Upgrade Windows 8.0 invited to 8.1 fails in VMware Workstation v10?

Similar Questions

• VMware tools will not install on Windows 2000 comments: "Setup failed to upgrade windows install.

  Just installed VMware player 5.0.0 on a host windows 7 to run a guest OS for win2k.  Going to install VMware tools, the installation program starts as expected but gives the error dialog box, ' the installer could not upgrade windows install "and closes.  How can I install VMware tools?

  See attached screenshot.

  Thanks in advance.

  Service Pack installed inside the 2 k VM?

  AFAIK the installer needs to SP 4

• Update Windows 10 November (10586 aka 1511): bcdedit/set hypervisorlaunchtype off, but VMware Workstation does not start VMs with conflict of Hyper-V

  Hi all

  I upgraded from Windows 10 Windows 10 November updated this morning.

  I have the Hyper-V role is installed and use it from time to time, but bcdedit to configure the boot loader to disable Hyper-V by hypervisorlaunchtype power off.

  This technique has worked with 10 Windows and VMware Workstation and I could start and run virtual machines

  Since I did the upgrade, I can't start VM with this standard message "VMware Workstation and Hyper-V are not compatible"

  I am running VMware Workstation 10, but suspect that this problem also exists with later versions.

  Everyone knows about this problem?

  Someone at - he found a solution?

  I'm willing to fork over $150 for 12 workstations to solve this problem, but I want to know with certainty that it is circumventing my problem.

  Thanks for that.

  Uninstallation and reinstallation of the hyper-v feature, following the upgrade of Windows Windows 10 November 10 update solved the problem.

  I still need to run the following command to disable the Hyper-V technology

  bcdedit/set hypervisorlaunchtype

  Thanks to everyone for their help.

• installation of vmware workstation 6.5 on windows 10 error

  After you install vmware workstation 6.5 on windows 10 it gets error and restart. Is vmware workstation 6.5 support windows 10? FAILED TO INSTALL. vmware workstation 6.5 on windows 8, 8.1 and 10 support. ALL SUPPORT. I still don't understand...

  VMware Workstation 6.x do not support Windows 10 and will never support Windows 10.

  VMware Workstation 6.x reached "end of support" four years, October 1, 2011: Matrix.pdf product lifecycle

  We produce updates for release until its date of "end of support".  A product may not work properly with host OSes, processors or comments OSes that are not compatible with the product, especially the things that have been published after the date of "end of support".  We put a huge amount of effort to ensure that new hardware and operating systems works with each new major release of VMware Workstation, but we cannot go back and update any previous version of product to add support for all hardware and operating systems more recent.  If we tried to do this, VMware Workstation cost much more that it is today, simply because of the amount of work required to maintain!

  You need to upgrade your installation of VMware Workstation to something more recent, or downgrade your host operating system to a version compatible with VMware Workstation 6.5.

  I hope this helps!

  --

  Darius

• Cannot install VMware Workstation on Windows 8.1 Pro 64 bit 11.1.1 - Please help

  You want to install VMware Workstation 11.1.1 on new 8.1 Windows Pro 64-bit PC.

  I had VMware Workstation 11.1.0, and deleted the original installer but did not finish the installation of the new version

  The installer gets about 2/3 way (progress bar) and then crashes, Windows Installer says Event Viewer hung.

  Race tried without firewall and AV, always not install question

  A ran the installer with / clean option and then tried again, but still he did not finish the installation process (crashes at the same place)

  Noticed in the Manager tasks that VMware Installer runs at about 14% of CPU, but nothing happens

  I'm really at a loss as to why I can't install VMware Workstation 11.1.1, all the other soft\ware settles very well.

  Please could someone help me?

  Thank you

  Peter

  Ran Windows Update Troubleshooter

  It fixed a number of things

  I could then install VMware Workstation

  No idea but why the installer got himself in this State

• I have a problem starting up a Windows XP Pro Machine virtual Windows 8 host system (which has VMware Workstation 10.1).

  I am new to the virtual machines.  For several months I've been running a Windows XP Virtual Machine in an old machine of Windows 7 with VMware Workstation 7.0.  The hard drive is having some problems at times, so I thought that I could move the virtual machine on a new computer that has an OS 8.1 Windows and VMware Workstation 10.  For example, on the Windows 7 machine, I copied the directory with all the * .vm files and pasted into the machine to Windows 8. But when I tried to start VMware Workstation 10 in Windows 8 machine, I got the message "this virtual machine policies are too old to be run by this version of VMware."  I went to the knowledge base and used the solution described here: I've deleted the lines of three 'policy' of the .vmx file and added the suffix .ancien to the .vmpl file, which actually disabled.  Now, when I try to start the virtual machine, the black screen appears with the VMware logo in the Center and everything seems fine, but Windows XP starts.  And logo VMware guard churning away as in a continuous loop.  It is not easy to stop.  The only way to stop VMware is via the Task Manager or restart the machine.

  What must I do to get the Windows XP Pro VM to run in the new machine?

  VMWare technical support suggested that I have disable 3D acceleration (VM > settings > view and uncheck the box 3D graphics acceleration).  The virtual machine starts now with some minor problems, but it is usable.  But by closing accel 3D turns, in the words of the Technical Support Engineer, David, that there is "a problem with the graphics card not imitate or through its capacity to the virtual machine.  In other words do not support to the VM guest 3D acceleration. "My next step is to make sure that I have the updated driver for the Intel HD Graphics 4600 display adapter.

  Minor problems are:

  (1) the virtual machine works best in screen mode reduced.  There are a few problems speed mode full-screen.

  (2) the VM will still work after switching on of the host.  But after execution of the virtual machine, if power you the virtual machine and the release of VMware workstation, then later, start the workstation, the virtual machine will power not.

  To turn it on again you must out of VMware Workstation, disconnect the host machine and then reopen it in one.

• Pavilion 6650z: upgrade Windows 10

  I was wondering if an upgrade to Windows 7 SP 1 Windows 10 could prove useful. My desktop computer Pavilion meets all the hardware requirements to run Win 10. It's a CTO in January 2011.

  I've already tried an update to Win 10 on-site the weekend of the new year, earlier this year. While the update process, the indexing for my Corel Photo Paint Shop Pro X 3 process lasted several hours with no end in sight. It is at this time that I decided to go back to Windows 7. Could not find the link "back to the previous Windows" in the Windows 10 settings, I used my system recovery disks to reinstall factory on my Pavilion.

  Before considering a new attempt to upgrade Windows 10, I would like to know if it's worth my time and effort to install Win 10. Also, I would like to know which is better: an upgrade in place against the clean install.

  I read Windows 7 machines that met in the hardware configuration required to win 10 has failed as well in the upgrade process, that the results are mixed at best.

  Thanks for your help.

  Westin doc

  Doc-Westin

  You are right to be cautious about making the upgrade of Win10 on a Win7 PC.

  I did it on several\ PC Win7 and it completely trashed both of them - where they were to be restored to factory settings to restore operation.

  I wrote the following to inform people about the measures to be taken during the upgrade PC Win7 to Win10...

  Desktop computers older Win7 tend to fare badly when upgraded to Win10 - mainly due to lack of HP Win10 drivers for older hardware.
  
  If you are determined to upgrade to Win10, you must be willing to do four things:
  (1) do a full image backup of disk external drive or USB stick, capacity
  (2) changes to the reserved system partitioning hard disk recommandΘes mΘthodes,
  (3) use a different approach and maybe more than one, as Windows Update to do the upgrade,
  (4) prepare for a clean install.
  
  ---------------------------------
  1: backup of images:
  This is VITAL, because the machine is doomed to failure of the upgrade, and when that happens, you will learn that GoBack to Win10 function is NOT reliable, and that can leave you with a corrupt machine that will require the factory reset and lose all that on it, to get it working again.
  
  You can avoid this by making an image backup to an external hard drive or a USB drive using Macrium reflect (MR), which provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  ---------------------------------
  2: System reserved for resizing:
  There is a small partition on the HDD with Win7 preinstalled machines known as system reserved.  It is something known as the boot loader code.  There is 100 MB format: all that is necessary for Win7.  But Win10 needs 350 MB and, in some cases, is NOT able to resize it on its own.  IF this happens, you must manually use a partitioning tool to resize it yourself.
  ---------------------------------
  3: use a different approach to upgrade:
  Windows Update is the simpler, but less reliable, way to do the upgrade from Win10.  A much better and more reliable way is to use Microsoft Media creation tool: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10 choose the upgrade this option now PC.
  
  After all this, you know that MS install drivers with only the most basic features.  Given that HP does not have drivers for your PC Win10, this limited functionality is the best you're going to get.  HP does not actively write new drivers from Win10 for the old PC Win7.  To keep all the features of your PC, your best shot is NOT to upgrade to Win10.
  ---------------------------------
  4: be prepared to clean-install:
  If you do all this, and after the upgrade, your PC works partially, this means that the upgrade is not well and stuff is still there the previous OS corrupt the functionality of Win10.
  
  You MIGHT be able to solve the problem in fact a clean install of Win10. Problem is that, often, a clean-install does not recognize prior activation, even if it should. So, before doing the upgrade, follow these instructions on the community forums Win10 on creating a genuineticket.xml file: http://www.tenforums.com/tutorials/23354-clean-install-windows-10-directly-without-having-upgrade-first.html
  
  You need more later to activate your pc Win10 after the installation of clean.
  
  -----------------------------------------------

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Pavilion d61 40f PC: upgrade Windows Vista to Windows 7 (64-bit)

  I am trying to upgrade Windows Vista Edition Home Premium to Windows 7 (64 bit) on an older machine.  In order to go forward the installation, I get the message that I need to uninstall the following programs: Business Manager and Anti-Malware Core.  I looked under "programs" and "programs" on my C: drive, but I can't find any progams by those names.

  Can someone tell me what I should look for, and where/how do I uninstall these files?

  I am a novice and would appreciate your help in simple language. Thank you very much!

  What you have is a rogue malware. Get the free Malwarebytesand scan.  During installation, you will see one already ticked box (trial) enabled. Just uncheck that.

• upgrade window

  Firefox continues to stick a window of upgrade on my desctop which I can't delete unless I force quit. I can't put updated because when I try it says that the update version does not work on my computer. How can I get rid of this Sandy upgrade window that prevents me from using firefox properly.

  You are welcome.

  While other users can find answers which have resolved a Firefox issue, please take a few minutes to come back on the forum, log in and click 'Resolved' next to my answer. Thank you.

• Satellite P300 - upgrade Windows 7 could not be done.

  Hello

  I have a problem to upgrade Windows Vista Edition family of Windows 7 Home Edition 64-bit. I followed the upgrade process includes the 3 parts of the Guide to upgrade Windows. Part 1 was successful, but when I was doining part 2 (insert the Microsoft Windows 7 upgrade DVD) I get an error message upgrading to 64-bit could not be done.

  Now, I have installed Windows 7 with 32-bit on my E: partition. But this isn't what I want and what it should be. I want to update my Windows Vista 64-bit Edition of Windows 7 Home edition 64-bit, and then I want to buy an upgrade to Windows 7 Professional 64-bit.

  My laptop model must have a BIOS update?
  Laptop: Toshiba Satellite P300-23F PSPCCE-06T03HGR model number

  Please help me in this case.

  Hello

  Do you find more infoarmations why the upgrade couldn't t do?

  On the Toshiba site I found a upgrade step-by-step instruction that might be useful:
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R02.htm

  As you can read that some programs must be removed before the upgrade. Did you do that?

• HP All In One: Lost power option after upgrading windows 10

  Before upgrading Windows 10, I could hold my cursor to the right of my screen and I'd be shown options to turn off or put my computer to sleep. After upgrade, I am unable to get this to fall down. How to turn off my computer or set mode 'sleep'?

  muskratt

  This ability was known as bar charms - and deleted for Win10 MS.

  To turn off your PC now, you go to the Start Menu and options options power, you will see here - select one of these.

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• I have a white screen after upgrade windows 8.1 on HP Pavilion e005sv 15.

  I have white screen, only the mouse pointer after work

  upgrade Windows 8.1 on HP Pavilion e005sv 15.

  Any help please.

  I have not tried the updated graphics drivers again as my client must use the laptop. I'll get to try this weekend. Thanks for your help

• P7-1298cb: Multi-color flickering lines in columns displayed on the screen after upgrade Windows 10.

  I upgraded Windows Windows 8.1 1O.  I've updated the drivers.  The monitor multicolored poster of fine lines in columns.  The lines of twinkle randomly.  The monitor is a diagonal LED of 2711 x 27 inch HP (XP600A) screen.  It is not that there is a specific monitor for Windows 10 driver.  Any suggestions on how to fix this?

  HI @TLL2016,

  Thanks for getting back to me.

  There is no update BIOS, but there is more recent graphics driver.

  Here is a link the download AMD UMA Graphics Driver.

  Just to check the monitor, here is a document for display quality problems.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Spectrum X 360: Filling of spectrum X 360 after upgrade Windows 10

  Hello

  It is a total disappointment for my upgrade from Windows 10! I bought my new spectrum X 360 a month ago, it was a pleasant experience using Windows 8 is very responsive and fluid. Since I've upgraded to Windows 10 earlier, everthing seems to be delayed for several seconds (I guessed that delay for at least 2 seconds), any, I tried to start the file Explorer, browsing the internet, same launch HP support assistant is much slower than Windows 8!

  Before the windows 10 updated, I did all the updates that are listed in HP support assistant and windows updates. When the 10 window installation was complete, I again applied all updates according to HP support assistant and windows updates. Now, I found the updates is available for both parties. But my nature of system late, please help.

  Thank you very much.

  @gaogao,

  Hello and thanks for the display on the HP support forum.  What you can do at this point that there are several updates released by microsoft and hardware vendors is running the Windows Update Troubleshooter.

  If this fails to solve the problem.  The only option will be to restore the operating system to the previous, until HP gets the drivers so that they can release them on the support page for your laptop for Windows 10.

  Thanks again for posting and have a great day.

• Pavilion dm1: failed upgrade Windows 10 other dm1

  Upgrade Windows 10 would not move on my Pavilion dm1 (A1N56AV) after you fix all of the problems identified by the Support Assistant and Forum.  It hangs at "working on it..." "Downloaded ISO upgrade of Microsoft, engraved on DVD and ran from the DVD. Seemed fine until he asked for a product key Windows 10. Suspected that my Windows 7 64-bit edition unit bombed a mass program affecting the eligibility of license. You want to confirm this!

  I tried a "clean install" as well, and got stuck in the product key.  It must be installed as an update of the support of Windows Setup https://www.microsoft.com/en-gb/software-download/windows10 the upgrade with exisiting Apps or in my case only sucessfully but keeping all files on my DM1.