Upgrade to SP1 - sleepless PC

Similar Questions

• What is going on? Can't upgrade to SP1.

  I tried to upgrade an Acer laptop with sp1.  When it failed several times I reinstalled Vista.  The automatic update works now!  But when I tried to upgrade to SP1, it ran all along.  Then it corrupt the bootloader.  I was able to restore the repair disk system.  I still need to load the SP1 and SP2.  Notes; I have re-installed on the old system do not destroy system partition.

  B

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• My Windows Vista laptop does not start successfully after the upgrade to SP1

  I use Windows Vista Home Premium. I've updated my laptop with Vista service pack 1. After that my laptop will not start, it displays a message saying "Service Pack did not install. Restoration of the changes. Do not turn off computer. "after windows loading and then the computer restarts and the same thing repeats. I also didn't get a vista CD or a restore with my laptop CD. I tried a solution anywhere, but I couldn't find one. Please help me quickly because I do all my work laptop and I don't don't want lose my files.

  Perhaps you should review this KB

  Things to know before you download Windows Vista SP1
  http://TechNet.Microsoft.com/en-us/windowsvista/bb968859.aspx>

  Information about Windows Vista SP1
  What you need to know before you install Service Pack 1
  http://support.Microsoft.com/?kbid=936330>

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366>

  How to uninstall Windows Vista SP1 as a troubleshooting step
  http://support.Microsoft.com/kb/948537>

  Windows Vista Service Pack 1 is not available for installation from Windows Update and is not offered by automatic updates:
  http://support.Microsoft.com/?kbid=948343>

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  Go to your retail store, they should have the disk recovery for you or you need to go to your manufacturer directly because the manufacturer is best qualified to support the software that the manufacturer has installed on the hardware, provide your serial number and order the CD on their part. I bet they arrange an expedition to the France and tax treatment for it, but should not be too much.

  Note: The manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

• Need to update Vista Service Pack 1 to upgrade to Win7 newly purchased, but I can't upgrade to SP1, because he thinks that it is already installed. Catch-22?

  I just bought a Win7 update to finally get rid of my Vista.  I had automatic updates of Vista from day one and it is completely up to date after the update of Windows.  However, when I go to install the upgrade to Win7, it won't let me because it says I need Service Pack 1 installed on my Vista.  When I return to the WIndows update, it won't let me because he thinks that it is up-to-date.  What can I do?

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have two computers running vista and rebuilt recently starting them from original vista diskettes. I can't upgrade to SP1

  they have updated ok using automatic updates, but once they came to the service pack one they say that it has been installed ok, but when I check on the system sp1 isn't here. It seems that I'm still on the original version of Vista. I now want to go to SP2 because it is the only supported version now but can't because it says sp1 must be installed first.  How can I update?

  Hello

  -What is the exact error message / complete that you receive when trying to install the SP1 update?
  -You are aware of any changes made on the computer before this problem?
   
  If SP1 has been well installed and still does not appear in the information system we correct as registry below :
  (a) HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion CSDVersion
  Set it to 100
  (b) HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows CSDVersion
  Set it to 100
  (c) HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Control\Windows CSDVersion
  Set it to 100
  (d) restart the computer.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  How to back up and restore the registry in Windows XP

  For reference:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366
   
  Hope this information helps.

• Upgrade from SP1 to SP2 error Code 80070002

  I'm trying to update my computer from SP1 to SP2, I've done it before, but I had to reinstall windows. I have SP1 from now, but I don't have the SP2 update list. I went to the site and downloaded the SP2 but he continues to say that I have the SP1 and I have to remove SP1 and redownload it but when I put SP2 in it tells me the same thing over and over again. I am operating Windows Vista 2006 Dell Inspiron.

  Do the first three steps in the article:

  To stop

  To remove

  To restart

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

• upgrading to the windows xp family of sp1 to sp2

  After the upgrade from sp1 to sp2, the pc starts in the start window opening, and then just it recharges in a warm start. does not start in windows continues to reboot back to warm start.

  You need to start from the square.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a local network (i.e. other computers) and before using a USB or SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW TO get a computer that is running Windows XP Gold (no Service Pack) fully patched after a clean install
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer products removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  NOTE: do NOT connect the computer to the internet until you got installed SP3 and make sure that the Windows Firewall is enabled! Use another computer to download the removal tool is appropriate as well as installers for WinXP SP2 (Yes, you can ignore the SP1) and WinXP SP3.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• If I wipe hd and reinstall xp original disc having sp1 pro and upgrade to Service Pack 3 only also include sp2?

  Have windows xp pro with sp3, but can't and would like to reinstall the original windows disc but I need to know if I download Service Pack 3 not that also include the sp2?

  SP3 actually contains SP2 and, Yes, you can upgrade to SP1 SP3 directly. After the back if you need help because some people experience problems with this particular update (usually based on two factors: the brand of their PC and whether or no, some security programs are running in the background).

• How upgrad of xp home sp 1 update to sp3 with an xp with sp1 disk?

  He won't let me upgrad it saying a newer version is already installed help please, I just can't unstall the sev packs, I said to the girl, trying to help with a frsh install for xp family not be updated online until she moved the upgrad by disk xp and yet she did not she has put family xp updated to sp 3 and when I go to install the disc upgrad it says a recent worm is insalled already so I tried as much as I know to install this disk upgrad with sp1 on it can someone tell me what to do in addition to another new facility?

  Your question is very difficult to understand.  Next time, try to write in a complete sentence without using cryptic abbreviations (and spelling).

  I think that you are asking how to change Windows XP Edition service pack 3 for Windows XP Pro family, when all you have is a Windows XP Pro service pack 1 upgrade CD.

  If this is your question, the answer is that you need create an installation CD slipstreamed that integrates your sp1 XP Pro with Service Pack 3 CD.  There are several websites with instructions.  Use your favorite search engine to search for "slipstream sp3 XP.

  You can do this in a variety of ways, but using one of the two free programs - Autostreamer or nLite - makes it easier.  You will also need an application to create the CD from the ISO file that you create with Autostreamer or nLite.  ImgBurn is free and easy to use.

  http://Lifehacker.com/386526/slipstream-Service-Pack-3-into-your-Windows-XP-installation-CD
  http://www.winsupersite.com/article/product-review/slipstreaming-Windows-XP-with-Service-Pack-3-SP3
  http://www.ImgBurn.com/

• Satellite U205-s5057: Vista SP1 auto update?

  On my Satellite U205-S5057 with Vista, I have the "automatic updates" turned on.
  However he has never downloaded and upgraded to SP1.

  I understand that it should not so until some driver software has been updated because there have been problems with SP1 unles blocking all drivers are up to date.
  How can I find and I need to update the drivers?

  Thank you rly

  Hello

  > But it never downloaded and upgraded to SP1.
  Perhaps you have simply not noticed that SP1 is installed?

  You can check if SP1 is installed on your portable computer by following these steps:

  (1) access control panel
  (2) select the system

  Here, you should see your Vista version and a notice if a SP1 is already installed.
  If it was not installed, choose the option Windows updates. You should find it on the left.

  On the other hand, you could install SP1 manually. First you must download SP1 from the Microsoft page. After the download is complete, you can perform the update.

  This might take a few minutes, but be patience. It is s ;)

  Concerning

• Z400 disks with EFI partition not mounting after the Windows 7 Pro upgrade

  HP z400: after a repair/upgrade to sp1 of Windows 7 Pro (64), no matter what external disk with an EFI partition is not installed.  Player will be present in the BIOS and the management of drive, but without a letter. Cannot assign a drive letter.  All other discs mount correctly.  Disks with EFI partition will mount on other PCs.  All the drivers seem to be current and fuctional.

  I thought about it... after two weeks of puzzle, I finally found the cause.

  I run MacDrive 8 so I can play discs with HFS + formatting.  This program should be completely uninstalled and reinstalled after the upgrade.  I had turned it off before the upgrade, but it takes more than that.  Everything works now as expected.

  But wouldn't be INCE if Windows reads discs mac natively?

• Getting the error 2 crash for example finder LV2013 SP1

  I've not seen this since LV 8.0. I don't remember how I fixed it. Help > find examples gives me this. I didn't have this problem until I've just upgraded to SP1. I think so. Thanks in advance.

  

  I'm tired to dicking with this problem, so I just copied the BIN > 1.0 files from a machine to work on non-working machine.

  I really, really hate to do this. If my example finder .exe missing what could miss?

  Two (8.5 and 2013) attempts to repair, two uninstall (2014 and 2013) and reinstalling did not fix this problem. A simple copy and paste a folder made.

• LabVIEW FPGA SP1 2012 & EVS1464RT FPGA IO

  Hello

  There seems to be problems with the new Labview FPGA 2012 SP1 in combination with an EVS1464RT embedded Vision system, which took place only after upgrading to SP1 2012 Labview:

  • While trying to compile our code for the EVS1464RT FPGA or (Vision system embedded with e/s based on a FPGA Virtex-II FPGA) Xilinx tools (V10.1, since it's a Virtex-II FPGA) has reported an error saying that the compilation work has tried to set the property 'Data (output events)', which does not exist, so the Xilinx tools just quit with an error.

    A complete uninstall and reinstall 'clean' do not solve the problem.

    Research has shown that there is a property correct for Xilinx tools, called "done (output events)." An extended search in the Labview upwards 'incorrect data (output events)' some text files in 2 files "resource.xml" in the directories '...\National Instruments\LabVIEW 2012\Targets\NI\FPGA\IMAQIO\IMAQIO-1 "and '...\National Instruments\LabVIEW 2012\Targets\NI\FPGA\IMAQIO\IMAQIO-5' (and nowhere else).". " Change these 2 texts to 'Done (output events)' corrected the error and allowed to compile the code again.

  • Another problem is that you can not start the VI FPGA-interactive (for example by clicking the Run button). This product just another error message saying that the VI '...\National Instruments\LabVIEW 2012\vi.lib\FPGAPlugInAG\IMAQIO-5\niFpgaOpenAndRun_IMAQIO-5.vi' could not be found (and there really is not anywhere on the hard drive).

    The FPGA VI can be started from an another VI on the target host by using the function "Reference open FPGA". Then it works without any problems, so the bitfile has been obviously compiled correctly.

  All of this worked out of the box without any problems on my old installation of Labview (before 2012 SP1 update).

  The first problems now seems to be a simple typo, and using the function "Open FPGA reference" is a workaround for the second problem. But I'm very angry that National Instruments does not seem to test their software before releasing. A service pack should never break things that worked before.

  Find these alternatives cost me 3 days, which, in my opinion, could be acceptable for open-source software, but not if you pay hundreds of euros per year for a "Standard Service program. For that kind of money, I expected NOT to test all the changes that they do well.

  Best regards

  Dr. Merlin Welker

  Hello Mr. Welker.

  First of all, thank you for your comments. I'm really sorry that you stumbled on this issue. Please let me give you some background information on it.

  You are right that the update for the versions of service pack is to address reported problems and he should never break things that worked before. Unforunately, a change in LabVIEW FPGA exposed an underlying issue with e/s NOR-IMAQ driver FPGA compilation. We have identified this issue and addressed it in the Acquisition of Vision Software communicated in February 2013, including e/s NOR-IMAQ 2.6.1.

  It is now available in the Update Service of NOR. We also found and addressed the issue with the FPGA Open running and run interactively in the thatsame release.

  We recommend the upgrade to use the latest version of driver, whenever you upgrade from versions of LabVIEW, to ensure better compatibility between them. Please note that whenever you upgrade LabVIEW FPGA or Vision Acquisition Software, you should also recompile your LabVIEW FPGA projects.

  While these issues were found and corrected in the latest version, we are now reminded our development and testing processes for future versions. Please accept our apologies for the inconvenience. National Instruments is committed to your satisfaction and to maintain your confidence in our products.

  Thank you

  Elmar

• my pc crashed and I had to get back to Service pack 1 of windows XP, how upgrading to SP2?

  the pc is a compaq presario, 2 ghz, 512 MB, I don't know the State of the art, but essential software applications!

  I think it was SP3 crashed my pc, because it updated early December 2011 and has never worked since I recovered using tool system recovery but in XP sp1 and I can't seem to find how to get back to sp2.

  grateful for pointers

  You can upgrade directly from SP1 to SP3.
  Your system has currently no preinstalled, as trials for McAfee or Norton? It is advised to run their removal tools! Here are the links:
  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507
  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home
  Here are the detailed instructions for upgrading from SP1 to SP3:

  1. download the installation of SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4. install the SP3. Restart TWICE.

  5 move to IE8. Restart TWICE.

  6. install anti-virus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7. make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  8 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  9. reactivate the automatic updates.

  After the back if you need guidance.

• Upgrade of Microsoft windows

  I have windows vista Home premium. I am installing an anti-viris of norton program. Error message that I need to upgrade to sp1 or higher or windows 7. what I would do.

  Hello

  Click Start > right click on computer > properties > see what Service Pack you have installed here and what little Vista version: 32-bit or 64-bit.

  You should have had Vista SP1 installed a couple of years.

  "Windows Vista Service Pack 1 five language standalone (KB936330)" 32-bit:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  "Windows Vista Service Pack 1 five language standalone for x 64-based Systems (KB936330) ' 64-bit:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=21299

  Select the correct version of SP1 to download and install, if SP1 is not already installed.

  For more problems with Norton, please contact their support:

  http://us.Norton.com/support/dtree_installation.jsp?id=installation&selected_nav=3

  See you soon.