Upgrade RAM to HP DV7 2220 ev, which?

Similar Questions

• HP Pavilion dv7 6b13ev: upgrading Ram HP pavilion dv7 6b13ev

  Hello

  Can someone tell me if it is possible to upgrade the ram on the dv7 6b13ev 8 GB to 16 GB?

  Thank you in advance!

  Hello:

  Because your laptop is the Intel processor and chipset, you can install 2 x 8 GB of memory.

  See Chapter 1, pp 4 & 5 of the service manual on the link below for upgrade memory info.

  http://h10032.www1.HP.com/CTG/manual/c03043778

• Problems upgrading RAM on Pavilion DV7 Notebook PC

  I know that it is an old machine, but still good.

  I have the original 4 Mb RAM installed and trying to update this to 8 MB.

  I installed a single module of 8Gb, DDR3 PC3-12800, which seems to be supported according to the carrier material online for this machine.  I see that this RAM is seen in the system BIOS and memory test BIOS passes; However, when I boot to Windows, I get a blue screen that provides actionable information... just a hexadecimal error code.

  I tried the SIM in the two RAM slots with the same effect.

  The RAM I am using is a new module from PNY PC3-12800, spec'd to work in 1066 and 1333 and 1600 MHz and a 1.5V SIM.

  Please help if possible...

  Thank you

  Hello

  The book says:

  2 the customer-accessible/extendable SODIMM slots
  
  Memory DDR3, 1 333 MHz
  Support dual channel supports up to 8 GB of RAM in the following configurations
  ● system memory total of 8192 MB (4096 MB × 2, both channels)
  Memory ● 6144 MB (2048 MB × 1 + 4096 MB × 1) total system
  Memory ● system total of 4096 MB (2048 MB x 2, dual-channel)
  ● 3072 MB total system memory (2048 MB × 1 + 1024Mo × 1)
  2048 MB total ● system memory (1024Mo × 2, both channels)
  2048 MB total (2048 MB × 1) ● system memory

  Now you put 8 GB in a slot then it's not going to work. You have to put 2 x 4 GB. You can use 1.5V, on this machine, 1.5V RAM will use a bit more power and more hot, that's all.

  Kind regards.

• Maximum RAM in a DV7 7205tx? I want to upgrade the RAM in my DV7-7205tx 8 GB to 16GB.

  Hi, I would like to upgrade the RAM in my DV7-7205tx 8 GB to 16GB, but the specifications say that the maximum is 8 GB. I am intrigued by what the DV7-7304tx has been released with 16 GB installed and it has the same processor and the same chipset. Can you please explain why the manual tells me that I can't spend my 2x4gb chips to 2x8GB?

  Much appreciated,

  Greg

  Although not conclusive, the following information suggests strongly that the dv7-7205tx is capable of 16 GB (2 X 8 GB) memory.

  Surfer is part of HP for the product number: C7E80PA - model name: HP ENVY DV7 - 7205TX NOTEBOOK PC lists;

  HP 670034-001 manufacturer / 8 GB 1600 Mhz PC3 - 12800 memory module (SHARED)

  the HP ENVY dv7 Notebook PC - Maintenance and Service of Guide;

  Two customer accessible/upgradable memory
  module housing

  Supported dual channel DDR3 - 1600 MHz
  Supports up to 16384 MB of system RAM

  Supports the following RAM system
  configurations:

  16384 MB (8192 MB × 2; not supported
  on computer models equipped with a 32-
  bits of the operating system)

  12288 MB (8192 MB × 1 + 4096 MB × 1;
  not supported on computer models
  equipped with 32-bit operating system)

  8192 MB (8192 MB × 1 or 4096 MB × 2;
  not supported on computer models
  equipped with 32-bit operating system)

  6144 MB (4096 MB × 1 + 2048 MB × 1;
  not supported on computer models
  equipped with 32-bit operating system)

  4096 MB (4096 MB × 1 or 2048 MB × 2)

  2048 MB (2048 MB × 1)

  and

  (Page 28 - Chapter 3 - Illustrated parts catalog)

  (2, PC3 12800, 1600 MHz) memory modules:
  Number of component spare
  Module of memory of 8 GB 670034-001
  Memory 4 GB 641369-001
  Memory 2 GB 652972-001

  The OP needs to open the memory Bay and check whether 1 or 2 modules of memory are installed and that the part (s) was/is. If a single p/n 670034-001 is installed, the system should have no problem taking another module of 8 GB, the maximum of the motherboard is rated to 16 GB. If two p/n 641369-001 modules are installed, something is fishy, as it departs the HP part Surfer information.

  Please send Bravo

• Portege 4000 - upgrade RAM & graphic card driver installation

  I'm having some trouble with my Portege 4000 for the moment. I installed XP on a disk, but will no longer have that I have 256 MB of RAM...

  -Have you tried 2 manufacturers but the PC133 512 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

  -Consider the options alternative to XP, 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?

  -J' put another post for .exe drivers related to the display/vga for 98SE and 2000.

  -Just for the record, not all Linux distributions seem to go back on the size of the screen, so it takes some work...

  Thanks much for any help.

  > Tried 2 manufacturers but the 512 PC133 is not compatible. However, my system has an IBM of PC100 256 chip, which was bought early last year, after much trial and error, and I wonder now if the motherboard will be more suited to the PC100 and PC133 non?

  The protégé 4000 is compatible with the PC133 modules! AFAIK, you can upgrade RAM of this notebook 1 GB (1024 MB) and you can use these modules;
  PC133 512 MB (PA3108U - 1 M 51)
  PC133 256 MB (PA3086U - 1 M 25)
  PC133 128 MB (PA3085U - 1 M 12)

  > Considering alternative options to XP, namely 98SE or 2000 because they are lighter operating systems. I can put it on a spare drive (test). Is it possible to set up a partition for recovery CD Rom (which has 98SE) on this subject and have little space left over to install another Linux operating system or its Manager partition crushes everything?
  You can create partitions on the HARD drive using a 3rd party like Partition Magic 8 tool. I use this tool and it's really nice.
  After you create 2 or three partitions on the HARD disk, you could install different OS (operating systems).

• Tecra 8100 - upgrade RAM

  There was a discussion here ("Tecra 8100 - upgrade RAM") on the upgrade memory.
  He said that for TECRA 8000 - capacity maximum 256 MB memory (2 x 128). (unlike TECRA 8100 - which can be upgraded to 512)

  Does anyone know if the BIOS change may allow 512 MB with TECRA 8000?

  Thanks in advance,
  Piotr

  Hello

  I don t think that after updating the BIOS on the Tecra 8000, you will be able to use the 512 MB of memory.
  Like you said you can use max 256 MB (2 x 128 MB SDRAM)

• Compaq Presario CQ5720F: upgrading Ram

  I wonder ig this stick of RAM is compatitble with the computer and if the computer can manage a RAM of 8g stick replacing the 3g one.

  Kingston HyperX 8GB 1333 MHz DDR3 CL9 DIMM FURY

  Compaq Presario CQ5720F

  Processor: AMD Athlon II X 2 245
  RAM: 3 g (2.75 usable)
  System type: 64-bit

  Graphic video: Integrated using ATI Radeon 3000 graphics

  My friend's computer is out of memory so that she can't play a game with us. She has need of more memory so I want to upgrade the RAM, but I'm not sure which one to buy.

  Mousu, welcome to the forum.

  This is memory that is recommended by HP to be compatible with its motherboard:

  • Dual channel memory architecture

• Upgrade ram A60 - need help please

  I hope that I will find closure to a long saga Finally, since late September, I looked to upgrade my Equium A60 memory, first of all, I ordered a microdirect Office ram chip (I know I know, really stupid thing to do...), then I ordered the good chip (from microdirect), but it did not work, I recently bought RAM from amazon , but they sent ram stones which, when it is too big for my expansion slot, and when I got the RAM, they sent me the same chip that I received before

  I was ordering pc2100 512 MB SO - DIMM 200 pin, 266 MHz, which has been previously compatible comfirmed in you many on these forums.

  now, I found the ram chip to the: http://www.crucial.com/uk/store/MPartspecs.Asp?mtbpoid=FF2F2894A5CA7304&WSMD=Equiu m + series + A60 & WSPN = CT419100
  crucial who say are compatible, but it is pc2700,.

  This chip compatible, or good crucail evil?
  are also critical a company worthy of confidence to buy online?

  Congratulations to all the

  Hey Jake,

  I can't comment on Crucial given that I have no first hand experience of their products or services, but I used upgrades RAM of Orca logic in the past with no problems at all (I currently have two of their RAM modules in my SA30).

  Their web site has a Finder memory, then I'd say comparing your RAM specifications with Orca. The URL is: -.

  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=14209&ft=m&St=3

  Kind regards

• Upgrading RAM on Satellite L555-10R

  Hello

  I have a satellite L555-10R, Win 7 64 bit, main Board TOSHIBA KTWAA Intel GM45/GM47 chipset, 1.9 BIOS, CPU Intel COre 2 duo P7450;

  I want to upgrade ram 2x2gb (SAMSUNG) to 2 x 4 GB (CORSAIR). Only the ram that I put in the location #1 is recognized as a result system starts and detects 6 GB of RAM. When I put the RAM 2nd Slot #2, the PC does not start. It seems that it does not detects hard (the LED on the front of the PC don't not ligth during startup). I can't go into the BIOS (even if I press the F2 key), black screen, all I can do is power off.

  I'd appreciate your help, if you have an idea.
  Thank you

  VLM

  Hello

  First some general information on your machine:
  Your laptop can be upgraded to the top 8 GB and max upgrade, you can use both modules of memory of 4 GB.
  Compatible 4 for GB DDR3 - 1066 MHz apart number PA3677U-1M4G. Module of memory with this part number is tested and 100% compatible with your device.

  If you check this forum you will find number of threads as your one, where people try to level of RAM using Rams Corsair and spoke of the same problems. Obviously the reason for non-working machine is compatibility issue with these RAM modules.

  The 'value' Modules of RAM use many markets good chips using several banks/channels, which can cause problems of compatibility with some chipsets/CPUS.

  I highly recommend to use high quality and 100% compatible modules of RAM from Toshiba or Kingston.

• Advisor to upgrade RAM to T430

  Dear,

  I plan to upgrade RAM to my T430 with 4 GB RAM stick. I don't know which is the best between additional upgrade of another stick of RAM to 4 GB or 8 GB. I want my T430 running with RAM dual channel, so what should I choose for the best performance of my laptop?

  Everyone has experienced this situation please take the time to give me your advice. Thank you very much.

  I put two sticks of 8 GB in my DDR3 T430s. is now very expensive. I paid one more a few months, but I've seen 2x8GB 1600 MHz DDR3 for as little as $50 last week.

  I agree that 16 GB may seem exaggerated, I think it will be long term option best and lowest cost. I now maximum RAM I can put in my T430s I have benefit from this extra RAM being able to minimize, or even completely disable paging. This makes my system run faster.

  If I put in less RAM now, for example a single stick 4 GB or 8 GB, and then when I need to be upgraded in the future I'd RAM more of rest have of and DDR3 price would be probably much higher than today. (Consult prices of previous generation DDR2 today.) "I expect that the same thing will happen to DDR3 after DDR4 comes out.)

• HP Pavilion 15 laptop: upgrade RAM

  Hello

  I want to upgrade RAM of my laptop. Should what kind of product I buy? Specifically, please.

  I would like to expand the capacity of the RAM as much as possible.

  It's the number of the product you need: F9G45EA #ABZ.

  Thank you very much.

  Best,

  Marco Boschi

  It is the 15-n233sl model and the plug you have 6 GB. See page 42 of the manual here:

  Repair manuals

  The manual indicates that it takes up to 12 GB which is a 4 GB and 8 GB module to the module but regularly, users have reported success with 2 x 8 GB for a total of 16 concerts. For most of the users 8 GB is a lot and it would mean just remove the module from 2 gig you have now and its replacement by a 4 GB. What that you choose to do I would have 2 modules size even for enable support dual channel. 8 concerts running dual channel is likely to be just as good as 12 concerts running in single channel due to incompatible modules. HP part numbers:

  Memory 4 GB 691740-001 module

  Module memory 8 GB PC3L 12800 1600 Mhz SHARED 693374-001

  Module memory 8 GB PC3 12800 1600 Mhz SHARED 670034-001

  http://www.Amazon.com/Kingston-Technology-PC3-12800-KTH-X3CL-8g/DP/B00D74FQ0U/ref=sr_1_3?ie=UTF8&QID=1451156733&SR=8-3&keywords=693374-001

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• 122ne HP 15R: upgrading RAM

  I have the HP laptop 122ne-15R (i7-4510U, 4 GB DDR3 1600 MHz RAM, 500 GB of HDD, OS 64 - bit Windows 8.1). I want to add an another slot with 8 GB of RAM and make the total of 12 GB of ram in my notebook. My questions are:

  My hardware and the operating system will support 12 GB of ram?

  This who should I take care of everything by purchasing a new RAM chip?

  How much RAM my system can support a maximum?

  Change the RAM will improve my performance of system or it will degrade the overall performance?

  What is the maximum amount of RAM that I can add to my system?

  Hello @Biren_,

  Welcome to the HP Forums!

  I read your message and understand that you want to upgrade the RAM in your laptop HP - 15-r122ne. I have studied the issue and have developed a possible resolution in the maintenance and service guide.

  Maintenance and Service Guide (See page 2)

  "1 or 2 customer accessible/upgradable module memory (depending on model) locations.

  "Supports up to 16 GB of RAM in the following configurations"

  Here is a document which will answer your questions regarding the upgrade of RAM

  HP Notebook PC - upgrade (RAM RAM)

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• CC 7100 cmt: questions upgrade ram cmt dc 7100 (please help)

  Hey all,.
  There is history... or you can just go to the section "cut to the Chase" to the bottom of the post

  The long story...
  my name is chris, and I'm trying to help a 14-year-old son, friends learn a lil more on his old pc.

  his pc has a hand and is obviously outdated, I got a bunch of old carcasses of office and let him rumage anything that would contribute to his pc. We found a total of 3 GB of ram ddr400mhz which is just below its limit of 4 GB machines.

  so I thought everything would go smoothly, it is certainly not my first ram upgrade, having built many of the old desktop computers it was inflict through, I consider myself pretty well informed on the pc and have renovated a lot of pc, same Freelancer my skills of mechanics and tokens for a lil extra cash on the side I have dealt with many a problem, repair and upgrade, since I took my first windows machine in 2000, before that I started with a commodore 64 and eventually got an apple iic when I was about 10 years old... anyway, what im getting here, is I USED to know my s#@t, but for some reason any It's evading me and google isn't offering anything on the subject.

  We planned on him to update to sp3 after have modernized their equipment as much as we can, while at the same time educate him as much as I could about how the computer worked, how to open and how to treat the components inside, it was the first time, he had never looked inside his machine or any machine besides...

  However, because of delays and the issue with the ram does not, I eventually send him home with the same stock set up, he brought to me.

  Cut to the Chase

  The problem here is that for some reason when I install 1, 2 or 3 the cards of ram 1 GB the machine do not post and triggers a series of beeps system, so obviously something isn't jiving, and I can't put my finger on it.
  I can use 1,2,3 or all 4 of his stock [256 MB ddr 400 mhz] ram cards and it will display and start with change messages memory clear system, however, when you use less than four of its ram slots, a message is launched upward during post, stating something to the effect of all the slots must contain the same amount of ram

  We are working on PC is a:
  HP DC 7100 CMT
  Windows XP SP2

  current installed RAM is [256 MB ddr 400 mhz] x 4 = a total of 1 GB

  tried to upgrade RAM parts:
  Ballistix [1 GB ddr 400 mhz] x 2 = a 2 GB total

  more

  Memory Dell [1 gb ddr] (mhz are not)

  I thought it was probably a bios thing and was about to investigate, but we ran out of time, now I'm tender hand to this community in the hope that someone here can indicate what it is I'm obviosly dominant, I really want to get his machine is upgraded because it is expessing a lot of interest in Unity3D , and scripts, ANDS I'd like see hiw cultivate these skills and I can't buy a machine, and he cannot afford a new machine, so the upgrade of its rigging with these old quarters would be the most ideal situations for him, if we cannot find out we will simply create a new rig out of my 'old' , but the 3.0 ghz core dou in his dc 7100 cmt processor is probably better than any of the alternatives in my attic... so yes this is my dilemma and I hope that some here is kind enough to point me in the right direction

  Thank you and best regards,
  Chris

  Hello:

  You must have the total amount of memory in slots 1 and 3 are the same, and the same quantity in slots 2 and 4.

  The PC will not work if you put 1 GB in slot 1, 1 GB in slot 2 and 1 GB in the Groove 3 because you're short 1 GB in the empty slot 4 and just short of 1 GB in slot 4 = 5 beeps.

  Then... If you do not have 4 x 1 GB then use 1 GB in slots 1 and 3 and 256 MB in slots 2 and 4.

  See the table below on page 16 memory configuration.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287187

• Upgrade memory for Pavilion dv7

  In October, I bought a Pavilion dv7 (model dv7t-7000) with 16 GB of RAM.  Is it possible to upgrade to 32 GB?  I also want to add an SSD as a second drive.  Is this possible.

  Hello

  It's a CTO machine so we can have its specifications.

  1. for the RAM, I think 16 GB is its limit as shown in the following link:

  http://www.crucial.com/upgrade/HP-memory/Pavilion+dv7+series-models.html

  2. Yes, you can use SSDS on the second span, please watch the following video:

  http://www.YouTube.com/watch?v=5kZ4irwlyEY

  Kind regards.

• Can I upgrade the processor in DV7 - 3067CL.

  Can I upgrade the processor in DV7 - 3067CL a 2.40 GHz AMD Turion II Ultra Dual-Core Mobile Processor M600 to a 2.7 GHz AMD Turion II Ultra Dual-Core Mobile Processor M660?  And that supplys them. I looked on Newegg and Tigerdirect. Please help me. I would like a laptop fast for games with spending them much money on upgrades.

  You mess with the best die like the rest. Honest to my grave my soul lives for the Lord, and my sword finds its place in the evil that I send to hell. IM part of the clan army Stoon.

  The M640 @2.6 ghz is officially supported the fastest processor. Here is the Manual:

  Manual

  M640 on ebay

  The processor is about $ 100 on eBay. However, I wouldn't do this upgrade if your goal is to improve the power of the laptop game. You would not notice a significant improvement. .2 ghz is an increase of 9% which is not significant at the risk of tearing the machine. Also, the power of game is not so much based on a lot more information about the processor, the graphics card and who can not be upgraded. Laptops can usually be modded in game machines when they come that way from the factory.