Updating rules - values inclusive or exclusive?

Similar Questions

• When will update rules for lead Source - Original trigger?

  I'm just some work to fine tune our SFDC integration settings.

  We have a rule Eloqua that is updated the 'Source of lead - field Original"with the value of"License Source - Most Recent"where the original field is null.  Now I know this rule fires when data are posted from a form, but I don't know what would happen if the latest data came from SFDC.

  For example, one of our sales team creates a new track and enter a value in the Source of lead - most recent field.  Eloqua will create the contact and find out the newest field in the source, but my question is the rule triggers the update the original field?

  Thanks in advance to anyone who can answer this!

  Alan

  It does not trigger as it would on a form, but you can build a program to find the newly created contacts who have an empty field "lead Source - Original" and run an update rule to fill.

• Help! Try to update the values of Member - but does not (completely).

  We are trying to resolve a calculation in the middle of the update of business cycle. There is a push to update existing values for an account specific forecast time scenario.

  Essentially, we want to update the value of forecast current account 56400 to 0.33 * ("56100" + "56110" + "56300" + "56310" + "56320").

  The solution is to make sure only rest of the current year, Apr - Dec, updated forecasts to date.

  Currently the rule runs, but handful of values is never get updates - I'm not doing correctly?

  relatively small cube BSO, Account (dense).

  Here is the rule of this task running

  SET CACHE HIGH;

  FIX (& those 'Forecasts', 'the current iteration","F_00000");

  "56400")

  IF (@ISMBR (& NextMonth: "Dec"));

  0.33 * ("56100" + "56110" + "56300" + "56310" + "56320");

  ENDIF ;)

  ENDFIX;

  -followed by a calc all

  I expect to update all occurrences 56400 in the fix above...

  Thanks in advance!

  Himanshu-

  You probably need...

  UPDATECALC OFF SET;

  .. Smart calc or .in there will prevent 'own' blocks to be recalculated.

• update the value of the column to the next value

  Hi all

  create table xxc_test (date of from_date, to_date date, amount, number incr_amount);

  Select 2014, 2015, 3000, the double null

  If suppose if input data in the incr_amount then let say 1000 I want to update the value with incr_amount column amount

  Select 2014, 2015, 4,000 of the double

  If not even though it is as

  Select 2014, 2015, 3000, the double null

  and must be updated to the year

  Note: I spend the year, amount,incr_amount manually (run-time)

  Post edited by: Rajesh123 Note added in the subect

  Hello

  : new.incr_amount: = 0; also use it in code.

  The condition " If : new.incr_amoun is > 0" then (sure fire or change the value only if the increment is positive. ).

  ,....

  ..
  

  end if;

  
  

  -Thank you

  Pavan Kumar N

• Oracle apex 5.0: not update the values in the Collection.

  Hello again,

  I have a problem in IR where content comes from the collection query.

  Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com

  testdump/developer/Office

  All of the Suggestions!

  Thank you

  Pranav.

  Pranav.Shah wrote:

  I have a problem in IR where content comes from the collection query.

  Now the question is when I update the value of the column in the report and click on the custom button, that it will update the value of collection and insert the updated values of the collection member in another table that works well according to my condition, but when I will apply to any word in the search bar (say books in order not to update the values of books) and tries to update the value as a result of research above requirement does not work I mean the collection is not updated. Apex. Oracle.com

  testdump/developer/Office

  The "coll update" process fails with a ORA-01403: no data found error. This happens in line 11 because of the access attempt to the wwv_flow.g_f01 using the variable array subscript c who has been incremented beyond the size of the table, which is now smaller because of the IR filter applied.

  begin declare
    c pls_integer := 0;
  begin
  for c1 in (
    select seq_id,c001 from apex_collections
    where collection_name = 'MATRIX2'
    ) loop
  c:=c+1;
  apex_debug.message(c);
    apex_collection.update_member_attribute (p_collection_name=> 'MATRIX2',
    p_seq=> c1.seq_id,p_attr_number =>'2',p_attr_value=>wwv_flow.g_f01(c));
  
  end loop;
  end;
  end;
  

  I agree with fondant tabular forms on interactive reports, but you can meet your requirement as follows. In your application, see page 2.

  1 Add a column of form element hidden IR containing the sequence number of collection:

  select
      c001 col1
    , apex_item.text(2, c002) col2
    , apex_item.hidden(1, seq_id) seq
  from
      apex_collections
  where
      collection_name = 'MATRIX2'
  

  2 place the question of the hidden form in the report using the COL1 Expression HTML attribute:

  #COL1##SEQ#
  

  3. change submit to the process if it is driven by the subject table, not the existing collection:

  begin
  
    for i in 1..apex_application.g_f01.count
    loop
      apex_collection.update_member_attribute(
          p_collection_name=> 'MATRIX2'
        , p_seq=> apex_application.g_f01(i)
        , p_attr_number => '2'
        , p_attr_value=> apex_application.g_f02(i));
    end loop;
  
  end;
  

• How update the values in ValueChangeEvent...

  Hello world

  I use Jdeveloper 11.1.2.0.0.

  I have a scenario as follows. I have 2 fields like password and Confirmpassword.

  I wrote a ValueChangeListener for the password field to make some validations and I wrote an other ValueChangeListener for the field Confirmpassword inorder to compare values entered in the two fields.

  But here..., event in ValueChangeListener field Confirmpassword, iam cannot retrieve the password field value to compare.

  
  

  The reason is... ValueChangeListener is located in ApplyRequestPhase/ProcessValidationsPhase and updated the values in UpdateModelPhase values are so not updated and impossible to get in the ValueChangeListener event.

  
  

  In order to update the values of the tree of components in case of ValueChangeListener, I tried to use code below

  valueChangeEvent.getComponent () .processUpdates (FacesContext.getCurrentInstance ());

  
  

  But the values are not updated... Please suggest me to complete my scenario. Do what is necessary. Thanks in advance.

  
  

  Concerning

  Leprince
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Hello

  Change the scope of the bean to viewScope.

  Kind regards

• Run the function after the update of values

  I am writing a pretty basic plugin where I need to have a function to run after a point values have been updated.

  I do this to change the point values:

  params [POINT]-> u.td.x_value = FLOAT2FIX (pointX);

  params [POINT]-> u.td.y_value = FLOAT2FIX (pointY);

  params [POINT]-> uu.change_flags = PF_ChangeFlag_CHANGED_VALUE;

  This works very well for updating the values, but the code that goes after this block is executed until the values change really. Is there a way to force change to happen once I set new values or is there another place I can put the function so that it is executed after the values are actually changed?

  Hi Jesse Toula. Welcome to the forum!

  If you want to change is instantaneous, you can use AEGP_SetStreamValue() instead of the method that you use.

  There is no function that is guaranteed to be called when you change the values.

  UPDATE_PARAMS_UI could be called, and also a call of minutes is likely.

  You can set a flag in the sequence data to inform yourself of the pos - t change operations that must take place in such cases.

  personally, I'd go with the AEGP_SetStreamValue() solution.

• How to update the value of a value in a table

  APEX - 4.1.0.00.32
  Version of DB - 10 g
  Web - OHS server architecture
  Browser - IE8
  Theme - 9
  
  Hello
  
  I have a tabular form and I want to update the value of a field using a process based on an add-on.
  
  the name of the column in the form of tables is (name of column P22_PROJECT_ID)
  
  The error I get is
  
  ERR-1002 unable to find point item ID 'P22_PROJECT_ID' in the application "103".
  
  Error unexpected, unable to find the name of the option at the page or application level.
  
  The field is questioned as
  
  Select pt.project_id P22_PROJECT_ID
  
  The code I'm trying to use in the process is
  
  : P22_PROJECT_ID: =: P10_PROJECT_ID;
  
  I also tried without the colon (P22_PROJECT_ID), but the application does not recognize.
  
  Any help would be appreciated.
  
  Thank you

  the tables for is on page 22?
  the project in page 10

  I think you go to page 22 page 10
  Create a new item in page 22 as p22_project_id
  Since 10 passes as a parameter the page p1o_project_id and set p22_project_id

  by default as p22_project_id

• Update the value Table B if table A the value of different

  Hi all
  I'm using Toad for Oracle and need assistance with a trigger. I have two tables tables A and B Table with some of the same fields. I want to only update the values in the array B, if the values in table A are not equal values in table B table A update. Don't update the record where the primary key of the Table equal to the foreign key in the Table B. I have a sample script below, I hope someone can give me an example, I can develop and test. Thanks for reading also.

  CREATE OR REPLACE TRIGGER AU_Table_A
  AFTER UPDATE ON Table_A
  FOR EACH ROW
  BEGIN
  If Table A :old.value != Table A :new.value
     then 
     update 
  --Update Table B value with Table A updated value
     Table B :old.value = Table A :new.value 
  where Table A primary key = Table B foreign key
  ............
  END IF;
  END;

  Published by: Nikki on December 6, 2011 07:50

  Hi Nikki,

  If I understand correctly, then maybe

  create or replace trigger au_table_a
    after update
    on table_a
    for each row
    when (old.value != new.value)
  begin
    update table_b
    set    table_b.value = :new.value
    where  table_b.foreign_key = :new.primary_key
        and table_b.value != :new.value;
  end au_table_a;
  /
  

  Note that the solution is not trying to handle NULL values. If you have NULL in to either A or B, we have to manage those specifically

  Concerning
  Peter

• Update the value of DataGrid

  I have a request - it can be found at http://reactorsoft.ath.CX/projects/Cygnus_v1/Cygnus_v1.html If a reference is required.

  In this application, I have a DataGrid. What I want to do update the rightmost 3 columns based on the data entered in the Act. Column of gains. Ideally, this will be row-by-row.

  The problem I encounter is that the value in the DataGrid control is not updated quickly enough when the itemEditEnd event is raised. If I return to this line and update the value is entered, the old value will be recovered. How can I work around this problem?

  In addition, another problem I encounter is that the triggerEvent itemEndEdit event value is not give me a value. This is supposed to tell me if the installation has ended due to a mouse event or keyboard. It is also essential to what I'm trying to accomplish.

  Can anyone provide me with an isight in this? It will be very much appreciated.

  A tip: use the method callLater to ensure that the dataProvider has been updated:

  
  http://www.Adobe.com/2006/mxml"layout ="absolute"creationComplete =" init () ">"
     
          Import mx.events.DataGridEvent;
  Import mx.collections.ArrayCollection;
             
  [Bindable]
  private var dp:ArrayCollection;
             
  private function init (): void
  {
  var da: Array = [{id: 1, amt: 0, c1:0, c2:0}, {id: amt 2: 0, c1:0, c2:0}];
  DP = new ArrayCollection (da);
  }
             
  private void calc(evt:DataGridEvent):void
  {
  var currObject:Object = [evt.rowIndex] dp;
  currObject.c1 = currObject.amt * 2;
  currObject.c2 = currObject.amt * 1.5;
  }
  ]]>
     
     
         
             
             
             
             
         
     
     
  

  Hope this helps,

  Dany

• Question about the update of value added for the Satellite P100-160 package

  Hello

  I got an email off the coast of Toshiba today telling me there is a value added package update available (PVAT (v1.0.25).
  I downloaded and unpacked. It contains three options:
  2 don't buttons, button 6, no button but there is no readme etc to tell me which version is my P100-160.

  I have added, trying to install one of them gives me an error that it has already installed older versions that should be deleted everything first.

  Can someone advise please that I should use?
  Thank you!

  Hi guys

  Value added package contains many different Toshiba and utility tools!
  Satellite P100-160 belongs to the PSPAA series! So, you should always choose this series if you want to download the drivers from the Toshiba page!
  This number can be checked on the bottom of the unit.

  I visited the page of the Toshiba driver and checked the details.
  You will find an info that this package installs a range of important public services.
  -TOSHIBA components common Driver: this module is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  -TOSHIBA Power Saver: The energy saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
  -TOSHIBA utility: this program allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
  -TOSHIBA password utility: this utility allows you to set a password that restricts access to the computer.
  -TOSHIBA Flash Cards: This utility provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
  -TOSHIBA PC Di

  In my opinion, if you want to update the package of value added, you must remove all the tools of this and after new reboot you must install it again

• Update the values in the loop after pressing OK without a control

  Hello

  in a loop, a chain of control can be changed until the user clicks the ok button. This method works.

  But the button is also assigned to toggle with the return key.

  But now, the output is not updated any more.

  Is there a solution?

  THX

  

  Iliale wrote:

  Attached my VI that doesn't work here.

  If I stop the loop with key then return the s text not written

  Set the control to the value of update while typing.

• cluster management: selective update of values

  Hi all

  I have a VI work, but I'm convinced it's not exactly good code. However I don't know how to do better.

  the task is to replace some values in a group of old data with new data, according to a user in the form of Boolean values for each value input.

  do not hurt me to encode this

  

  the bottom is: these are the correction values for a continuous flow of data, in oder to correct dynamic offset gauges. This VI belongs to a higher level while loop.

  Thank you for your ideas!

  In situations like this, oftne I like to use a loop FOR.  AutoIndex on a string array and using a structure dealing with wired Terminal selection to the chain.  Now you can ungroup one thing at a time, if you decide to update, and only update it if necessary.  I find it easier to understand and it takes much less space.

  

  Note: In the case of FALSE, I'm just the 'current' gauging straight wiring.  If the shift register is always the last cluster and we update only if necessary.

• Help update the values to modify files on Excel sheet

  I have an excel sheet containing a list of values that need to be updated daily. Cells that have values are related to certain cells in a separate file. The problem is that the file that gets my excel sheet is constantly updated values of as well as the file name. I want to create a macro that will be able to grab the values from the new file and update the spreadsheet I have. I tried to create a macro when you type the name of the file you want to the linked cells to, and she copy that and replace a formula that is already defined, so I'll be able to get new values. I'll show you an example below.

  Front of Macro

  Enter the name of the file: 12345

  (Part 1): = 'S:\MATERIALS\RAW matiere\ [135.xlsx] PURCHASE! $D $11

  During the Macro

  Enter the name of the file: 12345

  (Part 1): = 'S:\MATERIALS\RAW matiere\ [12345.xlsx] PURCHASE! $D $11

  (replaced the file name 135 with 12345)

  When I did that it worked, but my problem is that whenever I entered a new file name so that it is updated (for example 987), the cell would just update with the file I recorded the macro with (12345).

  If someone has a code VBA or other suggestions, I would really appreciate it! If you need me to explain more about this, feel free to let me know. Thank you

  The command of VBA macro to set the formula in a cell is:

  Range ("a6"). Formula = "= 1 + 1.

  
  This would create cell A6 of the formula "1 + 1 =", and the cell afficheraient a 2 it.

  Here is a full function VBA, you can use and customize.  Simply paste in your VBA Editor to use.  You can see the string which is the formula is to break with the prompting text in the middle.

  Void macroFunctionName()
  As Variant Dim promptText
  promptText = InputBox ("What number to the file name?", "Type number please")

  Range ("a6"). Formula = "='S:\MATERIALS\RAW matiere\ ["promptText & ".xlsx] PURCHASE '! $$D 11 "
  End Sub

• Update QSettings value directly

  Hello

  How to update QSettings, I'm directly when you're using QSettings save value when close app and then display value not directly.

  I need this type when changing color title bar.

  Thank you.

  Here is another solution

  applicationui. HPP

  class ApplicationUI : public QObject
  {
      Q_OBJECT
      Q_PROPERTY(QString onDataChanged READ onDataChanged NOTIFY dataChanged)
  public:
      ApplicationUI();
      virtual ~ApplicationUI() {}
  
      Q_INVOKABLE
      inline QString getValueFor(const QString &objectName, const QString &defaultValue)
      {
          QSettings settings;
          if (settings.value(objectName).isNull()) {
              return defaultValue;
          }
          return settings.value(objectName).toString();
      }
      Q_INVOKABLE
      inline void saveValueFor(const QString &objectName, const QString &inputValue)
      {
          QSettings settings;
          settings.setValue(objectName, QVariant(inputValue));
          emit dataChanged();
      }
  
  signals:
      void dataChanged();
  
  private slots:
      QString onDataChanged() const { return QString(); }
      void onSystemLanguageChanged();
  private:
      QTranslator* m_pTranslator;
      bb::cascades::LocaleHandler* m_pLocaleHandler;
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  Then on QML use it like this

  import bb.cascades 1.2
  
  Page {
      Container {
          Label {
              // Localized text with the dynamic translation and locale updates support
              text: app.getValueFor("title", "Hello World") + app.onDataChanged
              textStyle.base: SystemDefaults.TextStyles.BigText
          }
      }
  
      actions: [
          ActionItem {
              ActionBar.placement: ActionBarPlacement.OnBar
              title: "Change value"
              onTriggered: {
                  app.saveValueFor("title", "Change value")
              }
          }
      ]
  }
  

  Use this workaround, your values will be updated as you change them.

  It is a solution even as a Retranslate.onLocaleOrLanguageChanged.

  This will help you