Upgrade to IIS Local Update Server 7.5

Similar Questions

• An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  An error has occurred has not got a response from the software update server (update.local). What should I do to update my laptop?

  It is one of the many problems that occur on my mac.

  Update of OS X El Capitan 10.11.4?

  1. backup Mac.

  2. install 10.11.4 combo update.

  https://support.Apple.com/kb/DL1869?viewlocale=en_US & local = en_US

• IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  IIS on Windows Server 2012 R2 8.5 sends error 401.2 when change password Administrator windows local, 500 errors

  This particular configuration is with Coldfusion 11. There is no errors in newspapers and the w3 service still works as are application pools. All websites and app pools run with transmission of authentication request.

  ColdFusion does not work with windows authentication and may be enforced as if reconfigured integrated instance to do this, if this isn't a matter of colfusion.

  Here is what I tried:

  1 I created a new user account with admin rights and disconnected and logged in as them and then make changes to the password on the server, and that didn't make a difference.
  2. I checked that all Web sites using the request pass through authentication.
  3. I checked that the application pool is also using the application-pass-through authentication.
  4. I looked to find errors in which case newspapers but don't see anything there either
  5. I also searched a failure in coldfusion logs and saw no more relevant here either, but I got colfusion running without IIS in any case.
  6. search of the roots of web for coded passwords hard and found nothing.

  If you have any ideas or any ideas let me know.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• AUSST - update server problem: 406 IIS7 errors and ERROR: Invalid webfeed

  I spent today, configure, and install an instance of the software AUSST2.0, according to http://www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Up dateServerSetupTool_TechNote.pdf

  Here is where I am:

  Via Firefox/IE, I get the following when you browse the Updaterfeed.xml:

  XML Parsing Error: syntax error

  Geographical area: < SITE SERVER >

  Number of row 1, column 1:

  0001

  ^

  Which I think is ok... the server sends the updaterfeed.xml. I can also download updates directly via IE or Firefox.  The corresponding entry in the IIS log is:

  /AdobeUpdate/webfeed/OOBE/aam20/win/updaterfeed.XML - 80 - < IP ADDRESS > Mozilla / 5.0 + (Windows + NT + 6.1; + WOW64; rv:9.0.1) + Gecko / 20100101 + Firefox / 9.0.1 304 0 0 196

  When I try to do an update via Photoshop, I get:

  "The update server is not responding.  The server may be offline temporarily, or the settings of firewall or internet is perhaps incorrect.  Please try again later.  "Error code: U41M1C213"

  Regardless of the status of firewall locally or on the server.  Further communication with the server is fine.

  the level 10 aamu.log says:

  2012 01-17 T 20: 01:52: slurpURL entry: (http://< SERVER IP > / AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml) bytesPushed

  2012 01-17 T 20: 01:52: main download loop - pending the availability of the network

  2012 01-17 T 20: 01:52: network connection

  2012 01-17 T 20: 01:52: connected to: = http://< SERVER IP > /AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml

  2012 01-17 T 20: 01:52: received the status of the server code

  2012 01-17 T 20: 01:52: slurpURL: (http://< SERVER IP > / AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml) bytesPushed = 0

  2012 01-17 T 20: 01:52: CFU (Webfeed): dumping webfeed: C:\Users\ < USER MY name > \AppData\Local\Adobe\AAMUpdater\1.0\Data\webfeed.xml

  2012 01-17 T 20: 01:52: CFU (Webfeed): ERROR: Invalid webfeed. Could not read webfeed sequence number.

  2012 01-17 T 20: 01:52: UCGetprogress: (B) turning with value = 1

  2012 01-17 T 20: 01:52: UCGetprogress: updates State for back reffId =

  2012 01-17 T 20: 01:52: UCGetprogress: updates return State = 41

  2012 01-17 T 20: 01:52: UCGetprogress: check the updates of returning outError = 213

  2012 01-17 T 20: 01:52: UCGetprogress: check the updates percent return = 0

  2012 01-17 T 20: 01:52: UCGetprogress: updates to string of unique return error code = U41M1C213

  2012 01-17 T 20: 01:52: UCGetprogress: (D) poll with value = 1

  2012 01-17 T 20: 01:52: entered < < UCGetUserPreferences > > call.

  2012 01-17 T 20: 01:52: < < UCGetUserPreferences > > call back with the return value - = 1

  The following IIS log entry for this is:

  GET /AdobeUpdate/webfeed/oobe/aam20/win/updaterfeed.xml - 80 - < IP ADDRESS > AAM + Updater + 1.0 406 0 0 19

  I added the < add name = "SSINC-xml' path ="*.xml"verb =" "*" modules = "ServerSideIncludeModule" resourceType = 'No' > to my web.config, by http://blogs.adobe.com/oobe/2010/09/enterprise-in-house-update-hosting-pour-cs5.html "

  I keep getting the error U41M1C213 while updating.  I can get updates when I remove the AdobeUpdater.Overrides of C:\ProgramData\Adobe\AAMUpdater\1.0 (Win7)

  Help?

  * by evasive: http://forums.adobe.com/thread/951039 -> http://forums.adobe.com/thread/951039 -> here.

  Hi MUIT2012

  I also I got exactly the same problem, but I thought I'd follow upward with my real fix, as looking for "U41M1C213" through google gave this position, as well as your other constantly.

  After digging through responses to blog on this thread > http://blogs.adobe.com/oobe/2010/09/enterprise-in-house-update-hosting-for-cs5.html< i="" did="" find="" the="" answer="" from="" both="" christopher="" kinard="" and="" travis="" henry="" which="" ultimately="" fixed="" this="">

  I'll walk through the general setup

  • I followed this guide for the initial synchronization of AUSST2.0 + IIS7 configuration of a site: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/Ad obeApplicationManagerEnterpriseEditionDeploymentGuide_v2_1.pdf
  • Then according to the advice of people I have credited above, suppliment what the above deployment guide said and add SSI for all types of file you put into managers of IsapiModule (zip, xml, crl, dmg and GIS). I added the via the UI Manager to IIS, rather than manually typing in the web.config file. See screenshot of the final outcome of all additional mappings and an example entry below:
    
    

  Hope this helps anyone who might be struggling with this, because it does not seem to be very well documented.

• Update does not connect to update server, not able to download new version of Firefox.

  Every time when I am asked to upgrade to a new version of Firefox, the updater refuses to connect to the update server. When downloading it manually, I get a message that says "unknown disk image. What should do? As this is a security update, it would be nice to have downloaded...

  If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

  Download a new copy of the Firefox program and save the file on the desktop disk image (dmg)

  • Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Trash the present application Firefox to do a clean (re-) install
  • Install the new version you downloaded

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• The Apple software update server could not be found. Check your Internet settings and try again.

  Today, I ran Apple Software Update, which offers a v2.1.4 update and installed. Then, she offered a v2.2 update, which I also installed. Check new updates, I received this error message: 'the Apple software update server is not found. Check your Internet settings and try again. »

  My laptop computer that runs Microsoft Windows 7 Home Premium 64-bit.

  I read the other threads on this problem and tried Windows updates and restarting my PC. I had iTunes installed, but uninstalled it months ago. If I had installed iTunes, I would try the method here: Remove and reinstall iTunes and the components of the software for Windows 7 and later versions - Apple Support .

  I don't want Windows 10 and goes through other threads, upgrade to would not necessarily solve this problem.

  Having received no response, I uninstalled all Apple software and then installed QuickTime, which I use occasionally. The Apple software update is back to version 2.1.3.

• Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.

  I received an email indicating that HP does not show me as having all printers which explains why I have not received information of driver update I guess.  But when I typed in HP4500 G510, I received the following error message:

  Unable to connect to the local MySQL server through socket ' / var/lib/mysql/mysql.sock' #2 #.

  And since I don't know beans about computers, I don't have any idea what it means.

  Because I had to pick a topic, I chose the one above, but no other choices were nowhere near cover.

  Hi mac64.
  I understand you are trying to register for updates for your Officejet 4500. I can certainly help you with this.

  I'll give you a link to try to register for driver updates. Please let me know if it's the same link you used and if this works differently for you, simply click on the following link: the HP driver updates.

  Hope to hear from you soon

• Windows Update feature connects to the Windows Update server after the transition from XP to Windows 7 Pro.

  Updated XP PC to Windows 7 Pro 64 bit.  First upgrade failed due to the bad version of Win 7.  (Distorted version of seller).  Correct version relocation has left two versions installed so I started reinstalling the correct version and reformat selected before continuing.  (21/04/16)  Installation proceeds correctly, validated and activated license, but the update function didn't work.  One version on the disc after the previous action.  Then I downloaded and installed IE 11 manually the version 11.0.9600 of Microsoft (same date) and then downloaded and installed MSE from Microsoft 4.9.218.0 version (same date).   MSE updates have not downloaded initially until I ran Win update problems solving.

  I have since run program sfc/scannow (without problems of integrity or repaired files), update Windows utility for troubleshooting and Fixit programs.  I also stopped the update service, delete the appropriate configuration of software and restarted the service records.  Still not connection with update server.

  Download and install the following update manually. This greatly speeds up the update of Windows on new installations of Windows 7.

  Installation and research updates is slow and high utilization of the processor occurs in Windows 7 and Windows Server 2008 R2
  https://support.Microsoft.com/en-us/KB/3102810

• My system will not download upgrades and assistant says update error 0x8024402c

  * Original title: win 7 64-bit ultimate on asus kgpe map server dual socket

  my system will not download upgrades and assistant says update error 0x8024402c (2016-03-29-T-10_53_07a)... whats up?

  Turns out that my computer has a virus, of which a part had apparently obtained in the area of the 100 MB of my raid0 array system.  When I reloaded the os I've removed then reinstalled the partitions, then reloaded the software and my problem calmed.  Thanks for your ideas.

• the IPS update server IP

  Hello

  If I want to configure IP addresses for automatic updates, it asked for the ip address of the update server, what is this ip address? This automatic update configuration it takes to update the signature, or is it for other updates?

  concerning

  You cannot point to the Cisco site, you need host your own internal server for this purpose. Personally, I do not use or recommend to upgrades of version in this directory (I think he'll try to apply, if you do). We use the CLI interface for installation of version upgrades. We use the automatic update to install signature updates.

• Update Server

  Hello

  We could upgrade our machines (iMac and Windows) by using the Adobe update server, but we were able to find a newspaper from which products are updated. Is there a log on the server that keeps track of which machines are updated and which products are updated? Thanks in advance!

  Installation and launch log errors | Adobe Creative Suite 6, Adobe Creative Suite 5.5, Adobe Creative Suite 5

• Installation internal update server update failure

  Hello

  I'm trying to set up a server for internal update in accordance with the instructions provided in the Guide of Administration of Flash Player , but I'm having some trouble.

  Here's the FlashInstall.log:

  2015-2-4 + 19-12 - 14.562 [info] 1628 my.local.server

  2015-2-4 + 19-12-[info] my.local.server 1629 14.612

  2015-2-4 + 19-12 - 14.615 [info] 1614

  2015-2-4 + 19-12 - 14.617 [info] 1615

  2015-2-4 + 19-12 - 14.619 [info] 1618

  2015-2-4 + 19-12 - 14.621 1619 1063 [info]

  2015-2-4 + 19-12 - 14.650 [info] 1628 my.local.server

  2015 2-4 + 19-12-14, 653 [info] 1629 my.local.server

  2015-2-4 + 19-12-[info] 1614 14.656

  2015-2-4 + 19-12 - 14.659 [info] 1615

  2015-2-4 + 19-12 - 14.660 [info] 1618

  2015-2-4 + 19-12 - 14.663 [info] 1604

  2015-2-4 + 19-12 - 14.663 [info] 1608

  2015-2-4 + 19-12-[info] /pub/flashplayer/update/current/sau/currentmajor.xml 1631 14.678

  2015-2-4 + 19-12 - 14,813 1630 /pub/flashplayer/update/current/sau/16/xml/version.xml [info]

  2015-2-4 + 19-12-[info] 1632 14.816

  2015-2-4 + 19-12-[info] 1632 14.816

  2015-2-4 + 19-12 - 14.816 1630 /pub/flashplayer/update/current/sau/16/xml/patch.xml [info]

  2015-2-4 + 19-12 - 14.818 [warning] 1445

  2015-2-4 + 19-12 - 14.818 [info] 1632

  2015-2-4 + 19-12 - 14.819 [info] 1630 /pub/flashplayer/update/current/sau/16/xml/patch.xml

  2015-2-4 + 19-12 - 14.820 [warning] 1445

  2015-2-4 + 19-12 - 14.821 [info] 1632

  2015-2-4 + 19-12 - 14.822 [info] 1600

  2015-2-4 + 19-12 - 14.829 [error] 1217-2146881269

  2015-2-4 + 19-12 - 14.831 183 1234 [error]

  2015-2-4 + 19-12 - 14.833 [info] 1612

  2015-2-4 + 19-12 - 14.836 [info] 1620

  Here's the update server directory tree:

  \---pub

  \---flashplayer

  \---Update

  \---Current

  \---Sau

  |   currentmajor. XML

  |   fp_background_update.log

  |   fp_background_update.bat

  |   fp_background_update.cab

  |

  + - 11

  |   + - install

  |   |       install_all_mac_pl_sgn.z

  |   |       install_all_win_ax_sgn.z

  |   |       install_all_win_pl_sgn.z

  |   |

  |   \---XML

  |           version. XML

  |

  + - 15

  |   + - install

  |   |       install_all_mac_pl_sgn.z

  |   |       install_all_win_ax_sgn.z

  |   |       install_all_win_pl_sgn.z

  |   |

  |   \---XML

  |           version. XML

  |

  \---16

  + - install

  |       install_all_mac_pl_sgn.z

  |       install_all_win_ax_sgn.z

  |       install_all_win_pl_sgn.z

  |

  \---XML

  version. XML

  Here's the customer mms.cfg:

  AutoUpdateDisable = 0

  SilentAutoUpdateEnable = 1

  SilentAutoUpdateServerDomain =my.local.server

  SilentAutoUpdateVerboseLogging = 1

  I checked the computer does trust the SSL certificate and I can navigate successfully on the update site:

  

  I checked the cab file downloaded Adobe by the server against a cab file I downloaded manually with my browser. Here is the output of md5sum of each file:

  73fc6ba78ab9660f63b1724f72e07a52 Server - fp_background_update.cab

  73fc6ba78ab9660f63b1724f72e07a52 browser - fp_background_update.cab

  This could be the cause of the failure of the update process? What else can I do to get this working? Am I missing something?

  Thanks for your help.

  Hi William,.

  Unfortunately, I'm not able to reproduce the error you observe, but continue to review.  Thanks to a network sniffing utility (such as Wireshark or similar), you can check to see if the Setup file is actually downloaded from the internal server to the machine?

  On Mac, the file is FlashPlayerInstallManager.log located in ~/Library/Logs.  Journal of sessions have begin with - start - log and ends with - end journal.  Some elements also connect to the private/var/log/install.log file, but there is no easy way to detect the beginning and end of a session of newspapers in this file.  To only capture logs for a given test session, I find the two files in the Console application and place a marker in the file before I start testing. This ensures that I have capture all logs for a given installation and do not miss anything.

  --

  Maria

• Cannot be updated for the new VMWare Fusion - connection to the update server

  Hello

  My apologies if I seem ignorant and things must be explained clearly to me, but I am a Mac user on a Macbook Pro for the first time. Have installed Vmware Fusion, and am also running Windows XP. Whenever I have try and upgrade to the latest version of VMware fusion, I get an error saying "connection to the update server has been lost. How to fix this problem please? Subsequently I can't write any DVD on my Mac. Very frustrating.

  Please could someone help and advise what I can do?

  Thanking you!

  Fatima

  Suggest that you download the full version of VMware Fusion and then uninstall/reinstall it from the .dmg image file that you download.

• Others become the iTunes update server message connection failed?

  Others become the iTunes update server message connection failed?

  My iPad has the logo of iTunes with the load icon and cannot update or restore on computer at home.

  All internet connections are very good.

  I'm having the same problem I tried 3 cables of computers 4 and my ipad won't restore or update.

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.