Upgrade to Windows 8 still possible during the "real" being warned?

Similar Questions

• I bought a laptop tailor-made and it turns out that there is a counterfeit Windows xp version. I want to upgrade to windows 7 instead of buy the version xp again. is this possible?

  I bought a laptop tailor-made and it turns out that there is a counterfeit Windows xp version. I want to upgrade to windows 7 instead of buy the version xp again. is this possible?

  You will need to purchase a full commercial copy of Windows 7 and do a clean install. You cannot use a Windows XP hacked as an operating system that you are eligible for an upgrade. Make sure that there are Windows 7 drivers for the hardware of the laptop. MS - MVP - Elephant Boy computers - don't panic!

• recently upgraded to windows 7 and lost all the emails saved in windows mail, is it possible to retrieve the saved emails?

  recently upgraded to windows 7 and lost all the emails saved in windows mail, is it possible to retrieve the saved emails in windows mail that are and have it transferred to microsoft outlook?

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• I have upgraded to windows 10 now, none of the applications opens saying his lack a file MSVCP110.dll

  I have upgraded to windows 10 now, none of the applications opens saying his lack a file MSVCP110.dll

  I uninstalled the program and reinstalled programs and still get the same error message

  Hi Bret,

  Please visit: error: 'Missing msvcp110.dll file'

  Kind regards

  Sheena

• Windows genuine error 0x8DDD100A during the validation of Windows XP

  Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3

  Check your region settings and Date/time in Control Panel - you are showing an error of clock synchronization.

• Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3

  Windows give error 0x8DDD100A during the validation of windows Xp Professional SP3

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: sync clock error
  Validation code: 10
  Code of Validation caching: n/a
  Windows product key: *-* - XC4Q9 - W7RTD-7Q8G6
  Windows Product Key hash: Py7sqDcPBx6etfYqog5bPl/YZ9E =
  Windows product ID: 76487-OEM-2211906-00826
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 5.1.2600.2.00010100.3.0.med
  ID: {5DBB45BE-2BA5-44AD-92B3-2FE66CB59B95} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: Registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: Yes
  Version: 1.9.9.1
  WgaTray.exe signed by: n/a, hr = 0x80004005
  WgaLogon.dll signed by: n/a, hr = 0x80004005

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: Registered, 2.0.48.0
  Signed by: Microsoft
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-230-1

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {5DBB45BE-2BA5-44AD-92B3-2FE66CB59B95}1.9.0027.05.1.2600.2.00010100.3.0.medx 32*-*-*-*-7Q8G676487-OEM-2211906-008262S-1-5-21-1232634059-1876962941-2206964983Sony Corporation,VGN-AR11MPhoenix Technologies LTD.R0130J620060626000000.000000 + 000Sony Corporation, Sony Corporation, Sony Corporation2BD13F07018400FE08090409New Zealand Standard Time(GMT+12:00)02Corporation SonyVAIO VGN - AR series109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 1FF90:Sony Corporation | 1FF90:Sony company ITCNC
  Marker of OEMBIOS string. DAT: Sony Corporation, Sony Corporation, Sony Corporation

  Activation 2.0 data OEM-->
  N/A

  Check your region settings, Date and time in Control Panel - you are a clock synchronization error.

• Y at - it an upgrade of Windows Compression that will allow the opening of a file Winzip 15?

  Original title: compatibility of winzip 15.

  Y at - it an upgrade of Windows Compression that will allow the opening of a file Winzip 15?

  Hello

  WinZip 15's a compressor of owner, so it would be exclusive to them.

  I recommend you contact WinZip support for assistance.

  http://www.WinZip.com/xsupport.htm

  Hope the helps of information.

• I lost my product key for my anytime upgrade for windows is anyway to get the product key for this drive

  lost product key

  I lost my product key for my anytime upgrade for windows is anyway to get the product key for this drive

  See http://support.microsoft.com/kb/811224

• How to make windows require a password during the installation of new programs?

  How to make windows require a password during the installation of new programs?

  Hello

  You will not be able to circumvent the password that appears before the execution of actions (installing a new program) in a non administrator account.  If you are logged on as administrator, and again, you get the command prompt, you can disable UAC (User Account Control) to stop the password dialog window.

  However, as a work around you can right-click on the installation of the program files and select run as administrator. Check if this is useful.

  Let me know if I can help you with this question or any problem related to Windows.

• There is no action at the opening of Windows media player on my windows 7 starter netbook despite the icon being present.

  There is no action at the opening of Windows media player on my windows 7 starter netbook despite the icon being present.  What could be the problem?

  First check if there is a problem of WMP or shortened.  Open WMP directly to C:\ProgramFiles\Windows Media Player\wmplayer.exe.

• Since I upgraded to CS6, I had problems with the permissions being changed on my files!

  Since I upgraded to CS6 I had problems with the permissions being changed on my files after that I have download on my server. I don't know how to fix this. My webhosting service says this is an issue on my end and it seems that CS6 has a CS5.5 with no glitch. How can I fix this to happen?

  Have you installed the 12.03 CS6 update yet?

  Adobe - Dreamweaver Support Center: Updaters

  12/12/12 The last update for Adobe Dreamweaver CS6 includes optimizations for the HiDPI screens, improves performance in Code view, rendering Live View and permissions of the FTP transfer problems addresses.

  Don't forget to restart your computer after installing the updates.

  Nancy O.

• Behavior of v$ standby_log; during the real time applies...

  Hello
  
  I would like to understand this point of view, during the REPEAT APPLY behavior or real-time applies by using configuration of log roll forward pending. as in my db, when there apply to progress, I see the status column having a CURRENT value and the column DBID value of Eve DBID where the application is underway then status column goes to UNASSIGNED value and DBID column has no value inside of it... i mean Virgin... Why is it so? Ask you please help me understand this... Here is the log
  
  SQL > select * from v$ standby_log;
  
  GROUP # DBID THREAD # SEQUENCE # BYTE BLOCKSIZE USED ARC STATUS FIRST_CHANGE # FIRST_TIM NEXT_CHANGE # NEXT_TIME LAST_CHANGE # LAST_TIME
  ---------- ---------------------------------------- ---------- ---------- ---------- ---------- ---------- --- ---------- ------------- --------- ------------ --------- ------------ ---------
  7. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  8 3903727333 1 58534 104857600 512 338944 YES ACTIVE 2.3217E + 10 5 JANUARY 12 2.3217E + 10 5 JANUARY 12 2.3217E + 10 JANUARY 5, 12
  9. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  10 3903727333 2 38929 104857600 512 235008 YES ACTIVE 2.3217E + 10 5 JANUARY 12 2.3217E + 10 5 JANUARY 12 2.3217E + 10 JANUARY 5, 12
  2. UNASSIGNED 11 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 12 0 104857600 512 0 NOT ASSIGNED NO.
  
  6 selected lines.
  
  SQL > /.
  
  GROUP # DBID THREAD # SEQUENCE # BYTE BLOCKSIZE USED ARC STATUS FIRST_CHANGE # FIRST_TIM NEXT_CHANGE # NEXT_TIME LAST_CHANGE # LAST_TIME
  ---------- ---------------------------------------- ---------- ---------- ---------- ---------- ---------- --- ---------- ------------- --------- ------------ --------- ------------ ---------
  7. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  8. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  9. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 10 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 11 0 104857600 512 0 NOT ASSIGNED NO.
  12 3903727333 2 38931 104857600 512 5120 YES ACTIVE 2.3217E + 10 5 JANUARY 12 2.3217E + 10 5 JANUARY 12 2.3217E + 10 JANUARY 5, 12

  GROUP # DBID THREAD # SEQUENCE # BYTE BLOCKSIZE USED ARC STATUS FIRST_CHANGE # FIRST_TIM NEXT_CHANGE #.
  ----------
  7. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  8. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  9. UNASSIGNED 1 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 10 0 104857600 512 0 NOT ASSIGNED NO.
  2. UNASSIGNED 11 0 104857600 512 0 NOT ASSIGNED NO.
  12 3903727333 2 38931 104857600 512 5120 YES ACTIVE 2.3217E + 10 5 JANUARY 12 2.3217E + 10 5 JANUARY 12 2.3217E + 10 JANUARY 5, 12

  DBID would be here.
  These groups of waiting for redo log files can contain either the thread 1 or thread2, several threads are used in RAC environment.

  In general architecture, once if any log switch (or) redo log is full then they will be sent in files archive, then it will be assigned to new files redo log. here in the primary redo log file, you can see the current, active, inactive state so now.

  During the real time applies, every time that data written to the primary log files, the log of the time same writer will be active and which will be assigned to the redo log file... not redo log file, you have to say standby redo log waiting for database.

  average not assigned here, this standby redo log file, can be used for the next time, perhaps earlier status as 'active '. Each time standby redo log file is active DBID so only you can see.
  If its in unassigned it will be inactive, once again if any new allocation then it will become active. similar chain / loop. This is perfectly normal behavior.

  UNASSIGNED - online redo log has never been written for. It comes to the State of a newspaper of restoration by progression that has been added, or just after a RESETLOGS when it is not the log during recovery.
  ACTIVE - Log is active but is not the current journal. It is necessary for the recovery of the failure. It can be used to block recovery. It may or may not be archived.

  HTH.

• How do I upgrade to Windows 7 Pro without reinstalling the operating system?

  I have a client who is moving from a workgroup to a domain based network.  About half of the computers are Windows 7 Home edition.  I need to upgrade to Pro so I can join the domain.  I was not able to find an easy way to do it since Anytime Upgrade no longer works on Windows 7.  The only time I did, I had to by a free license key and ended up having to completely reinstall the operating system.  So, how can I switch to Win 7 Pro without reinstallation of the operating system or go to Windows 8.

  Unfortunately, your only option now would be to buy a full version or upgrade to Windows 7 professional retail license and use the product key with the Express Windows 7 Home Premium Upgrade Wizard. It is, it's expensive:

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Re: Satellite P875 - 31 p - upgrade to Windows 8 Pro possible?

  As the owner of a Toshiba Satellite P875 - 31 p

  I have 8 Windows pre-installed, but guess that's the Standard edition and ask whether it is possible to upgrade to Windows 8 pro.

  Someone has had experience of this updgade?

  How can I find out which version of the Windows 8 operating system is installed?
  What product of Microsort should I upgrade.
  Can I buy a new Windows 8 Pro OEM license?
  Where to buy an upgrade of my existing (from Toshiba?) operating system

  Is an upgrade to widows 8 recommended Pro?

  Hello
  
  According to the info I found on the page of Toshiba, the laptop is preinstalled with common system of 64-bit Windows 8.
  
  If you want to upgrade this Windows 8 Pro version, you can buy the upgrade of Microsoft.
  
  But the question is if these updates would be really necessary for you...
  I dunno... This page and take a look at the details provided by Microsoft Windows 8 Pro
  

  http://Windows.Microsoft.com/en-us/Windows/compare

  
  You can see what are the benefits of the windows 8 Pro version would provide.
  Usually there is no big difference between Windows 8 and the Pro version.

• Windows Explorer memory increases during the night

  Hi all

  I had a problem with Explorer windows for 3-4 weeks.  I don't have any problems during the day when I am on my PC, but the problem starts in the night (at any time after 01:00). Particularly explorer.exe in my task manager would eat more than 250 MB! While this may not seem catastrophic in terms of severity, 250 MBs is still a lot of memory, a task must use. In the morning that exploring is more than 250 MB, I try to open the files .doc, .xls files, IE 7 browser windows just to see if the RAM would be released. However explore is constantly using over 250 MB. The only way to solve this (very inefficient way) is by typing ctrl-alt-del, ending explorer.exe, then 'restart' Explorer by clicking on "New task" in the Task Manager and typing explorer.exe. This works that explorer.exe loads again with the memory of charges and remains around 20-35 MBs all day (after 01:00 again!).

  I tried troubleshooting with respect to viruses, malware, Trojans and rootkits, by contacting my AV tech. I am using Trend Micro Titanium + and the tech support agent told me to do these tests:

  (1) run Malwarebytes and do a scan complete (the scan came out clean)
  (2) run Trend Micro Housecall (the scan came out clean)
  (3) run Trend Micro HiJackthis and send in the analysis logs (agent tech analyzed newspapers and answered in 2 days and stressed that there is nothing to 'dangerous' to worry)
  (4) tool of SIC (system information Collector) and see if there are any 'suspects' process slows down explore dope

  After the end of step 4, the agent tech told me there was nothing really at their end, they could do (all troubleshooting tools mentioned in steps 2-4 out literally own and didn't report any malware or suspicious processes) and recommended to contact Microsoft.

  So now I'm here and want to find a way around this problem! Again the main issue is that every night (after 01:00) of explorer.exe in Task Manager uses over 250 MB of memory. This product every day when I leave the pc for the night and I discovered that explorer.exe use over 250 MB in the morning. Also here are my pc specs:

  -Pentium D 3.2 Ghz
  -2 GB OF RAM
  -Nvidia Geforce GT 430 graphics
  -XP Pro with SP3 and latest windows updates (as of June 16/11)

  I'm not an expert in their use, but I think you should be able to get to the bottom of this help Process Explorer and/or Process Monitor.  If you find it difficult to know how to use these tools, see the Forums of Sysinternals.