Upgrading ISE to the deployment of node 2.0 - two

Similar Questions

• State of the #2 NSX controller node remains on the DEPLOYMENT

  Hi all

  ************************************************

  Let me start by describing my laboratory:

  vSphere 5.1 = > vCloud Director 5.1 = > vApp = > nested ESXi 6.0.u1 = > vcsa (outdoor installation) 6.0.u1 + NSX 6.1.4 Manager + NSX controller

  ************************************************

  I am facing a strange behave of my NSX Manager.

  I have deployed the first node in the cluster of my controller with no problems and when I deployed the second node, the device has successfully deployed but never started. In addition, the status of this new controller is stuck on the "deployment." I started the #2 controller and check is (see the control cluster status) and everything is ok.

  I already tried without any improvement for:

  • Shut down the node, and then restart the Manager only
  • Restart the new node and the Manager,
  • keep the node running, then restart the Manager

  Sounds like a problem of database. Is a person of experience already the same?

  I will try to find a way to get and clear the record in the base during this time, do not hesitate to suggest

  Thanks in advance

  

  

  Finally, I thought about using the API NSX to go further.

  I've performed a GET method to list my controllers and their status through https://NSXManagerIP/api/2.0/vdn/controller.

  I was able to confirm the status of the second node

  

  As the method is not allowed (please, please let me know if I'm wrong) I had to remove the controller to do this, I launched a https://NSXManagerIP/api/2.0/vdn/controller/controller-2?forceRemoval=FalseDELETE method.

  I was then able to re-deploy my controller :-)

  PS: Note that if you delete the last controller, you will have to force the deletion by using the command https://NSXManagerIP/api/2.0/vdn/controller/controller-2?forceRemoval=true.

• Upgrading ise Cisco and licenses

  I nedd upgrade of version 1.1.2 patch 4 to 1.1.3

  the deployment is distributed so that the shared deployment technique should be used:

  http://www.Cisco.com/en/us/docs/security/ISE/1.1.1/upgrade_guide/upg_dis_dep.html#wp1052969

  the guide is quite difficult to follow as there are has some missing licenses information that can potentially cause downs of service:

  in particular my questions reguarding the guide are:

  -OUR license is registered on the primary node of PAN only-

  (1) main node of PSN deregistration "D": that it will use the license? the inherited (10000 points of termination) or if he loses the license completely and lock the network authentication?

  (2) when the node "B" will be struck out and will become autonomous what happens to its licence? It will be lost? and what will happen to the "D" node when added to node "B"?

  (3) when I move back node "A" (after the upgrade and the record to the node "B") to the previous state of primary PAN, it is said that the license must be reloaded in it was lost when adding it to the node "B"... and in the meantime? No node will not authenticate because the primary node is unlicensed?

  TY

  Giuliano,

  De-registered node will always use its own license, that is, it becomes autonomous box without knowledge or information about anything around her. Assessment or any license you provided with.

  Of license is made by admin active cluster node, depending on its license.

  Take a look on:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCug04405

  I do not think that license needs to be recharged, but maybe it's just my memory doesn't serve me. I'll check that one again.

  M.

• Photosmart C4795 on fall back on the deployment of Airprint for 2011 schedule?

  Hello:

  I recently bought the printer Photosmart C4795 wireless in September or October 2010. It is not on the deployment schedule of Airprint for 2010 on the PDF on HP support.

  Would you know if The Photosmart C4795 wireless printer will be on a schedule of deployment of Airprint for 2011 or internal parts rely before the deadline of compatibility?

  I want to upgrade this printer to be Airprint compatible.

  Thank you!

  Ziffel

  One of the main requirements for Airprint is the must have ePrint printer.  I do not see the C4795 on ePrint models list, so it will not work with Airprint.

  Another solution is HP iPrint, it allows to print Apple portable devices via a 802.11 wireless connection.

  Here is a link to a document iPrint, it will show you how to get HP iPrint.

  http://support.HP.com/us-en/document/c01616126

• Features of the Matlab script node

  Comparing only the specific features that overlap of Matlab and Labview, is there an advantage for the latter to be able to run blocks in parallel? What exactly is the purpose of the Matlab script node in Labview?

  MathScript can be deployed on real-time hardware (if that is the question). I don't know about the others.

• DLL does not not on the deployed computers

  Greetings;

  I'm working on a VI to run a night vision camera.

  My PC is win 7 and I'm under LabVIEW 2014.

  My machine deployment is a tablet of Microsoft Surface on 10 to win.

  The camera driver software is Pleora 4.0.3.3049, I'm also using some functions IMAQ.

  The VI and the exe file I built work fine on the development Machine, the display is working and running between 30 and 60 frames per second at 1280 x 1024 color.  (many PC resources)

  I have a command of consloe window that also works on the development of PC.

  It is not run on the deployment device, (tablet of Microsoft Surface on 10 to win).

  My first numbers have been associated with the location of 3 .dll files.

  they are:

  NIVison.dll

  NIVisSvc.dll

  eBUS_C_SDK.dll - (this is the one of Pleora)

  The exe would question me for the location.  I solved this by adding them to the folder where the exe file was stored.  A temporary workaround solution.

  When the lance of the exe, I get a message of "Lack of external function" with the sub induvidual VI which calls a specific dll.  15 in all.

  The façade is as I expect, but I get the message above this one.

  I installed and re installed the drivers for the cam on the surface.

  I checked that the surface has the full version of RTÉ.

  Thanks in advance;

  Mike

  Thank you to:

  Paul and Ren of the service request line the problem is identified and corrected.

  Thank you both for your help today!

  I just had a major breakthrough, looking at the forum thread that Paul has pointed out to me I went to each call node function Lib changed to specify the path on the block diagram and added a constant application directory to each

• Change password for local administrator on Cisco ISE in distributed deployment

  Hi guys,.

  I managed four ISEs of Cisco in a distributed environment.

  First ISE is the Admin, second ISE is followed, the third and fourth are the PSN.

  We use local authentication. We want to change the password for the admin user name.

  -What does that by a lucky break the connection between the ISEs or will be the new password pushed to each of them?

  There is no possibility to change the passwords on the PSN as the administration tab is not available.

  I know that when I create a new user, he's pushed all ISEs.

  Thank you.

  Serge.

  Serge,

  Good question.  Once I read this question, I had to know, so I tried this in my lab.

  I changed the admin password and change successfully, I had to connect to ISE using the new password.  Then I noticed on my dashboard to my node communication school admin and my PSN was green.  YAY.  I went to the page of deployments and could access the configurations for the nodes.

  Trust, I logged the secondary node using the NEW PASSWORD.  So, Yes, not only communication does NOT break, the new password is pushed down to all nodes.

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• Upgrading ISE file copy error

  According to the upgrade to 1.2:

  Copy the Upgrade Pack towards the local disk using the copy of the ISE Cisco's CLI command: disk of ise-upgradebundle - 1.1.x - to-1.2.0.899.i386.tar.gz copyftp-filepath: / again, after copying the package to upgrade to the local drive, check that the size of the package upgrade from your local disk is the same as it is in the repository. Use the dir command to check the size of the entire upgrade in the local drive.

  When I try to run this command, I get the error message:

  ' % long command detected at ' ^ "marker".

  using the following command:

  ' copy the repository FTPDPZ ise-patchbundle - 1.2.0.899 - 1 - 82500.x86_64.tar.gz.

  I also tried to replace the repository + name with an IP address, with just the name of the repository and 100 other things.

  I tried to look at until a 'long command' is, but I come up with nothing.

  What is the good verbage to use this command?

  Hey David,

  It seems that you have been a little too long watching it, and accidentally hurt interpreted the guide! The "copy" command uses no configuration repositories currently in the running-config, so you must type it out as follows

  copy [email protected] / * //ise-patchbundle.etc.etc.etc.tar.gz drive: \.

  When you type out, there are more arguments to the command he knows he has to manage, then it throws the error '' long command. ''

  1               2               3                                                      4                                                            5

  copy of repository disk FTPDPZ ise-patchbundle - 1.2.0.899 - 1 - 82500.x86_64.tar.gz:.

  vs

  1                                                                     2                                                                                 3

  copy [email protected] / * /\ise-patchbundle.etc.etc.etc.tar.gz drive: \.

• Error on the deployment of OpenStack in VIO

  Hello

  I try to install Openstack on vsphere 6 and the deployment produces a message error 'nodes are inaccessible.

  I denied the firwall on all the ESXi, but the same error persists.

  Here I have the screenshot of my vsphere 6, all components with the screenshot of the error msg.

  If anyone can help me I will be grateful.

  could you please check if the control VMs created is in the same vlan as a manager of VIO? We can have a webex if you wish, please let me know your time zone, thank you.

• The deployment of Data Mining Project

  Hello

  I am new to the DataMining. I have finished a tutorial on the right customers when they buy new offers or not a video tutorial but it is very similar to this

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/12C/R1/DM/ODM12c-PQ.html?CID=8307 & SSID = 122587621791540

  Prediction (classification). I understood it completely. After connecting the models of classification to view output or a table I want results. and I got the table named Prediction_view in my diagram

  I want to ask some questions.

  1. How can I register these predictions on visitors just be inserted?
  2. Whenever I need predictions, should I work on the project again and do view applied fees or a table?
  3. After deployment using (right click on the table or the data output view), I had all of the .sql files in my directory. Are only as files used for the fresh prediction algorithms?
  4. is it possible to refresh this view before making predictions?

  In fact, I have same scenario in my application. customer quote management and sales. After sending the quote of sale to the customer, I want to apply the weather customer Classification will respond to that quote or not?

  Thank you.

  Please see this white paper on the deployment of workflow using generated sql scripts

  http://www.Oracle.com/technetwork/database/options/advanced-analytics/odmrcodegenwhitepaper-2042206.PDF

  http://www.Oracle.com/technetwork/database/options/advanced-analytics/companion-2042207.zip

  I will use the workflow in the white paper for example to answer your questions.

  1. How can I apply these predictions on visitors just be inserted?

  In the workflow of demo, the INSUR_CUST_LTV_SAMPLE will APPLY node contains new data to be applied (Apply node) to the (node class Build) model for predictions.  In your case, you have a Data Source node that contains customer data has to be inserted.

  2. whenever I need predictions, should I work on the project again and do view applied fees or a table?

  In the workflow of demo, the node SCORED_CUSTOMERS captures the predictions.  Note that the node creates the output as a VIEW (SCORED_CUSTOMERS_V), this point of view always reflect predictions for new data.  There is no need to run any of these nodes again for new data, the SCORED_CUSTOMERS_V view always grabs the latest data based estimates.  Had created the output as a TABLE instead of that node, you must run the node to persist the new predictions.

  3. once deployment using (right click on the table or the data output view), I had all of the .sql files in my directory. Are only as files used for the fresh prediction algorithms?

  Please see the white paper for the use of script files.

  4. is it possible to refresh this view before making predictions?

  See above responses.

  Thank you

  Denny

• Why must update the ADF BC connection details for the deployment?

  I know it's a matter of the ADF, but still post in this forum that it was found in the deployment of BPM on OBPM 11.1.1.6. I get a bpm of the internet project and decide to test it on my local. The goal was to complete the payload of the process dynamically, i.e. based on the selection made by the participant on the user interface (a component of ADF to a table of database management is created and made on the form of task for the user to select). I imported the code on my JDev and changed the JDBCDataStore for both Module local <>& module < Module > Shared in running the application configurations to point to a Data Source that I created on my WLS.
  
  Assuming that's all it was necessary to test, tried to deploy the application on my WLS. Deployment failed with a logon - question usname/pws 'incompatibility '. It was very strange because I tested the data source after it is created. It took time for me to understand that it wasn't ' the JDBCDataStore that was causing the problem but it seems that the creator of the application created a database connection to connect to its local database to create the application's business components. I had to update correct 'uname/pwd"(i.e. the one on my local) to run the deployment.
  
  Now coming to the question - I think that connection at the base is a configuration at design time to create business components? Once they are created in the project, the deployment should be agnostic of the environment, as long as we upgrade our TIME configurations correctly? Someone please help understand that. With my limited understanding of the ADF I prefer having an expert comment and clarify this point.
  
  Thank you
  GSR

  Uncheck "Auto generate and synchronize weblogic descriptors - jdbc.xml during deployments" in properties of Application-> Deploymennt-> EAR used for deployment

  refer
  http://theblasfrompas.blogspot.in/2010/05/JDeveloper-11g-ADF-deployment-using.html

• Number of client for the deployment program

  Hello.

  I'm trying to register my company on the deployment program, but struggling to get the customer number.

  Someone who can help me out here?

  42 employees and the plan is that they must get their own iPad that we can manage easily thanks to our it staff.

  Enterprise
  1-866-752-7753

• My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3

  My iPhone-ish syncs with macbook pro when it comes to iTunes. Message reads "iPhone need latest version of iTunes. I can't understand how to upgrade iTunes on the iPhone, unless it comes to update the operating system. I guess I have the latest OS, 9.3.2 on my iPhone. Any help for this problem?

  • Sync with iTunes on a Mac or a PC requires:

    • Mac OS X v10.8.5 or later
    • PC: Windows 7 or later
    • iTunes 12.3 or later (free download from www.itunes.com/download)

  iTunes too old and too old osx to support necessary to have iTunes, you will need to update osx to update iTunes to work

• Upgrade memory on the Satellite 2410

  Hello.

  I have a Satellite 2410 703 and I would like to upgrade my ram to 1024. There are now two SoDimm 256Mb@266Mhz (Pc2100).
  My question is: can I use any other module of Kingston at 333 or 400 Mhz?
  Are they compatible?

  Thank you very much.
  Antonio

  Perhaps this site can help you:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6083&ft=m&St=3

  Usually you can also use the RAM modules with the speed of 400 Mhz because the laptop supports a FSB 400 Mhz.

  But it is important to use the right module as 200 pin PC2100 DDR SODIMM specification

  I hope that I can help you

• Given the 10.5.8 to 10.6 Snow Leopard upgrade.  Meet the Intel/memory minimum requirments.  After a full backup of course.  Anything I should be aware of before trying this?  Possible to the functions/effects?  Due to browser problems

  Given the 10.5.8 to 10.6 Snow Leopard upgrade.  Meet the Intel/memory minimum requirments.  After a full backup of course.  Anything I should be aware of before trying this?  Possible to the functions/effects?  My data (mp3, photos, documents, etc.) will not be affected?  I also have Windows for Mac.  It will not be affected?  Recent browser performance is untenable in weeks.  Safari 5.0.6.  Now even my Firefox is fact-zo.  Process seems simple enough, but thought I would ask a preview as many reviews on here seem to go anyway in regard to recommend it.  Thought that I have gathered a few comments before the trigger (or not) thank you to all those wh

  Just to start with this one:

  I also have Windows for Mac.

  I assume you mean that you run Windows in a virtual machine such as Parallels? If so, the machine virtual peut must be updated.

  When you install Snow Leopard, make sure to choose the option to do a custom install, so you can select the check box for Rosetta, or it will not install and PowerPC applications will not run. Not a huge deal if you miss. The first time you try to run a PPC application if Rosetta has not been installed, OS X offers to download and install it for you.

  Firefox works under Snow Leopard, which is the oldest version of OS X Mozilla always supports. Safari installed with SL will remain grossly outdated and should not be used.

  Nothing will happen to your documents, although I can't say with certainty that all the apps from third party that allows you to open will not be updated. They can. They cannot. For example, Office 2004 will run as long as Rosetta is installed.