Upgrading motherboard and CPU, can I keep the case?

Similar Questions

• I use Lr5 on a PC, working on the Nikon RAW files. Without even touching the images, they lose their shine after a few seconds. Why and how can I keep the liveliness to the origin?

  I use Lr5 on a PC, working on the Nikon RAW files. Without even touching the images, they lose their shine after a few seconds. Why and how can I keep the liveliness to the origin?

  Step 1: Adjust an image in Lightroom, until you are satisfied with its appearance

  Step 2: Use develop-> new preset, select all selections in the new preset dialog box (note: I always uncheck the exhibition here, who should probably be adjusted picture, I'm mostly interested by contrast, vibrance and camera calibration settings)

  Step 3: In the import dialog box, on the right, under appliquer apply when importing, select the preset desired beside development parameters

• I changed my motherboard and processor - can't call the automated phone system

  I changed my motherboard from Gigabyte, MSI and my processor from Intel, AMD (reason - a motherboard issue prevented my hard drive to boot) and since I called the automated phone system. But it says "sorry, your call cannot be completed this time. "Please try again later". and every time I call it is the same thing.

  What should I do?

  Hi KhodabucusMuhamad Muzahir,

  Thank you for keeping us posted.

  Ideally, you can contact the Department of Activation by using the phone number of the command prompt.

  Since you have already tried to contact them and are unable to reach, try it.

  Phone numbers Global Service customer for assistance. They will be able to guide you on that accordingly.

  Find the link here:

  http://support.microsoft.com/gp/customer-service-phone-numbers/en-us?

  Hope the information is useful.

• Vista will have to reinstall if the upgrade card motherboard and CPU?

  So I'm wanting to upgrade my computer and I can't find a clear answer, if when I install a new one, a motherboard and CPU, but with the same RAM and the hard drive and the motherboard did not fail, I need a new installation of windows?

  So I'm wanting to upgrade my computer and I can't find a clear answer, if when I install a new one, a motherboard and CPU, but with the same RAM and the hard drive and the motherboard did not fail, I need a new installation of windows?

  Hé Fatah

  If vista came preinatalled your computer, it is rated an oem license as such is related to the material that it is initially installed on

  If you have a retail license, you can upgrade your card motherboard and CPU

  you will probably have to reinstall vista while the hard drive with the existing vista installation contains the drivers for the old motherboard and probably do not start correctly

  Walter, the time zone traveller

• I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  I'm trying to upgrade a site from Muse and it keeps telling me that the site has been created with a different version of Muse. I have updated Muse and still can not access the site to make changes.

  Hi rgarden95,

  Can you please confirm the exact version of Muse, you open the file with?

  To check the version of Muse, please click Help-> on Adobe Muse CC.

  Kind regards

  Akshay

• How can I keep the dock and menu bar in the window

  How can I keep the dock and menu bar in the window

  First of all, go to System Preferences and select general:

  

  Under the dark menu and dock option, uncheck "hide and show the menu bar automatically".

  Go back and select Dock Prefs system:

  

  Make sure that "automatically hide / show the dock" is not checked.

• I accidentally hit the button to upgrade outlook and I can't understand how to remove it.

  Original title: HELP

  I accidentally hit the button to upgrade outlook and I can't understand how to remove...

  I accidentally hit the button to upgrade outlook and I can't understand how to remove...

  You mean you use Hotmail, Messenger MSN or Windows Live mail via a web browser (Internet Explorer, Firefox, Chrome, etc.) and you have decided to try to "Outlook.com" (i.e. a product different from Outlook Express, Outlook 97, 98, 2000, 2002/XP, 2003, 2007, 2010 or 2013) and you do not like the look of it and the look and feel classic back?

  1. Click the "gear" settings in the upper right, near where your name appears
  2. Click on "return to Hotmail.

  For more information on Outlook.com consult this article:
  Update of Hotmail for Outlook.com
   
  Photo of what you do:
   
   
  If this isn't what you mean, please come back and clarify now that you know more information about what may assume people in light of what you have so far.

• Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place

  Original title: blocking or scrolling

  Generally when I go in windows or by mail, the computer will pick up, and then when it opens, I can't keep the page at a particular place. It scrolls upwards or downwards, when I try to open a place to file an open letter from mail, or trying to do some work. Please notify.

  Hello

  1 how long have you been faced with this problem?
  2 don't you make changes on the computer before this problem?
  3 what e-mail client or browser you use?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, viruses or malware scan and check.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true
  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true
  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• I had a fast PC program that keeps coming up as an error and I can not find the program on my PC?

  There is a Speedy PC Pro porgram on my computer keeps coming back as an error and I can not find the program or software

  any where on my computer to uninstall or remove. I don't know where it comes from. Please notify.

  If the "program not found" error message is associated with the Windows startup, another solution is to use the System Configuration tool and remove applications from the startup list.

  Here are the steps on how to do this:

  1. Move the cursor to the Start menu and then click on "Run".
  2. In the Open box, type msconfig
  3. Heat the Enter key
  4. Click the Startup tab
  5. Remove/disable all uninstalled applications in the startup list
  6. Move the cursor to the Start menu and then click on 'stop'. After that click on 'restart'.

• I recently downloaded the Lightroom upgrade but the old version remains the default Lightroom Application on my laptop and I can only access the new version through the Adobe icon at the top of ch. How can I get the new version of "AMPERAGE".

  I recently downloaded the Lightroom upgrade but the old version remains the default Lightroom Application on my laptop and I can only access the new version through the Adobe icon at the top of the screen. How can I get the new version of 'replace' the old?

  Try to uninstall the old version - it is not necessary.  An upgrade is a product independent and fully functional.

• I transferred my Lightroom 5.7.1 my cell phone to my PC. I put in the serial number, you press "next" and another box came up saying that the updated code was for and upgraded version and I should put in the old version the serial number - this I can't f

  I transferred my Lightroom 5.7.1 my cell phone to my PC. I put in the serial number, you press "next" and another box came up saying that the updated code was for and upgraded version and I should put in the old version the serial number - this that I can't find

  you will need to this previous version number and serial number.

  If you purchased the previous version of adobe or registered with adobe, check your account: ID Adobe

  in otherwise, find the serial number of your product Adobe quickly

• In PSE12, how can I save legends when I export pictures on a CD?  And how can I keep it in the order appropriate instead of becoming all jumbled up?

  I have PSE12 and when I export pictures on a CD, the legends disappear.  How can I keep my captions on the pictures?  Also, how can I keep the photos in the order I want them instead of getting all mixed together?

  Thanks for any help you can give.

  I suggest that you post your request in the Forum elements.

  https://forums.Adobe.com/community/photoshop_elements/content

• I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

  I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

  Mac OS 10.8.5

  
  None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

  I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

  You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

  1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

  2. close DWCS4 and open DWCS6

  3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

  This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.

• Once I have to zoom on video in post production using the effects Panel and movement controls > scale how can I keep the sharpness of the image?

  How can I keep the sharpness after I Zoom.

  Never exceed 100% scale.  The image is going to deteriorate.

• New motherboard and CPU... Running slow

  The back story:

  First let me preface this by saying: "I don't know much about computers.  OK, with that of the road, I have a Presario SR1703WM under XP. I added two gigs of memory a couple of years and it was running fine for what I needed.

  About a year or two back... It got to where I could not close without waiting a long time to get it to even start upward. I was told that the phones went wrong. Anyway... the food has recently taken a dive.  I replaced it, but the computer had apparently had inhaled, it is the last and sang with the choir invisible.

  I decided to fix it myself and in the process, destroyed the CPU... He looked like a little in the wake of a 747 crashing in a field of culture.

  A friend IT just happened to have a new motherboard and CPU which it replaces for me (God have mercy on its processor)

  The Situation as it is:

  The computer came back from the dead, but he is running a bit slow sometimes.  It is not constant. It seems to happen on Yahoo mail and when I watch Youtube videos or when there is a site with a kind of animation advertisemens.  Yahoo email who has a little.  PC Doctor 5 for windows came with the original computer, but now she says that she is not allowed now... not really a problem, but running a dignostic there will not happen. Compaq diagnostics is not upward in case of problem either. The slowness is erratic, even in the same session.  It can correct itself and return to normal. It seems to happen when I have more than one high screen... like if I can access Yahoo email on one screen and I do appear Facebook on another at the same time.

  Memory is adequate

  Controls for Device Manager shows all my drivers are up to date.

  The new motherboard is an Elitegroup P4M800PRO-M he came with an instellation CD

  The new processor is an Intel Pentium 4.  (He had an AMD Sempron before hand).

  Please be patient with me and use it as simple as possible when replying with advice... I do not understand a lot of technical terms... but I'm learning.

  After hours of slope on this problem... It seems that the culprits were Yahoo toolbar and Adobe Flash 9.  At least it works a lot better now. We'll see if it continues to do so.  Thanks to everyone who took the time to help.  I appreciate it.  Kudos to you all.