Upgrading Oracle 11 g in Oracle Application Server 10 g application server?

Similar Questions

• How to export a .sql file, I created from Oracle Application Express of SQL Server Management 2012?

  Hello

  I was wondering if you could help me.

  I'm trying to find out how to export a .sql file, I created from Oracle Application Express of SQL Server Management 2012? I'm not very technical, but it seems that the Oracle code does not work with SQL Management Studio when I drag the file inside.

  I need the database Oracle express and its data to enter in SQL Management Studio, so any help would be much appreciated!

  Thank you.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• Setting up Oracle Application Testing Suite components Server 12.5.0.2.537 takes a long time.

  I am trying to install Oracle Application Testing Suite. It has installed successfully,

  but ' implementation of Oracle Application Testing Suite components Server 12.5.0.2.537 ' takes a long time.

  It is showing the message "set up pending".

  It's also show message 'spawning' C\OracleATS\bin\deploy.bat C\OracleATS\install\oats.ear".

  Progress of the installation is stuck at 99% of last four hours.

  Any idea on this?

  Thanks in advance.

  Dear Nilesh,

  Please try reinstalling with admin privileges.

  Click with the right button on setup.bat and run as Administrator.

  
  

  Please note uninstallation is not necessary.

  Thank you best regards &,.

  Susanto Paul

• Oracle Application Server 10g R3 with patch set 10.1.3.5.0

  Hi all

  Can someone help me on this point, when I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I'm not able to find the container forms and reports.

  This version does not support forms and the States or I go what OAS 10 g R2 (10.1.2.0.2) with the patch set 3 (10.1.2.3.0). What is the difference between these two versions.

  Please help me.

  Kind regards

  Hi James,

  First of all forms and reports are only available in OAS 10 g 2 (10.1.2.0.2) and you would go to the latest version in gr 10, 2 which is 10.1.2.3.

  The Oracle Application Server 10 g 3 version is a limited edition and SOA and OC4J components.

  So if you need to forms and reports, you must make 10 gr 2 OAS.

  Kind regards

  Prakash.

• Huge success in Oracle HTTP Server for Application Apex

  Hello

  
  

  I've been running several applications in the same database in Apex 4.2.2. I use Oracle HTTP Server 10.2 for web access to customers. I have 4000 users in systems, but at the same time can be logged 500. Server Web is in DMZ, and database server's internal network. We notice that we conduct page huge hit in the system, very high. I noticed a client IP had 44 000 visits in one day and on a daily basis any number of access is 500 000 to 600 000. That is for me, it's huge. This huge success makes the firewall close the connection to the web server. This disturbance is causing the company a lot.

  
  

  I would like to know how Oracle Apex communicates with the web server and clients, is the mechanism of Oracle Apex which causes this huge success or is it for external cause, such as a DoS attack or something like that. I'm really exhausted with it. Don't know what to do. Help, please

  
  

  
  

  Hasan Al Mamun

  Hi I have kind of a resolved / by past the problem. Now, I have no connection to the bottom of the problem. The problem was. Subdomain (say myapp.testlab.com) of my app had a single IP address, router treated the huge success of the same IP address as a threat and that's why router blocked the real IP of this subdomain. We did it, we asked our dns provider to add a few more (5) IPs for the same subdomain. Now, as dns selects a single IP among 5 fps in alternating single IP does not get as much success as to be blocked by the router. It works better now. Cordially Hasan Al Mamun

• When I start to Oracle Application server apps I got below error mention with the log file

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adalnctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  adalnctl.sh version 120.3

  Check executable FNDFS.

  From listening APPS_VIS process.

  adalnctl.sh: exit with status 0

  adalnctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adalnctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adapcctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  You are running version 120.7.12010000.2 adapcctl.sh

  From OPMN managed instance Oracle HTTP Server (OHS)...

  adapcctl.sh: exit with status 0

  adapcctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adapcctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adoacorectl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  ERROR: Timed out (100000): Exception interrupted

  You are running version 120.13 adoacorectl.sh

  From OPMN managed OC4J instance OACORE...

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adformsctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  You are running version 120,16 adformsctl.sh

  From successful OPMN FORMS OC4J instance...

  adformsctl.sh: exit with status 0

  adformsctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adformsctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adoafmctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  You are running version 120,8 adoafmctl.sh

  From OPMN managed Association OC4J instance...

  adoafmctl.sh: exit with status 0

  adoafmctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adoafmctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/adcmctl.sh start

  Timeout specified in the context file: 1000 second (s)

  script gave:

  ****************************************************

  You are running version 120.17.12010000.3 adcmctl.sh

  Starting at the same time responsible for LIVE...

  Departure VIS_1202@VIS internal competitor Manager

  Default printer is noprint

  adcmctl.sh: exit with status 0

  adcmctl.sh: check the logfile /u01/appstier/VIS/inst/apps/VIS_prod/logs/appl/admin/log/adcmctl.txt for more information...

  .end std out.

  .end err out.

  ****************************************************

  Service control script execution:

  /U01/appstier/vis/inst/apps/VIS_prod/Admin/scripts/jtffmctl.sh start

  Timeout specified in the context file: 100 second (s)

  script gave:

  ****************************************************

  You are running version 120.3 jtffmctl.sh

  Validate the patch level of achievement by/u01/appstier/SCREWS/apps/apps_st/comn/java/classes

  Valid fix Fulfillment level.

  From realization for SCREWS on port 9300 server...

  jtffmctl.sh: exit with status 0

  .end std out.

  .end err out.

  ****************************************************

  [Service Control implementation report]

  The format of the report is:

  < group Service > < Service > < Script > < status >

  Root active Service

  Root Service Oracle Process Manager for VIS_prod adopmnctl.sh Started

  Entry Point active Web services

  Entry point Web Services Oracle HTTP Server VIS_prod adapcctl.sh Started

  Web Entry Point Services OracleTNSListenerAPPS_VIS_prod adalnctl.sh Started

  Application Web enabled services

  Web Application Services OACORE OC4J Instance VIS_prod adoacorectl.sh Failed

  Web Services FORMS OC4J Instance VIS_prod adformsctl.sh Started

  Web Application Services Association OC4J Instance VIS_prod adoafmctl.sh Started

  Services enabled processing batch

  Batch Processing Services OracleConcMgrVIS_prod adcmctl.sh Started

  Batch Processing Services Oracle Fulfillment Server VIS_prod jtffmctl.sh Started

  Other disabled Services

  Other Services OracleFormsServer - forms VIS_prod adformsrvctl.sh disabled

  Other Oracle Metrics customer VIS_prod adfmcctl.sh people with disabilities Services

  Other Oracle Metrics Server VIS_prod adfmsctl.sh people with disabilities Services

  Other Oracle MWA Service VIS_prod mwactlwrpr.sh people with disabilities Services

  ServiceControl dating status 1

  ============END OF LOG FILE=======================================

  Here are the results of some queries:

  The query result

  Select the status from v$ instance;

  STATUS

  OPEN

  Select INSTANCE_NAME from v$ instance;

  INSTANCE_NAME

  SCREW

  If you have changed the IP address, then you must purge FND_NODES, then run AutoConfig on the node of the database layer and the application layer node to populate the table. Once the correct entries exist in the FND_NODES table, and then you can start services and check - assuming that the IP address was successfully changed at the level of the BONE.

  Thank you

  Hussein

• How to deploy on Oracle Application Server OC4J

  I installed on my pc to OBIEE. I select OC4j as an application server. Now, I want to change on Oracle Application Server OC4J.

  
  

  Any ideas?
  

  You must deploy analytics. Ear to the presentation server

  Check if helps.

  Thank you

• Installing Oracle Application Server 10g 10.1.2.0.2 on RHEL 5.3

  Dear all,
  
  My version of Linux is RedHat 5.3
  
  I want to install oracle 10g Application Server on this subject please help me to do.
  
  Please help me, thanks in advance.
  
  Please provide me with the link to the documentation for installing Oracle Application Server 10 g 10.1.2.0.2 on RHEL5.3
  
  Thanks and greetings
  Yvon Das

  install Oracle Application Server 10 g 10.1.2.0.2 on RHEL5.3

  Said that the OAS 10.1.2.0.2 is desupported, you must apply the patch 10.1. 2.3 to be fully certified on RHEL/OEL 5.

  See MOS doc. ID 564174.1 Oracle Application Server 10 g (10.1.2) Installation Requirements for Linux OEL 5 and RHEL 5

• Oracle Weblogic server and Oracle Application Server

  The Bea weblogic and Oracle application server have been combined in a product-viz Oracle Weblogic server.
  
  Please clarify - because Oracle Application Server is always available as a separate offering
  
  
  Thank you

  Yes, since version 10.3.4 the product called Weblogic Server provides the two "BEA WLS' and 'Oracle AS' characteristics (namely, support for forms and reports, ADF, etc..)

  Existing customers of Oracle ACEs can move to Weblogic Server to get its benefits (for example, JRockIt JVM). For the new Oracle AS it is no longer available.

  BTW. This is not a good forum for this kind of questions. You must use these: https://forums.oracle.com/forums/category.jspa?categoryID=193

• How to check if the discoverer is installed in the oracle application server?

  Hello
  
  I'm a developer, and I had an obligation to prepare a few reports of discoverer.
  
  However, I am new to Discoverer and as a result, I am facing problems during indexing of discoverer as Oracle Applications users.
  
  When I give the credentials, it asks me to choose a responsibility, and then he throws me error like "invalid username/password".
  
  applied patches according to metalink notes.
  
  but before that, I would like to know if I can really see whether or not the discoverer has been installed on the server of Oracle Applications.
  
  As my DBA also ignorant of the installation of discoverer, he also could not help me in this.
  
  How can we check if the discoverer has been installed on the server side and if not, how do install us it?
  
  Sorry for the stupid question.

  Hello

  The owner EUL is APPS and I might be able to connect to the Admin with this database user.

  I think you have an installation of database in mode EUL. You may not use APPS as the owner of the END user license. Therefore, you need to create a new mode of EUL requests in a separate schema.

  Is it possible that we can connect to Disco Admin/Desktop tool as a user of the database even though Disco is not installed on the server of Oracle Applications

  Yes, no problem. You only need server discoverer of applications if you want to use more or spectator.

  Rod West

• Difference between oracle and Oracle Application Server Developer's costume?

  Hi all
  
  If someone please tell me the main difference between the costume of developer and Oracle Application Server.
  
  I will be very thank ful.
  
  Thank you
  
  Hina.

  You would need an application to host the application, but each user could access this application using a browser. So the obligation for each user is simply a browser with an appropriate Sun JRE installed - this JRE (if not already installed) can be configured to be automatically downloaded and installed on the client from the application server.

• Newbie question for the Oracle application server

  Hi Master,
  a DBA I am interesting to broaden my skill with learning on the application server.
  I knew that in the past before Weblogic bought by Oracle, Oracle, always using Oracle application server.
  Now with the Weblogic gaining more popularity on the market, which is the product the value of learning and get certified.
  
  Is it still useful to take Application Server 10 g or go with Weblogic. in certification path, Weblogic 10 g.
  WebLogic now replaces the Oracle application server, average abandoned Oracle Application Server?
  
  Please enlighten me and thank you for your help
  
  Lie

  Question if I go for Oracle WebLogic Server 10 g Administrator Certified Expert System it will be good to work with 11g thus?

  Make it part of the same system (now). Like WebLogic is the portal and the Jukebox, forms etc. are the records.

  What book other than the documentation that you have found the right one for learning.

  Yet to find one, Oracle documentation was OK.

  Is it better to learn the Linux or Windows version?

  Both are very well, choose the operating system you know better.

  Best regards

  mseberg

  I built my Middleware on Linux 64-bit test. Note that the 32-bit version allows to run Forms and Reports Developer.

  Beware of pre-installation tasks

  Install the Oracle database
  Linux RCU (repository creation utility)

  Database

  Use an existing database. (And it worked)

  My test was divided into four main parts: (in this order)

  Installation of the regional coordination unit
  WebLogic Server Install
  Install JRocket
  Forms and reports Install

  According to me, it took me two or three times to do things. (or at least work)

  I found myself with these URLs in the end:

  Administration Server Console http://Host/console 7001
  Enterprise Manager Console http://Host/em 7002
  Enterprise Manager Agent http://Host/emd/main
  Oracle Forms http://Host/formes/frmservlet 9001
  Oracle reports http://Host/rapports/rwservlet 9002

  So far, I have only an addition to my Web Page:

  http://www.Visi.com/~mseberg/compile_forms_on_wl.html

  As always this work orders:

  ./opmnctl status
  

  I was able to add PHP after you apply the hotfix 9292625.

  Note of Oracle that I found useful

  854117.1

  Published by: mseberg on May 20, 2011 14:16

• Number of users of Oracle Application Server

  Hello
  How to set the value of number of Oracle Application Server users.

  Hello
  Yes, the httpd.conf file will help there, location ORACLE_HOME/Apache/Apache/conf
  its better to make a backup of the original file and then make specific changes
  There are various settings in the file httpd.conf as follows

  Timeout: the number of seconds before receives and sends time out.

  KeepAlive: whether persistent connections (more than one request per connection). "Off" position to turn off.

  MaxKeepAliveRequests: the maximum number of queries during a persistent connection. Set to 0 to allow unlimited. We recommend that you leave this number high, for maximum performance.

  for example: MaxKeepAliveRequests 100

  KeepAliveTimeout: Number of seconds to wait for the next request from the
  same client on the same connection.

  For more information about the httpd.conf file, see the link below
  http://livenudefrogs.com/~Anubis/Apache/httpd-conf.shtml

  Concerning
  Fabian

• WebLogic and Oracle Application Server

  Probably a stupid question, but what is the difference between WebLogic and Oracle Application Server or are they the same thing?

  Hello

  Please find below the link... It can erase some of your doubts: -.

  http://orachat.com/Oracle-application-server-Oracle-WebLogic-Server/

  Thank you
  JD

• Deploy a war in the Oracle application server

  Hello
  
  We have a few Oracle discoverer running on the oracle application server and I would like to deploy a war to the service file.
  Can someone tell me if its possible to do?
  Should I just drop the war in the deployment of the server folder?
  
  Thank you
  KK

  Wrong forum.

  Move the thread (close and re-post) to each of discoverer
  or somewhere in http://forums.oracle.com/forums/category.jspa?categoryID=193 (probably Oracle ACE - general forum).