URGENT HELP NEEDED: How to reset the Editor window title?

Similar Questions

• Help! How to reset the CMOS on 3000 N200 model 0769?

  Hello

  I need to reset the CMOS (the memory that contains the BIOS settings) on my laptop Lenovo 3000 N200 model 0769. Is it possible to do it without having to remove or the CMOS battery to short physically?

  If I have to remove the battery, where is he? On other models of 3000 N200, the battery is under the keyboard and is removable (shown in the video on www.lenovoservicetraining.comand maintenance manual). However, for the model 0769 there no specific information. Page 99 of the service manual for the 0769 (42 x 3353 - 02.pdf on the Lenovo site) has a graph that shows what might be the CMOS battery near the right side of the main Board. Unfortunately it may well be soldered to the card, not removable.

  Can anyone confirm if the CMOS battery is soldered to the motherboard?

  It is possible that the CMOS is corrupted so that the POST/BIOS Setup screen does not appear. In this case, you need to reset the CMOS manually, for example by removing the CMOS backup battery, "a brick" laptop.

  Fortunately, there is a way to reset the CMOS for the Lenovo 3000 N200 0769 model, which does not require the battery to remove or disable welded. It is not documented in the maintenance manual, but it can be extremely useful. If your machine sounds just a few times when you turn it on (Nothing on the screen, otherwise machine appears dead), it should reset the CMOS because that could save you having to RAM of the laptop, or pay $$$ for the out-of-warranty repair.

  Turn off the laptop, remove the battery and the AC adapter / CC. Remove the access panel that covers the hard drive and the wireless card. Look at the corner of the CCP in the front of the wireless card. There are two metal tracks exposed labeled CLRP1. You must bypass these tracks together for a few seconds.

  You can use the end of a small head screwdriver flat metal or if you have a multimeter set it to measure current and put a probe on each track.

  After doing this the laptop must turn on correctly. He will tell you that the time and date is not defined, and that the CMOS checksum is bad. This is normal when the CMOS was reset. Press F1 to access the menu.

• BlackBerry classic help! How to reset the password for the device

  I tried to change my password for the device, and then I pressed cancel. I changed head to change my password.   My phone has allowed me to use my original password. The next morning, I typed my password and the phone kept saying incorrect password.  How I change my password for the device?

  When you get to 5 or 6 incorrect attempts the device prompts you for blackberry. This is a safety feature to avoid wiping the device accidentally, and also so that you can see if you enter characters, you think that you enter.

  See if the device is to invite you to enter blackberry. If so, do it and then you should power try again the password.

  And if you left the password change and that he has not really changed the password, then your password is always the same as before, no different. Be careful and make sure that you enter the characters that you intend to enter.

• How to reset the Master encryption key in the encryption Transparent data...

  Hello

  I use Transparent data encryption in Oracle Database 11g Release 2.

  After having specified an Oracle Wallet location in the sqlnet.ora file as shown below:

  
  

  ENCRYPTION_WALLET_LOCATION =

  (SOURCE =

  (METHOD = FILE)

  (METHOD_DATA =

  (DIRECTORY = D:\Oracle\enc\admin\tde\wallet)

  )

  )

  Created the master encryption key using the statement

  SQL > ALTER the ENCRYPTION KEY SET of SYSTEM IDENTIFIED BY 'Abc123def456 ';

  Modified system.

  When I reset the master Encryption Key by using the statement get an error as shown below:

  
  SQL > ALTER the ENCRYPTION KEY SET of SYSTEM IDENTIFIED BY 'Easy2rem ';

  ERROR on line 1:

  ORA-28353: cannot open portfolio

  Please help me how to reset the master encryption key.

  Kind regards

  Kalashnikoff.

  Hi currently,

  you need to reset the master encryption key by using the exact same statement:

  CHANGE the ENCRYPTION KEY SET of SYSTEM IDENTIFIED BY 'Abc123def456 ';

  
  

  The passworsd you provide is only the password of the portfolio, the MK is not derived from this, but

  using a secure random number generator, the Wallet password can be changed separately

  using owm or orapki.

  
  

  Greetings,

  
  

  Damage
  

• How to reset the cache of plist on a Mac?

  Hello

  How to reset the cache of plist on a Mac?

  So that the com.adobe.CSXS.6.plist file is reloaded?

  Thanks in advance

  I found it! OSX - how close cfprefsd so that I can update Flash on the mavericks - ask different

  This linked page is not my problem, but what I need how to reset the cfprefsd

  Thank you

• Need help on how to use the conference room in adobe connect

  I need help on how to use the conference room in adobe connect?

  I would recommend you start here: Getting Started with Adobe Connect - Adobe Connect user community

• How to reset the password forgot Windows user account

  I need Toshiba password reset! How can I reset Toshiba laptop? I know you if you help me Toshiba password recovery, etc. Well well, so often to address these issues in our lives. Today, we share a few ways to reset the password of Toshiba.

  Solution1: Toshiba recovery disks help reset lost password

  It only works if we have created the CD or recovery discs before that we have forgotten the password. The next appearing is the steps to reset the Toshiba Windows 7 recovery disk:
  a. start the PC, log on to Windows 7 and insert a USB flash drive in the driver.
  b. start-> Control Panel-> user accounts and of the safety of the family->-> create a user accounts password reset disk.
  c. in the Welcome screen click Next and select the inserted USB, click Next.
  d. Enter the password in the password field and click Next. When the progress indicator displays 100% complete, click Finish to exit. Remove the driver USB of PC.
  The method is similar to create a Toshiba restore CD. Now the password of Toshiba Windows 7 recovery disk is ok. Put it in a safe place for people can use to reset your password.
  Steps to recover the password with the created password reset disk Toshiba:
  e. click on reset password in Windows 7 logon window.
  f. Insert the USB Toshiba Recovery disk created in the USB driver interface, and then click Reset password' to open the password reset Wizard. Click next to continue.
  g. Choose this Toshiba USB drive recovery in the drop-down list. Click next to continue.
  h. enter a new password and re-enter a second time to confirm. Click next and finish to close the wizard.

  Option2: Reset Toshiba laptop for accounts with administrator rights

  If there is default or built-in Administrator account or other accounts with rights and administrator privileges, we can use it to Toshiba bypass password. Take example of Toshiba XP Recovery:
  System A. Boot mode safe mode by pressing F8 when PC stars.
  B. PC access by the available account with administrator rights and of privileges.
  C. start - users and groups lusrmgr.msc in the search ENTRY - local users and groups - box choose users.
  D. make a right-click the account with password unlocked, select set the password and enter and confirm the new password.

  Solution3: Toshiba Reset password with the ISO image file burn

  We can burn .iso on a bootable USB stick or a CD/DVD disc image file and reset the forgotten password quickly and easily. Take one of the most popular tool to reset the Windows Ainorsoft Windows Password Recovery password as an example:
  a. download the program from an accessible PC;
  b. burn the file .iso on a blank CD/DVD or USB drive.
  c. work around the lost password of Toshiba with the CD/DVD on the PC locked.

  Things will be difficult if we know the methods of Toshiba pass reset once we forgot password for Toshiba laptop! Be sure to share them with your friends!

  Thanks for sharing this, but we always talk about password of Toshiba, it won't and I think this might be a bit confusing, it is of a workaround for the windows user account password.

  As much as I know there is no password defined by Toshiba.

  The user can define the user account password in windows if necessary so that this workaround solution describes how to remove a user account Windows password that is common to all computers with the preinstalled Windows operating system.

  However, thanks for posting ;)

• ProBook 4320 s: how to reset the bios password

  Hi guys, I Don t know if this thread is in the right place, if not mods can move.
  
  I need to know how to reset the password of the bios for HP ProBook 4320 s.

  @Spaha

  I couldn't find one in the warehouse so I did not test this.

  Contact HP and they should be able to send you a file custom SMC.bin that you can use to reset the password at startup.

  http://welcome.HP.com/country/W1/en/contact_us.html

  When you talk to the HP rep ask them to increase your service request.

  Or download these files.

  https://www.dropbox.com/sh/zu4kdgxm052l87d/AAAMi-kfX4AVH8oTCbsOM4X9a?DL=0

  Insert a clean USB flash drive.

  Then run USB Image tool.

  Choose the flash drive, and then click RESTORE.

  Remove the flash drive after the restore.

  Insert a locked in a portable flash drive and boot. "If the HARD drive is installed remove before start".

  At C:\OUTPUT, type CD... "And then press ENTER.

  HPBR of type "and then press ENTER.

  First thing is to save your settings.

  Select 3 # re-program.

  Press "S" to save the system information.

  Type HPBR and press ENTER.

  Given that your model is not listed, select "SHOTGUN".

  After the reboot, repeat 'SHOTGUN' a second time.

  I would like to know the result, so I can update my list.

  Some instructions here. "If you can't boot from USB there are instructions for making a bootable HARD drive."

  http://mazzifsoftware.blogspot.com/2014/01/HP-BIOS-d ebloquer-for - dos.html

  Additional help here.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility?s=ad18a86dbbaf34999e22b1225a42a395

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  

• OfficeJet 8620: How to reset the touchscreen scanning identification number

  Each email address on the option of scanning to e-mail has a security of the PIN number.  At least one of the users has entered his PIN code incorrectly and that you don't remember.  How to reset the PIN code or remove the users e-mail address?

  Hello @Harbourne,

  Welcome to the HP support forums.

  I understand that you want to reset a pin code or delete an e-mail address of the analysis to the function of e-mail on your Officejet 8620.  I would like to help.

  There are two different versions of scanning to e-mail.

  The first is a related software. You want to reach scan then scanning to email to access this version.

  You need to reset this version from a connected computer that the software is installed or printers EWS (embedded Web server).

  The other version is accessible by the touching Apps can Scan to e-mail.

  This version may be invited for a reset of the front PIN.

  This version will allow no allows you to delete emails on both.

  It's all or nothing.

• How to reset the computer to start the boot minimum troubleshooting.

  I posted this screenshot because I have no idea what can be the maximum size of a question and I thought I have copy paste this but I to Sir's life saw the question so I did this. Additional information that could help. This is my task manager open resource monitor and windows firewall not wanting to tk starts. And I have windows updates where I chose to update (I try to deny each update.) And so far I've checked that I have 482,5 MB of updates of windows that say I should put to date. (apperently 130 important and 10 optional) in addition apperently my computer don't think that I am administrator I do not understand when I'm the only profile on the computer.

  Hello

  In response to the information provided by you, please try to follow the methods and check them off below if this can help,

  Step 1: Scan of Sfc.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Follow the steps below to perform a scan of the SFC.

  1. press the Windows key + X key.

  2. Select prompt (admin).

  3 type the following command:

  Sfc/scannow

  Step 2: Clean boot.

  Make your systemclean boot State helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  https://support.Microsoft.com/en-us/KB/929135

   

  WARNING: After troubleshooting, refer to the section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Please let us know if the problem is resolved or you need additional assistance.

  Thank you.

• How to reset the password for CC? -My former CC password does not work. I can't find that link 'forgot my password' My Adobe password does not work in CC

  How to reset the password for CC? -My former CC password does not work. I can't find that link 'forgot my password' My Adobe password does not work in CC

  Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

• How to reset the clock?

  New on this computer, may not know how to reset the clock... not come to book with this refurbished.

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• How to reset the password forgotten for the Airport express

  I hid says on my airport express and I don't remember the password for it. How to reset the password

  If you have the version 2 ports of the AirPort Express, connect your computer directly to the LAN <>- Express port to see if you can access this way AirPort Utility.

  AirPort utility is as follows on your Mac: Finder > Applications > utilities > AirPort Utility.

  If you can 'see' the AirPort Express in this way... click on the image of the AirPort Express

  Click Edit in the window that appears

  Click on the menu on the Basic Station ... to the top of the screen, where you see the icon Apple, file menu, edit the menu, Menu Help window menu, etc.

  Click Show passwords and you will see your forgotten password

  

  If you are unable to access the AirPort Express Terminal using wired Ethernet, you can reset the password using one of the methods described in this excellent forum Tesserax an expert user tip.

  Airport - access to forgotten passwords

• C5150 - how to reset the printer to clear the network password?

  I bought a C5150 which had been used as a screen.  I'm unable to access the built-in web server network setting.  Reset the printer to the factory setting, of the façade has no effect.  There are no instructions to all documentation on how to reset the printer.  Help!

  I guess that you did not read my * last * post here, which has been designed for you. in any case...
  
  PhotoSmart C5100
  -Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
  -Press "OK".
  Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)
  
  TO MAKE RESET "Half full" in the HELP MENU:
  
  -Use the > to scroll to 'Resets the Menu' and press 'OK '.
  -Put "Full Semi" highlight Reset and press 'OK '.
  -Unit will shut off by itself in 3-5 seconds
  -Power and then turn it back on by button / stop
  -Leave the print alignment page - do NOT cancel
  -Allow to go through maintenance and Photosmart screen (normal)

• I have a MN700 router for my wireless. How to reset the password?

  I have a MN700 router for my wireless. How to reset the password?

  I contacted Microsoft via the phone, but because they no longer carry this point they couldn't help me.

  Hello

  1. what operating system is installed on your computer?
  2 did you change your computer, after which the issue started?

  Here is the manual for the device...

  http://download.Microsoft.com/download/b/6/9/b69c956c-85d9-4641-aa6f-1548391e0967/mn700_base_station_configuration_guide.PDF

  Reset the router and set it up as if it was the first time. Then, you can simply choose a new password and security settings.