Upgrading memory HP PAVILION G7 - 2118NR PORTABLE OS win 8 pro 64-bit

LAPTOP HP PAVILION G7-2118NR

I need to update my ram... is possible to update to 16-32GB? Currently, I have 8 GB of ram installed, but need more RAM...

Thanks for any help!

8 GB is the maximum. Why do you think that you need more than that?

Tags: Notebooks

Similar Questions

  • Maximum memory for Pavilion DV7t special edition running Windows 7 pro 64-bit with Intel i7 Q720

    I have an entertainment 2009 Dv7t Special Edition running on Windows 7 64 bit with intention processor i7 Q720 @1 .60GZ. I have 8 G of ram now but need to go to the top. Can I put two 8 G in the slots. Read some reviews say the software works and Windows 7 pro 64-bit can take up to 132 G RAM, if that was even possible. I run two internal drives. But with the addition of the cloud and running photoshop on cloud too much memory is used, slow down the computer. You want to go to 16. Everybody does and no problem?

    Thank you

    Hello

    As mentioned previously, there are SEVERAL dv7t editions and special editions. We have dv7t-3000, 4000-dv7t... and it is very difficult to find the right plug. Please use the following link to find the product/model number:

    http://support.HP.com/us-en/document/c00033108

    Your machine could be the following:

    http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

    If so, the #4 on the following manual page it support 16 GB max:

    http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

    You can have 2 x 8 GB, no choice. Only a few portable computers that have 4 slots and supports up to 32 GB. No way on this earth at this time, you can find a laptop that supports the 132 Gb of RAM.

    Kind regards.

  • I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure?

    * Original title: upgrade

    I want to upgrade to a newer Windows operating system Windows Vista Home Pro 64-bit. What is the recommended procedure? I see that Windows 7 or 8, a free update to Windows 10 is offered. Should I buy 7 or 8 then you spend 10 or just buy 10?

    Thank you

    Jim

    Hello

    Depends on hardware configuration required on later operating systems, and also find out if the manufacturer of the laptop computer is supported and provides drivers for operating systems later as to whether it is possible or feasible to upgrade or not.

    There is no free upgrade Vista to 7, 8.1, or 10.

    Follow these steps before you buy Windows 7.

    Microsoft sells more than 7; Try Amazon.com.

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    «Installation and reinstallation of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    @@@@@@@@@@@@@@@@@@@@@@@@

    Follow these steps before buy you and upgrade (new installation) of Windows 8.1.

    Microsoft sells more than 8/8.1.

    Try Amazon.com, etc.

    Check if the manufacturer of your computer/laptop has Windows 8.1 drivers available for your model.

    If this is not available, Windows 8.1 not install and work properly for you.

    There is a lot of information in this first link from Microsoft:

    Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

    "Update to Windows 8.1: FAQ".

    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

    "8.1 for Windows system requirements.

    http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

    @@@@@@@@@@@@@@@@@@@@@@@

    How to buy Windows 10:

    http://www.microsoftstore.com/store/msusa/en_US/cat/Windows/CategoryID.70036700

    But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

    https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

    " System requirements Windows 10"

    https://www.Thurrott.com/Windows/Windows-10/3884/Windows-10-system-requirements

    Microsoft deploys Windows 10 available as free upgrade to Windows 7 features, Windows and Windows Phone 8.1 8.1 qualified. It will be available from July 29, 2015

    "FAQ Windows 10.

    http://www.Microsoft.com/en-us/Windows/Windows-10-FAQ

    See you soon.

  • How to enable the memory full use in Win 7 Pro 64 Bit OS

    Hello.

    I have a desktop with Win 7 Pro 64 bit and its installed with 8Gigs of RAM above, but when I check in the properties of the computer it shows only 8 GM installed and 3.86 inuse.

    Can anyone suggest me how to get the memory of 8 GB in use. ?

    Concerning

    Ishaan

    Why do you need to use all of your RAM?

    Are you trying to find how to use "RAMDisk"? The link below is for one of the
    software available. A search can find a free version.

    http://memory.Dataram.com/products-and-services/software/ramdisk

    The first I've heard talk of RAMDisk was today in the thread below.

    "You not use RAMDisk?
    .

  • Upgrade memory for Pavilion 23-f213W

    The motherboard on this machine has two locations of memory, which has a module of 4 GB. The machine obviously fits 16 GB of total memory. Without replacing the existing 4 GB module, I could just add a module of 8 GB or would be - that give rise to a memory failure?

    Hello Whippit65,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more. I read your post about how you want to update your RAM, and I'd be happy to help you!

    According to the product specification of HP Pavilion TouchSmart 23 - f213w all-in-one desktop PC, you can simply add a module of 8 GB, as long as she follows these requirements memory:

    • The module is DDR3 SO-DIMM: PC3-12800 (DDR3-1600) PC3-14900 (DDR3-1866)
    • The memory does not exceed the 16 GB of RAM on 64-bit systems (that your computer is installed with).

    I hope this helps!

    Concerning

  • HP Pavilion Slimeline 400-224: upgrade memory on Pavilion Slimline 400-224

    I want to upgrade the memory of my HP pavilion slimline 400-224.  After opening the case, how do I determine how many memory locations is available?  The current Council of the memory is SK Hynix 4 G 1Rx8 PC3L 12800 S-11-13 - B4.   It seems to be another location, just underneath and take-away.

    Can you tell me if this machine has one or two slots for memory...  Any help on this would be greatly appreciated.

    Thank you

    Here are thespecifications of your machine. It allows two modules of 8 GB.  You said 4 GB installed.  Which would jive with your Visual (only 1 modules installed). If it was mine, I would opt for a corresponding module of 4 GB and do with it.

    HP PartSurfer does not list the SK Hynix 4 G 1Rx8 PC3L 12800 S-11-13 - B4.  Another curious point, the specs list 6 GB installed. It would be a 4 GB and 2 GB modules.

  • Need help with problems upgrade memory on Pavilion DM4

    I have a Pavilion DM4 1201us with original DDR3 2x2gb memory cards.

    I bought a pair of Corsair DDR3 1333 Mhz 4 GB memory cards.

    I have the latest BIOS (F.27) and I'm running the OEM Windows 7 Home Premium 64 - Bit. SP1.

    The BIOS recognizes the 8 Gb and when I run the BIOS memory test it runs without error.

    When I try to boot Win7, it gets somewhere before the logon screen and makes a BSOD with a message about a new memory being installed.

    I went back the Corsair Memory cards, but you need to know if there is a problem with any upgrade up to 8 GB of memory with my particular setup. HP offers an upgrade to 8 GB with the same spec boards. (I'm beyond the warranty period!)

    Any thoughtts?

    Interesting!

    I can tell you that the model only supports 8 GB memory: http://support.hp.com/us-en/document/c02704310

    Have you tried more than one kit of 8 GB?

    The reason why I ask is with memory DDR sometimes reticular sticks will pass all the tests if the two sticks are installed then a stick could be bad without you knowledge.

    Also you tried a bar of 4 GB and a 2 GB stick to see how it worked?

  • Upgrade memory for Pavilion dv7

    In October, I bought a Pavilion dv7 (model dv7t-7000) with 16 GB of RAM.  Is it possible to upgrade to 32 GB?  I also want to add an SSD as a second drive.  Is this possible.

    Hello

    It's a CTO machine so we can have its specifications.

    1. for the RAM, I think 16 GB is its limit as shown in the following link:

    http://www.crucial.com/upgrade/HP-memory/Pavilion+dv7+series-models.html

    2. Yes, you can use SSDS on the second span, please watch the following video:

    http://www.YouTube.com/watch?v=5kZ4irwlyEY

    Kind regards.

  • Pavilion dv7-3078nr: upgrade memory for Pavilion dv7-3078nr

    Hello! I have a portable entertainment dv7 model 3078nr number (number of product VU152UA #ABA). It has 4 GB of ram, which I had remembered as being the maximum installable. I recently upgraded to Windows (64-bit, home) to Windows 7 (same) 10 and have found that basic memory usage is higher, and he hits the high waterline much more quickly than before. (for example alert low Windows of memory, then programs disappear suddenly after.) I was surprised when adressing this notice that the model profile page lists the maximum memory 8 GB.

    So! My question is especially that after searching around for some time, unable to really find anything clear, the maximum memory I can install anything (I read on another model dv7 modules available because the documentation was written enabled 2x8gb instead of 2 x 4 GB, for example), and what my best options to acquire it.

    I tried manually by lifting my laptop on the Crucial site, but it has not been expressly listed. Their donnГ diagnostic tool using a results page with two 8 GB kits listed, but both at $239, that seems kind of evil? The listed modules were:

    8 GB (4GBx2) Kit DDR2 PC2-6400 unbuffered NON ECC 1.8V 512Meg x 64
    8 GB (4GBx2) Kit DDR2 PC2-5300 unbuffered NON ECC 1.8V 512Meg x 64

    I believe that what are already installed are 2x2gb DDR PC2-6400.

    Memory modules are used in these different workbooks and therefore rarer than those used in a configuration standard tour? I don't have memory before and would appreciate any guidance on what the options are and what specifications of the modules in order to search. Thank you for reading.

    Right! Both tl; Dr: compatible with the motherboard modules are old and rare, which makes them incredibly expensive for what they are in today's terms.

    Link to the beginning of the General memory.

  • Pavilion dv6: upgrade memory on Pavilion dv6

    I have an older dv6 which serves my needs very well.  I want to memory to the maximum that the system will allow.  I can't find a model or serial number anywhere on the computer.  Its processor is an AMD Turion II P540.  Memory current chips are 2-2 GB Hynix 2Rx8 PC3 - 10600S - 9 - 10 - F2 for 4 gigs total.

    1. What is the maximum memory that this machine will work?

    2. I find Hynix 4Rx8 PC3 - 10600 S - 9 - 10 - F2. These chips will be for an upgrade to 8 GB?

    3. is the beginning of description of module of 10600 S (above) during the choice of chips.

    Thanks for any help.

    Hello

    Please follow the instructions below to find the product/model of your machine:

      http://support.HP.com/us-en/document/c00033108

    Kind regards.

  • Upgrade memory for Pavilion g6-2239dx

    Hello

    Just bought a g6-2239dx with Windows 8 Pavilion this weekend and want to update the memory. Page product standard does not mention the speed or max memory supported, only that it has 4 GB DDR3 SDRAM (1 DIMM).

    Can someone advise me please on maximum memory supported for the g6-2239dx and how fast?

    Thank you!

    http://support.HP.com/us-en/document/c03550111

    Hello

    The maximum supported Ram is 8Gb - IE 2 x 4 GB DDR3 PC3 12800 (1600 MHz) modules.  The replacement procedure is detailed on Page 46 of your & Maintenance Guide.

    Kind regards

    DP - K

  • can I upgrade memory HP Pavilion g6-2358ee more than 8g?

    Hello

    I think to buy this laptop HP Pavilion g6-2358ee

    http://WWW8.HP.com/emea_middle_east/en/products/laptops/product-detail.html?OID=5371463#! tab = specifications

    but I want to know if I can improve the memory and graphics card in the future

    Thank you

    Here are the specifications of your laptop HP Pavilion g6-2358ee and here's HP Pavilion Notebook PC Maintenance and Service Guide of g6 for the computer. Based on these elements, this model supports a maximum of 8 GB (4 GB x 2 slots).

    Please click the White Star of KUDOS to show your appreciation

  • Repair & recover presents so I can upgrade to win xp pro 32 bit on DELL 2510 laptop__ 7__running

    Miss me some programs, the registry keys, dll files and some drivers. I can't gt the recovery of the system to work.

    11/11/2010 06:53:58

    User name:                   Prine

    Description of the process:     Microsoft Data Access - "the ODBC Administrator.

    Process name:              C:\WINDOWS\system32\odbcad32.exe

    Description of the module:       Windows XP USER Client API DLL

    Module name:               C:\WINDOWS\system32\USER32.dll

    Legend of dialogue:              ODBC Visual FoxPro error

    Dialogue text:                   You must first install the latest version of the ODBC Visual FoxPro driver. Go to http://msdn.microsoft.com/vfoxpro/downloads. Select updates and then the Visual FoxPro ODBC driver.

    to name a few

    oniebeme

    Hi Oniebeme,

    • Are you able to boot from the Windows XP desktop?
    • What exactly happens when you try to install Windows 7?
    • You have the Windows XP disk that came with the computer?
    • You get any error message running out of some programs, the registry keys, dll files and some drivers?

    Note: You cannot perform an upgrade from Windows XP to Windows 7. You must perform a custom installation of Windows 7.  You can access the link below and follow the steps in the article to install Windows 7 on the Windows XP computer.

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

    If Windows XP is not working not very well and if you need to fix before upgrading t Windows 7, you can contact Dell and check if you can restore the computer to factory settings or if they can send you Windows XP disk to repair the operating system.

    Link to contact Dell support:http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&l=en&s=gen

    I hope this helps. Let us know the result.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Acer ft200hql touch screen does not work w / HP Pavilion dv7-5000, Win 7 Pro 64-bit

    After searching for and buying touch screen FT200HQL, it does work with my HP Pavilion laptop dv7-5000, Windows 7, 64-bit.  I have the USB cable is connected (even if it says that it is optional in user's Guide - not an option if you want the touchscreen to work).  I tried it with an Acer, Gateway and an another HP Pavilion laptop (all Win 7), & it works perfectly with them, but not w / mine.  All my drivers are up to date.  (Although there is not driver site Acer for the FT200HQL for Win 7 & I don't think that what they have listed as a driver for Win 8 is a pilot).  A Microsoft Search to ensure the compatibility of the FT200HQL compatible shows and there's nothing I should do.  Help, please!  I really like the monitor & don't want to send again, but I bought it mainly for the touch screen feature.

    Hello Jo,.

    Thanks for posting your question on the Microsoft Community.

    I would like to know some information about the problem so that we can help you better.

    What version of Windows 7 is installed on your computer?

    To check the version of Windows 7 is installed on your computer, please use this link:

    Operating system Windows am I running?

    http://Windows.Microsoft.com/en-us/Windows/which-operating-system

    You can then check the hardware compatibility of the touchscreen with your laptop device.

    See this link:

    http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/home

    I suggest you to update the graphics card, and chipset drivers from the manufacturer's Web site.

    Use this link:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5051950

    I also suggest you to install the Vista driver in compatibility mode.

    Remove and reinstall this device in the Device Manager. To do this, use the following steps:

    a. right-click on the executable/program of the driver installation file, and then select the Compatibility tab.

    b. click the checkbox before you run this program in compatibility mode for option, and then select Windows Vista from the drop-down list. then try to install the device driver.

    Additional information:

    A touch screen does not work properly after that you resume a computer from sleep mode Windows 7

    http://support.Microsoft.com/kb/2405640

    Windows Touch

    http://Windows.Microsoft.com/en-us/Windows7/products/features/touch

    I hope this information helps.

    Please let us know if you need additional assistance. We will be happy to help you further.

    Thank you

  • Using Win 7 Pro 64 - bit OS SP1 w / all updates; After the upgrade to Firefox 21.0 the serch in the middle of the Mozilla Firefox Start Page field is no longer works.

    I can type in the search field. By clicking the mouse on the button search or by pressing the key 'Enter' has no effect. Search in the Firefox address bar or the search at the top of Firefox window still works browser normally. Never encountered this problem before. Have been using Firefox since it first came out.

    Try to use the extension SearchReset reset preferences to default values.

    Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

    The current versions of Firefox use the default search engine (pref: browser.search.defaultenginename) to set the search engine that is used on the subject: homepage.

    Check the browser.search.defaultenginename pref on the topic: config page and make sure that it is set to the default value of Google.

    • Browser.Search.defaultenginename

    Selected search engine:

    • browser.search.selectedEngine

Maybe you are looking for

  • 28 Firefox has changed since yesterday. I want that browser I got back yesterday

    Yesterday, I had a home button, update the button and previous and next all on my browser to the left of the address on Firefox 28 window. According to the menu of Firefox, I still have Firefox 28; but it was nothing like what I had yesterday. I want

  • Toshiba Bluetooth dongle will not mp3 to phone send

    My Toshiba bluetooth dongle will send image files to my laptop but when I try to send an mp3 file it says file sending failed every time. Can anyone help?

  • Need info on graphics card on my laptop

    I would really like to buy a set for my laptop but I don't know what capabilities it has - how can I find out what graphics card I have? Thanks for any help

  • Questions of Lenovo T420

    I got this today to run, Gopro Studio software. I5 2520 m 250ghz, 4 GHB ram windows 7 pro 32-bit. When I download from the site of the Gopro, it downloads in my downloads folder, then click to run and nothing happens, it's dead.Had an error. 80070661

  • Kaspersky sign appears after the full system restore

    After that I did a restore of the entire system on my computer, I have a sign indicating "kaspersky is not lit." What does that mean? This means that my computer came pre-installed with a free trial of kaspersky?