Upgrade memory Dell R410

Hello world!

I have Dell R410 2xE5506 6x2Go Hynix DDR3-1066 PC3-8500th non - Reg ECC RAM 2Rx8

Now I need 32 GB of memory. I want to take out the 2 GB memory and put 4x8Go (for example this one).

Issue.

This memory will work in my server? Confused, low voltage and the manual is written as follows:

Intel Xeon 5600 series also support s Low Voltage DIMM and parsimonious feature (Manual)

voitsykh
is ok - I have processor e5500 series? It will work with memory low voltage?

Yes, it will work. LV memory is able to operate at 1.35 or 1.5 volts. Since the 5500 series does not support LV memory DIMMs will operate at 1.5V.

Thank you

Tags: Dell Servers

Similar Questions

  • Upgrade memory Dell Dimension 9150

    Hello

    I'm looking to upgrade memory RAM on my Dell Dimension 9150 Dual Core (DXP051) clocked at 2.8 GHZ with 1 GB of ram. Motherboard is Dell 0YC523. IGB memory currently.

    Watching the RAM is OCZ Enhanced latency Platinum XTC Edition revision 2 with speed 800 Mhz - CL4 (4-4-4-15) latency. 2 GB

    OCZ recommendation is to increase the volatge of ram to 2.1V on the BIOS but I don't think that this is possible on the Dell motherboard.

    Previousposts research, someone also asked a similar question but for an XPS 720 PC.

    The solution suggested something about SLI or EPP ready... I'm not sure what it means. This means that the RAM must be SLI or EPP ready to be compatible with the motherboard of Dimension I or the mothersboard must be ready for use of these modules of memory SLIp/PPE? Can I use this module and if so, how do I change the voltage or the motherboard will adjust it automatically?

    If not, can I get some other RAM?

    Thanks in advance.


  • Upgrade memory Dell R710

    Hello

    For r710 Server I bought a kit of memory: 2 pieces of 8 GB.

    The current Ram configuration is 4 modules of 2 GB each.

    the server is dual CPU, so the memory are in A1, A2 and B1 B2.

    could you please help how to organize to DIMM, so it can walk with each of them.

    Separately, it works but not together, and I tried different configurations.

    Thank you

    When mix you them, the server turns on and cross the message "Memory Configuration"? If the system is able to bypass any configuration problem he would then invite accurately (such as available memory can be reduced, cannot put X in X slots etc.).

    Make sure that your BIOS is up to date (6.4.0) for memory support more up-to-date. If you need to update the update of the BIOS of the controller of life cycle and thus if necessary iDRAC. The standard Dell support answer is that these three elements must be on the current versions.

    If it works with the 2x8Gb and 4x2Gb separately, make sure that you try not not mix registered and ECC Registered memory. If the server does not initialize correctly it is likely. Google search to check part numbers.

    Check whether the mode of BIOS memory is Optimizer

    Put the two 8 GB in A1/B1

    Put four 2 Gb in A2/A3 B2/B3

    Let us know how it goes!

    Note: This answer is based on my own experience of the R710 and I'm not a member of Dell support, just an end user. Best responses of others may follow.

  • Upgrade memory Dell PowerEdge T610?

    Hi, I have a T610 with 8 GB (4 x 2G 2Rx8 PC3-8500R). I would put more than 8 GB, (4 x PC3-10600R 2 G 2Rx8). Works? What is the best setting?

    [of]

    Hello.

    How many processors you have installed?  There are several guidelines of population of memory including memory on all channels balanced for optimal performance.

    For a single processor, you will only be able to use six modules because of this limitation, where:

    A1, A4, A2A5, A3A6: 2GB with capacity of 12 GB total memory

    For the two processors:

    A1A4, A2A5 & B1B4, B2B5: 2GB gives the ability of memory of 16 GB. I advise to use strips of memory ability higher such as 4 GB, 8 GB, or even 16 GB because they offer memory expansion more and robust.

  • Upgrading memory Inspiron 3646

    I'm trying to upgrade memory of 4 GB to 8 GB 64-bit Windows 10. I added Crucial only 8 GB DDR3 1600 MT/s (PC3-12800) CL11 SODIMM 204 pins laptop 1.35V/1.5V CT102464BF160B memory to the system, there is only 1 Bank and system does not start. I thought that the new memory might be bad, so he ordered a new memory. Same results.  According to the manual of Dell, I just take the old memory and add the new.  Any help will be appreciated, thanks in advance.

    I plugged the new memory of Dell yesterday and it worked perfectly.

    Thanks again.

  • Upgrade memory on an all in a single LX830

    I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

    Well, mainly upgrade memory depends on the support of the chipset/CPU.

    Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

    A property used by a 4 GB RAM module and housing is free.
    This is why it must be able to use another additional module of 8 GB RAM.

    But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
    Otherwise, you will get some compatibility issues

  • Upgrade memory on NB300-108

    Looking to upgrade the RAM to 2 GB on my NB300-108

    Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

    Would like to receive experiences in the forum about alternatives etc.

    Thank you

    Hello

    The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
    These modules are provided by different companies.
    There are good quality modules and less quality modules

    Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

    I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

  • Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

    To anyone who thinks of a memory upgrade on the NB550D:

    The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
    Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

    I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

    Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

    It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

    Thanks for the comments

    Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
    So to use all of the 4 GB RAM 64-bit system is required.

  • Question about upgrading memory Satellite M55-S1001

    can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

    Hello

    First of all, if you want to go for fastest laptop, you should start with simple things.
    Try to defragment the disk, turn off the background process is not necessary, etc.
    Upgrade memory will the powerful laptop and of course a lot more quickly.

    To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

  • I have iMac 5 k mid 2015 upgrading memory

    How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

    Installation video are visible by clicking on

    http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

  • Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

    Upgrade memory L50 - A - 1 5 pskk6e

    I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
    memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

    I tried to mount only the new but it won't start.

    Some ideas?

    I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

    But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

    I found modules recommended by Toshiba.
    These are:
    8GB DDR3L - 1600 PA5104U-1M8G
    4 GB DDR3L - 1600 PA5104U-1M4G

    Both are made of Kingston and the specifications are:

    Memory speed: 1600 Mhz PC3-12800
    Capacity: 8 GB (1x8GB module)
    Pins: 204 SODIMM
    Type of RAM: DDR3 SODIMM
    Verifying the integrity of data: non ECC
    Specifications:
    Latency (CL) CASES: 11
    Voltage: 1.35v

  • Upgrade memory for Satellite 2800 400

    I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

    Hi Ben

    Maybe you used the memory modules bad.
    As far as I know that you can upgrade memory for max 192 MB
    The 64 MB has been installed in an internal memory and cannot be deleted.

    I found these compatible modules:
    PA3003U - 1 M 03 32 MB
    PS3004U - 1 M 06 64 MB
    PS3005U - 1 M 12 128 MB

  • Upgrade memory for Equium L20-264

    Hello

    I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

    Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
    -Windows® XP Home Edition
    -60 GB hard drive
    -256 MB DDR2 RAM
    -15 "TFT color display
    -Drive DVD Super Multi (Double Layer)

    Issues related to the:

    1. How can I remove the existing memory? Is there a guide of the user on this operation?

    2 How many slots have?

    3. What is the max memory per slot?

    4. can I buy Toshiba memory directly?

    It is rather urgent and would like a quick answer.

    Thanks in advance
    Rag99

    Hi mate.

    As far as I know your laptop supports two memory locations.
    They must be placed at the bottom of the unit.
    If you n t know how to change this then I recommend consulted the user manual!
    The manual can be downloaded from the Toshiba European page.
    I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

    PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules

  • HP ENVY Sleekbook 4-1000en: upgrading memory on ENVY 4-1000en

    Hello

    Since I have some basic computer knowledge, but I want to be sure before you go for it, I need your advice.

    I have a HP ENVY Sleekbook 4-1000en and I have recently upgraded to HDD and the OS.

    I think the upgrade of RAM have, as far as I know that you need 2 memories of the same type, so I guess I can't buy an another 4 GB right?

    Do I need 2 x 4 GB of DDR3 memory, of the same type to make it work? For example they would work very well

    http://www.corsair.com/en/vengeance-8gb-high-performance-sodimm-memory-upgrade-kit-cmsx8gx3m2a1600c9 ?

    Finally the upgrade memory requires any other configuration after plugin in? Is a format for example?

    Thanks for your time.

    Hello

    The following link shows the specifications of your computer:

    http://support.HP.com/us-en/document/c03362810

    It has 4 GB of RAM now. The question is 4 GB in a dwelling or in the two slots (2 + 2).

    b in the case of a home, you can just buy another 4GB with SAME part/characteristics of the EXISTING RAM and install in the second slot.

    (b) if in 2 slots (IE 2 + 2), then throw them both and buy 2 new sticks 4 GB each. Agin use even care.

    You don't need to format RAM. Moreover, we have only to format HDD/SSD but not RAM. And Yes, push in the two slots must be same same specs even marks to be able to get all the benefits.

    Kind regards.

  • Satellite Pro 2100 - upgrade - upgrade memory RAM

    Hello together!

    For your information:

    Upgrade memory today to 2 Toshiba Satellite Pro 2100 (1.9 GH, 256 MB DDR - RAM initially), both up to 1 GB, all fine and no problems.

    Wanted to just end rumors "only 512 MB all together" or even less.

    If you are looking for, don't forget to think of the specifications:

    DDR-266 (PC2100)
    DDR-SDRAM, SO-DIMM
    200 PINS
    2.5 CL

    concerning the frequency of the RAM, building shape etc.

    Greetings

    L0nestar

    P.S.: Don't think that a debate is necessary, thread could be closed...

    According to the specifications of the computer laptop Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have confirmation on the RAM upgrade for this model of laptop old but still good.

    Good day.

Maybe you are looking for