Upgrading database 10.2.0.1 for 11.1.0.7 use Datapump

Similar Questions

• Any specific disadvantage of using DataPump for upgrade?

  Hello

  Here is my config

  SERVER A

  Source o/s: Win 2003

  Source DB: 10.2.0.4 (32 bit)

  DB size: 100 GB

  SERVER B

  Target operating system: Win 2008 R2 sp1

  Target DB: 11.2.0.3 (64-bit)

  I have to upgrade 10g database on server A, installing 11 g on ServerB. I haven't used assistant upgrade database or RMAN or similar utility to make a 10g upgrade to 11g at any time in the past.

  Here's my question...

  (a) I was intending to use datapump to perform this upgrade (downtime is not a problem), because I know how to use datapump, do guys see any potential problems with this approach? OR

  (b) based on your exp do you suggest I should avoid option (a) because of potential problems and use other methods than oracle suggested as upgrade wizards, etc.

  I'm open to these two options, it's just that, as I'm not an expert at this point of time, I hesitated a little bit to go with option (b)

  DB is believed to suffer from 32 to 64-bit. Not sure if that would be a deal breaker.

  Note: The upgrade is supposed to happen on the 2nd Server. Can someone provide high level title pointer markets.

  -Learner

  If the downtime is not a problem, datapump is certainly an option. How big if the database? The steps are documented

  http://docs.Oracle.com/CD/E11882_01/server.112/e23633/expimp.htm#i262220

  HTH
  Srini

• Upgrade database Oracle 10 g to 11g use Datapump

  Hi all
  
  I'm planning our oracle 10g to 11g database use datapump in windows environment. I used developer sql to perform the upgrade in a TEST environment, I took any export DB 10 g and I then imported into DB 11 g. but I faced a lot of error during the import. So, I have attached the log file and I wait your help.
  
  [Log file | https://dl.dropboxusercontent.com/u/14131772/IMPORT.LOG]

  user13289313 wrote:
  Regarding this error ORA-31684: type of the object TYPE: "SYSMAN." "' MGMT_JOB_STEP_LIST ' is already no problem with him.

  But what of the errors below.

  ORA-39083: Type as procact_system cannot be created with the object error:
  ORA-20000: Incompatible Version of the Workspace Manager installed
  Because sql is:
  BEGIN
  declare the worm varchar2 (100); entire dummy; vdummy varchar2 (30); compile_exception EXCEPTION; PRAGMA EXCEPTION_INIT(compile_exception,-06550); invalid_table EXCEPTION; PRAGMA EXCEPTION_INIT(invalid_table,-00942); createErrorProc procedure is immediately start run "create or replace function system.wm$ _check_install return boolean is begin to return the value true;"
  Treatment of type of object DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ
  ORA-39083: Type THAT PROCOBJ cannot be created with the object error:

  PL see this Doc MOS

  DtaPump Import (IMPDP) error ORA-39083 ORA-20000 when Incompatible Version of the Workspace Manager is installed [ID 730373.1]

  ORA-39325: TABLE_EXISTS_ACTION cannot apply to "SYSMAN." "" MGMT_METRIC_COLLECTIONS ".

  ORA-31693: Table object "SYSMAN data." "' MGMT_JOB_CRED_PARAMS ' failed to load/unload and being ignored because of the error:
  ORA-29913: error in executing ODCIEXTTABLEOPEN legend
  ORA-29400: data cartridge error
  ORA-39779: Type "SYSMAN." "' MGMT_JOB_VECTOR_PARAMS ' not found or conversion to the latest version is not possible

  ORA-31693: Table object «OLAPSYS» data "" CLASSIFICATION of CWM to $"could not load/unload and being ignored because of the error:
  ORA-29913: error in executing ODCIEXTTABLEFETCH legend

  You use the OLAP features? If this is not the case, this can be ignored.

  Information about the installed database components and patterns [ID 472937.1]

  >

  ORA-39112: type of dependent object TRIGGER: "SYSMAN." «MGMT_SEVERITY_UPDATES ' ignored, base object type TABLE: "SYSMAN".» "" Creation of MGMT_SEVERITY ' failed

  ORA-39148: cannot import data in pre-existing table "SYSMAN" of the queue. "" AQ$ _MGMT_NOTIFY_QTABLE_G. Table_exists_action of ADD is ignored for this table.

  Ignore all the SYSMAN errors

  HTH
  Srini

• Upgrade to Windows 7 is available for Satellite Pro U400?

  Upgrade Windows 7 offer is available for this laptop?
  Satellite Pro U400

  Post edited by: Renad26

  Hello

  You can find the Win 7 upgrade capable notebooks here:
  + http://eu.computers.toshiba-europe.com/-> Windows 7 Upgrade-> Toshiba laptops that are eligible for the upgrade to Windows 7 +.

  The Satellite Pro U400 PSU45E is Win 7 eligible.

  Welcome them

• upgrade to support/drivers of material for Pavilion dv8000t with Win 7

  Just upgraded my 2005 HP Pavilion dv8000t for Win 7 32 bit home premium.  Only XP was initially available, and now HP support will not recognize anything whatsoever to allow driver downloads.  Anyone else run into this?  Ideas, suggestions?

  Thank you very much

  Darth

  Hi, Darth:

  Use does not install drivers for the devices that update of windows Vista.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1832444#N614

  If you cannot connect to the internet, please post the hardware ID's for Ethernet controller and network controller.

  I will guide you how to find the hardware for the network controller ID, and if you want, you can post the hardware ID's for all the missing devices, and I'll see what I can find.

  Go to Device Manager and click on the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN

  If your model has a bluetooth radio, Vista driver will not work, so here's another model W7 bluetooth driver.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76382_1%257CswEnvOID%253D4052%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Upgrade my Server 2008 r2 Foundation for 2012 r2 Server standard

  Hello world

  Need to know the extra cost to upgrade my Server 2008 r2 Foundation for standard 2012 r2 server.

  How do I do this?

  Thank you

  Prakash Sarkar

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can I upgrade vista ultimate 32 bit sp2 for vista 64-bit?

  Can I upgrade vista ultimate 32 bit sp2 for vista 64-bit?

  Ranging from a 32-bit operating system 64-bit operating system is NOT a upgrade path.

  It must do a clean install with a full version of a Vista 64 bit operating system.

  How to do a clean install:

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean installation.

  And save all data because the hard disk will be wiped.

  See you soon.

  Mick Murphy - Microsoft partner

• Can upgrade you a hp Mini 1030nr for windows 7

  Can upgrade you a hp Mini 1030nr for windows 7.

  Hello:

  Looking at the material, it should not be a problem.

  http://support.HP.com/us-en/document/c01600627

  Run the windows upgrade advisor and see what it reports...

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  You should be able to use the Vista drivers from support for your laptop and for some drivers driver page W7 does not install, or you can find them in another Mini with a similar material which have W7 drivers like this...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=4048245&query=110C-1150SF&tool=s-002&

• This Windows 10 upgrade, free of charge, is available for other countries outside the United States? If so, what do you think when will be available?

  This Windows 10 upgrade, free of charge, is available for other countries outside the United States? If so, what do you think when will be available?

  Julio

  It is available worldwide for any OS (win 7 SP1, Win 8.1 eligible) and if you put updated in the first year, it's free for the life of the device.  It will be released July 29

• BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

  How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

  Hi niranaja

  If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

  1. download and install on your PC a pack OS with any language by carriers

  • (Make sure you download for the same phone model)

  2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

  Then using software office perform your full backup of your device.

  3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

  4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

  Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

  Software.

  Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

  KB13067 : How to get smart BlackBerry phone language packs.

  So please try it and let us know.

  Prince

  _____________________________________________________________________________

  Click 'Like' If you want to thank someone.

  If problem resolves mark message (s) as a 'Solution', so that others can use.

• "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

  Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  Which edition of Windows 7 is installed on the machine?

  Which edition of Windows 7 you are trying to do an Express upgrade to?

  Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

  ---------------------

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I want to have a dual system of Windows of Windows 8 Pro and windows 7 Home Premium. I upgraded from my old BONES (Win7HP) for Win8 Pro. Is it possible to recover my old OS back to get a double window system?

  My laptop, a series of satellites M840 Toshiba (i7 processor), which I bought in mid June 2012. Because my laptop is eligible for Windows upgrade offer, I decided to upgrade the old OS (Win7 HP) to the new operating system (Win8pro) for just a price of $ 17.99 (should be USD). After the upgrade, I discovered that I could have 2 OS on a single disc, but it was too late because I already upgraded to Pro Win8. I have a backup before I installed Pro Win8, so can I use this backup to recover my old OS and continue to have a dual operating system on a hard drive? and my key Win8 Pro can be used again on this same laptop? I also improved my Win8 Pro with Windows Media Center. Thanks for your help in advance!

  Your key to upgrade of Windows 8 is good for use on another computer, so it is used to upgrade whatever operating system is on a different computer.

  There is no way for a dual boot of the host operating system with an upgrade disc.

• Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

  I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

  However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
  "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

  What should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I am currently creative Member Cloud using the Plan of photography (paid annually).  I would like to take advantage of the upgrade promotion to the full level for $29.99.  Can I take advantage of the promo before it expires may 29?

  I am currently creative Member Cloud using the Plan of photography (paid annually).  I would like to take advantage of the upgrade promotion to the full level for $29.99.  Can I take advantage of the promo before it expires may 29?

  Contact Adobe Support by chat or phone to see what can be done...

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  Phone support | Orders, returns, exchanges

  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

• Upgrade WHO 10.2.0.5 for 11.1.0.1 ORACLE_HOSTNAME

  Hi, guys
  
  I'm going to upgrade WHO 10.2.0.5 for 11.1.0.1. Current configuration is active passive protected by clusterware 11.1.0.7. Repository of grid control is in the CARS on those nodes.
  The question is: to WHO do I need to oracle_hostname before running export. / runInstaller command? Or the upgrade process will take care of it and pick up the virtual host name and will not re set my 500 agents again.
  
  Thanks in advance guys

  The installer will choose the right host name.