Upgrade to a HP P6310f

I want to upgrade my p6310f hp with a new PSU, gpu and cpu cooler for overclocking (the CPU is an AMD Athlon II x 4 630 and I heard tha is a good Overclocker). Here are the pieces...

1 600 watts of PSU-Corsair Builder series

2 GPU - Sapphire Radeon 7850

3 CPU cooler - Cooler Master Hyper 212 EVO

I was wondering if the video card and the CPU cooler both held on the same motherboard since it is a matx.  I was also worried that the gpu and the cpu cooler does not in this case.  In addition, I was worried about overheating in the case and if he trained my system crash.  If necessary, I am ready to buy a new case that would be the HAF 912.   Thanks for your help.

Here are the specifications of your HP Pavilion p6310f desktop. You are right that the CPU is an AMD Athlon II x 4 630 and you may have heard it's a good overclock but the BIOS on these systems are locked and have absolutely no options to tweak the parameters of your system, including overclocking it.

1. Corsair CX600 is a highly recommended PSU and is known to fit in many cases of HP.

2 to 8.27 inches long, GPU Sapphire Radeon 7850 should fit without a problem. It will take two slots.

3 cooler Master Hyper 212 EVO CPU cooler... jump, a waste of money that the system is not overclockable.

Tags: HP Desktops

Similar Questions

  • try to update the card graphics and power

    Hello. I'm trying to upgrade my hp pavilion p6310f and supply is low for most video cards and I would like to know how I can get that will fit the motherboard, I forgot how different motherboards are the other and ended up buying a diet that would not work with my pc. So just trying to get some info on what might work and others. Also upgraded the video card of the 9100 that comes with it a GForce 210 because it had only 300w to run, but wish to go higher for a 550.

    Hello
    Welcome to the HP Forum!

    Kerzin wrote:

    Hello. I'm trying to upgrade my hp pavilion p6310f and supply is low for most video cards and I would like to know how I can get that will fit the motherboard, I forgot how different motherboards are the other and ended up buying a diet that would not work with my pc. So just trying to get some info on what might work and others. Also upgraded the video card of the 9100 that comes with it a GForce 210 because it had only 300w to run, but wish to go higher for a 550.

    The motherboard of your PC has a standard connector for ATX 24-pin and an ATX connector four.  A Corsair 550 (series of manufacturers) must be exactly what need you. It will have all the capabilities of power required and connectors for your mother and peripheral card. ATX 12V v2.3 specification is the latest standard.

    Kind regards
    Eric

  • looking to upgrade the psu, case and add front pannel 5.25 fans.

    I own a hp pavilion p6310f. and I'm looking to upgrade my power supply to hande the power of extra fans and an improved processor, cooling system, I need also a case that correspond to the only with other ports so my fan mounted above pci p6310f is left above the pci so I can use this location. and finally, I need to be able to add startech fans at the front. I don't need a fancy case just something larger but similar research for my style of case default hp p6310f

    EDTII

    Hello

    Look over this case Rosewill Challenger. It is not very expensive and it allows you to mount the input of the power supply down to the option (on a hard surface is recommended as a carpet could cause problems of air flow).  Don't forget to take into account the width of the case when buying a system of cooling heat sinks cool air are high enough.  This case has a lot of large cooling fans.

    The existing media player could be a problem (finish and made search).

    I have one using the Rosewill future for one of my PC, but I see that it is out of stock Newegg.

  • upgradeing ram important issue and other questions

    I have a p6310f of hp with stock mobo and ram 6 GB with a testing latancy or 7-7-7-20 if I upgrade the RAM to 16 gig with say 11-11-1127 latency going to work? also I and looking to change my case to something big to contain all my parts which would be most effective, I need that would be gamming cooling fans high quality events ect and built in the management of the psu cables and also lighting case on board. and I intend upgradeding my diet for a modular what power should I get because I want a power upgrade, but do not want a lot Finally I plan to upgrade my cpu which is the best that I can get that to work on a stock hp p6310f mobo and I also chip new plan what could get for said of cooling water id perfer a all-in-one, when I'm very new to the cooling water. manythanks to a guy who has had great love for hp and got a support from you wonderful people!

    EDTII

    Here are the specifications of your HP Pavilion p6310f desktop and it is card mother M2N78-(Violet6). According to specifications, your computer will support the following improvements;

    CPU / processor;

    Max TDP = 95 Watts

    This motherboard only supports AM3 processors.

    Supported memory is limited to DDR3 modules only.

    HyperTransport 3.0

    AMD Phenom II X 4 9xx/9xxe/8xx Quad-Core (Deneb)

    DIMM / memory;

    Four DDR3 DIMM sockets (240 pin)

    DIMM types supported: PC3-8500 (DDR3-1066) PC3-10600 (DDR3-1333) or

    Non - ECC, unbuffered single memory

    Supports 1 GB, 2 GB and 4 GB DDR3 DIMMS

    Dual channel memory architecture

    Power supply;

    All ATX12V v2.3 power supply about the same size as your original factory supply. The rated power is really depends on the requirements of the graphic card installed on the computer. In general, the Corsair CX500, or CX600 are highly recommended and known to fit most HP consumer. It seems that Corsair has recently expanded the range of CX to include some modular power supplies.

    Graphics card;

    Almost any PCIe x 16 v2.0, v2.1 and v3.0 should work on your computer. The games current and/or futures contracts, you intend to play will determine what graphics card, you must install. As you like it is a "gaming platform", I would use a Nvidia GTX 550 Ti, GTX 650 Ti, or more... or an AMD Radeon HD 6770, AMD Radeon 7770 or higher.

    If you really want to use a new case not HP and the water cooling, I wouldn't bother upgrading your HP p6310f. Instead, I'd build a new system of measurement from the ground upward. This will allow you to use the latest available technology.

    Please send Bravo

  • Upgrade Windows 7 Home Edition to Ultimate

    I use a HP desktop computer, model p6310f, who is about 2 years old and comes with Windows 7 Home Premium installed.  He also seems to be the 64-bit version (which is indicated in the computer system "Properties" section.

    I plan to upgrade to Windows Ultimate.

    Is it possible to switch to the x 86 version (32-bit), or do I have to upgrade to x 64?

    More important still, can anyone recommend which is a better choice?

    I also intend to improve all my MS software, and the same question applies to the Agency and other packages?  Any recommendations on whether to go with versions 32 or 64 bits?

    Appreciate any comment there...

    Thank you

    You must install the 64-bit version.

    Your computer comes with 6 GB of RAM that need this version of Windows in order to be fully utilized.

  • ERROR: No supported CPU installed, HP P6310F

    HP p6310F

    Windows 7 Home Edition

    ERROR: No supported CPU installed

    CPU replacement

    Hello!  I replace the CPU in my HP P6310F.  According to this literature, http://support.hp.com/us-en/document/c01949155 , I have an AMD Phenom II X 4 Quad-Core 9xx/9xxe/8xx (Deneb).  My understanding has always been that "9xx" means any phenom II in the class of the 900 series.

    I bought a retail Phenom II X 4 965 Black Edition, part HDZ965FBGMBOX number, installed and get the error message: CPU support is not installed message.  After searching and reading about the error message and other messages, it seems it might be due to the 'black edition' and/or because it is 125 watts.  It was the answer to a few others in the same situation as me.

    Can you please tell me why this CPU is not compatible and please help me with a list of compatible CPU?

    This is also in the 9xx series, but is it at 125W

    HDZ955FBK4DGM AMD Phenom II X processor 4 955 - Quad Core, 6 MB of Cache L3, 2 MB L2 Cache, 3.20 GHz, Socket AM3, 125W, fanless, OEM

    This lies in the 9xx series and is 95W

    AMD HDX945WFGIBOX Phenom II X 4 945 Quad Core Processor - 3.00 GHz, 6 MB of Cache, bus front to 2000 MHz (4000 MT/s), retail, Socket AM3, processor with fan

    The stock processor is an AMD Athlon II X 4 630, 95W

    I can provide any other information you may need, thank you very much!

    There is no AMD Black Edition CPU that are compatible with any PC HP desktop.

    That's what the problem is related to. Black Edition CPU are special processors who have discovered the multipliers for amateur quality motherboards. You could not access the multipliers to overclock the CPU with the motherboard you have installed it anyway.

    Even if you choose, buy and install one of the microprocessors in maintenance & service Guide there is no guarantee HP which will be exploited.

    You should also be aware that installing a different CPU than your office has been delivered with the warranty.

    Sorry to bear bad news.

    The good news is that the processors listed in the maintenance department & guide reputable reports of upgrade in discussions in the forum, to run.

    Best regards
    ERICO

  • p6310f video card update

    You want to upgrade my GPU and maybe p6310f PSU to play Warcraft MoP.

    Watch->

     01 G-P3-2621-KR from EVGA GeForce GT 620 1 GB memory DDR3 64 - bit PCI Express 2.0 x 16 HDCP Ready video card maybe the GT 630?

     

    Mayber the Corsair PSU CX600W?

     

    Thank you, Sly.

    Alpela, welcome to the forum.

    I have reviewed the requirements for WoW, MoP, and it seems that the video card and PSU should do what you want.  I suggest to measure the PSU existing and comparing measures to whichever you choose.  I think it should fit without any problem, however.

    If your problem is solved, please click "accept as a Solution.

  • No service after upgrade the server to 5.2 on El Capitan

    I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

    I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

    I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

    Some additional info:

    I can connect to the server through ftp and other services; just no web service.

    Port tests show that port 80 is not blocked

    Using the IP address I can get to the window of the home server.

    Accessibility means no services available

    Websites is on and I can't find anything that is not defined in law or is different than before the update.

  • I've never done a Time Machine backup and I have upgraded to iOS Sierra. Help!

    I'm a fool. After owning my Macbook for 5 years, I failed to make a single Time Machine backup. I just saved my essential to an external hard drive. I have upgraded to iOS Sierra. Big mistake. I want to go back to iOS Capitan, but it does not seem possible. Now, my external hard drive is wiped clean (things are dark). What are my options? If I'm stuck with Sierra?

    If you have downloaded El Capitan, it should always be available in your purchases. Now, you will need to make a backup to backup your personal files.

  • Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

    After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

    I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

    But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

    Thanks in advance

    Hello StasV,

    Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

    Audio routing call - the iPhone user Guide
    Help to connect your iPhone, iPad or iPod touch with your car radio

    See you soon!

  • Yahoo Mail failure after upgrade of Sierra - iMac

    After the upgrade to Sierra... Now I find that I can't 'see' Yahoo mail... I tried to add the a/c: then the removal of the a/c. I get the Triangle of Hazzard indicating error account! I went down this loop for 2 days...

    All my other email accounts worked instantly. iCloud: Gmail etc.

    I tried to manually configure the settings...

    Everything seems 'normal'... but not a thing, no mail: no record... a real pain. the only joy that is web based too... If I can work...

    But, come on APPLE... This happens to my Yahoo mail whenever I update IOS... What is going on???

    I always seem to end up in a CHAT SESSION just to get my MAIL BASIC... This ISN'T a quality SERVICE...

    MAIL today, is a very basic service... Please, APPLE... issue a patch for us, the little guys

    Rant on.

    help, please, anyone...

    One user posted (Re: Sierra - Yahoo mail offline persistently) he has had success in choosing don't no Yahoo when you set up the account, but to choose the other and set up the details manually. You would like to try and see if it works for you.

  • is more able to stream video from some sites after the upgrade to Safari 10

    After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

    Open Safari preferences / Security tab and check the box allow Plug-ins.

    Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

  • What is the text on the lock below screen date, after upgrade to IOS 10?

    Hello

    I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

    What is - this and how can I remove it?

    Hello

    Try a reboot press and hold the power button / stop and menu button hold both down until you see

    Apple logo.

    It may take 30 seconds.

    See you soon

    Brian

  • Stock app not news open stock since the ios10 upgrade

    tried to delete and reinstall. any ideas how to fix? Thank you!

    Hi AK@Ltd,

    Thanks for the upgrade to iOS 10! I understand that when you launch the app Stocks there are no headlines loading. Great way to try to resolve in uninstalling and then downloading it again from the App store. If this did not fix the app, you can try to make sure you have a good and stable internet connection. Also, check that your date and time settings are set to "auto detect".

    Get help with the date and time on your iPhone, iPad and iPod touch

    Restart the iPhone can do the trick as well. Restart your iPad, iPhone or iPod touch

    Please use the Apple Support communities to post your question. These measures should have your app Stocks giving you your new stocks as expected. Good day.

  • Time Machine does not work after upgrade to Sierra

    The Time Machine (TM) fail to start backup and there is still "preparing backup...". "for more than an hour. This right after upgrading to Mac OS Sierra.

    Another weird thing happens to the toolbar of the Mac Mail. The Junk button is replaced by another button. trying to put back in place, but remove the button become a button.

    Please help with the backup problem mentioned above. Thank you much in advance.

    How long have you waited? After a new installation, it must be a fair while even with a SSD to prepare the first backup due to the number of modified files.

    Make sure the TM drive is in the list of items excluded from Spotlight indexing. ICloud newsletter and other cloud services.

Maybe you are looking for

  • My DSC Certificae signature is not displayed under the link "Your Cerificate" and only encryption is indicated.

    I have a USB DSC(digital signature certificate) token, with the two 'encryption' & 'Signature' certificates downloaded into it.Two certificates are visible in the middleware of my USB Token. As you watch the certificate under 'Advanced-> view certifi

  • Increase the RAM memory

    Hi all... I use hp envy 4 1201tx ultrabook. I plan to upgrade my RAM memory. I have 4 gigs of RAM with maximum possible memory to 16 gigs. Can I contact HP for the upgrade. Still on warranty.

  • Need a version to be approved as soon as possible

    Yesterday, a domain name of our hosting server glitch was causing our BlackBerry app can't access synchronization servers, and thousands of users can access their data in the cloud. We have released an update to fix this problem, and we need the upda

  • Error in ajax on request process?

    Hi allNow, I did AJAX tow on request1-name: Get_item_balance Declare   p_itemid  number ;   p_balance  number ;   Begin       p_itemid  := apex_application.g_x04;       select NET into p_balance         from V_ITEMS_BAL       where ID = p_itemid;   -

  • Audio waveform is * not * show in nest

    I'm working on a project of three cameras multicam in first CC 9.2.0.  I synced everything up in a sequence of source multi cameras and all six audio tracks show waveforms.  When I drag this sequence to the "new item" icon to make a nested sequence m