Upgrade or replace ColdFusion 9 and 7

Similar Questions

• I would like to purchase an update for my 2009 of LabVIEW Student Edition and get the 2013 of LabVIEW Student Edition. Do I have to remove the 2009 before making the purchase?, or the update/upgrade will replace the old and the new?

  Anyone or care to comment on that?

  Must be installed side by side with the old version.  No need to uninstall.

  (Save the long question for the body of the message and use a decent short title for the subject, so does not meet your question to the top of my screen of forum LabVIEW.)

• Satellite P300 - upgrade to larger hard drives and 7200 RPM?

  I have a Satellite P300, model PSPCCA-01W073 (sold in Australia). Machine has two 320 GB of HARD drive. Yes, it's all up to 640 GB. I upgraded to Windows 7 OS and I have dual boot in to Linux Ubuntu.

  My job is editing/processing of multimedia files big and my hard drives are overexploited, so I now I am forced to exchange large files back and fourth with various USB hard drives. If I can replace the existing readers with much larger models, then I will go ahead and do it. .. But at this point, I'm out of my depth!

  I asked the support from Toshiba if P300 supports larger disks but they will not engage all the answers outside the original specifications. They suggest that I should try Toshiba users forum for more help.

  A kind person could tell me if it is possible to run drives 320 GB and the size. Also, I believe that the existing drives are 5400 RPM. My online store parts and pieces of local computer lists a choice between Hitachi, WD, Seagate and Samsung with sizes:

  (2.5 "/ 5400 RPM") 320 GB, 500 GB, 750 GB and 1 TB as well as sizes: (2.5 "/ 7200 rpm") 500 GB, 640 GB and 750 GB.

  So my second question; y at - it no advantage or disadvantage to the superior speed of 7200 RPM.

  TIA, your help should prevent to me yet an another expensive blunder.

  Longbow-00

  Hello

  Theoretically more big hard drives must be supported and should not be a big problem to use this HARD drive as the SATA controller is not limited to any size.

  Also the use of the faster HARD drive 7200 RPM should not affect the performance of the laptop even if this HARD drive faster produce more heat

  In my opinion you can upgrade to a larger and faster HARD drive

• Replacement card wireless and power p7-1254

  1. what type and where can I find the exact same as found in the tech specs page in the link below?
  
  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=5187022&... Also, where can I find this card on the motherboard? I don't see or I could have missed it.
  
  3. Moreover, if I were to upgrade the processor, which will be I need and how to replace the CPU?
  
  4. What is the recommended CPU to run at the same power original power supplied with my computer when I first bought it?
  
  5 How can. one last thing, I upgrade and replace the graphics card if this computer comes with the integrated graphics card of base/stock/default on this computer?
  
  I'm not very tech savy, or a computer programmer/Assistant. Help, please. Thank you!

  This is the original factory specifications for your desktop HP Pavilion p7-1254. Here are the specifications of the card mother AAHD2-HY (Holly) installed on your computer.

  (1) wireless card and its location;

   

  

  (2) CPU upgrades;

  Image AMD A8-3850 (Liano) 100W
  Image AMD A8-3800 (Liano) 65W
  Image AMD A6-3650 (Liano) 100W

  No need to replace the power supply to allow an upgrade of the CPU.

  (3) graph and power upgrade;

  This computer using integrated graphics supported by the motherboard and APU. Installation of a discrete graphics card will automatically disable the integrated graphics card. This model supports a v2.0, v2.1 or card discrete graphics PCIe x 16 v3.0 Specification v2.0. For all but the most basic graphics cards, you will need to supply. I suggest using the power supply Corsair CX500, CX600, CX500M, and CX600M.

  Please see HP - addition / replacement of material and select the appropriate necessary topic for instructions.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I had to replace my motherboard and processor, now it will not except my vista OS disk because it is a disc of high level

  My mother had crashed so, naturally, I replaced it with a much better and bigger processor, but now it will not except my Vista OS disk because it is a high quality disc.  My question can get just the windows upgrade version 7, or do I have to get the full version?

  You have to buy a complete new installation of Windows 7.

  Upgrade version of Windows 7 is good to upgrade a previous version installed and activated Windows.

• Impossible to reinstall windows 7 upgrade after replacing motherboard failure

  My motherboard and cpu has crashed, replaced by MB and CPU upgrades. Windows would not start... Then I reinstalled my windows7 Home premium from the DVD I bought to upgrade XP. Installation went well until the activation program. No go says no valid, reentre activation code code same thing. an idea

  Skip entering product key and complete installation and the attempt to phone activation.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Problem of DH handshake with the web service using ColdFusion 7 and 8 after java update 8

  ColdFusion 7 and 8 are provided with a variant of JRE1.6.

  I have a script that has consumed a web service for years with success.  Last week, the web service provider updated their version of Apache and Java on the server java 1.8 (or java-8).

  I could no longer consume the web service once the web service provider updated to Apache and Java and would be the following error DH keypair every time that I try to consume the service:

  -----------------

  AxisFault

  faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.userException

  faultSubcode:

  faultString: javax.net.ssl.SSLException: java.lang.RuntimeException: could not generate keypairs DH

  faultActor:

  faultNode:

  faultDetail:

  {}http://xml.apache.org/axis/} stackTrace:javax .net .ssl .SSLException: java.lang.RuntimeException: could not generate keypairs DH

  at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:190)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1591)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1554)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1537)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1130)

  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1107)

  at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:186)

  to org.apache.axis.transport.http.HTTPSender.getSocket (HTT... ''

  -----------------

  I asked the service provider web, why it would stop working and how we can solve this problem.  They suggested that upgrade to the latest version of Java on my server running ColdFusion.  I did some research and found the problem to be with the amount of memory allocated to the variable containing the encryption key.

  The big problem is when I tried to update java on this particular server (Windows Server 2003), the installation has returned a messaged stating that he could not run on the older operating system and I need to update my OS to install java.

  Does anyone have a workaround in ColdFusion 7 or 8 that you can establish the DH handshake using Java 1.6 on your local server while consuming a web service on a server using Java 1.8?

  Hi, frank000000,

  I know that we had a serious problem with any Java 7 after update 25.  They are off a lot of network permissions and other things, for safety, that used to be available in versions prior to the update 25.  But it's while we were in CF Server 9.

  Since we switched to CF Server 10 (making sure that we got the CF Installer provided with Java 8), we had very few issues related to Java.

  It seems strange to me that the upgrade to 1.8 host while your server is 1.6 would cause problems.  It could very well be something else.  I would like to ask the host for documentation describing exactly how/why their 1.8 may cause interference with your 1.6.

  HTH,

  ^_^

• Can I upgrade directly from ColdFusion Enterprise 9 to 11 of ColdFusion Enterprise without first 10?

  Can I upgrade directly from ColdFusion Enterprise 9 to 11 of ColdFusion Enterprise without first 10?

  For those who have done this,

  1. what weirdness you found that you had to overcome in your installation (I know of that everybody's environment is different and product differest results)?

  2. what part of your broken code for which you find fixed?

  Tips and suggestions for installation smoothly, not to mention the document to install the suite.

  Thank you!

  Create a car (file from archive) in the CF 9 enterprise that will capture all the CF 9 settings such as data sources, Web services, etc. Make sure that when you do this, pop up blocker is disabled.

  NOTE : when the file was created to archive, give full name by the absolute path in the name of the package. For example C:\Test\mypackage.car

  Then move the car file in the server where you want to install CF 11. Install CF 11, and then deploy this compressed file (car). All CF 9 settings will be migrated to CF company 11.

  Otherwise, if you want to install 11 CF on the same server where CF 11 is installed, then remove the connector for all sites that are configured with CF 9, make sure that the CF 9 services running, and then run the program at the end of the installation of 11 CF and CF 11 installation, you will get a dialog box asking you to migrate settings cf CF 9 11.

  Run the Code parser in CF 11 administrator to verify whether or not all of the CF 9 used in your application code breaks into CF 11

  HTH

  VJ

• ColdFusion 10 and Ebay Web Service WSDL

  Hi all

  We have recently upgraded to Coldfusion 8 to 10 of Coldfusion and we found a business-stopping bug:

  In the Administrator console in Coldfusion 10 GB of DATA & SERVICES-> Web Services.

  It adds a web with link WSDL service http://developer.eBay.com/webservices/latest/ebaySvc.WSDL

  Other input values have no effect in this issue.

  You will then receive a Coldfusion error:

  Model: /CFIDE/Administrator/extensions/webservices.cfm

  Diagnostics: javax.wsdl.Operation.getExtensionAttributes (Ljava/util/card); null

  The error occurred on line 141.

  Same error if you try to instantiate a web service to ebay object with data inside the cfscript WSDL.

  It is a show serious Cap because ebay API no longer work with Coldfusion 10 and we were forced to a restore to Coldfusion 8.

  Any help would be much appreciated!

  P.S. other WSDLs non-ebay seem to add fine to CF10.

  Adam, the web service consumption will also be affected. The version decides what framework is used to generate the client-side stubs.

  DmitriD, could you please post the code used for the test. Where did you try to set the version? Set the version in CreateObject() or CFInvoke to consume. If you change the wsversion of server level, it is used by publishing only.

  WS = createObject ("Web service", "http://developer.ebay.com/webservices/latest/ebaySvc.wsdl", {wsversion = "1"} ");

  WriteDump (ws);

  I tried the above code and it works fine for me. Please check and let me know.

  Thank you

  Paul

• spinning cursor, stands, front, upgrade to El Capitan, upgrade to internet high speed and added SSDS but no change

  I just wheel spinning, lasted about 30 seconds.  Frequently, before and after the upgrade.  Add a SSD and increases internet speed from 10 to 25 - no visible change in the stalemate.  At the end of the present statement said that it has been updated about an hour ago.

  Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple Support personnel) of the CSA to provide an overview of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  

• Just upgraded to 42.0 Firefox and background color setting doesn't work anymore - an empty window is always white.

  I just upgraded to Firefox 42.0 and, unlike previous versions, the setting of background color in 'Content' no longer works. In the settings page, the indicator 'Background colour' changes the color I choose (not white) in the choice of color theme, but each time I open an empty window background color is always white. Then, when I return to the Setup page to verify that the indicator still shows the color that I chose. And I have check the box 'Use the system color' or not there are tick, the result remains the same: the background color of an empty window is always white.

  It is a problem I've never met before. I would like to know why.

  Thanks for any help.

  You can make only one rule:

  @-moz-document url(about:blank), url(about:newtab){ html,body {background-color: #ccc !important } }

• I just replaced my battery and it says 'battery of Service '? The battery is new. I need to reset something?

  I just replaced my battery and it says 'battery of Service '? The battery is new. I need to reset something?

  Try resetting the SMC http://support.apple.com/kb/ht3964

• I just upgraded to FireFox 22.0, and now I get a Javascript error (error: illegal operation on the prototype of a WrappedNative object). What can I do?

  I just upgraded to FireFox 22.0 and am now a bunch of Javascript error windows when I try to sue for Gmail. The error message is: error: illegal operation on the object prototype WrappedNative

  'Disable your modules and add one by one (each requiring a reboot). If you have some sort of add-on downloader, this can be in conflict with your java/web browser. Hope this helps.'

• I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

  Question
  I just upgraded to FF 3 FF9 and in the process lost my 'New tab' button, and there isn't one in the view > customization window. So, how manually open a new tab in FF9?

  To open the window to customize the toolbar, do one of the following:

  • Firefox button > Options > toolbars
  • Press ALT or F10 to temporarily show the Menu bar and choose from there (view > toolbars > customize)
  • Hold DOWN the ALT key while pressing the VTC keyboard letters

  See-> https://support.mozilla.com/en-US/kb/common-questions-after-upgrading-firefox-36

  Regarding the new button tab, you see the end a '+' after the last tab or the right of the tab bar? This is the icon of the new tab.

  • CTRL + T will open a new tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• I need to replace the battery and AC adapter of the Satellite Pro U400-160

  I have a Satellite Pro U400-160.

  I need to replace the battery and the charger of my Toshiba, but I am wary about compatibility issues.

  Any battery for Satellite Pro U400 is suitable for mine?
  As I can't find which batteries are specifically suitable for my computer.

  (For example: is this a: http://www.amazon.es/Bater%C3%ADa-Toshiba-Satellite-U400-11V-7800mAh/dp/B0051A9Y88/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1366885340&sr=1-2-catcorr&keywords=satellite+pro+u400?)

  Is there a quick way to check if a battery / charger are compatible?

  Each battery and adapter you get from Toshiba has specific part number. All you have to do is use this same part number and order. You should be able to find on the internet.
  You can also get compatible parts you are ordering by the Toshiba authorized service provider in your country.

  By the way: all U400 models have the same construction and the similar specifications then all the batteries specified for U400 can be used on your U400-160.