upgrade to SQL 2008 R2 SP2 to SP3

Similar Questions

• Windows XP need to upgrade to SP2 or SP3

  Hello

  I have Windows XP SP1.  I need to upgrade to SP2 or SP3.   There are free downloads online.  can I use them? or should I buy from you?  Please me know

  Thanks in advance

  You don't need to buy anything. If you check in Windows updates, service packs must be put at your disposal. (Unless it's an illegal copy of XP).

  If you installed SP1a, you can ignore the SP2 and go right to SP3. If SP1 is installed, to install the SP2 and SP3.

  Before you install, disable your antivirus and anti-spyware such as Windows Defender programs. If you are using another firewall, disable and enable Windows Firewall in the control panel for the installation. Once a requires SP3 and working, you can activate the third-party firewall and put the Windows Firewall. Do not keep the two running.

  Service Pack 2 for Windows XP
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en

  Steps to take before you install Windows XP Service Pack 3:
  http://support.Microsoft.com:80/kb/950717

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  Release notes for Windows XP Service Pack 3
  http://download.Microsoft.com/download/c/d/8/cd8cc719-7d5a-40d3-A802-e4057aa8c631/Relnotes.htm

  Download Windows XP Service Pack 3 here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Update for Windows XP (KB2964358), upgrade of service SP2 to SP3?

  I went on the website and tried to download the KB2964358 update), wouldn't DOWNLOAD says I need service pack 3. Where can I go to upgrade (download) service SP2 to SP3?

  I have Windows XP Home Edition Version 5.1 Service Pack 2 Internet Explorer 6.

  Last Friday, I got a virus and did a non-destructive recovery from my system. Before that, I had IE 7, anyway to extract the files from my PC?

  Hello

  The problem with viruses on the computer, I would say that you download and run a full scan of the system using the Microsoft Safety Scanner.

  Here is the link for the Microsoft Safety Scanner which is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Note:

  Data files that are infected must be cleaned only by removing the file completely.
  which means that there is a risk of data loss.

  To download and install Windows XP SP3 see the link provided below.

  How to get Windows XP Service Pack 3 (SP3)

  Hope the helps of information provided. We know the results.

• I am upgrading an old laptop with Windows XP SP2 to SP3. Where can I download an offline installer that has everything I need to upgrade?

  Setup Windows XP Service Pack 3 offline

  I am upgrading an old laptop with Windows XP SP2 to SP3. Where can I download an offline installer that has everything I need to upgrade?

  -David goods ETF investor

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en

  J W Stuart: http://www.pagestart.com

• After an edition upgrade to SQL Server 2008 R2 Standard, vSphere cannot communicate with the VIM_VCDB database

  My vCenter environment is 5.0 and has been initially implemented using SQL Server 2008 R2 Express as the database.  We have reached the limit of size of 10 GB for the Express version, so I want to upgrade the database 2008 R2 express 2008 R2 standard.

  Before the upgrade, I stopped the vCenter Server service before you start the SQL Server Setup program.  I did an "Upgrade Edition", to consider express standard.  It ends successfully with 2 minutes, and then I went and restarted the server vCenter service.

  However, after restarting the service, vSphere is unable to communicate with the VIM_VCDB.  For example, in vSphere if I click a virtual machine and click the performance tab, it tells me that it's impossible to view the web page.  It seems to be unable to communicate with the VIM_VCDB.  I have not changed all database names, or the ODBC settings, so not sure what is causing the problem.

  If I go to ODBC data sources administrator and test the Data Source, the test completes successfully.

  I have read all the documentation I could find and tried a few different things, but not found something that solves this problem.  I ended up having to go back to the snapshot backup, I took before the upgrade of the database edition.

  Anyone have any ideas on what the issue might be, or what should I do to solve it?

  Shane

  The database is probably fine.

  The vCenter Web Management Service running?

• SP2 and SP3 removes my system configuration file!

  This computer I'm is an entry door I think that a 2001... It has XP Professional SP1 on it... everytime I try to install the SP2 or SP3, it will restart for the installation... However if she never has to restart again I repair windows and restore it SP1... because SP2 and SP3 removes my file Config system... never heard of this and or any idea how to solve this problem?

  I've done several installs complete costs and...

  Make another & make the right way this time. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Tecra A9 move from Win XP SP2 to SP3 - questions?

  Anyone have trouble with their Tecra A9 when upgrading to Windows XP SP2 to SP3? I've heard horror stories with other laptops that users lock their systems or lose functionality.

  Thanks in advance for sharing your experiences.

  Hello

  I m not Tecra A9 owner but I already installed the SP3 Win and I didn't notice any strange problems after installing SP3.
  Of course, it might be possible that some drivers would not fully compatible with some fixes and patches but it seems that I m a lucky guy and there is nothing wrong with my operating system.

  But to be honest; I didn't notice any improvement after the installation of Sp3.
  However, you can install Sp3 on your system and if you have great compatibility problems you'd still be able to remove the SP3 of the system.

  Welcome them

• Program does not work after downloading the sp2 and sp3

  After spending hours and hours trying to download sp2 and sp3, I finally got to download completely successfully. for some strange reason when I try to open programs like weather bug and msn messenger they open but close immediately. How can I fix it?

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Do I need to install SP2 before SP3? If Yes, where can I find the Microsoft of SP2 version?

  I had to re - install Windows XP SP1a, from a CD of resettlement came with my Dell laptop. This was done because I upgraded the hard drive. This facility went well. I went to the Windows Update site to try to get the SP2 and SP3. The webiste is said to SP2 until you can do SP3. The only version of SP2, I find on the website says that it is for the professionals and see the link for the Service Pack to the simple version. When I go on this link there is no one version. Do I need to install SP2 before SP3? If Yes, where can I find the Microsoft of SP2 version? In addition, the site says that automatic updates SP2 but I checked my Configuration of the automatic updates and it will not take anything in. Is there a way to force the automatic update to run immediately? Thanks, Ben

  Ben,

  I totally agree with PML, you should be able to set up IE and then go to the Windows updates from there, once you get on the Windows Update site it will scan your system and implement critical updates and optional updates SP2 and SP3 should be on the list. It's a way to force an immediate update.

  I hope this helps.

  Jim

• Consistent degradation of privileges and functionality in Xp Sp2 to Sp3.

  My problem is I'm always losing administrative privileges, without apparent reason, on my Windows Xp Pro Sp2 to Sp3 upgrade facilities.  This occurs after the installation of updates after Sp3 installed on this version of Xp professional Sp2.  This has happened time and time again and becomes quite frustrating.

  Hi Lhun - Grub - AP Padma 'gro-' dul gyi,
   
  -Is this problem occurs after the installation of updates every time?
  -You receive an error message when this problem occur?
  -When you mentioned that you lose Admin privileges, does this mean that you are unable to work with the programs or access to certain files/folders?
   
  If you receive "Access denied" error message while trying to access any file/folder, follow the steps in the article below:
   
  "Access denied" error message when you try to open a folder
   
  After return with more information pertaining to the matter for us help to help you better.

• TMS SQL 2005 DB to SQL 2008

  Hello

  I have here a nice problem. We had a former TMS (v.13.1) Server installed to MS 2003 R2 with SQL 2005.

  The export of the DB has been problem free.

  Now, we need to upgrade the operating system to MS 2008 R2 64 bit. We had installed the TMS Version 13.1.2 with SQL 2008.

  How can I import the old DB for new MSDS?

  Who has an idea or if it is?

  Greetings

  Jens Lantermann

  Ditto on what Martin says with regard to the questions of Justin

• I want to try to download sql 2008 edition

  I'm trying to download SQL 2008 Edition but I have 32 bit Windows 7 processor and when I try to download error appear software 32 bit not compitible, contact you software garage

  So, how can I download my SQL 2008 edition without advice please issue me

  SQL Server 2008 requires a 64-bit operating system.  Upgrading to a 64-bit operating system, and then you will be able to install SQL Server 2008. If your computer is only a 32-bit computer, you need to replace your computer first.

• Change Vcenter DSN 2005 SQL native client for SQL 2008 native client

  Hi all.

  I tried to upgrade our Vsphere for VM Windows 5.5 to Vsphere 6.0 for Windows (latest version of January).

  The upgrade checking failed after entering the credentials of user Vcenter. The error is 'unsupported database driver.

  In fact the DSN connection uses the SQL native client 2005.90.2047. Is also on the system SQL native client 10. (Version 2009.100.2500) is installed. I think it's the SQL 2008 R2 native client.

  The SQL Vcenter database is on a remote database SQL 2008 R2 server.

  I tried to change the DSN of SQL native client 10. The service started, but I've seen lots of SQL errors in the vpxd.log. I could solve only to return to the snapshot and restore the SQL database.

  How can I change the SQL Native client to connect DSN correctly?

  Thank you very much in advance?

  Edy

  Have you removed the old DSN entry and created a new using the driver of the new (and good)? And have you checked the registry if your change reflected here (\VMware Virtualcenter\DB HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.)?

• SQL 2008 R2 SP1 and vSphere 6

  Hi all

  We are planing to install ESXi host where are hosted with our SQL 2008 R2 SP1 machines, version 6. Do you know if this upgrade is supported by Microsoft?

  I mean, we have a problem after the upgrade? Application errors, incompatibility, etc...

  Thank you

  Chris

  The virtual machine will not know that anything has been updated, but if you update the hardware version of the virtual machine update then there will be an operating system level changes. VMTools update necessary and the material presented.

  I did some updates from 5.5 to 6, including sites where SQL server is running and have not had any problems. Just make sure you test first and do you homework with the HCL, etc..

• SQL 2008 sp1 support?

  Does anyone know if sp1 for SQL 2008 is still supported?

  I checked and don't see it listed in the compatibility matrix, but thought I'd ask just in case.

  Thank you.

  FYI ANY version of a database will be supported.  If she supports SQL 2008 ALL future updates SP1, SP2, etc... will be supported, if that's what you're asking... SQL 2008 is on the list but not SP1.

  If there are major changes, which would be 2010 SQL (or other).  Service Packs are supposed to be included.