Upgrade to RV180?

Similar Questions

• First three steps Questions with RV180

  I recently bought the router RV180. I have a few quick "getting started" questions about its use:

  1. is the "static DHCP" screen I need to use in order to reserve addresses DHCP (see attachment)? That's where I was reserving all my DHCP addresses with. I'm just that I have the correct screen.

  2. what I have to do something for my setup of "backup", or my settings will always be around every restart of the RV180?

  3. I have to run a check on the RV180 firmware update and how can I update the firmware on the RV180 (as well as the SG200-18), or it usually comes with the latest out-of-the-box firmware? If I get ahead and put a contract on the RV180 and the SG200-18 service, will I automatically receive my updates? Are numbers of reference for service contracts the same for the RV180 and the SG200-18?

  Thank you!

  Hello

  1. is the "static DHCP" screen I need to use in order to reserve addresses DHCP (see attachment)? That's where I was reserving all my DHCP addresses with. I'm just that I have the correct screen.

  Yes, this is the right place to set DHCP reservations.

  2. what I have to do something for my setup of "backup", or my settings will always be around every restart of the RV180?

  Whenever you click on save after completing a change you configuration is saved and will survive a reboot.

  If you want to save the backup copy of your file from your Setup simply go in Administration > backup/restore settings.

  3. I have to run a check on the RV180 firmware update and how can I update the firmware on the RV180 (as well as the SG200-18), or it usually comes with the latest out-of-the-box firmware? If I get ahead and put a contract on the RV180 and the SG200-18 service, will I automatically receive my updates? Are numbers of reference for service contracts the same for the RV180 and the SG200-18?

  You must manually update the firmware of the RV180.  This firmware is available here:

  Firmware RV180

  It is simply a file, you download under Administration > Firmware Upgrade.  There is no bootcode for routers (as if he was with the switch)

  You can find this in the future in the same way you SG200 firmware (because this link may change) on Cisco's Web site.

  Regarding the service contract, the part number for two of these machines will be CON-SBS-SVC2.

  Hope that helps and I will try to get to your other questions sometimes today as well.  Also since you have purchased you are of course welcome to call and get support by phone, your two devices come with 1 year of technical support, and it looks like you have found or contracts, so I guess that make only 3 years.

  Cisco Small Business Support Center phone numbers

  Thanks again for choosing Cisco,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• RV180

  Hi people,

  I'm looking to upgrade one of my router (Linksys) residential customers to the RV180. The company is a coffee shop that offers free WiFi to its customers. I have the network configured and wired, so there's a (192.168.1.xxx) private network and a public network WiFi (192.168.2.xxx).

  The MAIN router is xxx 2 and is connected to a DSL modem. DHCP is active. I have access to the network remotely via the router of xxx 2. and he port transmits to the Router 1. XXX via the WAN IP if 2,222 on the private router, what port then passes to a desktop on the network of xxx 1... The private network uses the static IP address for the desktop and POS workstations. The xxx Router WAN gateway 1 is the IP address if the router of xxx 2. Confused yet?

  I have two cable access points to the router of xxx 2. No dedicated PC on the public network. Some customers.

  I have 2 desktop computers and several cable stations to 1 POS. xxx Router (DHCP is disabled).

  So, I hope I can finish with 2 routers and just use and manage one using the RV180. I need to maintain security on the private network (protection against users of wifi), keep the ability to manage remotely.

  That in a few words. The RV180 will meet my needs? Can I set up (based on reading how I could configure now things)? Any necessary additional information, just ask. Thank you

  Sent by Cisco Support technique iPad App

  Hey Terp, I think the answer is Yes.

  RV180 (w) supports a total of 5 VLANS (1 by default and the ability to create 4 others).

  Looks like it's the steps for your configuration.

  • Install the router and change the address default IP of 192.168.1.1 to 192.168.2.1
  • Create a VLAN 2, making 2 VLAN 192.168.1.1 subnet
  • Disable intervlan routing option to create a VLAN
  • Associate a port to VLAN 2 only then connect your desired for the Public WIFI AP

  Some points to consider when configuring the VLAN, intervlan routing is enabled by default, if you want to keep separate public WIFI, turn this off. You can also disable the "router management" for public WIFI VLAN. The router feature set includes management remotely over the Wan, and you can enable, disable, or change the DHCP protocol for each VIRTUAL LAN as desired. If you configure a Router 2 port VLAN not identified, connecting access point should be on the same network as the VLAN 2, exactly like any point of access for VLAN 1.

  If your access points are capable of VLANS, you can configure a port on Router 1 UNTAG, tag 2 and specify the VLAN ID correctly on your AP and it can both networks of service and always remain separate.

  Please let me know if that answers your request in a satisfactory manner.

  -Tom

• RV180 and DNS Made Easy?

  I am currently using DynDNS for my dynamic DNS provider with the RVS4000, but I'm looking to upgrade to the RV180 and to move my DNS provider dynamic DNS Made Easy since I can achieve all my DNS hosting under one roof. It supports the RV180 DNS Made Easy's dynamic DNS client? If this is not the case, can it be added in an update of the firmware? More information on DNS Made Easy's DNS dynamic can be found here:

  http://www.dnsmadeeasy.com/services/dynamic-DNS/

  Thank you!

  Nathan,

  the RV180 does not run on IOS is a GUI based platform. About the dynamic addressing wan, router only supports DynDNS, TZO and 3322 accounts. I hope this helps.

  Blake Wright

  HWC Cisco network engineer

• No service after upgrade the server to 5.2 on El Capitan

  I have a web server that was doing very well until I left the 5.2 update suggested to install OS X Server. I can't get to broadcast web pages. Screen sharing works always and nothing has changed on the routers, etc.

  I restarted the server after the update and restarted the server itself several times but keep getting connection via a browser failures.

  I did the upgrade even on other servers as well as the upgrade of Sierra. This server is running El Capitan, and is the only one that gave me problems. 5.2 server is not compatible with El Capitan?

  Some additional info:

  I can connect to the server through ftp and other services; just no web service.

  Port tests show that port 80 is not blocked

  Using the IP address I can get to the window of the home server.

  Accessibility means no services available

  Websites is on and I can't find anything that is not defined in law or is different than before the update.

• I've never done a Time Machine backup and I have upgraded to iOS Sierra. Help!

  I'm a fool. After owning my Macbook for 5 years, I failed to make a single Time Machine backup. I just saved my essential to an external hard drive. I have upgraded to iOS Sierra. Big mistake. I want to go back to iOS Capitan, but it does not seem possible. Now, my external hard drive is wiped clean (things are dark). What are my options? If I'm stuck with Sierra?

  If you have downloaded El Capitan, it should always be available in your purchases. Now, you will need to make a backup to backup your personal files.

• Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

  After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

  I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

  But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

  Thanks in advance

  Hello StasV,

  Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

  Audio routing call - the iPhone user Guide
  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon!

• Yahoo Mail failure after upgrade of Sierra - iMac

  After the upgrade to Sierra... Now I find that I can't 'see' Yahoo mail... I tried to add the a/c: then the removal of the a/c. I get the Triangle of Hazzard indicating error account! I went down this loop for 2 days...

  All my other email accounts worked instantly. iCloud: Gmail etc.

  I tried to manually configure the settings...

  Everything seems 'normal'... but not a thing, no mail: no record... a real pain. the only joy that is web based too... If I can work...

  But, come on APPLE... This happens to my Yahoo mail whenever I update IOS... What is going on???

  I always seem to end up in a CHAT SESSION just to get my MAIL BASIC... This ISN'T a quality SERVICE...

  MAIL today, is a very basic service... Please, APPLE... issue a patch for us, the little guys

  Rant on.

  help, please, anyone...

  One user posted (Re: Sierra - Yahoo mail offline persistently) he has had success in choosing don't no Yahoo when you set up the account, but to choose the other and set up the details manually. You would like to try and see if it works for you.

• is more able to stream video from some sites after the upgrade to Safari 10

  

  After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

  Open Safari preferences / Security tab and check the box allow Plug-ins.

  Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

• What is the text on the lock below screen date, after upgrade to IOS 10?

  Hello

  I have iphone, and after I upgraded to IOS 10, from dated on the lock screen (muh.5 1438 AH).

  What is - this and how can I remove it?

  Hello

  Try a reboot press and hold the power button / stop and menu button hold both down until you see

  Apple logo.

  It may take 30 seconds.

  See you soon

  Brian

• Stock app not news open stock since the ios10 upgrade

  tried to delete and reinstall. any ideas how to fix? Thank you!

  Hi AK@Ltd,

  Thanks for the upgrade to iOS 10! I understand that when you launch the app Stocks there are no headlines loading. Great way to try to resolve in uninstalling and then downloading it again from the App store. If this did not fix the app, you can try to make sure you have a good and stable internet connection. Also, check that your date and time settings are set to "auto detect".

  Get help with the date and time on your iPhone, iPad and iPod touch

  Restart the iPhone can do the trick as well. Restart your iPad, iPhone or iPod touch

  Please use the Apple Support communities to post your question. These measures should have your app Stocks giving you your new stocks as expected. Good day.

• Time Machine does not work after upgrade to Sierra

  The Time Machine (TM) fail to start backup and there is still "preparing backup...". "for more than an hour. This right after upgrading to Mac OS Sierra.

  Another weird thing happens to the toolbar of the Mac Mail. The Junk button is replaced by another button. trying to put back in place, but remove the button become a button.

  Please help with the backup problem mentioned above. Thank you much in advance.

  How long have you waited? After a new installation, it must be a fair while even with a SSD to prepare the first backup due to the number of modified files.

  Make sure the TM drive is in the list of items excluded from Spotlight indexing. ICloud newsletter and other cloud services.

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.

• iMovie crashes after Sierra upgraded.

  I have a MacBook Air and yesterday I upgraded the OS to Sierra. After that, iMovie crashes as soon as it load and continued to do so throughout the day. I can't access a video of work I had done and really need to send it to my client to download on their website. I repeatedly sent reports to Apple and restarted my laptop 3 times. I can't force leave them, because the program is still not open long enough to do something.

  I also tried to get a fix to remedy the situation, but there doesn't seem to be available.

  Does anyone have a solution to this? My laptop is less than 3 years.

  Hi nybor99,

  I understand that you updated your MacBook Air to macOS Sierra and now the iMove application is not responding.

  You did it to Time Machine backup your computer before updating?  You install iMovie version 10.1.2 after update to macOS Sierra?  Have you restarted your computer?  You try to access a project in iMovie or did you finish the project and export a video file (film)?

  Try these initial steps to solve your problem:

  1 launch the App Store on your Mac app, click updates, and then click the button next to iMovie update.

  2. restart your Macbook Air.

  3. open the Finder.  Open the Applications folder.

  4. right click on iMovie and choose read information.   Check the version 10.1.2.

  5 double-click on the iMovie application to open it.

  If the problem persists please reply to this thread with an update, including error messages that you may encounter and we will study further with you.

  Take care.

• Since the upgrade to Mac OS Sierra & screensavers

  I upgraded to macOs Sierra of El Capitan & my screen saver will come after the computer idle for some time.

  I have reset a twice, if I go to the screensaver, that's where.

  Thank you

  Hi there, Miriamnji!

  Thank you for joining the communities Support from Apple! It seems that you are having problems with your screen saver doesn't work does not correctly. I know how it is important to be sure that it works on your computer at any time. What you might want to try next some specific reboots. Read this article for trying safe mode if your Mac does not end commissioning. Although this article is about the computer does not start correctly, it can also perform repairs and stop startup items that can cause problems.

  Then, check out this article with steps how to reset controller (SMC) system on your Mac.

  Another option you can try is in this article: How to test a problem in another user on your Mac account. This will allow you to check to see if the problem is specific to the user or the system-wide.

  See you soon!