Questions of Lenovo T420
I got this today to run, Gopro Studio software.
I5 2520 m 250ghz, 4 GHB ram windows 7 pro 32-bit.
When I download from the site of the Gopro, it downloads in my downloads folder, then click to run and nothing happens, it's dead.
Had an error. 80070661
Any help appreciated
Think that the vantage Toolbox has stopped working also, as well as a few other things
All ideas
Concerning
Marshall
Tags: ThinkPad Notebooks
Similar Questions
-
Hi, I bought a lenovo T420s and I have a question.
Where is the 3g sim card reader?
I installed debian linux and he sees the mobile broadband device but I don't know where to put the sim card.
Thanks in advance.
Welcome, acciderboli
The SIM card is accessible by the compartment to batteries.
The details are below
https://support.Lenovo.com/us/en/documents/pd008924.. .and in the laptop the User Guide on the support site.
-
How to print screen on lenovo T420?
Hi, how to print screen on lenovo T420? I can't find the print screen key... Thank you
I don't know what is the combination of keys, but you can use the tool captures Windows 7 for a shot full-screen.
Z.
-
Lenovo T420 with Windows 7 Professional 64 bit - Windows Genuine validation failure
I have directly from Lenovo Lenovo T420 bought end of 2011 which began recently to show the message that its not running Genuine Windows. He fails to pass the validation test. He also stopped treatment of the Windows updates since December 15, 2014. All fail with the error 800706F7. I don't know if that is related to the failure of the validation. I would like to get the Windows validation problem all solved first guess that they may be related. Is attached a copy of the report full diag. Any help would be greatly appreciated.
Update: called Microsoft validation and validation of phone attempt to id software. Has been informed by the agent that the product ID has been blocked by Lenovo. Suggested I upgrade Windows, purchase a new license or call Lenovo. Release with support from Lenovo and told me that they have no way to block a product code. Suggested I try an upgrade of BIOS or reload the operating system. Have you the BIOS upgrade result has not changed. Also updated the driver Intel Rapid Storage, but again no change on the system. Read messages where that fixed similar symptoms). Latest report of diag is the same as that posted here. Operation of the system with the exception of the issue with the message on non-genuine software and updates of Windows does not not error code 800706F7. Looking for more information.
Update: 2/29/2015 KB3004394 was not as installed on this system. I ran a system scan and it shows the following missing components. There are several entries in the CBS for the latter. I have included only the first two entries in the newspaper here.
2015-02-26 14:44:51, CSI 00000031 [SR] (F) component not found error: Microsoft-Windows-Security-SPP-Client, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral [gle = 0 x 80004005]
2015-02-26 14:44:52, CSI 00000033 (F) [SR] component not found error: Microsoft-Windows-Security-SPP-Client, Version = 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral [gle = 0 x 80004005]Last update: after trying the suggested corrections that have failed, I did a complete system restore. Too bad the updated Microsoft corrupted the system. System is operating normally and is more pointed out the error of "Genuine Windows" and updates are being processed. KB3004394 is not installed.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0x8004FE21
Code of Validation caching online: 0x0
Windows product key: *-* - MV8MH - 98QJM-24367
The Windows Product Key hash: wgci5Gdejx4esg7 ++ zTOe3LWF + 4 =.
Windows product ID: 55041-OEM-8992671-00437
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {22F7EC30-3D0A-4976-8B56-DEBC5D4932EA} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.140303 - 2144
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
[File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
[File mismatch: C:\Windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100Other data-->
Office details:{22F7EC30-3D0A-4976-8B56-DEBC5D4932EA} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-24367 55041-OEM-8992671-00437 2 S-1-5-21-3472518507-4194242798-1320595179 LENOVO 4177CTO LENOVO 83ET63WW (1.33) 20110729000000.000000 + 000AE573207018400FE 0409 0409 Time(GMT-05:00) Standard is 0 3 LENOVO TP-83 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00178-926-700437-02-1033-7601.0000-0462011
Installation ID: 002863102281984756058661281352504713742266826592579230
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 24367
License status: licensed
Remaining Windows rearm count: 2
Trust time: 25/02/2015-17:53:39Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: n/a
Beyond: 0x000000000001EFF0
Event timestamp: 2:25:2015 17:28
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Altered the file: %systemroot%\system32\sppobjs.dll
Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
Altered the file: %systemroot%\system32\sppwinob.dll
Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
Altered the file: %systemroot%\system32\drivers\spsys.sys--> HWID data
Current Hash HWID: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFgK1XXbsFu6wQC1qoEIwKrPpoucw ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC LENOVO TP-83
FACP LENOVO TP-83
HPET LENOVO TP-83
MCFG LENOVO TP-83
SLIC LENOVO TP-83
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
CO-SUBMISSION LENOVO TP-83
ASF! LENOVO-TP-83
TCPA PTL LENOVO
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
UEFI LENOVO TP-83
UEFI LENOVO TP-83
UEFI LENOVO TP-83Hello
Thanks for posting your query on Microsoft Community forum.
According to the description of the problem, you can not install Windows updates and get a non-genuine mistake. As you have mentioned that this whole issue started since 15 December, so there might be a chance that some updates to move that could cause the problem.
The KB 3004394 which was dated December 10, 2014 update can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer. Thus, there could be a chance that this update is installed on your computer that is causing the problem.
According to my research and findings that I got to know only after you have installed the Microsoft KB3004394 update that was released on December 10, 2014 and Microsoft has disabled since the relevant updates. Some systems also provided a Windows is "not authentic" error caused by the same update.
So try to remove this update of the updates installed, if it is installed and hide so that it can be installed in the future of its own. You can check the link below to complete the task.
You can see the below mentioned steps to hide an update.
Click on start.
Now click on all programs.
And then click Windows Update or Microsoft Update.
Now, click on custom.
Click to clear the check box next to the update KB3004394 .
Expand the KB3004394 update you want to hide, and then click the checkbox "don't show me this update again".
Click review and install updates.
For more information please refer to the suggestion of José Antonio answered the February 10, 2012.
Additional information:
You can see the thread mentioned below for details on the error message and the resolution.
Get the error code Windows Update 800706f7
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
Lenovo T420 with multiple questions
I recently bought a T420 used for around $740 CDN - i7, 8 GB of RAM, 320 HARD drive WIN7PRO
It has several issues, but since it is still under warranty, I thought I'd take a chance and buy it.
Questions:
-defective fan (makes great plaintive sound)
-white spot (halo) on the lower left of the screen visible on white background
-the apparent defects in the bezel, the lid and palmrest
-keyboard has flex/elbows in when I type
-hinges make noises
I don't know if the repair depot will replace the damaged parts of cosmetically, but hopefully (I wrote them a nice letter asking them to replace the parts, even if it means I have to pay for them).
One thing I noticed is that it takes about a minute or two to start windows with the preloaded operating system Lenovo WIN7PRO. I don't know if a clean install of normal windows help or maybe add in an SSD. What do you think guys?
In any case, it's my story.
Well, I got my laptop back today and they fixed everything, the cracked LCD bezel, bezel palmrest, replaced the hinges and the LCD screen. One thing they have not replaced was the cover that had the apparent defects in the words "lenovo." I had to order a new lid of China and install it as soon as it comes.
-
Lenovo T420 3.2.002 Solution Center does not display tile system
Hello
I have a T420 running Windows 10 with CSL 3.2.002 injstalled. The Solution Center does not show the System tab, and so I can't do anything with it. Any suggestions?
Yes,
Lenovo came out with updates and the latest version of the Solution Center (3.0.0.3 from the website) and 3.0.0.4 upgrade all issues resolved.
Hope this helps.
See you soon,.
-
Change of Lenovo t420 video card
Hello, I want to know if it is possible to add to a lenovo with intel Hd 3000 integrated card t420 a dedicated nvidia card, as nvs3100m which is the one that has best t420, ore better.
Thank you
This would require a new motherboard and the new heatsink / fan
-
How to set up two monitors on Lenovo T420 with docking station.
I have a T420 on a docking station (cradle ThinkPad series 3, #4333710U)- and two monitors (each aprox 24 "). I tried several variations using the NVIDIA display as well as the native Windows Display Manager (7) and am unable to render images on the two external displays. Can someone please help?
Hi John,.
Thanks for posting your question on the Forum of the Microsoft community.
I would be grateful if you can provide us with the following information to determine the root cause of the problem.
Did you do last changes made on your computer before this problem?
Have you tried to monitor primary as secondary and vice versa?
All device drivers are updated?
After reading your post, I understand that you want to use two monitors with extended view, then you can try the steps in the following Microsoft article and see if it helps.
Move windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7
If the problem persists, then pass to the below mentioned method and see if it helps.
Method 1
If you haven't tried Exchange monitors so I suggest you to try and see if the problem still occurs.
To change the settings of two monitors you can consult the links below:
Guided Help: Setup dual monitor is easy in Windows 7!
http://support.Microsoft.com/kb/976064/en-us
Change settings display on multiple monitors
http://Windows.Microsoft.com/en-us/Windows-Vista/change-display-settings-on-multiple-monitors
Note: This link is also applicable for Windows 7 .
Method 2
If the problem persists I suggest you to update the display drivers. As the display drivers for two monitors are not the same, so try to update and check the status.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyUpdate drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
You can also try to update the drivers from the manufacturer's website.
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
Computer laptop Lenovo (T420) fails Hibernate.
Hello
The laptop computer Lenovo I running an edition 64-bit of Windows 7 SP1 Ent edition and for some reason I can't it hibernates.
When I try to it hibernates, it seems as it passes to the State of hibernation, but when I turn it back, he starts fresh.
I tried to update the BIOS and all device drivers.
What I suspect is that when starting to return, it is not picking up the entry in the BCD for hibernation state and making rather a new beginning.
Any help welcome and thank you in advance.
PS: It's an office job / portable and is part of a domain, and it was an image installation that has been done rather than installing from a DVD. I used to have a Dell with the same OS and it used to Hibernate and so I know with certainty that there is no GP who is disable hibernation.
Changappa.
Hi Changappa,
Thanks for posting your query in the Microsoft Community Forums.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
Well is the Lenovo Z50-70 for programming?
Hi Raff7m,
Welcome to Lenovo Community!
According to the request, we understand that you are eager to buy laptop Lenovo Z50-70.
As you mentioned that you are looking to install java in your system is the minimum system requirements for hardware, at least 124 MB of HARD drive and 512 MB RAM. For more details please see linked below.
Click here for more of the specification.
Looking to buy a laptop Lenovo Z50-70 so this system should support the hardware requirement.
I hope this helps. Post back if the problem persists!
Best regards
Ashwin.S
-
PROBLEM/QUESTIONS of Lenovo TAB A7 - 30 (A3300-HV) touchscreen
Hi, I recently got a TAB Lenovo A7-30 as a gift. It came in a box delivered with Earbud Headphones JBL and a sleeve of Samsonite. I've updated immediately after loading, and as I used it, I noticed erratic behavior of the touch screen:
1. registered "touch a ghost" (especially when using the keyboard, i.e. entered letters diff.)
2. Long press enter (ex using the keyboard, the letter T gets long for 3 seconds and turns into a 5)
3. There are dead zones (touch won't register). Especially near the edges of the screen
4. some entries will not register. (Duty press I.e. period key on the keyboard)
5. the parts of the screen has suddenly fails to register entries.Is it a hardware problem or a software problem? Can what steps I take to solve it? Please address/solve this problem. Thank you.
I did:
A factory reset. (UNSOLVED)More details:
CPU: MTK 8382 QC 1.3 GHz
Display: 7.0 1024 X 600 LED GLARE
System memory: 1 GB RAM
Storage capacity: 8 GB PMCEModel: Lenovo A3300-HV
Build number: A3300HV_A442_01_22_141030_ROW
Kernel version: 3.4.67
Hardware Version: A3300HV_MB_V6.0
Android version: 4.4.2
Baseband version: A3300HV. V34, 08/2014/15-19:00
-
Hey,.
I just got my Y570 yesterday and I'm in love!
All though I wonder why my boot time is 01:46 seconds. I think he should deal with the bloat ware. Can someone give me a list of bloatware which is safe to remove and useless?
@ Velenoso666
On the onekeytheatre, it is this button next to the one with which you control the «fan speed» mode Slightly, it changes the contrast of the colors and uses a different model of sounds. It's more noticeable if you have headphones and watching a movie... Otherwise, it is pretty useless.
@ Ksteven
You should try the technique described by memoirs, or you could try the optimizer to start EA, provided by lenovo. Although people on the forum have said that it works perfectly for them. Use to start and that you have not, you will see in a few days that you programs. I use lenovo especially programs if I have almost all of them uninstalled and I don't have a lot of things on my laptop and I have the time to defragment my disk once a week, so I keep my boot time to 30-40 seconds without lenovo boot optimizer.
-
I checked the specification of Lenovo S410p and it show no http://shopap.lenovo.com/my/en/laptops/ideapad/s-series/s410p/#tab-view_models Lan means does not support Wi - Fi or what?
It is not wrong. the system is not lan (cable) connection.
but it has wlan (WiFi). -
Lenovo T420 Bluetooth does not work
The Bluetooth on my T420 done nothing at all. I have several Bluetooth devices that can locate and connect to each other, but nothing is found by the mobile phone. I can't even open the Bluetooth settings. When I go to the bar at the bottom right, do a right-click on Bluetooth, and then select settings the mouse icon displays the circle of work briefly, then disappears without anything happening.
I realize that it's now an old thread, but just, I solved this problem. Here is the help I found:
The problem was that the Bluetooth support Service has been disabled. Thanks for the given suggestion and I hope this can help someone else in the future.
-
Hi, I decided to buy the laptop and I stopped for Lenovo 3000 N200 0769AN7. But when I searched in the Lenovo site, I couldn't find which seemed strange to me. D...
This laptop model has been supersided for some time if I remember correctly, you can always find second hand version which in online shops.
Maybe you are looking for
-
Passwords disappear after the upgrade.
According to the title. None of the solutions on this forum has worked for me. Change the folder to logins.json after upgrading to the latest ff wipe my list of password completely. Only downgrade v 31 or less restores the passwords... If anyone can
-
Can someone help me please. I have a HP Deskjet 1050 All in one J410 series model No.VCVRA 1001 I use on my laptop Compaq Windows7 64 bit. For the first time yesterday, when I tried to print on the machine, all I get is a pop up that says there is a
-
BlackBerry Smartphones Sec Update Aug 5th still not arrived
Many PRIVATE users is still waiting for August 5 Sec updated to arrive 3 days after the defined Google "patch level date." Any info on this? It is the massive implementation of DTEK50 that return users PRIVATE bundles in the queue or is it a real pro
-
Need drivers for Pavilion 17Z-e100 - network and usb Win7
I need drivers to support Win7 on Pavilion 17Z-e100. Ethernet controller, network, PCI Devie, SM Bus controller, & usb controller.
-
Does not work? Pleas advise Run the following on the SRI 4331. ntmhomes #configurer tEnter configuration commands, one per line. End with CNTL/Z.ntmhomes (config) #service timestamps log datetime localtimentmhomes (config) #.ntmhomes (config) #.ntmh