DDR SDRAM memory architecture
Two memory connectors
Capacity of memory 128-,-256, or 512 MBMaximum memory 1 GB
Memory type PC2100 (266 MHz) and PC2700 (333 MHz) DDR
SDRAM (non - ECC)To purchase memory from Dell Web site says this:
Maximum memory: 2048Number of slots: 2512 MB memory Module for Dell Dimension 2400 / 2400C / 4600 Desktops $ 33,14
1 GB Memory Module for Dell Dimension 2400 / 2400C / 4600 desktop $ 55,14
If the Dell system manual is not saying 512 k by maximum stick and the Dell store saying 1 GB max stick?
I would like to get a 1 GB stick. What should I do?
Hmm... I just read on user 1 GB stick magazines that many are running in their Dimension 2400.
Message edited by Newbee video on 14/08/2008 16:59
-
Update Firmware in Dell Equal Logic PS4100E
Hello! I have a Bay Dell equal logic PS 4100E. I need to update its firmware. Currently Im running Firmware V5.1.1. I read this: "Update Firmware for Dell EqualLogic PS Series arrays and FS Series storage facilities" but I need confirmation before doing the actual upgrade.
Since Im running V5.1.1 now, I need to:
(1) download and install the firmware V5.2.11
(2) download and install the firmware V6.0.8
(3) download and install the firmware V7.0.2
Am I wrong? Could someone confirm that its okay? Soon ;)
To get to v7.x v5.1.1 you only need to do two updates, first upgrade to 6.0.x (the most recent, 6.0.8). The document upgrade firmware for v6.0.8 clearly shows that you can go to 6.0.x 5.1.x and no need to do the 5.2.11 upgrade).
Once on the last version 6.0.8 (and the table has been restarted - very important to do this step!), you can go to the latest version of 7.x.
(Note that the release notes for 7.x is a bit of confusion on this and need to be revised to show the path of 5.1 to 7 a little better)
-joe
-
Dell dimension 2400 desktop computer was plugged into the wireless router we have. We got a new computer and moved the old desktop (Dell 2400) in another room. It is not picking up, or even searching for a wireless signal. She still has this ability? How can we it give this ability?
The Dimension 2400 is not normally a built-in wireless networking capability. To view, go to the Control Panel > Classic view > System > hardware > Device Manager and double-click network adapters .
If that doesn't show wireless network card, you can add it by buying a USB wireless network adapter or a Wireless PCI adapter card .
-
Dell Dimension 2400 desktop w/XP Home Edition: video card Question
Hello people... last week, I got a desktop pc from a friend who walked away, Dimension 2400 desktop with Windows XP Home Edition. I plan on upgrading it and either sell it or it give. Last night, I ordered a titled graphics card "ATI Radeon 9250 card 256 MB DDR PCI"... which, after purchasing, I discovered via google and other search engines it takes to 220W - 250W power... the power supply installed is 200W... fundamental question is: should I upgrade the PSU? ". Or 200 will do well. Thank you!!!
Jimmy
Dell Dimension 2400 desktop SPECS: Intel Celeron 2.40 GHz PCU; Hard drive 40 GB IDE WDC Caviar WD400BB-75JHC0; Optical drive DVD-ROM IDE; Installed Maxxed-Out @ 2Gb (2x1Gb) DDR1 memory; Windows XP 32-bit Home Edition with COA & Code product key sticker
Hello
Welcome to the community
Have you tested the video card? The computer works fine with the new card? In this configuration, I suggest to upgrade the power supply. You can get 250W or higher power. If the computer is on, you can wait for that stop at random. Let me know if you still need assistance.
Kind regards
-
Need help to reinstall Windows XP on a Dell Dimension 2400 desktop
I bought this desktop computer Dell Dimension 2400 in 2003 as a wedding gift for my daughter and son-in-law. They are busy and it was not much used, but it just got to the point where he needed the reinstalled op. I've done it before on my computer so I suggest you to do it for them. When my daughter went to recover the disks supplied with the PC there is no House of windows xp included reinstall op edition drive and I don't think I ever had one with the PC. Other CDs were there. I decided to try to use reinstall windows xp edition drive family of my Dell Dimension 2200 op. I was told that it was OK to do this when I spoke with a Dell technician. When it finished formatting and installation of the op I found that I did not set up an internet connection. In Device Manager, the Ethernet hardware has question marks by them and are highlighted in yellow, even though I had put in the resource CD and downloaded that and everything on all the other drives right after the installation. If I could get on the internet I could download the drivers and other necessary things for other minor problems, I'm having too large icons, etc. The only difference between the Dell Dimension 2400 and my Dell D 2200 is the 2400 internet ready came from the factory, and I added the ethernet card in my Dell Dimension 2200, Linksys. Otherwise, they both use the same broadband, Roadrunner, which is always on cable modems. What can I do now?
The product key is the 25-character code on the sticker on the computer case. Keys for the home edition are not compatible with other editions (Pro, Media Center, etc.).
-
New HP 2011 x 20 '' LED monitor for old Dell Dimension 2400. necessary graphics card?
My in-laws have an old Dell Dimension 2400 and the monitor exploded. I bought a new HP 2011 x 20 '' LED monitor. My WIRE went to set up, and he tells her that a HMDI graphics card is required.
This is a pretty old computer. I think he might have as... 512 MB of RAM. Is there an inexpensive graphics card that will meet their needs?
And besides, when they buy the graphics card, are there all the cables that they must reach a new monitor to an old computer?
Thank you very much!
Nice description of Dell:
Video connector to 15 holes :-)
Seems to be a VGA connector.
From the description of the monitor:
http://support.HP.com/us-en/document/c02643130
There is an also vga connector, so you will have no problem to connect the two.
No additional card is necessary, no other cable - just use the old vga cable.
Your only problem might be the resolution:
resolution 1600 x 900 set at the factory for the monitor.
I don't know if you can set the resolution to Dell, you should test.
Otherwise a 4:3 normal/old monitor would be better than this 'big screen' new.
HTH
C.
P.S. the Dell printer documentation:
http://support.Dell.com/support/eDOCS/systems/dim2400/ -
Update Windows 7, custom settings for windows desktop
Just got new pc Saturday, updates today, now pc hangs after connecting with a window that says "Implementation of the custom settings for windows desktop update" cannot do anything else but reboot and get the same results.
Hi volnavy,
You can try a restore system from safe mode and check if your system works very well.
Step 1:
You can try to start in safe mode.
Check out the link for more information on starting your computer in SafeMode below:
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2:
You can try the system restore safe mode shape.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
You can consult the links for:
System restore
http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
At the start, receiving the message "Primary Drive 1" not found on Dell Dimension 2400 desktop
Original title: primary drive 1 not found
I'm helping a senior Windows user with a problem on his desktop Dell Dimension 2400. At the start, he gets the message "Primary Drive 1" not found. Can someone point me in the right direction as to what measures to take next?
THX,
Mike T goes.
Hi Mike t. in Virginia
You can check out the following link and try the steps suggested by Samhrutha G, Support Engineer, December 3, 2010 and check if this may help:
Hope this information helps.
Maybe you are looking for
-
Sent messages appear twice in the "Sent" folder
Whenever I'm using Thunderbird 38.1 on Windows 10 to send a message, the message is saved twice in the "Sent" folder I don't have an account with Thunderbird. If I delete this message, the single message sent is displayed twice in the folder "deleted
-
CTRL + click / SHIFT + click does not not on the specific Web site
I'm an admin for this blog site: http://undividedblog.org.uk/ If you use Firefox, I discovered that, for almost all of the links on the site above, perform a CTRL + click or a SHIFT + click the link does not open the link in a new tab or window, but
-
Y at - it an app that can access the Appleworks files?
I have a lot of old Appleworks files that I can be more open because they are not supported. I had to keep an old iMac that is still just able to endure the old Appleworks both latest software, but it is causing more and more problems to each new up
-
Hello my MBP has been unexpectedly quit on the night these days. Not always at the same time and while in sleep mode or certain activities of the NAP. How to find what's the problem? Thank you Stefano
-
with WUSB600N wireless connection management
I just installed a (renovated) WUSB600n on my netbook. The to-do bar displays 3 wireless connections, one is managed by the Wireless Linksys network monitor, and the other 2 are managed by Windows XP, each of these 2 shows a connection to a wireless