UPS tracking?

Similar Questions

• IMAQdx nidaq

  Hello

  I am a newbie of LV, your patience is appreciated

  I posted in the Councils of labview, but because I work a lot with imaqdx I thought I should post here also.

  I work with a gigabit Prosilica GE 680 camera connected to my computer via Intel PRO 1000 G/T and I also work with a M NI USB 6212 BNC series. Connected to the nor-daq is a source of light on each of the AnalogOut0 and AnalogOut1, as well as 3 analog: read analog two of the three outputs, the other entrance is a signal of the camera by saying that it is imaging or not.

  I was debugging the code from someone who is no longer around to help. The code basically allows the user to synchronize two things: 1) capture and recording of a number of specified length avi, which in my hands, is typically movies of 2 sec to 200 images per second AND 2) to turn off the two sources of light at times during the movie and specified. The problem is in the precise timing of the light sources with the camera exposure period.

  From now the lights turn on and off in my movies, which is good. The problem is that the camera lights late compared to the signal of departure as evidenced by the output signal "imaging" sent by the camera in one of the analog inputs. The result is that the lights seem to lights at the beginning of the avi saved since the movie begins later that it is specified. It's not ideal.

  What changes should I make to the labview code to make sure that the camera is precisely synchronized with the analog?

  Thanks and let me know what information you need from me.

  -Alex

  Hello again,

  I solved the problem. It was a hardware problem. Using SyncOut2 instead of SyncOut1 on my camera Prosilica 680 GE gave me the schedule that I specify. No major code changes was necessary, other than changes to support the change of equipment.

  The question remains as to why works SyncOut2 and SyncOut1 does not. After consulting the technical manual for the camera, I realized that the use of SyncOut1 requires that I use the ground isolated on 12 IO pins my camera. Although I am a novice to the electronics, it seems to me that this would require a line that goes from the isolated ground my mass of the external circuit DAQ. I didn't get it, even if I did when I tried SyncOut2. This missing connection can have an impact on power SyncOut1 send a trigger to the acquisition of data.

  The reason why I started with SyncOut1 that is an SMB connection to BNC, which seemed to be a convenient way to get the camera to trigger the acquisition of data. Yes, I was lazy. If it turns out that I still need to connect an isoground on the 12pin to the DAQ extground convenience then disappears.

  I understood what the analog input wavegraphs look like now that the timing is good.

  Two additional questions that I have for those of you who have followed this thread. I supplied the information that could have led to this solution? I'm missing something in my introduction and ups tracking?

  Despite the outstanding issues I will mark this as resolved issue. Kudos to Bruce for helping me to think about it.

• Say-happy with the customer service

  I booked my Acer laptop for a repair under warranty an August 26, 2013
  After 10 days, I called for an update of repair only to tell that my cell phone was not in the repair center, I called.
  who confirmed the delivery of acer on 27 August. I called acer back and was invited to "give it 2 days.
  (climbing the case) I did.
  After 2 days, I called the center of repair again and told me that I would have my laptop within 7 days, after 10 days
  I always have my laptop and decided to call the repair enter this time told me again that ups
  did not deliver my computer acer laptop even once, someone at Acer decided to call ups again only to be told
  that they had indeed handed over to acer for repair, I then spoke to a manager of acer who asked me to give
  the other 2 days to climb the repair business, 3 weeks has passed and I have not yet received my laptop,
  I am very dissatisfied with the level of service I have received to date, it is the third time that I return to this portable ith the same failure
  The acer repair center has certainly received my laptop
  (I have the UPS tracking number)
  I would have someone Acer would contact me to help resolve this issue.

  Lol... not the shipping costs is certainly free to the United Kingdom, the repair center is only about 400 miles in England, is your repair center in the United States? With regard to the getaway of Delhi? I felt like for him to step out and take a tourist so I could understand what was said...

• I need help, check the status of a return

  Hello! If I could help, it would be great. I ordered a computer in March. Due to some problems with it, I flipped with the help of a Customer Service return label. According to UPS tracking, Dell received on 29 March. However, I have received no confirmation by e-mail or notifications of any kind, nor a restitution appeared. It was difficult to get concrete information about the status of my refund. Any chance that someone could help me? I can provide the relevant information in a PM.

  Thank you!

  Hi Oak16,

  Thanks for posting your request on the Dell Community Forum Office client for protection. I can help you with the status of the return order.

  Please respond to my e-mail and provide the requested information so that I can access your records into account.

  Thank you
  Lorna

• Question about Bberry protect

  Hello

  I installed the application Protect, which has the following features:

  -Ups support via the web or wi - fi

  -Can map your device via GPS if lost/stolen

  -Can be banded remotely if lost in the House.

  Then... I thought to take advantage of these features, I was able to connect on a Web site, to recover back ups, tracking device on the card, device ringtone to distance, etc... But, once I installed the app, nothing tells me where to find these services remotely on the Web site. I looked on the page web, the messages app on my device once the application is installed and also did a search on Google and nothing leads me to believe that there is a site that would allow me to take advantage of these features remotely.

  Is this means that this function must be accessible through another blackberry only? Which means that if I want to find my device via GPS, I can't use an another bberry which has this request?

  Thanks for the information.

  See you soon.

  Sign in using your BlackBerryID account to this url from a PC:

  https://blackberryid.BlackBerry.com/bbid/login/?callbackuri=aHR0cHM6Ly9wcm90ZWN0LmJsYWNrYmVycnkuY29t...

• Replacements "BOLD" 9 in the year blackBerry Smartphones

  I received my first "BOLD", shortly after she was released in September 2008.
  From then and until December 2008, I lived 5 replacement due to physical problems such as track ball chess, the dead screen pixels, misaligned keys etc.
  In December 2008, I finally received a unit that worked well until October 2009. Then he ceased to receive the WiFi; wouldn't connect. After the usual diagnostic process, Rogers Tech Support deemed the faulty unit and sent on a refurb.
  The replacement unit appeared without a trackball installed; Yes, physically, NO trackball.
  When reported to the customer relations, they were kind enough to send a new replacement... not a refurb.
  When the new replacement showed up... the three clips lacked little in the lid of the battery; amazing!
  Since then, they sent me 2 more... TOGETHER with MISSING battery cover clips!
  During each 'swap', the returned device ALWAYS gets charged to my account $599 + tax... Then I have to call to provide the IEMI and the UPS tracking number... they credits due.
  I have call center people to suggest that another method of exchange of phones... the UPS system IS NOT begging.
  It's time consuming... riddled with error and, apparently, is devoid of ANY quality control.
  Yes, I'm a little frustrated. I understand that any rep Rogers I speak with works from a script and limited (if any) ability to be creative in the evolution of a broken process.
  So my question here is... does anyone have any suggestions?
  I long to the point of wanting to just 'devil' do with Rogers... nobody seems to have the power to help and there is little to be gained in dumping on a call center representative.
  The advice Rogers are mine to contact RIM directly, so this announcement. Are they passing the ball?

  augarusa wrote:

  The advice Rogers are mine to contact RIM directly, so this announcement. Are they passing the ball?

  Hi and welcome to the Forums!

  Indeed, they are... in addition to a...

  These forums are a chain of support to users, not a conduct of user-to-RIM. Frontline for BB is, contractually, not provided by RIM. Companies and authorized resellers are responsible for the front line of official support to end users. It is possible to bypass your carrier and request direct assistance from the RIM, but this generates costs, since you are without your support contract with your carrier. The "Support & Services" tab to the top of the forum pages provide information on this subject. But, if you go through your carrier for support, they can degenerate into RIM without cost to you if they choose to.

  Good luck!

• Unable to stop comments and vMA host

  Hi all

  I installed ESXi 4 then vma on esix. Now I am trying to stop all the guest operating system and then host through vM.I am using the script ghettoUPSHostShutdown.pl (check the link http://communities.vmware.com/docs/DOC-11902.

  but when I am trying to run this script, I get following error-

  VI-admin@localhos $./ghettoUPSHostShutdown.pl--host_operation stop - stop - ups_vm MAS vm_operation - timeout 5

  = GhettoUPSHostShutdown.pl START =.

  Info: UPS_MONITORING: vMA

  Info: VM_OPERATION: stop

  Info: HOST_OPERATION: stop

  Info: HOST_LIST: AUTOMATIC

  info: ==========================================

  Info: found host: "IP ADDRESS OF ESXi HOST HERE.

  Debug: Hand: Login by vi-fastpass at: IP ADDRESS OF ESXi HOST HERE

  Info: start the stop on the VMS operation...

  Info: hard power off power Fedora12, no Vmware tools on...

  Info: unable to hard power off of the Fedora12!

  Info: closure of vSphere Management Assistant!

  Info: cannot stop vSphere Management Assistant!

  Info: shutdown complete operation!

  Debug: Hand: Disconnect: IP ADDRESS OF ESXi HOST HERE

  Info: check all virtual machines are either suspended or powered-DELAY set on: 5 min

  Debug: Login by vi-fastpass at: IP ADDRESS OF ESXi HOST HERE

  Info: host: IP ADDRESS OF ESXi HOST HERE has 2/5 VMs still lit!

  News: County: 1 - sleeping for 60secs...

  Debug: Login by vi-fastpass at: IP ADDRESS OF ESXi HOST HERE

  Info: host: IP ADDRESS OF ESXi HOST HERE has 2/5 VMs still lit!

  Info: Count: 2 - sleeping for 60secs...

  Debug: Login by vi-fastpass at: IP ADDRESS OF ESXi HOST HERE

  Info: host: IP ADDRESS OF ESXi HOST HERE has 2/5 VMs still lit!

  News: County: 3 - sleeping for 60secs...

  Debug: Login by vi-fastpass at: IP ADDRESS OF ESXi HOST HERE

  Info: host: IP ADDRESS OF ESXi HOST HERE has 2/5 VMs still lit!

  Info: Count: 4 - bed for 60secs...

  Info: host: completed verification step!

  Info: put the hosts in "stop" mode

  use of uninitialized value in string on line 236 de./ghettoUPSHostShutdown.pl.

  Info: ERROR:

  SOAP fault:

  Error string: error. RestrictedVersion.summary

  Lack of details: RestrictedVersionFault

  Info: IP ADDRESS OF ESXi HOST HERE is now closed!

  Info: finally put UPS tracking VM host int o in "stop" mode

  Use of uninitialized value chain eq /usr/lib/perl5/site_perl/5.8.8/VMware/VIFPLib.pm line 355.

  login_by_fastpass: host name can not be empty in line /usr/lib/perl5/site_perl/5.8.8/VMware/VIFPLib.pm 355.

  Help, please...

  At this vMA 4.0 or 4.1 of vMA and you use ESX(I) 4.0 or 4.1? The script currently supports 4.0 only as it some major changes that currently breaks the script. Also the error tells me too that he is unable to identify targets for the table vi-fastpass... can you also run the following command and provides the output:

  vifp listservers
  

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• 2 pop Ups When I on my laptop Fujitsu T4220 - open file security warning

  IM using a Fujitsu T4220 Tablet. I had to reinstore my os, Win Vista.

  Now, whenever I start my laptop there are 2 appears that appear.

  1 pop up is:

  Security warning opening the file

  Name: C:/Windows/System32/hkcmd.exe
  Publisher: Intel Corporation
  Type: Application
  From: C:/Windows/System32/hkcmd.exe

  The 2nd jump upwards is:

  Security warning opening the file

  Name: C:/Windows/System32/igfxpers.exe
  Publisher: Intel Corporation
  Type: Application
  From: C:/Windows/System32/igfxpers.exe

  I have 2 possibilities to run or cancel.

  One can help to to get rid of this 2 pop ups plx.

  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and install and run Autoruns and go to the tab all and check the files referred to in your message.  If you find them, uncheck the boxes to keep them from start to start, and then click OK.  Reboot and messages should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Start in safe mode with network and see if the problem is here.  A result allows us to narrow down the search for the cause.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Establishing monitoring on nine Dell UPS who do not card management

  Goal : track on nine Dell UPS who do not card management.

  • Dell UPS 1000W x 8
  • Dell UPS 3750W x 1

  Is it possible to Garland USB ports serial (RS - 232) on Dell UPS?  Trying to get tracking via the installation of management software Dell UPS on eight Dell UPS 1000Ws and a Dell UPS 3750W.  The eight UPS are racked together, but none of them have an installed management card.  I'm trying to figure if it is possible to Garland USB or the ports series, or do I need to connect each ups its own USB or serial port on a server/PC?

  

  Thank you!

  Hi bezoid,

  Daisy chaining the devices is not supported. USB and options series are designed for a single connection. You can try a USB hub or a switch to serial port, but these have not been validated and may not work properly with the multi UPS management software.

• When I put an and THE points in my timeline first I run the risk of deletion of an entire track of clips. Is there anyway I can percentage it?

  I lost a lot of work because of this. I keep large enough back ups, so, fortunately, nothing is lost except a few hours of work. I tried for a few years to be super careful and I just delt with having to rebuild the areas, but the project I'm on in this moment is really wide, and I've had a client several times now, pointing out that things are missing that we had worked on. This reflects very badly on me.

  Thank you

  Heath

  Heath,

  Sorry that I misunderstood your question.

  the Erase function while using IN outs is useful for some people, but I've never used

  check my track targets so I delete not hundreds of hours of work.

  Ah, I see what is happening now. Unfortunately, this is how most NLE works in general. If the securities are covered, the clips are subject to deletion between In and Out of brands. With this power can actually work in your favor in many cases. For that matter, what I would focus on creating and memorizing keyboard shortcuts allowing you to alternate selection and locking.

  That said, I share your frustration that NLE is always the way you want to. If you really can't stand this behavior, you can still file a feature request.

  Other than a feature request, the only solution of continuously improving your workflow around the application works to make less mistakes. Memorize shortcuts keyboard, expansion and contraction of the user interface according to your current task, are examples of using the simple methods to help you work faster and more efficiently. I've been publishing for decades and always find ways each day to save time, especially measures relating to repetitive tasks.

  I call NLE editing "dance on a gimbal. What I mean is that you don't have to pay a lot of attention to your physical actions as you perform the operation of the brain of the edition. As an editor, I do most of the errors when my brain wants to go faster than my hands and I make mistakes such as the removal of clips, that I didn't. If you make mistakes, slow down a little and be more deliberative in your edition of keystrokes and mouse movements. Of course, Ctrl/CMD + Z is your friend. Please also familiarize yourself with the history panel and make sure that your automatic backup works. Do save money for your project as often as you like, as well.

  Please feel free to comment or ask questions.

  Thank you

  Kevin

• First 14 elements works only with multi audio track of the video.

  Hello

  I hope someone can help me with this.

  So I record videos of gameplay on a Hauppauge HD PVR 2 Gaming Edition. I use several audio tracks in the video to keep the sound game and separate voice narration. The audio encoder for video is in MPEG Layer 2. In Adobe premiere pro CS6 when I would drag the video that it would fill game audio is as well as the audio from the voice, but the trial more I bought buy items 14 first thought it would be similar. But whenever I drag the file in audio voice is not and will not be displayed.

  So am I missing something? or elements first are which? Because then I have to look back and got to spend like $230 dollars for Adobe premiere pro CS6.

  elements has forced me to use a single audio track, its fine, but without the ability to split into multiple tracks, I lose quality and which would not work on several set ups audio. People of example 4 recording of sequences of separate devices. so I returned it to London Drugs for a refund. but now its impasse on my saying account I've owned it yet. Well.

  Thanks for trying to help.

• When you send a PDF with Adobe send & Track, it cannot be considered an iPhone

  When you send a PDF with Adobe send & Track, it cannot be considered an iPhone. When customers try to access the pdf file by clicking on the link in the email, they get an empty browser window.

  Noted in the FAQ to send & track a person receaving a pdf link should be able to preview and download the pdf of the computer, tablet or smartphone, but that doesn't seem to be the case.

  Solutions or comments on this?

  Thank you in advance.

  Hi tkr.

  On your iPhone, which is the web browser that you are using?  Is - Safari (web browser by default on iOS)?

  If so, if you try the following steps?

  1. Go to the home screen.
  2. Press settings.
  3. Scroll down to find Safari in the left pane.
  4. Tap on Safari.
  5. Disable "block jump - rises" (i.e. allow pop-ups).
  6. Restart Safari.
  7. Click on the link to open the PDF file.

  Please let us know if it works for you.  Thank you.

• Adobe Flash player and malware pop ups

  Help Adobe!

  I get the pop-up windows of "you don't have the latest flashplayer.

  I go to the Adobe website and download and now I get this "Media Downloader 12.2" it just slow down my machine and I'm a swamp of pop ups!

  I removed the installation... and now I have no access to all Web sites that require flash.

  I have download the appropriate and this update installation "Media Downloader 12.2 pop up ' piggy on that support.

  THIS IS A HUGE DRAWBACK... Help, please!

  Hello

  "Media Downloader 12.2' is not a product that is bundled with the installer of Flash Player."  It is possible that you have clicked on a malicious pop-up and have been redirected to another site.  We are aware of this people and followed on issues when we hear about them. Some of these malicious pop-ups and sites make great efforts to look like official notifications, Adobe and installation dialog boxes.  What is the site you went to download the Flash Player? I will forward the site to people appropriate for tracking on. If you are able to reproduce the pop-up dialog box, please take a screenshot and post it here.

  In the meantime, you can download Flash Player directly from one of the following locations:

  • Installation problems | Flash Player | Windows
  • Installation problems | Flash Player | Mac

  At the bottom of the page, in the section 'Problems', there will be links to download different types of plugin based on your browser.

  --

  Maria

• removed the audio tracks in logic pro can be restored

  removed the audio tracks in logic pro can be restored, has been save logic & empty folders to the folder came, I deleted the originals by mistake...

  Not if you don't have the original audio files on your hard drive.  If you have deleted original, your only hope he then restore from a backup of your system, you have a.

• Safari Pop ups

  If you use safari on my MacBook pro suddenly I was blow - get up on it. He was claiming that his Apple. How to stop getting the pop-ups! I've updated my software to the new

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.