Upgrade memory M50-130

Similar Questions

• Upgrade memory M50 satellite problems

  Hello

  I just tried to add 516 MB in my expansion memory slot, but the extra memory has not been recognized. Notepad starts fine, but only shows 465 MB of available space.

  I tried to change the original and new memory cards, and either card in a slot (0 or 1) on their own works as a 516 (which turned the cards and the two slots are working), but together they always show as only in use.

  Someone at - it ideas on what could be the problem and how to make so that he can use them together?
  Thank you

  The 465 MB is normal, because of the shared video memory. If I understand you correctly, the two connected modules, show only 512 MB?
  Perhaps you need to perform a BIOS update. Could help. You can find an update to the emea support & download page.

  The two modules comply with the necessary specifications? They should be PC2700 DDR - RAM.

• Satellite M50-130 does not BSOD appears

  The M50-130 apparently won't let you run unless it is on the lowest power setting imaginable. At first I thought it was windows, reinstalled, even tried linux, same blockages.

  Blockages were handed over to instant zero or random messages on the BSOD. He continues to go with power setting as low.

  The strange is that he is not a homogeneous heat since I left it off and even without a block or anything plugged for hours and even in this case got the symptoms. To make it work, the only way is to leave the lowest imaginable setting on the thingimagy of power on the taskbar on the cpu and leave it there.

  I have used it on the establishment of an average of one day and worked, but then he hooked again on a game.

  I thought at some point it is the RAM, nope, checked and was not the only mistake I could get on the verification of memory, but a blocking/total system reboot.

  Then I thought it was the omega drivers, I replaced the with the default drivers of toshiba, always the same. Of course, I'm afraid that these driver updates could have a damaging effect, but anyway.

  The behavior of the random/blockages on BSOD messages seem to be quite randomly, but it seems to stabilize when I boot just windows and leave it on a lower power setting, I did ('1' constant cpu, consumption of energy optimal or 2 ")

  There is no guarantee and I really need a laptop NOW, so you'll understand that I'm left with two options: either quickly fix any way I can, or just buy a new laptop.

  Hello Lela

  Your troubleshooting is really impressive and everything you've tried is good, but you should ask yourself is it really something else you can try? I don't think so. If the problem persists after the installation of clean operating system (recovery image) then there must be a serious problem. I can't say with certainty what may be the problem but the technicians of the authorized service provider.

  Make a call and let check the laptop. They may be able to fix this YOUNG.
  Sorry, but I don't really see another option for you.

  In the end I just say: compare the price of repairs with prices of some new notebooks and I believe you all need to make the decision.

• Extension memory M50-159: what model?

  Hi all

  After extensively searching the toshiba site, I can't know exactly what model of memory, I needed to upgrade my M50-159.

  Oops, sorry! Expelled a bit fast on the original question and the site allow me to modify my original post.

  Hi all

  After searching the toshiba site, I can't know exactly what model of memory, I needed to upgrade my M50-159.

  I want to give my M50 one additional gigabyte. Should I PA3313U-1M1G or PA3313U-2M1G?

  Thank you very much in advance.
  Daniel.

• Upgrade memory on an all in a single LX830

  I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

  Well, mainly upgrade memory depends on the support of the chipset/CPU.

  Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

  A property used by a 4 GB RAM module and housing is free.
  This is why it must be able to use another additional module of 8 GB RAM.

  But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
  Otherwise, you will get some compatibility issues

• Upgrade memory on NB300-108

  Looking to upgrade the RAM to 2 GB on my NB300-108

  Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

  Would like to receive experiences in the forum about alternatives etc.

  Thank you

  Hello

  The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
  These modules are provided by different companies.
  There are good quality modules and less quality modules

  Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

  I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

• Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

  To anyone who thinks of a memory upgrade on the NB550D:

  The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
  Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

  I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

  Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

  It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

  Thanks for the comments

  Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
  So to use all of the 4 GB RAM 64-bit system is required.

• Drivers XP for Satellite M50 - 130 PSM51E required

  Hello

  I think I may have made a big mistake.

  An elderly parent gave me his Toshiba Satellite to "clean". I just ahead and reinstalled XP Home on thinking that I could simply reinstall all drivers by downloading the Toshiba web site. (as I have done for other portable parents)

  XP Home installed using an existing drive and use the MS code on the label under the lap top.

  However, I am now very nervous because I can't find the drivers on the Toshiba web site for this product and I have a load of unknown/other devices in Audio/video/ethernet/mass storage device manager.

  I took a guess at the wireless driver and have wifi work so I'm online and you have activated Windows.

  Can someone point me in the right direction for all drivers please.

  Model is
  Satellite M50-130 PSM51E

  Thank you very much

  > I'm still looking for the wired ethernet driver
  Are you looking for driver Win XP LAN?
  Check this one: [v Marvel LAN Driver 8.24.3.3 for Win XP | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 192 & selSeries = 237 & selProduct = 587 & STAS hortMod = 414 & language = 13 & selOS = 10 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 42510 & OSI D = 10 & driverLanguage = 42]
  ?

• Question about upgrading memory Satellite M55-S1001

  can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

  Hello

  First of all, if you want to go for fastest laptop, you should start with simple things.
  Try to defragment the disk, turn off the background process is not necessary, etc.
  Upgrade memory will the powerful laptop and of course a lot more quickly.

  To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

• I have iMac 5 k mid 2015 upgrading memory

  How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

  Installation video are visible by clicking on

  http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

• Satellite M50 - 130 - Touch and launch software does not

  Hello

  I recently had my reinstalled M50 - 130 as he had a huge virus problem and the man who did it, did not reinstall all my drivers and utilities, so I've downloaded from the Toshiba page.

  Problem I have is that the software ' touch and launch "doesn't appear when I clicked through my Start menu or via my computer, I tried, put it back, but not luck. Anyone got any ideas? Because miss me it!

  Thank you!

  Hello

  The launch and the Touch utility is available on the European driver from Toshiba website. It s a 1.2.7.0 version. The Touch and the launch is a program to facilitate various functions using the touch pad.
  After installation, you should see it in the touchpad settings.

  You know the installation of drivers and tools?
  It s a little more tricky, the proper installation order is necessary to run the application correctly.
  You can find the installation instructions in the document of Toshiba, which was placed on the driver page.

  Believe me, many years ago, I was a newbie to Toshiba, but since several facilities of OS on my two computers laptop Toshiba, I discovered that the proper installation order is very important and necessary.

  So check it out buddy

• I want to replace the 40 GB HDD on Satellite M50 130

  I want to replace the hard drive, because it becomes unreliable, but can't fnd the specs.
  Can someone help with the exact specifications please?
  Is the drive IDE or SATA?
  Size = 2.5 inches?

  I think the original size is 40 GB, can I replace it with any size?

  Did the removal and easy replacement? Are there instructions please?
  I have a horrible feeling that there may be data recovery for the operating system on a hidden in the drive partition.

  Is this correct? May only be transferred to a new hard drive?
  Thank you very much
  Nick

  Satellite M50-130 has been delivered with the 2.5 "60 GB HARD drive.
  This HARD disk supports a rotational speed of 5400 RPM and it supports an improved IDE (ATA 6) interface.

  If you need a HDD IDE and not SATA

• Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

  Upgrade memory L50 - A - 1 5 pskk6e

  I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
  memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

  I tried to mount only the new but it won't start.

  Some ideas?

  I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

  But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

  I found modules recommended by Toshiba.
  These are:
  8GB DDR3L - 1600 PA5104U-1M8G
  4 GB DDR3L - 1600 PA5104U-1M4G

  Both are made of Kingston and the specifications are:

  Memory speed: 1600 Mhz PC3-12800
  Capacity: 8 GB (1x8GB module)
  Pins: 204 SODIMM
  Type of RAM: DDR3 SODIMM
  Verifying the integrity of data: non ECC
  Specifications:
  Latency (CL) CASES: 11
  Voltage: 1.35v

• Upgrade memory for Satellite 2800 400

  I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

  Hi Ben

  Maybe you used the memory modules bad.
  As far as I know that you can upgrade memory for max 192 MB
  The 64 MB has been installed in an internal memory and cannot be deleted.

  I found these compatible modules:
  PA3003U - 1 M 03 32 MB
  PS3004U - 1 M 06 64 MB
  PS3005U - 1 M 12 128 MB

• Upgrade memory for Equium L20-264

  Hello

  I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

  Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
  -Windows® XP Home Edition
  -60 GB hard drive
  -256 MB DDR2 RAM
  -15 "TFT color display
  -Drive DVD Super Multi (Double Layer)

  Issues related to the:

  1. How can I remove the existing memory? Is there a guide of the user on this operation?

  2 How many slots have?

  3. What is the max memory per slot?

  4. can I buy Toshiba memory directly?

  It is rather urgent and would like a quick answer.

  Thanks in advance
  Rag99

  Hi mate.

  As far as I know your laptop supports two memory locations.
  They must be placed at the bottom of the unit.
  If you n t know how to change this then I recommend consulted the user manual!
  The manual can be downloaded from the Toshiba European page.
  I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

  PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules