I have a white screen after upgrade windows 8.1 on HP Pavilion e005sv 15.

Similar Questions

• I have a white screen after upgrade windows 8.1 on HP Pavilion 15-e092se

  I have the blank screen, mouse pointer only works after upgrade windows windows on HP Pavilion 15-e092se 8.1.

  Any help please.

  Yes you are right

  I had installed version of bad for graphics drivers intel so I opend laptop in safe mode and then deleted bad drivers after that I restarted the laptop, then it opened again, once disappeared from the blank screen I installed the latest version of the graphics drivers intel BIOS driver from following link:

  h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5394554#n402

  or you can download graphics drivers intel Web site to intel.

  Thank you

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Wanted: White screen after 10 Windows Update - problem even when back in windows 8.1

  Hello

  I've updated to windows 10 and after a few hours, the main screen of my laptop went blank but my second monitor that I use with a HDMI cable still works.

  Here is a screenshot - one screen shows white and I'm typing this on screen 2 (continue below)

  I've updated my drivers in Device Manager but problem persists, here's my profile for screens and link to full

  (continue below photo)

  

  Complete specifications

  http://Speccy.Piriform.com/results/ZRXCgJC8x3PrsszxBodRVhn

  From my understanding the cables of the screen white screens LCD is still, this problem started after the update of Windows 10 so I'm reluctant to think it's that. My laptop is still under warranty but do not want to send in if he didn't need that I need for work.

  I found some information online saying that a restore Image will not work, but I have an and you can try it if need be.

  Other information found online says that my computer basically "forgot" that I have a main display to get out information in and make the screen and that's why my second screen works perfectly and me might be able to solve this problem with the start of the saving mode and try to fix it from there again I've never done this and don't want to cause more problems doing things like that.

  What could be the best way to go forward with this problem is to say. :

  * Is there a way to check the LCD cables without disassembling the computer. (Don't want to do that, and don't think it's the fault)

  * System Restore will help

  * Where / who should I contact for help in this regard

  Thanks for any help provided and please tell me if you need any other info to help. I really want to to fix the problem rather than take it to a guy or HP

  whitescreenUser

  It's a bad screen. The upgrade of Windows 10 timing is a coincidence. You can continue to use it as a desktop computer with an external monitor forever.

• P7-1298cb: Multi-color flickering lines in columns displayed on the screen after upgrade Windows 10.

  I upgraded Windows Windows 8.1 1O.  I've updated the drivers.  The monitor multicolored poster of fine lines in columns.  The lines of twinkle randomly.  The monitor is a diagonal LED of 2711 x 27 inch HP (XP600A) screen.  It is not that there is a specific monitor for Windows 10 driver.  Any suggestions on how to fix this?

  HI @TLL2016,

  Thanks for getting back to me.

  There is no update BIOS, but there is more recent graphics driver.

  Here is a link the download AMD UMA Graphics Driver.

  Just to check the monitor, here is a document for display quality problems.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Major problem with the touch screen after upgrade Windows 10

  I bought a Lenovo Yoga 3 14 "a few weeks ago and upgraded to Windows 10 as soon as I got it.

  Since I started using it, the touchscreen will be occaisionally go "crazy". Crazy is the best way I can describe it because it will start input touch by ignoring or doing his own random touch input on the screen. Nothing the laptop will start to switch between windows and opening and closing of the things.

  This laptop is not running Windows 8.1 long enough for me to know if she has had this problem before the upgrade.

  Any ideas?

  Nice day.

  For information, please see: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/td-p/20...

  and then more precisely: https://forums.lenovo.com/t5/Lenovo-Yoga-Series-Notebooks/Yoga-3-14-inch-Touch-Screen-Issues/m-p/214...

  I hope this helps.

  Kind regards.

• White screen after Upgrade of Bios to 3.15 on X 200

  Nice day.

  Yesterday, I used the iso Bios updated the bios on my x 200.

  By following the instructions given on page [1]. After the reboot

  the system, as requested by the Bios-Update, the screen remains

  empty. There is no beep or any sign of life on the screen.

  Is there a way to fix this? Do I have to replace the motherboard, or

  is it possible to fix it "cheaper"?

  Thanks, Tobias

  [1] http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-70348

  I would probley removing the HARD drive and try a reboot with chip ram only see if you get any Bios screen on reboot.

  The fact that this started only after you tried Flash bios probley means that your bios is damaged not a very easy thing to fix, so lead orgs surgestion to a bios recovery program.

  Looks like there are a few other bad similar experiences of bios update:

  http://Forum.Lenovo.com/T5/X-series-ThinkPad-Laptops/X301-won-t-start-after-BIOS-update/TD-p/150931

  Perhaps removing the CMOS battery could work for you as well

• HP Pavilion G6-2146sl: white screen after upgrading an AMD A6 - 4400 m for an AMD A10 - 5750 m

  Hi all, I upgraded my HP Pavilion G6-2146sl of the A6 - 4400 m for the A10 - 5750 m, but when I turn on the PC, the screen stays black and nothing happens. What can I do? Thanks in advance.

  Everyone here said it that this processor work? It is not listed in the manual and is incompatible just pure and simple. It will never work on this motherboard. Here is the Manual:

  Manual

  Top of page compatible processor is

  CPU AMD® A10 - 4600M (3.2 GHz/2.3 GHz, 1 600 MHz/4.0 MB L2 cache, DDR3, quad core, 35W)

  I hope that you can exchange it for one that will work. Post back with more questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• White screen after log-in

  I have a white screen after login, but it lasts for about 30 seconds my desktop appears.  Any ideas?

  I ran Microsoft Security Scanner and everything out very well.  I have McAfee Anti-virus works as well.

  Hello LA_Hay,

  Thanks for posting your query in Microsoft Community Forum.

  You did it any significant hardware or change software on the computer before this problem?

  A problem with the card installed on your system, might be a major cause of the problem. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Step 1: Try to start your system in a State of services necessary to the operation and a minimum set of drivers enabled, called Safe Mode.

  Start your computer in safe mode

  Step 2: If you do not have the white screen in safe mode, try to clean the system startup:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  If the problem persists, try Method 2.

  Method 2:

  Update your graphics card.

  1. Open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.
  3. Click the driver tab, click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer's Web site and download & install the latest driver.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Black screen after upgrading to Windows 10

  I upgraded from win 8 to win 8.1 and charge upward to my connection. Once I connect the stage is empty with no office or whatever it is. My only access was with the Task Manager and from there I was able to get to the control panel but I can't restore to previous Winows. I was able to get online and I tried to switch to the window 10 and it loaded but unfortunately do not have a product code to win 8. And I don't have a product code to win 10 or win 8.1.

  can help me, thanks

  Bill

  Hello

  I realize the inconvenience that you are having with your PC, as the screen goes black after you log in. I will certainly help you to question.

  I suggest you refer to the suggestion of Sharath Srinivasa on August 7^th, 2015:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-hardware/black-screen-after-upgrading-to-Windows-10/cf3b4559-67d8-40E0-9cf2-ebf4528e1e78

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• I tried to install windows 7 on my mac desktop now, I have a white screen? Help any ideas?

  I tried to install windows 7 on my mac desktop and now I have a white screen. any ideas to return me to the world of apple?

  How have you tried to install Windows 7?

• .exe white screen after you have used the application on a programme of work Builder.

  Hello

  I am new to Labview development and I have a problem.

  I changed an application to fit my needs and when I run it there is no problem (Labview 7 Express) in debugging.

  After using the application builder to build my new soft, I have a white screen at launch.

  I tried before using the application generator and succeed with this same software (when my changes were in progress), and it worked.

  Do anyone have an idea? You need more info?

  Thank you.

  
  

• Monitor turns to white screen after the screen saver

  Actual title: white screen

  Yesterday, I started to have a white screen on my computer screen shortly after the appearance of the screen saver. Monitor still works but this means it will come out? Screen stay white throughout the night.

  Hello

  (1) do you have made no changes before this problem?
  
  (2) do you use pictures as a screen saver?
   
  See the below link that supports you in updating the graphics driver and check if the problem persists.
  
  Method 1: Update a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 2: Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: You can also try using a different screen saver and check if that helps.
   
  Hope this information helps.

• LR cc developmodule do not work after upgrade Windows 10

  after upgrade Windows 10 development screen freezes and I have to restart LR

  I love a piece all about the problem on the adobe Web site. I have a graphic processor of AMD radeon HD 7500 series and manually turn off the processor resolved the LR crashes.

  Thanks for the reactions